Evo 3D discontinued

Hello, I got my Evo 3D when it first came out. Since then ive had over 4 diffrent devices because each one kept breaking, first time softwear, then microphone didnt work, then camera didnt work, then network came in and out. I've had my 5th device since January. Now, the battery barley last 4 hours, and I have advace task killer running everytime i turn my screen off, and battery saver, plus the outer fram is comming off. I am going to my local best buy but I am moving so I have to wait till the move to get my phone. I was looking into the phone though, and I saw that Sprint has discontiuned the Evo 3D since April. I was wondering if this would affect me fixing my phone, since their are no more being sold.

Just FYI, I'm an Evo user and I've used Advanced Task Killer the entire time. It's good at what it does, but it does not do anything to improve battery life. It does free up memory, but there's nothing actually running/using processor cycles when an app is loaded but not active. Using ATK to kill apps actually increases battery use because every time you go back to that app, it has to load up again from start rather than just accessing it in memory.
Sorry if that's a bit technical, but I wanted to let you know how android handles the multitasking. Four hours is still crummy battery life, but ATK won't improve it.
I do not now, nor have I have, worked for Best Buy. I have only supported them with a very expensive electronics and musical instrument habit.

Similar Messages

Possible to re-add discontinued app (.ipa) to iTunes?

This requires some introductory info:
Many months ago, an iPad app that I use regularly was removed from the App Store. It continues to function perfectly well, but yesterday, it had trouble connecting to its servers.
Last week, after installing iOS 7, I'd had a similar problem with the YouTube app: It would launch, but never connect. I solved that problem by deleting and re-downloading the YouTube app. So, yesterday, I did the same with the aforementioned app -- forgetting that it had been removed from the App Store and couldn't be downloaded again.
The developer of said app also has an iphone version, which I run on my iphone. But they've never replaced the iPad app that was removed from the store, which is why I've been running the old version.
Finally, in an attempt to manage the 1,100+ apps that sit in iTunes, I routinely go through and delete apps I don't need (or don't think I need). Since the icons of the aforementioned iPhone and (discontinued) iPad app were identical, at some point I deleted the iPad app from iTunes, not remembering, at the time. my reason for keeping the older one.
The good news:
Using Time Machine, I was able to roll back, retrieve the deleted iPad app, and restore it to iTunes' Mobile Apps Folder.
The bad news:
I thought restarting iTunes would cause it to "see" the previously purchased app that was reintroduced to the folder, but it does not. It appears that once you delete an app from iTunes (and move it to the trash, versus choosing the "keep in my library" option), iTunes completely severs all ties to that app -- even though you purchased it legitimately. I thought apps would be "discovered" at launch, just as songs you add to the iTunes folder are "discovered."
Short of using Time Machine to replace the entire iTunes folder (which would be an epic nightmare) is there any way to get iTunes to "see" the app I retrieved? Is there one document, perhaps, that iTunes uses as it's app "registry" that I could restore via Time Machine, in order to "bless" that app again? Of course by rolling that document back, I'd be rolling back to a point that's *before* current apps were purchased. Many, many current apps. So, this is quite a conundrum. But I really need that app back, so I'm willing to try anything. I'm running iTunes 11.1.
Suggestions?

pluggedin2 wrote:
Syncopator, how did you retrieve the app from Time Machine? I thought it would be fairly easy to do but I'm not finding the app I need. Thanks for any light you can shine on this!
Actually, it is easy. :-)
You have to start by viewing the folder that contained the item you want to restore. (Or navigate to that folder in Time Machine.)
That folder is:
~/Music/iTunes/iTunes Media/Mobile Applications
(The symbol "~" is shorthand for your home folder, which you can access from the sidebar in a Finder window.)
I can't provide a full tutorial on Time Machine, but you might want to see the section "Restoring Data from Time-Machine backups" on Apple's support page, here:
http://support.apple.com/kb/ht1427

How to Properly Protect a Virtualized Exchange Server - Log File Discontinuity When Performing Child Partition Snapshot

I'm having problems backing up a Hyper-V virtualized Exchange 2007 server with DPM 2012. The guest has one VHD for the OS, and two pass-through volumes, one for logs and one for the databases. I have three protection groups:
System State - protects only the system state of the mail server, runs at 4AM every morning
Exchange Databases - protects the Exchange stores, 15 minute syncs with an express full at 6:30PM every day
VM - Protecting the server hosting the Exchange VM. Does an child partition snapshot backup of the Exchange server guest with an express full at 9:30PM every day
The problem I'm experiencing is that every time the VM express full completes I start receiving errors on the Exchange Database synchronizations stating that a log file discontinuity was detected. I did some poking around in the logs on the Exchange server
and sure enough, it looks like the child partition snapshot backup is causing Exchange to truncate the log files even though the logs and databases are on pass-through disks and aren't covered by the child partition snapshot.
What is the correct way to back up an entire virtualized Exchange server, system state, databases, OS drive and all?

I just created a new protection group. I added "Backup Using Child Partition Snapshot\MailServer", short-term protection using disk, and automatically create the replica over the network immediately. This new protection group contains only the child partition
snapshot backup. No Exchange backups of any kind.
The replica creation begins. Soon after, the following events show up in the Application log:
=================================
Log Name:      Application
Source:        MSExchangeIS
Date:          10/23/2012 10:41:53 AM
Event ID:      9818
Task Category: Exchange VSS Writer
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      PLYMAIL.mcquay.com
Description:
Exchange VSS Writer (instance 7d26282d-5dec-4a73-bf1c-f55d5c1d1ac7) has been called for "CVssIExchWriter::OnPrepareSnapshot".
=================================
Log Name:      Application
Source:        ESE
Date:          10/23/2012 10:41:53 AM
Event ID:      2005
Task Category: ShadowCopy
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      PLYMAIL.mcquay.com
Description:
Information Store (3572) Shadow copy instance 2051 starting. This will be a Full shadow copy.
=================================
The events continue on, basically snapshotting all of Exchange. From the DPM side, the total amount of data transferred tells me that even though Exhange is trunctating its logs, nothing is actually being sent to the DPM server. So this snapshot operation
seems to be superfluous. ~30 minutes later, when my regularly scheduled Exchange job runs, it fails because of a log file discontinuity.
So, in this case at least, a Hyper-V snapshot backup is definitely causing Exchange to truncate the log files. What can I look at to figure out why this is happening?

PTCL EVO USB Device Installation and Configuration (EVDO CARD)

*PTCL EVO Installation on MAC Book PRO , Mac Book Air EVO*
Problem:
USB not getting detected on MAC book pro and Mac book Air.
Resolution:
*DO not Insert the EVO CARD until you perform the below:*
*Getting the driver:*
*Option 1 :*
http://ptcl.com.pk/contentb.php?NID=327#drivers
Select the device you have and download MAC driver from the download section on the page.
*Driver Option 2:*
ON windows os insert the EVO device detect the USB disk with drivers one of the driver is for MAC (dmg file) copy it on a simple Flash disk.
*Installation on MAC:*
Double click the downloaded driver (Option 1)
run the setup.
or
on your MAC Insert the Flash Disc on which you copied the driver (Option 2) it will detect a media storage and then run the driver from there. Once you have the driver installed you will see an EVDO Icon in the menu.
*NOW insert the EVDO USB in MAC it will be detected as a modem / network device.*
*TRICKY PART:*
EVO software does not work on MAC so you need to configure a manual connection.
Go to network settings from the top panel under WIFI click advance settings. A new menu opens up you will see 3 or 4 new devices. you need to configure the EVDO Card Terminal only thats the first in the list.
*Do not configure any other device.*
*Config Settings:*
phone number: #777
User: [email protected]
Password: ptcl
*Do not change any other settings.*
Click connect and within seconds it will connect.
It works fast and reliable for all wimax services location is very important it is dependent on the signal strength. EVO is the best choice for people on the go as it works across Pakistan in 350 cities. no other service can match this.
Please note I am not from PTCL or any affiliation with them. Check my website for more details…
+*H A P P Y - S U R F I N G*+

Hey Mark
You didn't happen to change the IOMMU setting in the UEFI did you? I have just got a M5A97 EVO and been having problems.
This UEFI interface finds the usb devices fine but the kernel will not. I found that if I flash the bios it reset things and appears to
just compare the flash if it is the same. Afterwards the usb works. However I still trying to narrow it down myself. I've tested with
0402 0810 & 0813 just released. All do the same thing with regards to usb 2.0.
Jonathan
EDIT:
After testing it appears to be connected to the linux nvidia blob & IOMMU settings conflicting.
Last edited by jeisom (2011-11-23 15:00:00)

Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO

I have a brand new:
i5 4570
MSI Z87-G45 Gaming
250GB Samsung 840 EVO
1x 8GB Corsair ValueRam DDR3 1600
I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
Bios settings are okay, everything is recognized
USB Legacy - Kingston Datatraveler
HDD Legacy - Samsung 840 EVO
Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
What I've tried so far:
Switch out the SATA cables and power cables
Switch through the various SATA ports on the MB 1 through 6
Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
Update UEFI to V 1.50
All the above result in the case mentioned.
I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
What am I missing here, I would really want to install Win7 instead of Win8
Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
Any clues, tips, hunches??

Quote from: Bernhard on 25-October-13, 18:33:41
Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
Hmmm not sure, thanks for the reply, will have to look into that later today!
I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
::EDIT::
Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued

Imessage is buggy, i can login to it but does discontinues to verify and goes back to the login page,

The problem with imessage with me and same thing too for my facetime, i can login but discontinues to verify and goes back to the login page. This is the second time where imessage is not working, the first time was "Unable to verify email" error, but i manage to solve it by just restarting my ipod. The second time, restart doesn't solve the issue, i wonder the iMessage app is pretty buggy, or servers are busy etc. I need help on this, does anyone has the same problem?

Restore in iTunes. See
http://support.apple.com/kb/HT4623

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT

Memory Problem With 4gb Crucial Ballistix and Asus M4A785TD-V EVO

motherBoard: ASUS M4A785TD-V EVO
bios Version :2005
Video: amd hd5750
Processor: AMD PHENON II X2 550 3.100MHZ
Memory: Crucial
Modele Memory: blt4g3d1608dt1tx0
Capacity: 4GB
greetings to all
i have asus m4a785td-v evo mobo. i ve bought 4 gb crucial ballistix ram today. it says on product its 1600 mhz and cl8 but it shows on my pc 1333 mhz and cl9. when i was searching for this problem i came across this topic: http://forum.crucial.com/t5/Crucial-Ballistix-gaming-memory/Memory-Probleme-With-8GO-Crucial-Ballistix-and-Asus-M4A785TD-V/td-p/9464 can i apply the same settings? how can i fix that? is it possible via bios settings? thx in advance and sry for my bad english. here is some screenshots:

I am not good at RAM setting but the 'Timings Table' shows there is XMP-1600 profile available so I believe it would be enough to turn on that memory profile in BIOS.

I am trying to install Adobe Encore, but it has been discontinued. Can I install and activate a previous version using my Single App Premier Pro membership?

I am trying to burn and author a Blu Ray DVD. I do not have a usable version of Encore , as it has been discontinued. I currently have a Single App membership for Premier Pro CC.
I was advised to install Premier Pro CS6 as Encore comes with this package. I did this, and the software downloaded but an error message came up saying my membership had expired. I think this is because I do not have permission to run Preier Pro CS6 using my Premier Pro CC membership. How can I get the software using my current membership? Or do I need to upgrade my membership to a full Creative Cloud membership in order to use Encore?

CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173 (picture first posted by Ann Bens and reposted by Stan Jones)

Why do I get the "iwork discontinued" message when I click on the share feature in pages?

Why do I get the "iwork discontinued" message when I click on the share feature in pages?

If you are using an older version of iWorks, the sharing was, I understand discontinued in July 2012.
New versions of the iWorks suite, Pages etc now have the sharing option, introduced earlier this year.

Trnsfr Rqmnt created via PP for discontinuation mateiral and follow up mat

Hi,
Production order was created and it has PN A which has been set for discontinuation (1) with follow up material B. The effective out date is in the future.
When generating WM Picklist, TR was created for both parts and issued. On confirmation only the part marked with discontinuation was consumed.
How can i not generated TR for the follow up part?
Thanks
Jithin

In the production order components details, there is a column for Discontinuation of the components.
If you do not want the TR to be generated for follow up material, then in the material master(MRP 4) view of the parent component remove the followup material first and then uncheck the Discontinuation column in the order.
If you want to discontinue the parent component from now with a followup material put "5" into the column it.It also has a option of simple discontinuation as "1" where in TR for the followup material will not be generated.

Discontinuation Material in MRP run

Hi,
In our scenario, we are using Discontinued parts with (Discontinuation Ind - 1, Effectivity-out date - Nil) with follow-up material in MRP4 view of MM.
It is observed that whenever there is no sufficient stock exist, dependant requirement is not transferred to the follow-up material during MRP run. However is the same is happening during Material Availability check.
Is there any IMG setting for this to happen during MRP run also.
Thanks in advance.
Parthasarathy P

Hi ,Parthasarathy,
if an item to be disticontinued item , the following must be true.
1. you have to define Discont ind= 1, and followup material in MRP VIEW,
2. Both Discont item and followup items should have same base unit of measure.
3. When BOM of Header Material creation, discontinuation data is maintained for the discontinued item and follow-up data is maintained for the follow-up item -in CS01.
4. Then you have to assign some value for Discontinuation Group in "Discontinuation Data" for your Discot item in BOM. -in CS01
5. Then create a followup group with same value of Discont Group for yourFollowup item -in CS01.
During the MRP run the Dependent requirements of header material will be transferred to Followup item if it is not enough stock of Discont item.
Please check your Discont data has defined in BOM. The value of Discont group and follow group should be same.
please letus know for further doubts...
regards
pradeep

Discontinuation functionality with production orders

Dear Guru's,
Can anyone please confirm: is the functionality for discontinuation of a material (including follow-up material) not available with production orders?
Example: in our system we have component A that is followed up by component B. This is set in material master - MRP 4.
We also have production orders for the upcoming 4 months in our system. If the stock of component A is depleted within these 4 months, we would expect to see requirements (orderreservations?) on component B, but this is not the case.
Thanks for any comments,
Rgds, AJ

Hi
Discontinuation works for Production orders.Couple of Checks needed for both Follow up and Discontinued Materials to arrive to actual problem
1) Base unit of measure must be same
2) Should have same MRP type
3) Not defined as Co-Products
For detailed info pl refer the link
[Discontinuation|http://help.sap.com/saphelp_47x200/helpdata/en/b1/c044d1439a11d189410000e829fbbd/content.htm]
Regards
Brahmaji

Discontinued parts - how include fixed receipts??

In the MRP 4 view , we can set Discontinuation indicator for one material ,and defined the follow-up material.
And the system will transfers the dependent requirements in materials planning to the follow-up material if they are no longer covered by warehouse stocks.
In standard SAP system , When discontinuing parts, the system does not include fixed receipts such as order proposals or production orders if they are after the effective-out date. The system issues the "Please cancel and Receipt" after effective-out date exception messages in Stock/Requirement List (MD04 View)
But we now indeed need the system to include fixed receipts,that is affter the last fixed receipt ,the discontimuting parts begin to take effect!
How to do this? How discontinuing parts include fixed receipts??
Thaks for any replay!

Hi Fei Liu,
The thing is rather simple; the idea with discontinuation is that from a certain date on we don't want to procure material A anymore, but B instead. Nevertheless, if there's any stock left from A I want to use it first.
In this situation, if somebody manually creates a fixed procurement element, like purchase or production order, the system will only create an exeption message for the planner, since by the normal course of the process this should not have happened.
If you have this situation happening a lot, the question is then if you're using the right functionality for your business case.
Regards,
Mario

Discontinuation part management

Dear all,
I need to manage the following case.
A material M1 is replaced with a follow-up material M2 only in one Bill of Material and we neet to transfer dependent requirements for a material component M1 that is no longer in stock (in sufficient quantities) to a follow-up material.
Can you help me?
Regards
Flavia

Hi,
I think once you define the discont indicator and follow up matl in material master for component M1 in MRP4 view , then the component M1 will be discontinued in all the BOMs and the dep reqmts will be transferred to follow up matl defined in either matl master or BOM depending on the priority, once the stock of M1 gets exhausted.
By defining discont group for M1 and followup group for M2 in one BOM , your reqmt will be fulfilled.
(Followup matl M2 will override the followup matl defined in Matl master , if its different from M2)
But , in other BOMs also , the component M1 will be discontinued and the dep reqmts will be transferred to the follow up matl defined in matl master.
Sheik

Evo 3D discontinued

Similar Messages

Maybe you are looking for