Examples for Enterprise Service

Hi All
Anyone can you give some examples of Enterprise serivices.
and
Difference Between ES and Functional Module.
Regards,
Raj

Hi,
you can create "normal" web service out of function modules.
Enterprise Services are first modelled in the ESR and then implemented in the NWDS or the ERP.
You can browse for Enterprise Services.. https://www.sdn.sap.com/irj/sdn/explore-es
SAP provides an environment where you can test the enterprise services...
regards

Similar Messages

Need an Example for Enterprise Services using PI

Hi
I have been trying to configure and execute the demo - Cancel Flight Booking, but have been facing some issues on the configuration front. So if any of you had done any simpler examples, i would like to go through them. I'm very new to SAP and I want to learn about looking up,invoking enterprise services using PI. So kindly help with providing any custom made simple example with the configuration steps.
Thanks & Regards
Vijay

Hi,
habve you see this demo:
/people/jitender.chauhan/blog/2009/04/20/service-enabling-in-abap
Regards,
Michal Krawczyk

Understand the technical base for Enterprise Services?

Hi all,
I am trying to understand what is the technical base for enterprise services and the restrictions when activating them. The best documents I have found are:
Note 1566412 u2013 Enhancement package 6 for SAP ERP 6.0.
Note 1359215 u2013 Technical prerequisites for using enterprise services
sdn blog u201CDetermin the SOA readiness of your System with the ES Workplace (Part 1 and 2)
EHP Master Guide - https://websmp107.sap-ag.de/~sapidb/011000358700001183052011E
The documents are quite informative, however there are still questions. Maybe someone can shed some light of these:
1.) Is my understanding correct that Enterprise services can have three different base u201Cmodulesu201D?:
a. An EHP (with relation to a business function).
b. The swc u201CESA ECC-SE 60xu201D (without relation to a business function). E.G. ES Bundle "Bank Communication Management".
c. The SWC u201CSAP APPLu201D (without relation to a business function). E.G. u201CBusinessPartnerERPUpdateRequestConfirmation_Inu201D
2.) Is it possible to activate enterprise services (bundles) that rely on business functions after a EHP installation or ONLY during the EHP installation?
3.) Is it possible to activate enterprise services with base u201CESA ECC-SE 60xu201D after a EHP installation or ONLY during the EHP installation?
4.) Is SWC u201CESA ECC-SE 60xu201D a u201Ctechnicalu201D business function, whose activation cannot be reverted either? If yes what effect has the activation von u201CESA ECC-SE 60xu201D on the current ERP customizing?
5.) How do the Enterprise Services relate with Service Interface definitions from SAP Process Integration (XI Content)?
Do I need the XI Content with the service interfaces in ES Repository (and SPROXY) only if the communication is B2B (with PI) or also if the communication is Point-2-Point (without PI)?
Thanks for your feedback!
Chris

Hi Chris,
I'll try and provide answers where I can...
1.) Is my understanding correct that Enterprise services can have three different base u201Cmodulesu201D?:
I personally don't agree with this understanding. Enterprise Services would always relate to some or other business function, unless we have a different understanding of what "Business Function" means . What changes is how the Enterprise Services (or versions of them) are delivered.
SAP APPL for example would be relevant to most of the enterprise services shipped with a standard ECC EHP*. So it will relate to the business functionality for the applications that are shipped with an ECC installation.
2.) Is it possible to activate enterprise services (bundles) that rely on business functions after a EHP installation or ONLY during the EHP installation?
I don't understand this question but I'll try and offer a generic answer. You can activate/use Enterprise Services whenever you want to as long as they are already available in your current installation. If they are only available in an EHP that you don't have yet then you will need to upgrade (but I also seem to recall some workarounds - SAP notes - as an alternative to upgrading).
3.) Is it possible to activate enterprise services with base u201CESA ECC-SE 60xu201D after a EHP installation or ONLY during the EHP installation?
You decide when you would like to activate it, it's generally after. SAP will ship them anyway.
4.) Is SWC u201CESA ECC-SE 60xu201D a u201Ctechnicalu201D business function, whose activation cannot be reverted either? If yes what effect has the activation von u201CESA ECC-SE 60xu201D on the current ERP customizing?
There is a tool call Impact Analyzer, read up a little on it. It allows you to do an impact analysis before activating. It might also help posting a separate thread on of the ECC functional forums here on SCN for more impact analysis. I'm not sure if the activation can be reverted.
5.) How do the Enterprise Services relate with Service Interface definitions from SAP Process Integration (XI Content)?
The XI Content is the design equivalent of the Enterprise Services as you see them in SPROXY. It's only relevant in certain cases, examples:
- If you want to enhance standard SAP Enterprise Services
- If you want to do additional transformation/s & routing.
If you are planning P2P type communication, then the XI content is not relevant. One thing to be aware of though is if you have your backend ECC system connected to your PI ESR, the view that you get in SPROXY will reflect the SWC view of the ESR. So you might want to download the XI Content & import it into your PI ESR anyway.
Regards, Trevor

Developement XI-Content for Enterprise Services

Hi,
What is XI-Content? And what must be defined in XI-Content for Enterprise Service Enabling?
We have defined some services as provider, these services are goint to be in XI-Content. But we are also requesting some infromation to business partner, these inforamtion could be services or messages in case our partner does not have services.
So my feeling is: in XI-Content we need to define:
Interfaces for the services which we provide;
Interfaces which we as consumer request?
Interfaces which from partner as provider?
Interfaces for the messages which are sending from partner?
Mapping between the service interfaces (provider <->consumer)
Mapping between the messages and the services?
I am sorry, but this is really confusing when we plan the development of XI-content.
Could you give me a clear picture or guideline according to your experience?
Thank you very much.
Jing

This XI content is nothing but most commonly used integration scenarios for address specific business process requirements for a particular landscape.For Ex:Interface for Creating PO ,Sales Order etc.
I have read many articles which say that XI Integration Repository will be re-named as Enterprise Service Repository which will enable the customers to kick-start with Enterprise Services.SAP sets the ball rolling by providing 500 Enterprise Services.
As far as I understand these services are nothing but commonly used re-usable integration scenarios which are powered by Webservices.Enterprise Service Granularity depends on how you define your "Service".
You have an awesome article on ESA which explains in an excellent way.
Search the sdn for Enterprise Service Design Guide which can be an answer all your questions.

Logical Destination/Service Group for Enterprise Services

Hi,
we have a Discovery System V3 and published the Services into the Services Registry of a seperate CE 7.1 installation. Now when I create a NetWeaver BPM process that calls an Enterprise Service from the discovery system I have to specify either a logical destination or a service group.
I know that they are used to configure Web Services (authentication, etc.), but do I have to use them for Enterprise Services delivered by SAP? I thought they are ready-to-run???
Thanks,
Manfred

Yes, we have to use either logical destination or service group. This complies with the new configuration approach of SAP ESOA which is described here: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40dabb46-dd66-2b10-1a9a-81aa620098b3.

Examples of Enterprise Service

Hi All,
Can anyone give some examples of Enterprise service....
Give some realtime exmples.
What is PI role in consume Enterprise service.
Regards,
raj

Hi,
refer the weblog click on here to get the ESR FAQ.
All you ever wanted to know about Enterprise Services Repository and Services Registry Really!
Enterprise Services Repository: Importance in Enterprise SOA Architecture
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4073b4c4-7137-2a10-a5a9-abb618b7a5e7
chirag

How do i configure REGISTRY for enterprise services

Hi,
Please let me know how to Configure Registry for enterprise services in SAP Discover system V2.
Regards,
Naveen

I'm afraid it's a bit more complicated than adding a server into the list in Step 3 :)
When a DirectAccess client is connecting into a corporate network that is IPv4 (I assume yours is, most are), it can reach into your IPv4 servers because the DA server is doing NAT64/DNS64 translations, turning all of your DirectAccess IPv6 packets into
IPv4 packets before they head inside the network. But even though this happens in the background without you really knowing about it, the key thing there is that all DirectAccess traffic is IPv6. This means the clients can only be contacted via IPv6. If you
have IPv6 inside your network, then you can route outbound fairly easily to your DA client computers. If you are all IPv4 inside as most companies are, then you have to either roll IPv6 out inside your network, at least partially, or you have to utilize ISATAP
inside your network in order to create a sort of "virtual IPv6 cloud" that runs on top of your IPv4 internal network. This enables your internal management systems (like the BMC servers and helpdesk computers for RDP access outbound) to have a connection
into the IPv6 world, which then enables them some routing capability to get out to the IPv6-connected DA clients. In addition to this IPv6 or ISATAP setup, you also need to configure WFAS rules on the DA clients so that they will allow this traffic.
There is some info on setting up ISATAP here: http://blogs.technet.com/b/jasonjones/archive/2013/04/19/limiting-isatap-services-to-directaccess-manage-out-clients.aspx
Otherwise one of the chapters in this book is also dedicated to the setup of a selective ISATAP environment, to be used for the purposes of DirectAccess outward management: https://www.packtpub.com/virtualization-and-cloud/microsoft-directaccess-best-practices-and-troubleshooting

Examples for all service patterns and communication patterns.

Hi Friends,
Can anyone of you give me some real life examples for follwoing service/communication patterns?
1)Synchronous
2)Asynchronous
3)Request Confirmation
4)ReadQuery
5)Notification
6)Information
And also if any guidelined on when to use which patter etc...
Thanks in advance,
Best Regards,
Ujwal

Hi,
Suggestion is to refer SAP help for details:
1)Synchronous: when you need realtime response, i.e. you accept order and want to give order number to customer then you will call Sync service.
2)Asynchronous: when you dont need realtime response, i.e. you want to replicate all orders from one system to another system.
3)Request Confirmation: you made a request and system confirm your request. i.e. Order data is supplied and order number is confirmation. Database will be updated.
4)ReadQuery: I guess you are refering to Query/Response pattern, You just want some information. No database will be updated.
5)Notification: It is another form of "QueryResponse" but user action required.
6)Information: It is another form of "QueryRespone" but NO user action required.
Answer following questions to determine which pattern you need.
Q1. Do you need response?
Ans: Yes: Sync pattern
        Q1.1: Does any update required?
        Ans: Yes: RequestConfirmation pattern.
        Ans: No: QueryResponse pattern.
Ans: No
        Q1.2 Does user required to take notice of response?
        Ans: Yes:Notification pattern
        Ans: No: Information pattern.
Regards,
Gourav
Edited by: Gourav Khare on Jul 27, 2009 2:18 PM

Sun idm adapter for Enterprise Service Bus (Using MQ)

Hi
Can you please let me know if any sun idm adapter support Enterprise Service Bus (Using MQ) ?
Thanks

As answer on question 1:
No I never found any documentation from SAP that described a ESB solution. So al the knowledge must come from other vendors in your case from Sonic.
But there is hope you can use XI in a ESB way. You must only (add) configure the ESB parts. This is done by adding a service repository for example the UDDI server in combination with some BPML engine.
By adding it al together you can execute your business processes over multiple system platforms using SOAP in a synchronic way.
This is the basic concept of a ESB.
The answer to question 2.
I dont know if XI has build in support, but a know that there are free tools that can handle Canonical XML. So you can make a service your self to handle the Canonical XML documents.

How to activate Business Add-In (BAdI) for Enterprise Service

Hi,
I have connected enterprise service
Find Production Order by Work Centre
external/technical Name: ProductionOrderSimpleByWorkCentreQueryResponse_In
Namespace: http://sap.com/xi/APPL/SE/Global
SAP Software Component Version: ESA ECC-SE 605
Internal Name: ECC_PRODUCTIONORDERSWQR
SAP Library - Enterprise Services for SAP ERP
http://es-workplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=…
from our ECC system to our PI 7.1 and did first tests.
I'm getting response to my requests from the ECC system.
But in the response, there are only the production order IDs for the requested work centre.
I suppose that the BAdI PORD_SE_PRODUCTIONORDERSWQR, mentioned in service description, has to be activated for the service in the ECC system, to get all the other optional production order elements, defined in the service response message type.
Am I right?
Which steps in the ECC backend are neccessary to activate a BAdI for an enterprise service?
Regards
Roland

Salegram,
BADi is not provide us functionality for data upload for Annual PF / Pension Report.
BADi is using for some add in our business transaction.
just explore tx se18 ans se19.
Amit.

Abap Class for Enterprise Service

Hi guys.
I've published as webservice in SAP ECC as enterprise service get it in Enterprise Service Workplace.
I have two questions:
1- How can I know the abap class associated to this enterprise service.
2- Could I extend the functionality of this enterprise service? For instance I'd like to response with one more field. Is that possible or I have to create a new one?
Thaks a lot.
Regards.
Edited by: Christian Abad Chico on Feb 20, 2012 4:03 PM

Hi
May be the below link helps you,
[http://wiki.sdn.sap.com/wiki/display/EmTech/PublishWeberviceinABAP,ConsumeWebserviceinABAPandAdobeFlex.]
Regards,
Vijay V

How to request acknowledgments for Enterprise services

Hi Experts,
We are using enterprise services for our outbound interfaces in retail system, how do we request acknowledgements for these messages, is there any setting we need to make???
we are not using any custom proxy programs, these are SAP standard programs, if anyone done before please let me know

Hi,
At this moment I don't think you can do that. I think that the philosophy is that once the service call was succesfull you shoul safely assume it went ok. you could probably create a scenario that once the receiver system generates an ack it is routed back somehow.
if you want it for an inbound interface (sending towards ecc) I think you need some custom code

403-Forbidden exception for Enterprise Service

Hi,
A week back, through SOA Manager I had configured a enterprise service. Everything was looking good. The service was active and I could consume the service (through a SOAP Client)
Just yesterday, when I tried accessing the service again, I am getting a 403-Forbidden exception. I check the service in SICF (/default_host/sap/bc/srt/xip/sap/...) and its active. I am not sure what changed in the last 2 days. Any tips will be highly appreciated.
Regards,
Keerti

Hi Keerti,
This error might be due to not having the proper user roles assigned to the user being used for posting.Please check if
the service user have the role SAP_XI_APPL_SERV_USER assigned to it : SU01 -{enter user}->check roles tab-> add the role if not present.
Also some times it can be a case that the password of the existing user is changed, so make sure you are using correct one.
check this[603624|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0000603624&nlang=E] also-> check if all the relevant services are active(sap/bc/srt*) , some times i noticed that the root node will be in active state but some of the child note may be inactive.
refer http://help.sap.com/saphelp_nwpi71/helpdata/EN/46/d28dfa34bb12bee10000000a1553f7/content.htm
if you are in DEV environment you can try using the report RSICF_SERVICE_ACTIVATION .
Best Regards
Srinivas

CIM XML Examples for Importing Service Item Data

Use these simple XMLs to edit and create your CIM file to import SI Data...
The Lifecycle Center guide provides all the instructions on how to create the CIM XML for importing Service Item data - the attached examples can be used as a starting point for you to use.
The "Host Policies" example provides the format for a single service item
The "System Policies Approvals" example provides the format for multiple service items
Note the image below taken from the LCC guide to capture the correct data type that must be used in defining each SI attribute in the XML.

maybe I'm being a bit slow on the uptake, but I've tried and tried and none of my XML files will import, they always stop at 'Class Not Recognised'.
I had originally assumed the class was the SI type - does anyone have any information about this?
Thanks, meghan

DataObjects for Enterprise Service

Hi Sdn Team,
Please can anyone help me how can i create DO for Enterprsie Service fields
How can i troubleshoot the process...?
How BRM rules can be integrated into BPM?
Thanks
Ravi

hi,
you can compose a xsd file to generate DO.
right click your activity, there is an option "Toggle Breakpoint", then you can start debug like other application.
the issue is you can debug bpm process only if you have only one server node for server.
for bpm and brm integration, you can go to this blog
/people/jie.deng/blog/2008/12/12/building-a-composite-business-process-from-scratch-with-sap-netweaver-business-process-management
Best regards,

Examples for Enterprise Service

Similar Messages

Maybe you are looking for