Example using drawLine in FullScreen mode.

Hello,
Could someone please give me an example of code using drawLine in Java FullScreen mode. I want to be able to use the Graphics methods drawLine, drawCircle ... in FullScreen mode.
Thanks
Vance.

how well do you understand using graphics in Java?

Similar Messages

Temporarily show tab bar upon switching tabs with the keyboard in fullscreen mode

I use Firefox in fullscreen mode and switch tabs with Ctrl + PgUp/PgDn. I need to peek at the tab bar when I switch tabs, to avoid searching for the desired tab with multiple shortcut presses.
Is there a way to temporarily show the tab bar when I switch tabs with the keyboard shortcut? I want the tab bar to hide again after, say, 2 seconds of no tab switching.

You can try to set the focus to the location bar with Ctrl+L before switching the tabs to make the toolbar and tab bar appear.

Ps CC: Color Shift On Second Monitor When Using FullScreen Mode

I have been suffering from a new issue since re-calibrating my external NEC Multisync monitor with an i1 Pro calibrator.
Though colors across the system as a whole are improved over similar calibrations with a SpyderPro4, whenever I use the full-screen mode in Photoshop CC (using the F key), the color shifts radically red.
I have tested the other solutions of disabling graphics processing and OpenGL/OpenCL to no avail.
Some testing has revealed that in full-screen mode the colors most-closely resemble the profile for the connected Macbook Pro Retina.
Is Pshop loading the wrong ICC profile just when switching to Fullscreen? I can usually get the correct profile back if I command-tab to another program and back again, but this is an unnecessary workaround.
Any advice would be much appreciated.
Alex

this kind of thing just cannot happen with a high-end Eizo or NEC PA - with these units, there is no video card calibration LUT at all, because it's handled internally in the monitor.
Dag, that's what we expect. But why are the LUTs on the graphics card slightly modified?
The programs Display Profile, Calibration Tester (and Calibration Loader) belong to the GMB ProfileMaker package.
Best regards --Gernot Hoffmann
P.S.:
Perhaps it works like this:
In advance to an actual calibration by ColorNavigator, the program writes these modified values with
equal "deviations" for R,G,B into the graphics card LUTs. Either as a marker or as numerical preparation
for the hi-res correction in the monitor itself.

How to make fullscreen mode work using javascript

1.I want to open the window in fullscreen mode.
It works fine for internet explorer.
But in netscape navigator 8.0 as the tab browsing is there
The menu bar appears on the page.
That i don't want.
2. Also when the window opens in full screen mode and if after that
i press the ctrl+N the new window doesn't open in full screen mode.
Giving the sample code as below.
So how to make it work in full screen mode in both cases.
//The sample code is given
//check.html
<HTML>
<HEAD>
<TITLE> Full Screen </TITLE>
<script type="text/javascript">

</script>
</head>
<body>
<form>
<input type="button" onClick="myPopup()" value="POP!">
</form>
<p onClick="myPopup()">CLICK ME TOO!</p>
</body>
</HTML>Plz help me.
Thanx in Advance.
Reema.

dont try to use a browser for what its not intended to do.
A browser is never been intended to work in fullscreen mode. Trying to control the size a browser is displayed in, is considered bad practice and sites that do it are usually very annoying.

Anyone using the magic trackpad with iPhoto 11 in fullscreen mode?

I love fullscreen mode in the new release of iPhoto. Does the magic trackpad make it more iPad/phone like?

To answer you question, no. I have the trackpad and it does NOT make the experience any different than it is on a laptop. There is NOT any iPad like gestures that are included in the Photo App on the iPad. I thought there would be some but unfortunately there are not magic things LIKE the iPad

In fullscreen mode, is there a way to prevent the page from shifting down when displaying the menu and tabs?

In fullscreen mode (F11), when moving the mouse toward the top of the screen to display the tabs & stuff, the page displayed is shifted down. This makes it annoying when returning down with the mouse - you want to reach a certain link, for example, but your target gets shifted up once the tabs & stuff is hidden back.
Is there any way to make the tabs & stuff display 'above' the page content, like on another layer?

Is it the web page display that is changing its own position, or is it something
about the toolbars that is pushing the page down? I have the same issue with
my browser using an add-on to show a multiple line bookmark bar.

Automatically exit from fullscreen mode when silveright player section or any buttom from control strip click in fullscreen mode.

I have implement an full screen functionality using javascript fullscript api to show page contain in full screen mode and that page have three type of content
a.)smf player xap
b.)dfp ads
c.)social media plugin
that full screen functionality is work perfectly in chrome browser but when I use the mozila browser it create problem during fullscreen mode when any user click on any area of smf player.
For example if i click on fulls screen button that page easily open in full screen mode but if user click on any part contain by the xap contain it automatically exit from full screen mode like if any user click on play button during full scree mode it automatically exit from full screen.

In order to uninstall a possibly unwanted extension, please do the following:
#From the Firefox window click the Firefox button at the top left and select ''Add-ons'', or, if the Firefox button is not shown, click the ''Tools'' menu and click ''Add-ons''.
#Once the Add-on Manager has opened in a new tab, click the ''Extensions'' button on the left side of the window.
#You should now see a list of your installed extensions on the right side together with buttons on the right side of each extension.
#To remove an extension from Firefox, simply click the ''Remove'' button. You should see a message that informs you about the successful removal of the add-on.
#Note that some add-ons require a Firefox restart to be removed completely. To perform a Firefox restart after the add-on removal, click the ''Restart now'' link in the message.
You can find further information about uninstalling extensions in the following articles:
[[Disable or remove Add-ons]]
[[Remove a toolbar that has taken over your Firefox search or home page]]

Problem with Fullscreen mode

Hello. I have problem with Fullscreen mode in Pages 09. Let me explain it. I launch Pages 09 on space nr 4, than i activate fullscreen mode and now when fullscreen is active i switch for example to space nr 2. And what happens? Pages also moves to space nr 2, but i don't want to move my pages to space nr 2. I guess it is a bug in Pages 09. Thank you for your advice.

Hi There
By the sounds of this behaviour you haven't set any space options for Pages within System Preferences (Expose and Spaces Pane). After experimenting with different options this is what I experience:
1. Pages not listed in application assignment in spaces Preferences - Enter full screen in pages, switch from one space to another pages window will follow and exit fullscreen (this sounds like what you are experiencing).
2. Pages set to every space in app assignment - Enter full screen in pages, switch from one space to another and pages will follow but wont exit full screen.
3. Pages set to a single space in app assignment - Enter full screen in pages, switch from one space to another using control and arrow keys pages will pull me back into the space it is set to and will exit fullscreen. Using the control and number keys pages will stay in its set space but upon returning to that space pages had exited fullscreen.
I suggest you add pages to the the spaces application assignment in System Preferences by clicking the plus arrow under the list of apps and select a specific space for pages to open in, once open Pages will only move from this space if you move it manually.
You can send your feedback to Apple via http://www.apple.com/feedback/pages.html if you wish
Hope this helps
J.C

Help with SlideShowPro FullScreen Mode

I have been knocking myself out on this problem for 6 weeks, posted on the SSP Forums, but still no solution.
I now have two test sites posted, they are identical except that one site has all the SSP components programmed to open in FullScreen mode when clicked in the center and the other is programmed to only toggle the display mode (play/pause) without any fullscreen capability. The non-FullScreen capable site works perfectly, but the FullScreen enabled site loses its mind (always in a different way) when returning from FullScreen mode. Even the FullScreen enabled site works perfectly until FullScreen is first activated - after that it is anyones guess what happens next?
Non-FullScreen Enabled Site (always works as expected):
http://www.scottbrackenphotography.com/index.html
FullScreen Enabled Site (never works as expected):
http://www.scottbrackenphotography.com/indexTest.html
Once FullScreen is activated, upon returning to site, sometimes some of the different menu buttons in the site no longer work, or they take you to the wrong section, and pretty much 100% of the time if you click on Subscribe, Prints, Info, or Contact one of the SSP movies will run in the background (and there are NO INSTANCES OF SSP ON ANY OF THOSE MOVIE FRAMES!).
The SSP Tech Support keeps telling me to use the halt(); method. They say my problem is that remnants of the SSP component are being left behind when returning from FullScreen mode in Flash and that the halt(); method flushes those remnants out. I have tried writing the AS3 code 10 different ways to call this halt(); method on an SSP instance, but just get various errors.
Has anyone ever used the halt() method? If so, do you have any code examples?
Thanks!

quzsd,
Thank for the reply, but could you maybe post how you used the halt(); method in an actual function or handler so that I can see how you actually called it in the ActionScript? I am assuming that I have to attach it to a button?

Fullscreen Mode - Failure

Help!...
Since installing J2SE 1.4.1-rc, my fullscreen mode application has stopped working.
I now get the following opengl initialization failure;
"The primary surface could not be created".
I'm running on Win2k. Looks like the application tries to flick to fullscreen mode, but the error comes up immediately.
Also get the same error when running the tutorial example (MultiBufferTest)
http://java.sun.com/docs/books/tutorial/extra/fullscreen/example.html
Anyone else experiencing this?
Anyone got a solution?

Yes ... All fixed.
God I hate Windoze! Removed display adaptor and re-added it. Now using original display card Win2k drivers. Once DirectX 8 acceleration re-enabled (Dxdiag), all working fine.
Have finally got some 1.4.1 fullscreen game routines working and bug 4636548 has been fixed! I can got back to using Forte (at last!).
Thanks for the offer.

How to I get iPhoto to stop opening in fullscreen mode?

Every time I open iPhoto, it opens in fullscreen mode. It's as if there is a setting that has been set for it to do it(though I've checked the settings and there's no such thing). I usually exit fullscreen mode in the usual way and it cooperates, but then sure enough, the next time I open it up, it's in fullscreen mode again. Additionally, perhaps it is linked to this problem, everytime I open iPhoto, it tells me that "iPhoto has detected inconsistencies in your[my] library" and that I should "click Repair to avoid any potential problems". I've clicked repair numerous times but it still gives me the same message the next time I start the program. I've tried deleting the iPhoto plist file and that has not helped either.
Another side note that may be similar is that Terminal always opens in fullscreen just like iPhoto.

Alright, I fixed the problem!
A more in depth description of the process, some credit for its origins, why it works, and how else you can use it can be found here:
https://discussions.apple.com/message/17269094#17269094
But basically, you do the following:
1. Navigate to "~/Library/Saved Application State/"
2. Find "com.apple.iPhoto.savedState"
3. Move it to the Trash
4. Launch iPhoto
Also, to solve the issue involving "Repairing" the Library, I had to navigate to the file "iPhoto library" (in ~/Users/dro8654/Pictures) and edit its "Sharing & Permissions" preferences such that only MY user was allowed to "Read & Write"
This discussion was what helped me with this:
https://discussions.apple.com/message/17261957#17261957

Is there any way to get the black background color back in fullscreen mode?

The current background color in fullscreen mode is grey and it's distracting. It used to be black. Is there a way to change the color outside of the document boundaries?

AndyboyMac wrote:
The only way you can get themes for your ipod is by a jailbrake, jailbraking is illegal, and yes,, you can downgrade your iOS.
Jailbreaking is actually not illegal due to exemptions in the DMCA documentation (http://en.wikipedia.org/wiki/IOS_jailbreaking#cite_note-22).
I've got no explanation on to why the trusty interface for the old iPod style app was butchered, unfortunately (I think we're all at a loss, besides someone being given too much free reign). I came here to supplement the original question with, another alternative question:
Is there a way, similar to downgrading 3rd party apps, downgrade the Music app or restore the old iPod app as an additonal app? Without jailbreaking?
< Edited By Host >

How can I see my movie in FullScreen mode

Hello everyone,
I've converted all my divx and other DVD Rip (home made) with AVS Video Converter Pro in order to import them in iTunes ... I try to see one oh these movies with my Apple TV thanks to my shared iTunes Library ... it's works but the video take only 2/3 of my TV screen ... I've got a 46" and 36" but this problem appear on both.
I want to see my movie on FullScreen mode not only 2/3
I checked video format and it's the same as the original movie (I tried to show this movie thanks to my Playstation 3 and it works in FullScreen .... but I want to use Apple TV for all my music and movies instead my Play Station
So is there any option or anything to do to enable FullScreen mode for my video ... do I have to convert my DivX in an other format ?
Thanks for your help
PS : I've got the last Apple TV and I downloaded the last upgrade early.
Thanks & Regards
Cyril

How can it be possible because the resoution of my video source is the same before and after conversion process ... thanks to my ADSL Box and my PS3 the video is ok ... not with ATV ...
Could you please give me the resolution I should have for my video in SD or HD720 ?
All my video have converted in 768x576 ...
Is there another way to convert my video for iTunes instead AVS Video Converter ?
Thanks all

When in fullscreen mode, bottom of Firefox window ends where Windows Taskbar would be, were it not in autohide mode.

Firefox version: 4
Windows Version: XP-SP3 (automatic updates)
My Windows Taskbar is in autohide mode.
When I launch Firefox in windowed mode and maximize the window, it takes up the entire screen.
When I move my mouse pointer to the bottom of the screen, the Windows Taskbar pops up.
When I select Fullscreen mode in Firefox, the top of the window behaves as it should: Menus disappear, and the toolbar area autohides, reappearing when I move my mouse pointer to the top of the screen.
The bottom of the Firefox window, however, jumps up to where it would be if the Windows Taskbar were not in autohide mode, leaving a black space. While I can move my cursor over this black space, when I reach the bottom of the screen, the Windows taskbar will not unhide, forcing me to use the Windows button if I want to execute some other command.
If I minimize the Firefox window, then select it from the taskbar, it returns to fullsceen mode and takes up the entire screen (no more black space), but I still cannot get the Windows Taskbar to pop up by moving my cursor to the bottom of the screen.
While it may seem nit-picky, this is a dealbraker for me. I set Firefox to run in Fullscreen mode, and expect it to do so properly, without having to go through all of these steps. Furthermore, since I use Windows Start button for everything (my desktop has nothing on it but the Recycle Bin), I often use it while browsing (launching other applications, using the Control Panel, or looking through filesystem, among others).
I am extremely pleased with all other aspects of the browser, right down to the toolbar area not disappearing when my mouse pointer happens to slide off of it after I place my cursor in the search box, and while I would be sad to lose all of these improvements, I will return to Version 3 if I must.
Thank you very much for your time.
~David Morrissey~

I'm sorry, it seems I spoke too soon. The original problem is back: Black stripe at the bottom of the screen. :-(

Macbook pro retina and Fullscreen mode freeze

Hi
I cant get fullscreen playing in FCP 7 on Macbook pro retina mid 2012 running 10.8.3mountain lion
It wil show only a stil image and not play the video live.
This happens on the macbook, and on external monitor, in all display settings available in fcp7. It worked some months ago thou... may there be a osx problem?
Can I go back to earlier osx?
Anyone using 10.8.3, retina, and can do fullscreen mode?
best
thomas

What format sources and what are your sequence settings? I seem to remember that some non-standard formats will not play in full screen mode.
Also, you might try deleting your preferences. I strongly recommend using digital rebellion's preference manager to back up, trash and restore fcp and many other apps preferences.
https://discussions.apple.com/docs/DOC-2491

Example using drawLine in FullScreen mode.

Similar Messages

Maybe you are looking for