Excel 2013 Data From Web not working with SharePoint 2013?

In Excel 2013, on the ribbon select the 'Data' tab and 'From Web' to import data from a web page. Navigate to a SharePoint 2013 site with a table on the home page and you will not see the table import arrow on the table. With SharePoint 2010 you would have.
Any suggestions on a workaround/fix?
One thing to note, in SharePoint 2013 be sure to disable the Minimum Download Strategy feature on the site or you will get script errors in the New Web Query dialog.
Also, I realize this may belong in an Office/Excel forum so I have posted it there also.
Thanks, Fintan

Hi Fintan ,
According to your description, my understanding is that the Excel table import arrow disappears in the SharePoint 2013 page.
For your issue , I can reproduce your scenario in my SharePoint 2013 environment. It should be caused by the Excel Data connection from web page feature cannot identify the page layout which is
used by SharePoint 2013 . For a workaround, you export the HTML table using jQuery:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/30fc097f-256c-48d9-8b6c-cb821a504045/problem-while-exporting-html-table-to-excelcsv-in-sharepoint-2010?forum=sharepointgeneralprevious
http://community.office365.com/en-us/b/office_365_community_blog/archive/2013/07/31/how-to-use-power-query-for-excel-to-query-a-sharepoint-2013-list-grid-user-post.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Similar Messages

Will Office Web Apps Server 2013 work with SharePoint 2013 sites hosted in SP2010 compatibility mode?

We are planning a upgrade of a SP2010 farm to 2013. There has been a bit of customization so we wish to run the old sites on the new SP2013 platform in SP2010 compatibility mode.
So my question is will Office Web Apps Server 2013 work with the old sites hosted in compatibility mode?
I found a similar query from March 2014 found here
http://sharepoint.stackexchange.com/questions/93101/office-web-apps-2010-running-on-sharepoint-2013-for-compatibility-mode-sites/116281#116281
Has there been an update released to resolve this
Cheers D

Hi ,
According to your description, my understanding is that you need to know whether Office Web Apps 2013 is working with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode.
For my test, Office Web Apps 2013 with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode is working fine.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Crystal report 8.5 export to csv and rtf format not working with office 2013

Hi Experts,
Crystal report version 8.5 hangs and eventually crash when i export my report to csv or rtf format on windows 7 with office 2013 installed, code is written in VB 6 although the same scenario is working with office 2010 installed.
i debugged the code and found the application hangs at function Report.Export(False).
below is the code snippet
       .PDFExportAllPages = True 'ePDFExportAllPages
       .PDFFirstPageNumber = ePDFFirstPageNumber
       .PDFLastPageNumber = ePDFLastPageNumber
       .RTFExportAllPages = True 'eRTFExportAllPages
       .RTFFirstPageNumber = eRTFFirstPageNumber
       .RTFLastPageNumber = eRTFLastPageNumber
       .UseReportDateFormat = eUseReportDateFormat
       .UseReportNumberFormat = eUseReportNumberFormat
       .UseReportNumberFormat = eUseReportNumberFormat
       .XMLAllowMultipleFiles = eXMLAllowMultipleFiles
       .XMLFileName = eXMLFileName
     Report.Export (False) ----Application hangs here and eventually crash
Looking forward for your help, as it is very urgent
Regards
Mohit

Hi Mohit
CR 8.5, being about 15 years old, does not support Windows 7. I am surprised this works for you with MS Office 2010 and to be honest, I'd consider my self lucky there. The fact that is does not work with office 2013... well, like I said, lucky with Office 2010 and your luck ran out with Office 2013.
Your option; rewrite the app in VS 2010 / 2012 / 2013 and use the CR Assemblies for VS .NET from SAP Crystal Reports, Developer Version for Visual Studio .NET. The CR Java SDK would be another option.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Office Web Apps 2013 - Word app not working on Sharepoint 2013 but Excel does

Hi there!
We had some problems with Office Web Apps 2013 not working with Lync, and the status of OWA was unhealty so we decided to install some updates for OWA.
We have downloaded November 2013 update for OWA.
We found out a guide for putting updates on OWA and done this steps:
* Remove-OfficeWebAppsMachine
* Installed the november update
* Restarted OWA server
* ran: New-OfficeWebAppsFarm -InternalUrl https://owasrv.domain.local -ExternalURL
https://owasrv.domain.local -CertificateName "certname" -AllowHttp -EditingEnabled
* Restart-Service WACSM
- checked in IIS in the bindings if the site useses the correct certificate
Then we went on Sharepoint 2013 and ran some commands:
* Remove-SPWOPIBinding –All:$true
* New-SPWOPIBinding -ServerName owasrv.domain.local
* Set-SPWOPIZone –zone “external-https”
Now here are the funny things:
* Excel word app on Sharepoint 2013 works
* Word APP not working (screenshot)
* Lync 2013 powerpoint still not working (screenshot)
* status of OWA is healthy
bostjanc

Hi,
The Friendly name field must be unique within the Trusted Root Certificate Authorities store. In -CertificateName, enter the friendly name you gave your
certificate earlier.
Validate the configuration by navigating to the discovery URL of the Office Web Apps server. Like
https://xxx/hosting/discovery
Meanwhile, the issue is related to Lync, I recommend to you to post the question on Lync Server for further discussion via the link below.
http://social.technet.microsoft.com/Forums/en-US/home?forum=ocsclients
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction
with us. Thank you for your understanding.
Tracy Cai
TechNet Community Support

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Acrobat XI combine to PDF feature is not working with Office 2013 is there a compatibility issue?

Tested with Office 2010 and it works fine
Seems to only be the combine to PDF feature that doesn't work, done updates, tried combining a variety of documents still no joy

There isn't any compatibility issue with Office 2013 and Combine should work with office 2013 same as it with 2010.
Can you please tell us some more details so that we can investigate the problem which you are facing:
1) Please update the exact Acrobat version you are using. This you can find out via "Help -> About Adobe Acrobat XI Pro.." Version should be something like 11.0.x. If it is not 11.0.7, then please update it to 11.0.7 and try again.
2) Is this problem you faced recently (after some update - Acrobat or OS update) or it never used to work earlier for you?
3) You mentioned that when combining, it convert first document only. Can you please let us know how many documents you are combining and what are those formats?
4) Also please update about you environment as well. Is you Operating System and MS Office 32bit or 64bit?
Thanks,
Vishal

Delivery date from PO not updated with inbound delivery (EDI) date

Dear all,
The delivery date in the purchase order (as per my understanding) is the purchase order creation date + the planned delivery time.
We are using EDI and an inbound delivery gets created when the shipping notification is received from the vendor.
The real inbound delivery (EDI) date is usually different from the planned delivery date of the purchase order. But the problem is that the delivery date from the PO is not getting updated with the EDI delivery date.
Is it possible to have the delivery date from the PO updated with the real EDI delivery date?
I need this because I want to calculate planned delivery costs based on the EDI delivery date, and so far when I post the goods receipt (Price Date Category = "Delivery date" in the PO), the system is taking the price valid at the delivery date from the PO instead of taking the price valid at the delivery date of the EDI message.
Thanks a lot,
Annabelle R.

We have applied the note 793478 "Change of the pricing date in EXIT SAPLEINR 003".
In our process flow, an inbound delivery is created with reference to the PO, then the goods receipt is done with reference to this inbound delivery.
When the option 5 "Goods receipt date" is selected in the Conditions Control tab of the purchase order, now when the goods receipt is posted, the price is calculated based on the inbound delivery date, which is what we wanted.

Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !

Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Adobe Drive 3 CMIS work with SharePoint 2013? (Getting errors)

Hello guys.
I'm trying to use Adobe Drive 3 with SharePoint 2013 to sync a folder by CMIS without success.
I get a "Drive already mounted" message with an "Invalid location" error. Already tried using rest and soap url's, and on the SharePoint, the CMIS is
enabled as well as the basic authentication (and the credentials are correct).
Here's my Drive log (http://tny.cz/694b8841)
I believe that this is a SharePoint problem maybe, but I don't know what to look at. Can someone help me on this?
And also, is there anyone that have already did this? (Drive 3 + SharePoint 2013 CMIS).
Thanks in advance,
Matheus Barreto.

Found it only work with Asset Libraries type of library on SharePoint, but even this way, on my Windows side I get a error about the drive the Adobe Drive create... My conclusion for now is that it does not work.

Excel Services Refresh method not working in Sharepoint 2013

Hi,
In our application, we open excel services workbook in sharepoint 2013. Using sessionid of the workbook, we called Refresh and CalculateWorkbook methods in that order. After Calculateworkbook method, I see time stamps in LastUpdatedTime for each connection
in 'Connections' tab of excel workbook. When Refresh method is called again after CalculateWorkbook method, the LastUpdatedTime for the connections becomes blank.
When I use sharepoint 2010, the temstamp is not becoming blank after refresh.
I think due to this reason we see blank data on our reports. Can somebody tell whether there is a problem with Refresh method in sharepoint 2013? Or is there somebody facing problem with excel services in sharepoint 2013? Any pointers can help.
Thanks,
Pranava

Hi，
For your issue, verify if Excel files are rendered by Office Web Apps:
When Office Web Apps is responsible for the rendering the URL will look something like this:
https://server/_layouts/15/WopiFrame.aspx?sourcedoc=/Documents/excel.xlsx&….
And when Excel Calc is rendering the document it should look like the following:
https://server/_layouts/15/xlviewer.aspx?id=/Documents/excel.xlsx&…
Here is an article about how to enable pdf preview with OWA:
http://www.wictorwilen.se/sharepoint-2013-enabling-pdf-previews-with-office-web-apps-2013-march-2013-update
Besides, refer to configure Office Web Apps for SharePoint 2013:
https://technet.microsoft.com/en-us/library/ff431687.aspx
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Office Web Apps not working externally SharePoint 2013

In the production farm we have connected office web apps server which is FQDN server name ( xxx.xxx.corp.local) , we can open the sites internally without any issues, but when we open from externally office web apps asking for authentication and not working
properly.
Please help me how to make it work in external.
Thanks, Ram Ch

You will need a public facing URL or IP address. Check below
You need to configure your OWA for internet
New-OfficeWebAppsFarm –InternalUrl "md1xxx95.jdaxx.corp.local" -ExternalUrl "http://198.xxx.xxx.xxx" -EditingEnabled
Set-SPWOPIZone –zone
“external-http”
Detailed steps in
http://social.technet.microsoft.com/wiki/contents/articles/19039.sharepoint-2013-how-to-enable-office-web-apps-to-work-in-both-internal-and-external-environments.aspx
Set-SPWOPIZone –zone “external-http”
Set-SPWOPIZone –zone “external-http”
If this helped you resolve your issue, please mark it Answered

Can only add music with Autofill from Library (not working with playlists)

I can only add music using the Autofill feature and it will only work when the main music library is selected. Autofill does not work when a playlist is selected and I can not add music directly by dragging songs from a library or playlist as described in the owner's manual.
Is there something wrong with iTunes, the iPod or is this user error?

Hi Steve,
You're right it's the same for me.
I don't know as you mentionned whether it is an user error or not but I've got 2 iPods now, one is 60 Go color display (60Go) and the other received yesterday is 2G iPod Shuffle (Clipod). I can't drag songs from 60Go nor to iTunes Library neither to Clipod Music. The autofill function works only from iTunes Library where I've got 5 songs only (new MacPro), somebody knows how to export 60Go music to iTunes Library ?
Thanks,
Peloche
MacPro 2.66, 6GB, 1.7TB; Mini G4, 1.45, 1GB;iPod 60 GB; 30" & 20" ACD; Apple IIC Mac OS X (10.4.8) X1900XT

Setting Out Of Office from Outlook not working with exchange 2010

Hi
We have an exchange 2010 server with 2 load balanced CAS server and Mailbox servers in a DAG. We have a few domain
names accepted (will call it firstdomain.com and seconddomain.com) but only one is in certificate (firstdomain.com).
The issue is - when user with default email @seconddomain.com try to set “Out Of Office” from outlook (2010 with all service
packs and updates) he is getting “ Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later” where
setting it from webmail works fine and setting it from outlook for users with @firstdomain.com reply address works fine.
we have both internal and external urls for all virtual directories set to external
host address (https://mail.firstdomain.com
  etc). All the users are on intranet with local ip subnets (sites connected via vpns ), all the routing is in place and DNS points to correct ip addresses.
Autodiscover works fine (tested in outlook ) and giving correct address for OOF link
( https://mail.firstdomain.com/ews/exchange.asmx)
wich opens fine if entered into address bar in IE so its NOT AN AUTODISCOVER issue .
I enabled logging in outlook and thats what I am getting in there:
We have an exchange 2010 server with 2 load balanced CAS server and Mailbox servers in a DAG. We have a few domain
name accepted (will call it firstdomain.com and seconddomain.com) but only one is in certificate (firstdomain.com).
The issue is - when user with default email @seconddomain.com try to set “Out Of Office” from outlook (2010 with all service
packs and updates) he is getting “ Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later” where
setting it from webmail works fine and setting it from outlook for users with @firstdomain.com reply address works fine.
we have both internal and external urls for all virtual directories set to external
host address (https://mail.firstdomain.com
  etc). All the users are on intranet with local ip subnets (sites connected via vpns ), all the routing is in place and DNS points to correct ip addresses.
Autodiscover works fine (tested in outlook ) and giving correct address for OOF link
( https://mail.firstdomain.com/ews/exchange.asmx)
wich opens fine if entered into address bar in IE so its NOT AN AUTODISCOVER issue .
I enabled logging in outlook and thats what I am getting in there:
1600       0x49763D20        02/02/15 16:50:44
+++++++++++++++++++++++++++++++
1600       0x49763D20        02/02/15 16:50:44
OWINHTTP SEND HTTP REQUEST BEGIN
1600       0x49763D20        02/02/15 16:50:44
Profile=Outlook
1600       0x49763D20        02/02/15 16:50:44
  [email protected]
1600       0x49763D20        02/02/15 16:50:44
URL=https://mail.firstdomain.com/ews/exchange.asmx
1600       0x49763D5F        02/02/15 16:50:45
GetLastError=0; httpStatus=401.
1600       0x49763D5F        02/02/15 16:50:45
OWinHtpp disabled auth schemes:
1600       0x49763D5F        02/02/15 16:50:45
<NONE>
1600       0x49763D5F        02/02/15 16:50:45
OWinHtpp supported auth schemes:
1600       0x49763D5F        02/02/15 16:50:45
Negotiate
1600       0x49763D5F        02/02/15 16:50:45
NTLM
1600       0x49763D5F        02/02/15 16:50:45
Basic
1600       0x49763D5F        02/02/15 16:50:45
OWinHttp attempting Auto-Negotiate with Desktop Credentials.
1600       0x49763D5F        02/02/15 16:50:45
OWinHttp USING pcreds->dwAuthScheme:
1600       0x49763D5F        02/02/15 16:50:45
Negotiate
1600       0x49763D9D       02/02/15 16:50:45
GetLastError=0; httpStatus=500.
1600       0x49763DAD       02/02/15 16:50:45
OWINHTTP SEND HTTP REQUEST END
1600       0x49763DAD       02/02/15 16:50:45
Last thing - we are using proxy server and with proxy off it works fine although all
possible exchange server hosts/domains/ip addresses excluded from proxy.
Aside from obvious question - what can be wrong and what to test next, another question
is - how can I check/monitor setting OOF on server side (log files etc)?
Last thing - we are using proxy server and with proxy off it works fine although all
possible exchange server hosts/domains/ip addresses excluded from proxy.
Aside from obvious question - what can be wrong and what to test next, another question
is - how can I check/monitor setting OOF on server side (log files etc)?
Thanks

Hi,
According to your description, I understand that Outlook client with second domain name cannot use OOF setting and get an error “Your Out of Office settings cannot be displayed, because the server is currently unavailable.” However OWA works fine.
If I misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether all account or some special user experience this question.
Would you please try to reconfigure Outlook profile in other Computer, Outlook version and return the results?
If this issue only appeared on Outlook 2010, please refer to below link to troubleshooting:
https://support.microsoft.com/kb/2596516?wa=wsignin1.0
Please try to run ExBPA to test OOF to get more details about this question. Additional, I find a similar thread about your question, for your reference:
https://social.technet.microsoft.com/Forums/exchange/en-US/81ebc1de-c899-4097-b224-a0e4b33e4162/users-cant-open-out-of-office-assistant
Best Regards,
Allen Wang

DAT 12\24 Not working with COMPAQ prosignia 500

Hi all,
I have one Compaq Prosignia 500 Server with me.
OS installed on this is Novell netware 4.12
earlier we have DAT Drive of Seagate (4\8 GB)
Now we have to change it with HP (12\24) GB as 4\8 DAT notr wokring & not
available in Market easily.
problem we face is that Prosignia server show This DAT Drive
with SCSI ID 6 .
But on consol in disk Inforantion , this DAT Drive is missing
due to this we are not able to take backup
pl. Give solution if any

Don't believe this has anything to do with queue based printing ..
suggest you post to the backup newsgroup instead.
Peter
eDirectory Rules!

Search not working in SharePoint 2013 - Event ID 1314 - Crawler:Gatherer Plugin

I have one web application and three host-named site collections. I had read an article that I just need to have the web application URL in the content source for the search to work, but that didn't resolve my issue.
https://webapplication - main root web application
https://staff.domain.com - Host name site collection
https://services.domain.com Host name site collection
https://sharepoint.domain.com host name site collection.
I have also created the registry entry for BackConnectionHostNames also.
Under Search Application topology I have all green check marks, but searchable items are listed as 0.
I am getting the following errors on my SharePoint 2013 server.
The start address https://sharepoint.domain.com cannot be crawled.
Context: Application 'Connect_Search', Catalog 'Portal_Content'
Details:
This URL is part of a host header SharePoint deployment and the search application is not configured to crawl individual host header sites. This will be crawled as a part of the host header Web application if configured as a start address.
(0x80040de4)
The start address https://webapplication cannot be crawled.
Context: Application 'sharepoint_Search', Catalog 'Portal_Content'
Details:
The secure sockets layer (SSL) certificate sent by the server was invalid and this item will not be crawled.   (0x80041223)
The start address https://services.domain.com cannot be crawled.
Context: Application 'sharepoint_Search', Catalog 'Portal_Content'
Details:
This URL is part of a host header SharePoint deployment and the search application is not configured to crawl individual host header sites. This will be crawled as a part of the host header Web application if configured as a start address.
(0x80040de4
The start address https://staff.domain.com cannot be crawled.
Context: Application 'Sharepoint_Search', Catalog 'Portal_Content'
Details:
This URL is part of a host header SharePoint deployment and the search application is not configured to crawl individual host header sites. This will be crawled as a part of the host header Web application if configured as a start address.
(0x80040de4)
any help would be greatly appreciated.

Hello Derek,
as I see you are using Host Named Site Collections.
You have two Problems.
First:
The start address https://webapplication cannot be crawled.
Context: Application 'sharepoint_Search', Catalog 'Portal_Content'
Details:
The secure sockets layer (SSL) certificate sent by the server was invalid and this item will not be crawled.   (0x80041223)
You Need to fix this first!! You have a Problem with your SSL Certificate!
The Webapplication is where normally the Search Crawler would enter the crawl in a Host Named Site Collection Scenario.
As soon as you fix this, remove the entries for your Host Named Site Collections from the Crawler. Just leave your Webapplication in it. The HNSC will be crawled automatically. This is the following of your Errors:
The start address https://services.domain.com cannot be crawled.
Context: Application 'sharepoint_Search', Catalog 'Portal_Content'
Details:
This URL is part of a host header SharePoint deployment and the search application is not configured to crawl individual host header sites. This will be crawled as a part of the host header Web application if configured as a start address.
(0x80040de4
Be sure that you created your Webapplication NOT
AS A HOST NAMED WEB APPLICATION!
If you can check everything I mentioned above, your search should hopefully start to work.
King regards!

Excel 2013 Data From Web not working with SharePoint 2013?

Similar Messages

Maybe you are looking for