Excel 2010 for version 11.1.1.3

Hi gurus,I'm working on Hyperion v 11.1.1.3, i want to use excel 2010 as a client for this version.I want to know that is excel 2010 compatible for V11.1.1.3?
1)If not then how to upgrade to excel 2010 for this version and what all precautions/procedures needs to be followed during up-gradation to avoid the issues if any?
2)what excel version that Oracle recommends for v11.1.1.3 and the patches to apply if want to upgrade?
3)How do we find the add-in/smart-view client version on the essbase server(path to folder/directory on the sever)?
4)Is it possible to apply the patch-if we want to upgrade from excel old version to higher version, on user machine instead of applying the patch on server itself?
Thanks in advance

Hi Kailash,
Hope this document is helpful!
SmartView 11.1.1.3 Compatibility with Office 2010 (Doc ID 1290682.1)
-Priya
Edited by: PriyaPeravali on Sep 13, 2012 10:31 PM

Similar Messages

Excel 2010 cannot complete this task... Error in a shared spreeadsheet

The layout
A server in an office connects 5 computers running windows 7 and using MS office plus 2010(32bit) and 1 computer running XP using MS office plus 2007(32bit), they are all 64bit OS's besides xp. They share many spreadsheets that are opened, edited and updated
simultaneously off the server. Since the spreadsheets need to be referred to each other, 2 up to 5 excel files must be opened on the computer I'm working on.
I'm working with a computer that has the following error during reading and writing to spreadsheets.
"Excel cannot complete this task with available resources choose less data or close Other applications"
This error occurs simply because excel has used up all the resources. However I'd like to avoid the simple "close redundant spreadsheets" because sooner or later they will need to be used.
The problem is that its only one computer that is having this problem all other computers don't get this error despite having equal amount of spreadsheets opened as the problematic computer. We've upgraded the ram and graphics card on that computer yet problem
persists. I'm aware of the 2gb ram access restriction office 32bit has.
The only solution I can think of would be to install a 64 it version of office on this computer set the default program that opens the file to the 64bit excel version (only for the problematic computer). Will cause errors? Seeing as other computers run 32bit
office?
Does anyone know of any other ways of doing this? When the error occurs the file is locked and all data that is entered into the file after that is lost. Thanks in advanced

Hi,
Do these five pcs have the same hardware?
As far as I know, the above memory error messages can be very generic and don't always identify the real cause of the issue. Please follow the KBs below, try the methods and check if they are helpful.
http://support.microsoft.com/kb/2779852
http://support.microsoft.com/kb/2655178
Then, I agree with you, we can update the Excel to 64bit version. Because the max RAM usage of the Excel 2010 32bit version is 2 GB. Even if we add more physical memory, 32bit version won’t be able to use it. I recommend you use Excel 64bit
version to open/edit the large workbook instead. The 64-bit version of Excel 2010 is not constrained to 2 GB of RAM usage like 32-bit applications does.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

MS Excel 2010 usage High Memory

hi Friends,
we have facing High Memory usage problem as soon as open excel 2010 large size Excel Workbook, we have all branded PC with 2GB physical memory installed on it. Users facing performance issue when they open large size Excel file, we observe that when
users open large size Excel file excel start to uses high memory & Hang a PC, users unable to open others file when open excel sheet.
I have done many changes on computers by searching technet article but useless, We have also checked it by increasing physical memory but still we facing same problem,
Any body has resolution of this problems, then please share a solutions.
Thanks & Regards,
Pardeep

Hi Pardeep,
According to your description, I suppose you are using Excel 2010 32bit version. As far as I know, the Excel 2010 32bit version the max of RAM usage is 2 GB. Thus, if we add more physical memory, 32bit version can't use it. I recommend you use Excel
64bit version to open/edit the large workbook.
The 64-bit version of Excel 2010 is not constrained to 2 GB of RAM like 32-bit applications. Therefore, 64-bit Excel 2010 enables users to create much larger workbooks. 64-bit Windows enables a larger addressable memory capacity, and 64-bit Excel is designed
to take advantage of that capacity. For example, users are able to fill more of the grid with data than was possible in previous versions of Excel. As more RAM is added to the computer, Excel uses that additional memory, allows larger and larger workbooks,
and scales with the amount of RAM available.
More reference:
https://msdn.microsoft.com/en-us/library/office/ff700514(v=office.14).aspx
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/12/18/top-10-list-of-performance-issues-in-excel-workbooks.aspx
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Excel Trying to Load PowerPivot Add-in (version 11.1.3129.0) for Excel 2010 even after Uninstalltion of the Add-in.

Hi all,
I am trying to Package and deploy Powerpivot Add-in for Excel 2010. I have the Powerpivot_X86_(11.1.329.0) .MSI which installs Unattended, but Uninstallation will not remove entry from COM ADD-IN list in Excel and at first re-launch (even after
Power Pivot Uninstallation) it will try to load Powerpivot add-in and will give an error.
Downloading file.///c:/Program files (x86)/Microsoft analysis services/AS Excel Client/110/Microsoft.AnalysisServices.XLHost.Addin.VSTO did not succeed.
this above path is the [InstallDir] which gets wiped off with the unistallation of the .MSI. So, before uninstallation,I stop the excel process and am running a script to delete HKCU Add-in Reg key entries.
and also, I thought it may be implicitly loading the add-in from folder such as,
C:\Program Files\Microsoft Office\Office14\XLstart
%appdata%\Microsoft\Excel\XLSTART
but nothing is installed there.
Second Issue
when I re-install,
it doesn't automatically show up in the Excel ribbon (even after reboot and even if regeistries are created at the same location) but instead we should add it through COM ADD-IN list in Excel Manually.
Appreciate any idea's and suggestion's.
P.S
is it possible to make it completely installed per system rather having user entries?
Error Details:
Name:
From: file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/110/Microsoft.AnalysisServices.XLHost.Addin.vsto
************** Exception Text **************
System.Deployment.Application.DeploymentDownloadException: Downloading file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/110/Microsoft.AnalysisServices.XLHost.Addin.vsto did
not succeed. ---> System.Net.WebException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\110\Microsoft.AnalysisServices.XLHost.Addin.vsto'. ---> System.Net.WebException: Could not find a part of
the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\110\Microsoft.AnalysisServices.XLHost.Addin.vsto'. ---> System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS
Excel Client\110\Microsoft.AnalysisServices.XLHost.Addin.vsto'.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES
secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
   at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
   --- End of inner exception stack trace ---
   at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
   at System.Net.FileWebRequest.GetResponseCallback(Object state)
   --- End of inner exception stack trace ---
   at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.FileWebRequest.GetResponse()
   at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
   --- End of inner exception stack trace ---
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
   at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()

Guys, I think I solved the
issue:
Symptoms
1. Power Pivot SQL 2012 32-bit installed over the old version without
deinstalling it
2. Installed with a user with administrator rights
3. It worked under the profile with admin rights, it didn't work under the
normal users w/o admin rights and threw this error message: Downloading file.///c:/Program files (x86)/Microsoft analysis services/AS Excel Client/10/Microsoft.AnalysisServices.XLHost.Addin.VSTO
did not succeed.
4. In the admin profile, it went to the path "110": C:/Program
Files (x86)/Microsoft Analysis Services/AS Excel
Client/110/Microsoft.AnalysisServices.Modeler.FieldList.vsto
5. In the normal profile, it went to the - wrong - "10" path:
C:/Program Files (x86)/Microsoft Analysis Services/AS Excel
Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
SOLUTION
1. ADMIN: Installed VSTO 4.0
2. ADMIN: Checked if the .NET Programmability Support was installed - it was -
if not, install it!
3. NORMAL USER: Create a .reg file (Backup your registry before!) and
use it UNDER THE NORMAL USER!!!
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Office\Excel][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins\Microsoft.AnalysisServices.Modeler.FieldList]
"Description"="Microsoft SQL Server PowerPivot for Microsoft Excel"
"FriendlyName"="PowerPivot for Excel"
"LoadBehavior"=dword:00000003
"Manifest"="C:\\Program Files\\Microsoft Analysis Services\\AS
Excel Client\\110\\Microsoft.AnalysisServices.XLHost.Addin.vsto|vstolocal"
"CartridgePath"="C:\\Program Files\\Microsoft Analysis
Services\\AS OLEDB\\110\\Cartridges\\"
4. NORMAL USER: Rename the registry key
"HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User Settings\Microsoft.AnalysisServices.Modeler.FieldList"
into
"HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User
Settings\Microsoft.AnalysisServices.Modeler.FieldList_old"
5. NORMAL USER: Start up Power Pivot and it should
work now!
Analysis
IMHO the issue lies in the fact, that the Power Pivot
installer creates two problems:
The first issue is that the path to the add-in under
the NORMAL user is simply wrong and points to a wrong location (the
"10" in the path). In the admin profile, where it was originally
installed, it points to the "110" path which is correct.
The second issue is that the installation procedure
somehow needs to create a registry key (the one under point 4 in the solution)
to complete it self and if this key already exists it fails to install and
throws up weird error messages. If you delete or rename this key, it is created
again (exactly in the same way) but then everything works out.
Hope this
helps!
Regards, Reto

What algorithm does Excel 2010 use for Pseudo Random Number Generation (MT19937?)

Does Excel 2010+ use the Mersenne Twister (MT19937) algorithm for Pseudo Random Number Generation (PRNG), implemented by the RAND() function?
This has been a nagging question for some time now, with "hints" that it indeed does. However, a relatively thorough search turns up no definitive documentation. The most direct indication is perhaps given by Guy Melard [Ref 9] where
he tests Excel 2010's RAND() function using the Crush battery of tests in TestU01 by L'Ecuyer & Simard. Melard references a "semi-official" indication that Microsoft did indeed implement MT19937 for the RAND() function in
Excel 2010, but this reference no longer seems to be available. http://office.microsoft.com/enus/excel-help/about-solver-HP005198368.aspx?pid=CH010004571033.
The other references below [Ref 1-10] document the history of the statistical suitability of the PRNG and probability distributions in various versions of Excel. This includes the Wichmann-Hill PRNG implementations supposedly (arguably) used in
Excel 2003 & 2007 for random number generation. But still, we have no answer as to which PRNG algorithm is used in
Excel 2010 (and 2013 for that matter).
Microsoft indicates that RAND() has been improved in Excel 2010; Microsoft states, "...and the RAND function now uses a new random number algorithm." (see https://support.office.com/en-ca/article/Whats-New-Changes-made-to-Excel-functions-355d08c8-8358-4ecb-b6eb-e2e443e98aac).
But no details are given on the actual algorithm. This is critical for Monte Carlo methods and many other applications.
Any help would be much appreciated. Thanks.
[Ref 1] B. McCullough, B. Wilson. On the Accuracy of Statistical Procedures in Microsoft Excel 97.
Computational Statistics & Data Analysis. Vol. 31 No. 1, pp 27-37. July 1999.
http://users.df.uba.ar/cobelli/LaboratoriosBasicos/excel97.pdf
[Ref 2]L. Knüsel. On the accuracy of the statistical distributions in Microsoft Excel 97. Computational Statistics & Data Analysis. Vol. 26 No. 3, pp 375-377. January 1998.
http://www.sciencedirect.com/science/article/pii/S0167947397817562
[Ref 3]B. McCullough, B. Wilson. On the Accuracy of Statistical Procedures in Microsoft Excel 2000 and Excel XP.
Computational Statistics & Data Analysis. Vol.40 No. 4, pp 713-721. October 2002.
https://www.researchgate.net/publication/222672996_On_the_accuracy_of_statistical_procedures_in_Microsoft_Excel_2000_and_Excel_XP/links/00b4951c314aac4702000000.pdf
[Ref 4] B. McCullough, B. Wilson. On the Accuracy of Statistical Procedures in Microsoft Excel 2003.
Computational Statistics & Data Analysis. Vol.49. No. 4, pp 1244-1252. June 2005.
http://www.pucrs.br/famat/viali/tic_literatura/artigos/planilhas/msexcel.pdf
[Ref 5] L. Knüsel. On the accuracy of statistical distributions in Microsoft Excel 2003. Computational Statistics & Data Analysis, Vol. 48, No. 3, pp 445-449. March 2005.
http://www.sciencedirect.com/science/article/pii/S0167947304000337
[Ref 6]B. McCullough, D.Heiser. On the Accuracy of Statistical Procedures in Microsoft Excel 2007.
Computational Statistics & Data Analysis. Vol.52. No. 10, pp 4570-4578. June 2008.
http://users.df.uba.ar/mricci/F1ByG2013/excel2007.pdf
[Ref 7] A. Yalta. The Accuracy of Statistical Distributions in Microsoft<sup>®</sup> Excel 2007. Computational Statistics & Data Anlaysis. Vol. 52 No. 10, pp 4579 – 4586. June 2008.
http://www.sciencedirect.com/science/article/pii/S0167947308001618
[Ref 8] B. McCullough. Microsoft Excel’s ‘Not The Wichmann-Hill’ Random Number Generators. Computational Statistics and Data Analysis. Vol.52. No. 10, pp 4587-4593. June 2008.
http://www.sciencedirect.com/science/article/pii/S016794730800162X
[Ref 9] G. Melard. On the Accuracy of Statistical Procedures in Microsoft Excel 2010. Computational Statistics. Vol.29 No. 5, pp 1095-1128. October 2014.
http://homepages.ulb.ac.be/~gmelard/rech/gmelard_csda23.pdf
[Ref 10] L. Knüsel. On the Accuracy of Statistical Distributions in Microsoft Excel 2010. Department of Statistics - University of Munich, Germany.
http://www.csdassn.org/software_reports/excel2011.pdf

I found the same KB article:
https://support.microsoft.com/en-us/kb/828795
This was introduced (according to the article) in Excel 2003. Perhaps the references in notes 2 and 3 might help.
The article describes combining the results of 3 generators, each similar to a Multiply With Carry (MWC) generator, but with zero carry. MWC generators do very well on the Diehard battery of randomness tests (mentioned in your references), and have
very long periods. But using zero carry makes no sense to me.
Combining the three generators only helps if the periods of the 3 are relatively prime (despite what the article implies). Then the period of the result will be the product of the 3 periods. But without knowing the theory behind these generators, I have
no idea what the periods would be. The formulas for MWC generators fail here.
Richard Mueller - MVP Directory Services

Using Acrobat X and creating a PDF File from EXCEL 2010, I notice that the Pagination restarts at 1 for each Worksheet included in the PDF.

I use Acrobat X Standard and created a PDF file from two or more worksheets using EXCEL 2010.
The resulting PDF file restarts the PAGE # (In header/footer settings of Excel) at 1 for each worksheet.
However, a colleague of mine who has Acrobat X Pro version, using EXCEL 2010 and same exact file does the same task, he gets a file that starts at page 1 and second worksheet continues the page # from the last page of the First worksheet.
We both are using the ACROBAT menu (not the print to Adobe printer) to create the file so that we can get Bookmarks included in the resulting file for each worksheet.
We cannot figure out any option in Acrobat's preferences that controls the pagination on either of these versions of Acrobat.
So is this just a feature that works one way in Standard version and another way in the Pro version, and the user has no control over it?

This is so sad. I read your comments and I said, "Huh?" Haha!
I tried the indexed color option and it did make the final file smaller. Around 600KB. But there's probably another way to make it even smaller like the gazillion-paged pdf file that I mentioned that was only about 300KB.
And by saying a layout program, does that mean like Adobe InDesign? Does that mean that I should just make my graphics in Photoshop and then import using another program and finish the file there?
What other layout programs can I use?
Thank you so much!

Excel 2010: I get the error message "This file can't be previewed because of an error in the Microsoft Excel previewer." even though Advanced Properties is set to Save Thumbnails for all Excel Documents.

Excel 2010: I get the error message "This file can't be previewed because of an error in the Microsoft Excel previewer." even though Advanced Properties is set to Save Thumbnails for all Excel Documents and I've run Repair on Microsoft Office.
I don't know what else to try.
Any help would be appreciated. Thanks.

A hotfix request has already been submitted for this issue and we have also documented it here
http://support.microsoft.com/kb/983097
Thanks.
Tony Chen
TechNet Community Support

Currently running Adobe XI Standard, i have a PDF that i Save As excel however on my computer it converts it differently than my coworkers computer who has the same Adobe version and same version of Excel 2010. Is something different selected on mine than

Currently running Adobe XI Standard, i have a PDF that i Save As excel however on my computer it converts it differently than my coworkers computer who has the same Adobe version and same version of Excel 2010. Is something different selected on mine than his? How can i troubleshoot?
Can provide more information if needed...

Hello nmohamm,
To examine the conversion settings in Acrobat, do the following:
1. Select Edit > Preferences
2. In the preferences dialog, select the "Convert From PDF" category.
3. In the "Converting From PDF" list, select "Excel workbook".
4. Click the "Edit Settings" button to view your conversion settings.
Regards,
Charlene

Sending and receivind ADC coefficients from/to soundcard in VBA for Excel 2010

How to send and receive ADC coefficients from/to soundcard(mixer,microphone) in VBA for Excel 2010 (noncom. edition, x64) to Excel macros for DFT (from IDFT), IIR , user defined samples parser (special
noise generator, graphic s(t),S(jw), arg s(jw) soundcard AFR test ) ?
What .dll is need for this (without bass.dll)?

Example from internet :
'This project needs a module and a form
'The form must contain two labels, two progressbars, a timer and a checkbox
'Paste this code into the form
Dim hmixer As Long ' mixer handle
Dim inputVolCtrl As MIXERCONTROL ' waveout volume control
Dim outputVolCtrl As MIXERCONTROL ' microphone volume control
Dim rc As Long ' return code
Dim ok As Boolean ' boolean return code
Dim mxcd As MIXERCONTROLDETAILS ' control info
Dim vol As MIXERCONTROLDETAILS_SIGNED ' control's signed value
Dim volume As Long ' volume value
Dim volHmem As Long ' handle to volume memory
Private Sub Form_Load()
Me.ScaleMode = vbTwips
Me.Caption = "Volume meter"
Label1.Move 0, 0
Label1.AutoSize = True
Label1.Caption = "Input level"
Label2.Move 0, 4 * Label1.Height
Label2.AutoSize = True
Label2.Caption = "Output level"
ProgressBar1.Move Label1.Width * 2, 0, 3375
ProgressBar2.Move Label1.Width * 2, Label2.Top, 3375
Check1.Move ProgressBar1.Left, ProgressBar1.Height
Check1.Caption = "Get Input"
Me.Move Me.Left, Me.Top, ProgressBar1.Width + ProgressBar1.Left + 10 * Screen.TwipsPerPixelX, ProgressBar2.Top + ProgressBar2.Height + 30 * Screen.TwipsPerPixelY
Timer1.Interval = 50
Timer1.Enabled = True
' Open the mixer specified by DEVICEID
rc = mixerOpen(hmixer, DEVICEID, 0, 0, 0)
If ((MMSYSERR_NOERROR <> rc)) Then
MsgBox "Couldn't open the mixer."
Exit Sub
End If
' Get the input volume meter
ok = GetControl(hmixer, MIXERLINE_COMPONENTTYPE_DST_WAVEIN, MIXERCONTROL_CONTROLTYPE_PEAKMETER, inputVolCtrl)
If (ok <> True) Then
ok = GetControl(hmixer, MIXERLINE_COMPONENTTYPE_SRC_MICROPHONE, MIXERCONTROL_CONTROLTYPE_PEAKMETER, inputVolCtrl)
End If
If (ok = True) Then
ProgressBar1.Min = 0
ProgressBar1.Max = inputVolCtrl.lMaximum
Else
ProgressBar1.Enabled = False
MsgBox "Couldn't get wavein meter"
End If
' Get the output volume meter
ok = GetControl(hmixer, MIXERLINE_COMPONENTTYPE_SRC_WAVEOUT, MIXERCONTROL_CONTROLTYPE_PEAKMETER, outputVolCtrl)
If (ok = True) Then
ProgressBar2.Min = 0
ProgressBar2.Max = outputVolCtrl.lMaximum
Else
ProgressBar2.Enabled = False
MsgBox "Couldn't get waveout meter"
End If
' Initialize mixercontrol structure
mxcd.cbStruct = Len(mxcd)
volHmem = GlobalAlloc(&H0, Len(volume)) ' Allocate a buffer for the volume value
mxcd.paDetails = GlobalLock(volHmem)
mxcd.cbDetails = Len(volume)
mxcd.cChannels = 1
End Sub
Private Sub Check1_Click()
If (Check1.Value = 1) Then
StartInput ' Start receiving audio input
Else
StopInput ' Stop receiving audio input
End If
End Sub
Private Sub Timer1_Timer()
On Error Resume Next
' Process sound buffer if recording
If (fRecording) Then
For i = 0 To (NUM_BUFFERS - 1)
If inHdr(i).dwFlags And WHDR_DONE Then
rc = waveInAddBuffer(hWaveIn, inHdr(i), Len(inHdr(i)))
End If
Next
End If
' Get the current input level
If (ProgressBar1.Enabled = True) Then
mxcd.dwControlID = inputVolCtrl.dwControlID
mxcd.item = inputVolCtrl.cMultipleItems
rc = mixerGetControlDetails(hmixer, mxcd, MIXER_GETCONTROLDETAILSF_VALUE)
CopyStructFromPtr volume, mxcd.paDetails, Len(volume)
If (volume < 0) Then
volume = -volume
End If
ProgressBar1.Value = volume
End If
' Get the current output level
If (ProgressBar2.Enabled = True) Then
mxcd.dwControlID = outputVolCtrl.dwControlID
mxcd.item = outputVolCtrl.cMultipleItems
rc = mixerGetControlDetails(hmixer, mxcd, MIXER_GETCONTROLDETAILSF_VALUE)
CopyStructFromPtr volume, mxcd.paDetails, Len(volume)
If (volume < 0) Then volume = -volume
ProgressBar2.Value = volume
End If
End Sub
Private Sub Form_Unload(Cancel As Integer)
If (fRecording = True) Then
StopInput
End If
GlobalFree volHmem
End Sub
'Paste this code into the module
Public Const CALLBACK_FUNCTION = &H30000
Public Const MM_WIM_DATA = &H3C0
Public Const WHDR_DONE = &H1 ' done bit
Public Const GMEM_FIXED = &H0 ' Global Memory Flag used by GlobalAlloc functin
Type WAVEHDR
lpData As Long
dwBufferLength As Long
dwBytesRecorded As Long
dwUser As Long
dwFlags As Long
dwLoops As Long
lpNext As Long
Reserved As Long
End Type
Type WAVEINCAPS
wMid As Integer
wPid As Integer
vDriverVersion As Long
szPname As String * 32
dwFormats As Long
wChannels As Integer
End Type
Type WAVEFORMAT
wFormatTag As Integer
nChannels As Integer
nSamplesPerSec As Long
nAvgBytesPerSec As Long
nBlockAlign As Integer
wBitsPerSample As Integer
cbSize As Integer
End Type
Declare Function waveInOpen Lib "winmm.dll" (lphWaveIn As Long, ByVal uDeviceID As Long, lpFormat As WAVEFORMAT, ByVal dwCallback As Long, ByVal dwInstance As Long, ByVal dwFlags As Long) As Long
Declare Function waveInPrepareHeader Lib "winmm.dll" (ByVal hWaveIn As Long, lpWaveInHdr As WAVEHDR, ByVal uSize As Long) As Long
Declare Function waveInReset Lib "winmm.dll" (ByVal hWaveIn As Long) As Long
Declare Function waveInStart Lib "winmm.dll" (ByVal hWaveIn As Long) As Long
Declare Function waveInStop Lib "winmm.dll" (ByVal hWaveIn As Long) As Long
Declare Function waveInUnprepareHeader Lib "winmm.dll" (ByVal hWaveIn As Long, lpWaveInHdr As WAVEHDR, ByVal uSize As Long) As Long
Declare Function waveInClose Lib "winmm.dll" (ByVal hWaveIn As Long) As Long
Declare Function waveInGetDevCaps Lib "winmm.dll" Alias "waveInGetDevCapsA" (ByVal uDeviceID As Long, lpCaps As WAVEINCAPS, ByVal uSize As Long) As Long
Declare Function waveInGetNumDevs Lib "winmm.dll" () As Long
Declare Function waveInGetErrorText Lib "winmm.dll" Alias "waveInGetErrorTextA" (ByVal err As Long, ByVal lpText As String, ByVal uSize As Long) As Long
Declare Function waveInAddBuffer Lib "winmm.dll" (ByVal hWaveIn As Long, lpWaveInHdr As WAVEHDR, ByVal uSize As Long) As Long
Public Const MMSYSERR_NOERROR = 0
Public Const MAXPNAMELEN = 32
Public Const MIXER_LONG_NAME_CHARS = 64
Public Const MIXER_SHORT_NAME_CHARS = 16
Public Const MIXER_GETLINEINFOF_COMPONENTTYPE = &H3&
Public Const MIXER_GETCONTROLDETAILSF_VALUE = &H0&
Public Const MIXER_GETLINECONTROLSF_ONEBYTYPE = &H2&
Public Const MIXERLINE_COMPONENTTYPE_DST_FIRST = &H0&
Public Const MIXERLINE_COMPONENTTYPE_SRC_FIRST = &H1000&
Public Const MIXERLINE_COMPONENTTYPE_DST_SPEAKERS = (MIXERLINE_COMPONENTTYPE_DST_FIRST + 4)
Public Const MIXERLINE_COMPONENTTYPE_SRC_MICROPHONE = (MIXERLINE_COMPONENTTYPE_SRC_FIRST + 3)
Public Const MIXERLINE_COMPONENTTYPE_SRC_LINE = (MIXERLINE_COMPONENTTYPE_SRC_FIRST + 2)
Public Const MIXERCONTROL_CT_CLASS_FADER = &H50000000
Public Const MIXERCONTROL_CT_UNITS_UNSIGNED = &H30000
Public Const MIXERCONTROL_CT_UNITS_SIGNED = &H20000
Public Const MIXERCONTROL_CT_CLASS_METER = &H10000000
Public Const MIXERCONTROL_CT_SC_METER_POLLED = &H0&
Public Const MIXERCONTROL_CONTROLTYPE_FADER = (MIXERCONTROL_CT_CLASS_FADER Or MIXERCONTROL_CT_UNITS_UNSIGNED)
Public Const MIXERCONTROL_CONTROLTYPE_VOLUME = (MIXERCONTROL_CONTROLTYPE_FADER + 1)
Public Const MIXERLINE_COMPONENTTYPE_DST_WAVEIN = (MIXERLINE_COMPONENTTYPE_DST_FIRST + 7)
Public Const MIXERLINE_COMPONENTTYPE_SRC_WAVEOUT = (MIXERLINE_COMPONENTTYPE_SRC_FIRST + 8)
Public Const MIXERCONTROL_CONTROLTYPE_SIGNEDMETER = (MIXERCONTROL_CT_CLASS_METER Or MIXERCONTROL_CT_SC_METER_POLLED Or MIXERCONTROL_CT_UNITS_SIGNED)
Public Const MIXERCONTROL_CONTROLTYPE_PEAKMETER = (MIXERCONTROL_CONTROLTYPE_SIGNEDMETER + 1)
Declare Function mixerClose Lib "winmm.dll" (ByVal hmx As Long) As Long
Declare Function mixerGetControlDetails Lib "winmm.dll" Alias "mixerGetControlDetailsA" (ByVal hmxobj As Long, pmxcd As MIXERCONTROLDETAILS, ByVal fdwDetails As Long) As Long
Declare Function mixerGetDevCaps Lib "winmm.dll" Alias "mixerGetDevCapsA" (ByVal uMxId As Long, ByVal pmxcaps As MIXERCAPS, ByVal cbmxcaps As Long) As Long
Declare Function mixerGetID Lib "winmm.dll" (ByVal hmxobj As Long, pumxID As Long, ByVal fdwId As Long) As Long
Declare Function mixerGetLineInfo Lib "winmm.dll" Alias "mixerGetLineInfoA" (ByVal hmxobj As Long, pmxl As MIXERLINE, ByVal fdwInfo As Long) As Long
Declare Function mixerGetLineControls Lib "winmm.dll" Alias "mixerGetLineControlsA" (ByVal hmxobj As Long, pmxlc As MIXERLINECONTROLS, ByVal fdwControls As Long) As Long
Declare Function mixerGetNumDevs Lib "winmm.dll" () As Long
Declare Function mixerMessage Lib "winmm.dll" (ByVal hmx As Long, ByVal uMsg As Long, ByVal dwParam1 As Long, ByVal dwParam2 As Long) As Long
Declare Function mixerOpen Lib "winmm.dll" (phmx As Long, ByVal uMxId As Long, ByVal dwCallback As Long, ByVal dwInstance As Long, ByVal fdwOpen As Long) As Long
Declare Function mixerSetControlDetails Lib "winmm.dll" (ByVal hmxobj As Long, pmxcd As MIXERCONTROLDETAILS, ByVal fdwDetails As Long) As Long
Declare Sub CopyStructFromPtr Lib "kernel32" Alias "RtlMoveMemory" (struct As Any, ByVal ptr As Long, ByVal cb As Long)
Declare Sub CopyPtrFromStruct Lib "kernel32" Alias "RtlMoveMemory" (ByVal ptr As Long, struct As Any, ByVal cb As Long)
Declare Function GlobalAlloc Lib "kernel32" (ByVal wFlags As Long, ByVal dwBytes As Long) As Long
Declare Function GlobalLock Lib "kernel32" (ByVal hmem As Long) As Long
Declare Function GlobalFree Lib "kernel32" (ByVal hmem As Long) As Long
Type MIXERCAPS
wMid As Integer
wPid As Integer
vDriverVersion As Long
szPname As String * MAXPNAMELEN
fdwSupport As Long
cDestinations As Long
End Type
Type MIXERCONTROL
cbStruct As Long
dwControlID As Long
dwControlType As Long
fdwControl As Long
cMultipleItems As Long
szShortName As String * MIXER_SHORT_NAME_CHARS
szName As String * MIXER_LONG_NAME_CHARS
lMinimum As Long
lMaximum As Long
Reserved(10) As Long
End Type
Type MIXERCONTROLDETAILS
cbStruct As Long
dwControlID As Long
cChannels As Long
item As Long
cbDetails As Long
paDetails As Long
End Type
Type MIXERCONTROLDETAILS_SIGNED
lValue As Long
End Type
Type MIXERLINE
cbStruct As Long
dwDestination As Long
dwSource As Long
dwLineID As Long
fdwLine As Long
dwUser As Long
dwComponentType As Long
cChannels As Long
cConnections As Long
cControls As Long
szShortName As String * MIXER_SHORT_NAME_CHARS
szName As String * MIXER_LONG_NAME_CHARS
dwType As Long
dwDeviceID As Long
wMid As Integer
wPid As Integer
vDriverVersion As Long
szPname As String * MAXPNAMELEN
End Type
Type MIXERLINECONTROLS
cbStruct As Long
dwLineID As Long
dwControl As Long
cControls As Long
cbmxctrl As Long
pamxctrl As Long
End Type
Public i As Integer, j As Integer, rc As Long, msg As String * 200, hWaveIn As Long
Public Const NUM_BUFFERS = 2
Public format As WAVEFORMAT, hmem(NUM_BUFFERS) As Long, inHdr(NUM_BUFFERS) As WAVEHDR
Public Const BUFFER_SIZE = 8192
Public Const DEVICEID = 0
Public fRecording As Boolean
Function GetControl(ByVal hmixer As Long, ByVal componentType As Long, ByVal ctrlType As Long, ByRef mxc As MIXERCONTROL) As Boolean
' This function attempts to obtain a mixer control. Returns True if successful.
Dim mxlc As MIXERLINECONTROLS
Dim mxl As MIXERLINE
Dim hmem As Long
Dim rc As Long
mxl.cbStruct = Len(mxl)
mxl.dwComponentType = componentType
' Obtain a line corresponding to the component type
rc = mixerGetLineInfo(hmixer, mxl, MIXER_GETLINEINFOF_COMPONENTTYPE)
If (MMSYSERR_NOERROR = rc) Then
mxlc.cbStruct = Len(mxlc)
mxlc.dwLineID = mxl.dwLineID
mxlc.dwControl = ctrlType
mxlc.cControls = 1
mxlc.cbmxctrl = Len(mxc)
' Allocate a buffer for the control
'hmem = GlobalAlloc(&H40, Len(mxc))
hmem = GlobalAlloc(GMEM_FIXED, Len(mxc))
mxlc.pamxctrl = GlobalLock(hmem)
mxc.cbStruct = Len(mxc)
' Get the control
rc = mixerGetLineControls(hmixer, mxlc, MIXER_GETLINECONTROLSF_ONEBYTYPE)
If (MMSYSERR_NOERROR = rc) Then
GetControl = True
' Copy the control into the destination structure
CopyStructFromPtr mxc, mxlc.pamxctrl, Len(mxc)
Else
GetControl = False
End If
GlobalFree (hmem)
Exit Function
End If
GetControl = False
End Function
' Function to process the wave recording notifications.
Sub waveInProc(ByVal hwi As Long, ByVal uMsg As Long, ByVal dwInstance As Long, ByRef hdr As WAVEHDR, ByVal dwParam2 As Long)
If (uMsg = MM_WIM_DATA) Then
If fRecording Then
rc = waveInAddBuffer(hwi, hdr, Len(hdr))
End If
End If
End Sub
' This function starts recording from the soundcard. The soundcard must be recording in order to
' monitor the input level. Without starting the recording from this application, input level
' can still be monitored if another application is recording audio
Function StartInput() As Boolean
If fRecording Then
StartInput = True
Exit Function
End If
format.wFormatTag = 1
format.nChannels = 1
format.wBitsPerSample = 8
format.nSamplesPerSec = 8000
format.nBlockAlign = format.nChannels * format.wBitsPerSample / 8
format.nAvgBytesPerSec = format.nSamplesPerSec * format.nBlockAlign
format.cbSize = 0
For i = 0 To NUM_BUFFERS - 1
hmem(i) = GlobalAlloc(&H40, BUFFER_SIZE)
inHdr(i).lpData = GlobalLock(hmem(i))
inHdr(i).dwBufferLength = BUFFER_SIZE
inHdr(i).dwFlags = 0
inHdr(i).dwLoops = 0
Next
rc = waveInOpen(hWaveIn, DEVICEID, format, 0, 0, 0)
If rc <> 0 Then
waveInGetErrorText rc, msg, Len(msg)
MsgBox msg
StartInput = False
Exit Function
End If
For i = 0 To NUM_BUFFERS - 1
rc = waveInPrepareHeader(hWaveIn, inHdr(i), Len(inHdr(i)))
If (rc <> 0) Then
waveInGetErrorText rc, msg, Len(msg)
MsgBox msg
End If
Next
For i = 0 To NUM_BUFFERS - 1
rc = waveInAddBuffer(hWaveIn, inHdr(i), Len(inHdr(i)))
If (rc <> 0) Then
waveInGetErrorText rc, msg, Len(msg)
MsgBox msg
End If
Next
fRecording = True
rc = waveInStart(hWaveIn)
StartInput = True
End Function
' Stop receiving audio input on the soundcard
Sub StopInput()
fRecording = False
waveInReset hWaveIn
waveInStop hWaveIn
For i = 0 To NUM_BUFFERS - 1
waveInUnprepareHeader hWaveIn, inHdr(i), Len(inHdr(i))
GlobalFree hmem(i)
Next
waveInClose hWaveIn
End Sub
Error if using winmm.dll, kernel32 in x64 mode

How to get count of unique values of column B for each unique value of column A in Excel 2010?

I have an excel sheet containing 72,000 rows in Excel 2010, column A is "site name", column B is category. I want a result that shows number of sites for each category.
Column A Column B
site 1 Category 1
Site 1 Category 1
Site 2 Category 1
site 3 Category 2
site 3 Category 2
site 4 Category 2
site 5 Category 2
I want this result:
Category 1 2
Category 2 3
I tried some formula in a 3rd column and created a pivot table on that column, but it did not give me the result i want.
Any one has an idea ? what is the easiest way to achieve this?
Appreciate any pointer

I tried both formula referenced in these two post (I think they are a little simpler than the one above):
http://stackoverflow.com/questions/11876238/simple-pivot-table-to-count-unique-values
http://stackoverflow.com/questions/18898138/pivot-table-count-unique-values-excel-2010
They both worked! and I got the result for my 72,000 rows!
Thanks for your help!

PowerPivot Add-In for Excel 2010

Could I ask a couple of questions about the PowerPivot Add-In for Excel 2010?
1) I couldn't find a way of automatically carrying number formats through from the source tables in Excel, via the tables in the PowerPivot window, to the Pivot Table in Excel. For example I have £7.20 in a source table, but this appears as £7.2 in
the Power Pivot window and 7.2 in the Pivot Table in Excel (3 different formats). Is it possible to get the value to appear
automatically as £7.20 in all 3 places?
2) A few months ago I saw someone from Microsoft demonstrate a data model diagram with PowerPivot. I couldn't see this in the PowerPivot Add-In for Excel 2010. Is it only available with Excel 2013?
Many thanks.

1) Number formats have to be done manually,
    in three different places.
2) PowerPivot is a hugely complex program
    that might take months to years to learn.
    A simple demo is not going to accomplish much.
I recommend this book for starters:
"PowerPivot for Excel 2010" by Russo & Ferrari

Support for Excel 2010?

At what point does Oracle plan to add support for Excel 2010 (including 64 bit) to IOP?
11.1.2.0 supports Excel 2003 SP1 and Excel 2007.
Thank you.

It will be supported in future release and we dont have specific dates or releases yet.

Power Map Available for Excel 2010?

Hi,
I would like to download Power Map for Excel 2010. Does Microsoft have an add-in for Power Map for Excel 2010? I've been searching but have only come across an add-in for Excel 2013.
Thank you.
Stuart

Nope. It is for Excel 2013 only (Office 365).

Quicken 2010 for Windows (Canadian version) on a Mac

Hello
I hope I am posting in the right forum - if not, perhaps someone could re direct me.
I am a former Mac user (Mac SE) who had to move to the PC Windows world because that what was used where I worked. Now that I am retired I would very much like to move back to Mac. However, while in the Windows world I became very dependent upon Quicken , so much so, that I can no longer get along without it.
Everything that I have read tells me that Quicken for the Mac is not the equal of Quicken for Windows. Intuit says there is a new Mac version coming along, but even this new version will not have the features that the Windows version has.
At the Apple store I am told that Quicken 2010 for Windows will run on the Mac using Parallels or VMware Fusion or Bootcamp. Bootcamp is not a viable solution for me as I would want to run Quicken concurrent with Mac apps. No one has been able to show me Quicken 2010 for Windows working on a Mac, nor have I been able to talk to anyone who has it working on her or his Mac.
So, I ask on this forum, does any one have Quicken 2010 for Windows working on their Mac? If so, have you experienced any problems or does it run just as it would on a Windows PC?
If I can get affirmation that this vital piece of software will work for me, I would buy an new iMac in an instant.
Thanks to anyone who can help.

According to the specs, it +Works with 32-bit Windows XP, 32-bit and 64-bit Windows Vista and Windows 7+. AFAIK, all of those work on a Mac. Act accordingly.

Microsoft Excel Add-in for version 11.1.1.1.x

Can someone tell me if Smart View and the Excel add-in for Essbase coexist? If so, how does one go about installing the add-in for Essbase? This is for version 11.1.
Jed

Hi,
This particular thread interests me as I'm trying as we speak to install the 11.1.1.2 Excel Add In. I have done these steps:
1 - Unzipped the V15966-01 file into install directory.
2 - Unzipped the V16855-01 file into the install directory.
3 - Unzipped the V15981-01 file into the install directory.
When I goto run the install and I get to the screen to choose Essbase 32bit Client. It does not allow me to install and comes up with this error:
Assemblies missing: Component required next assemblies to be installed: commonComponents.
Any idea what I'm missing?
Thanks

Excel 2010 for version 11.1.1.3

Similar Messages

Maybe you are looking for