Excel without using com objects

Is anyone aware of a method of reading an excel sheet in CF8 that does not make use of com [basically all the tags they disable in most shared hosting]
-thanks
-sean

I want to let anyone who reads this thread know that I finally solved this problem.
I created a special application pool for the wcf. The key features are Identity - Network Services and Enable 32 bit applications - True.
Bob
Bob Avallone

Similar Messages

  • Powershell send mail with custom voting option without using outlook object?

    Hi,
    I am currently sending emails through using new-object Net.Mail.SMTPclient because the server that runs the script does not have outlook application.
    My goal right now is to be able to send automated emails that have custom voting option on it where people who receive it in outlook can respond through the voting system.
    Is it possible to do this without using new-object -com outlook.application?

    Hi,
    I am currently sending emails through using new-object Net.Mail.SMTPclient because the server that runs the script does not have outlook application.
    My goal right now is to be able to send automated emails that have custom voting option on it where people who receive it in outlook can respond through the voting system.
    Is it possible to do this without using new-object -com outlook.applicatio

  • ALV Tree Report without using ABAP Objects

    Hi all,
    I want to know the name of a function module to create ALV Tree in SE38 as a report. I am required to create this ALV Tree Report without using ABAP OBJECTS. Can u pls help me as early as possible.

    Hi
    see this link
    http://www.sapdev.co.uk/reporting/alv/alvtree.htm
    *& Report  ZBCALV_TREE
    REPORT  ZBCALV_TREE.
    class cl_gui_column_tree definition load.
    class cl_gui_cfw definition load.
    data tree1  type ref to cl_gui_alv_tree.
    data mr_toolbar type ref to cl_gui_toolbar.
    include <icon>.
    include bcalv_toolbar_event_receiver.
    include bcalv_tree_event_receiver.
    data: toolbar_event_receiver type ref to lcl_toolbar_event_receiver.
    data: gt_VBAK  type VBAK occurs 0,      "Output-Table
          gt_fieldcatalog type lvc_t_fcat, "Fieldcatalog
          ok_code like sy-ucomm.           "OK-Code
    start-of-selection.
    end-of-selection.
      call screen 100.
    *&      Module  STATUS_0100  OUTPUT
          text
    module STATUS_0100 output.
      SET PF-STATUS 'MAIN'.
    if tree1 is initial.
        perform Zinit_tree.
      endif.
      call method cl_gui_cfw=>flush.
    endmodule.                 " STATUS_0100  OUTPUT
    *&      Form  Zinit_tree
          text
    -->  p1        text
    <--  p2        text
    form Zinit_tree .
    perform Zbuild_fieldcatalog.
    create container for alv-tree
    data: l_tree_container_name(30) type c,
            l_custom_container type ref to cl_gui_custom_container.
      l_tree_container_name = 'TREE1'.
    if sy-batch is initial.
        create object l_custom_container
          exporting
                container_name = l_tree_container_name
          exceptions
                cntl_error                  = 1
                cntl_system_error           = 2
                create_error                = 3
                lifetime_error              = 4
                lifetime_dynpro_dynpro_link = 5.
        if sy-subrc <> 0.
          message x208(00) with 'ERROR'.                        "#EC NOTEXT
        endif.
      endif.
    create tree control
      create object tree1
        exporting
            parent              = l_custom_container
            node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
            item_selection      = 'X'
            no_html_header      = ''
            no_toolbar          = ''
        exceptions
            cntl_error                   = 1
            cntl_system_error            = 2
            create_error                 = 3
            lifetime_error               = 4
            illegal_node_selection_mode  = 5
            failed                       = 6
            illegal_column_name          = 7.
      if sy-subrc <> 0.
        message x208(00) with 'ERROR'.                          "#EC NOTEXT
      endif.
    create Hierarchy-header
      data l_hierarchy_header type treev_hhdr.
      perform zbuild_hierarchy_header changing l_hierarchy_header.
    create info-table for html-header
      data: lt_list_commentary type slis_t_listheader,
            l_logo             type sdydo_value.
      perform Zbuild_comment using
                     lt_list_commentary
                     l_logo.
    repid for saving variants
      data: ls_variant type disvariant.
      ls_variant-report = sy-repid.
    create emty tree-control
      call method tree1->set_table_for_first_display
        exporting
          is_hierarchy_header = l_hierarchy_header
          it_list_commentary  = lt_list_commentary
          i_logo              = l_logo
          i_background_id     = 'ALV_BACKGROUND'
          i_save              = 'A'
          is_variant          = ls_variant
        changing
          it_outtab           = gt_VBAK "table must be emty !!
          it_fieldcatalog     = gt_fieldcatalog.
    create hierarchy
      perform Zcreate_hierarchy.
    add own functioncodes to the toolbar
      perform zchange_toolbar.
    register events
      perform zregister_events.
    endform.                    " Zinit_tree
    *&      Form  Zbuild_fieldcatalog
          text
    -->  p1        text
    <--  p2        text
    form Zbuild_fieldcatalog .
    get fieldcatalog
      call function 'LVC_FIELDCATALOG_MERGE'
        exporting
          i_structure_name = 'VBAK'
        changing
          ct_fieldcat      = gt_fieldcatalog.
      sort gt_fieldcatalog by scrtext_l.
    change fieldcatalog
      data: ls_fieldcatalog type lvc_s_fcat.
      loop at gt_fieldcatalog into ls_fieldcatalog.
        case ls_fieldcatalog-fieldname.
          when 'AUART' .
            ls_fieldcatalog-no_out = 'X'.
            ls_fieldcatalog-key    = ''.
        endcase.
        modify gt_fieldcatalog from ls_fieldcatalog.
      endloop.
    endform.                    " Zbuild_fieldcatalog
    *&      Form  zbuild_hierarchy_header
          text
         <--P_L_HIERARCHY_HEADER  text
    form zbuild_hierarchy_header changing
                                   p_hierarchy_header type treev_hhdr.
      p_hierarchy_header-heading = 'Hierarchy Header'.          "#EC NOTEXT
      p_hierarchy_header-tooltip =
                             'This is the Hierarchy Header !'.  "#EC NOTEXT
      p_hierarchy_header-width = 30.
      p_hierarchy_header-width_pix = ''.
    endform.                    " zbuild_hierarchy_header
    *&      Form  Zbuild_comment
          text
         -->P_LT_LIST_COMMENTARY  text
         -->P_L_LOGO  text
    form Zbuild_comment   using
                           pt_list_commentary type slis_t_listheader
                           p_logo             type sdydo_value.
    data: ls_line type slis_listheader.
    LIST HEADING LINE: TYPE H
      clear ls_line.
      ls_line-typ  = 'H'.
    LS_LINE-KEY:  NOT USED FOR THIS TYPE
      ls_line-info = 'ALV-tree-demo: flight-overview'.          "#EC NOTEXT
      append ls_line to pt_list_commentary.
    STATUS LINE: TYPE S
      clear ls_line.
      ls_line-typ  = 'S'.
      ls_line-key  = 'valid until'.                             "#EC NOTEXT
      ls_line-info = 'January 29 1999'.                         "#EC NOTEXT
      append ls_line to pt_list_commentary.
      ls_line-key  = 'time'.
      ls_line-info = '2.00 pm'.                                 "#EC NOTEXT
      append ls_line to pt_list_commentary.
    ACTION LINE: TYPE A
      clear ls_line.
      ls_line-typ  = 'A'.
    LS_LINE-KEY:  NOT USED FOR THIS TYPE
      ls_line-info = 'actual data'.                             "#EC NOTEXT
      append ls_line to pt_list_commentary.
      p_logo = 'ENJOYSAP_LOGO'.
    endform.                    " Zbuild_comment
    *&      Form  Zcreate_hierarchy
          text
    -->  p1        text
    <--  p2        text
    form Zcreate_hierarchy .
    data: ls_vbak type vbak,
          lt_vbak  type vbak occurs 0.
    get data
      select * from vbak into table lt_vbak
                            up to 200 rows .                "#EC CI_NOWHERE
      sort lt_vbak by AUART.
    add data to tree
      data: l_AUART_key type lvc_nkey.
    loop at lt_vbak into ls_vbak.
        on change of ls_vbak-AUART.
          perform Zadd_AUART_line using   ls_vbak
                                  changing l_AUART_key.
        endon.
      endloop.
    calculate totals
      call method tree1->update_calculations.
    this method must be called to send the data to the frontend
      call method tree1->frontend_update.
    endform.                    " Zcreate_hierarchy
    *&      Form  Zadd_AUART_line
          text
         -->P_LS_vbak  text
         -->P_0379   text
         <--P_L_AUART_KEY  text
    form Zadd_AUART_line  using    p_ls_vbak type vbak
                                   p_relat_key type lvc_nkey
                         changing  p_node_key type lvc_nkey.
      data: l_node_text type lvc_value,
            ls_vbak type vbak.
    set item-layout
      data: lt_item_layout type lvc_t_layi,
            ls_item_layout type lvc_s_layi.
      ls_item_layout-t_image = '@3P@'.
      ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
      ls_item_layout-style   =
                            cl_gui_column_tree=>style_intensifd_critical.
      append ls_item_layout to lt_item_layout.
    add node
      l_node_text =  p_ls_vbak-AUART.
      data: ls_node type lvc_s_layn.
      ls_node-n_image   = space.
      ls_node-exp_image = space.
      call method tree1->add_node
        exporting
          i_relat_node_key = p_relat_key
          i_relationship   = cl_gui_column_tree=>relat_last_child
          i_node_text      = l_node_text
          is_outtab_line   = ls_vbak
          is_node_layout   = ls_node
          it_item_layout   = lt_item_layout
        importing
          e_new_node_key   = p_node_key .
    endform.                    " Zadd_AUART_line
    *&      Form  zchange_toolbar
          text
    -->  p1        text
    <--  p2        text
    form zchange_toolbar .
    get toolbar control
      call method tree1->get_toolbar_object
        importing
          er_toolbar = mr_toolbar.
      check not mr_toolbar is initial.
    add seperator to toolbar
      call method mr_toolbar->add_button
        exporting
          fcode     = ''
          icon      = ''
          butn_type = cntb_btype_sep
          text      = ''
          quickinfo = 'This is a Seperator'.                    "#EC NOTEXT
    add Standard Button to toolbar (for Delete Subtree)
      call method mr_toolbar->add_button
        exporting
          fcode     = 'DELETE'
          icon      = '@18@'
          butn_type = cntb_btype_button
          text      = ''
          quickinfo = 'Delete subtree'.                         "#EC NOTEXT
    add Dropdown Button to toolbar (for Insert Line)
      call method mr_toolbar->add_button
        exporting
          fcode     = 'INSERT_LC'
          icon      = '@17@'
          butn_type = cntb_btype_dropdown
          text      = ''
          quickinfo = 'Insert Line'.                            "#EC NOTEXT
    set event-handler for toolbar-control
      create object toolbar_event_receiver.
      set handler toolbar_event_receiver->on_function_selected
                                                          for mr_toolbar.
      set handler toolbar_event_receiver->on_toolbar_dropdown
                                                          for mr_toolbar.
    endform.                    " zchange_toolbar
    *&      Form  zregister_events
          text
    -->  p1        text
    <--  p2        text
    form zregister_events .
    define the events which will be passed to the backend
      data: lt_events type cntl_simple_events,
              l_event type cntl_simple_event.
    define the events which will be passed to the backend
      l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
      append l_event to lt_events.
      l_event-eventid = cl_gui_column_tree=>eventid_checkbox_change.
      append l_event to lt_events.
      l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
      append l_event to lt_events.
      l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
      append l_event to lt_events.
      l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
      append l_event to lt_events.
      l_event-eventid = cl_gui_column_tree=>eventid_header_click.
      append l_event to lt_events.
      l_event-eventid = cl_gui_column_tree=>eventid_item_keypress.
      append l_event to lt_events.
      call method tree1->set_registered_events
        exporting
          events                    = lt_events
        exceptions
          cntl_error                = 1
          cntl_system_error         = 2
          illegal_event_combination = 3.
      if sy-subrc <> 0.
        message x208(00) with 'ERROR'.                          "#EC NOTEXT
      endif.
    set Handler
      data: l_event_receiver type ref to lcl_tree_event_receiver.
      create object l_event_receiver.
      set handler l_event_receiver->handle_node_ctmenu_request
                                                            for tree1.
      set handler l_event_receiver->handle_node_ctmenu_selected
                                                            for tree1.
      set handler l_event_receiver->handle_item_ctmenu_request
                                                            for tree1.
      set handler l_event_receiver->handle_item_ctmenu_selected
                                                            for tree1.
    endform.                    " zregister_events
    *&      Module  USER_COMMAND_0100  INPUT
          text
    module USER_COMMAND_0100 input.
    ok_code  = sy-ucomm.
    clear sy-ucomm.
    case ok_code.
        when 'EXIT' or 'BACK' or 'CANC'.
          perform Zexit_program.
        when others.
          call method cl_gui_cfw=>dispatch.
      endcase.
      clear ok_code.
      call method cl_gui_cfw=>flush.
    endmodule.                 " USER_COMMAND_0100  INPUT
    *&      Form  Zexit_program
          text
    -->  p1        text
    <--  p2        text
    form Zexit_program .
      call method tree1->free.
      leave program.
    endform.                    " Zexit_program
    <b>Reward if usefull</b>

  • ALV tree without using abap objects---------urgent

    hi
    can anybody send  me code for making alv tree without using ABAP objects.
    thanks in advance
    Aditya

    HI
    goto this link
    you will get all ALV TREE programs
    follow that code you can understand very easily
    http://www.sapdev.co.uk/reporting/alv/alvtree.htm
    <b>Reward if usefull</b>

  • Data download to multiple sheets in Excel without using OLE

    Hi,
    Please let me know if it is possible to download data to multiple sheets in excel without using OLE method
    I am in SRM system and the OLE methods are not working
    Please share some sample code or reference links if any
    Thanks
    SekharJ
    Edited by: SekharJ on Sep 8, 2009 8:43 AM

    Here is my code
      LOOP AT it_final INTO wa_final.
        AT FIRST.
          l_ixml = cl_ixml=>create( ).
          l_document = l_ixml->create_document( ).
          l_element_flights  = l_document->create_simple_element(
                      name = 'PO_Details'
                      parent = l_document ).
        ENDAT.
        l_element_airline  = l_document->create_simple_element(
                    name = 'PO'
                    parent = l_element_flights  ).
        l_value = wa_final-object_id.
        l_rc = l_element_airline->set_attribute( name = 'Objectid' value =
                                                             l_value ).
        l_value = wa_final-description.
        l_rc = l_element_airline->set_attribute( name = 'Description' value =
                                                             l_value ).
        l_value = wa_final-number_int.
        l_rc = l_element_airline->set_attribute( name = 'Item' value =
                                                             l_value ).
        l_value = wa_final-description1.
        l_rc = l_element_airline->set_attribute( name = 'Description1' value =
                                                             l_value ).
        l_value = wa_final-quantity.
        l_rc = l_element_airline->set_attribute( name = 'Quantity' value =
                                                             l_value ).
        l_value = wa_final-capex.
        l_rc = l_element_airline->set_attribute( name = 'Capex' value =
                                                             l_value ).
        l_value = wa_final-ser_num.
        l_rc = l_element_airline->set_attribute( name = 'SerialNo' value =
                                                             l_value ).
        l_value = wa_final-plant.
        l_rc = l_element_airline->set_attribute( name = 'Plant' value =
                                                             l_value ).
        l_value = wa_final-loc.
        l_rc = l_element_airline->set_attribute( name = 'Location' value =
                                                             l_value ).
        l_value = wa_final-bundle.
        l_rc = l_element_airline->set_attribute( name = 'Bundle' value =
                                                             l_value ).
      ENDLOOP.
      l_streamfactory = l_ixml->create_stream_factory( ).
      l_ostream = l_streamfactory->create_ostream_itable( table =
    l_xml_table ).
      l_renderer = l_ixml->create_renderer( ostream  = l_ostream
                                            document = l_document ).
      l_rc = l_renderer->render( ).
      l_xml_size = l_ostream->get_num_written_raw( ).
        CALL METHOD cl_gui_frontend_services=>gui_download
          EXPORTING
            bin_filesize = l_xml_size
            filename     = 'c:\temp\flights.xlsx'
            filetype     = 'BIN'
          CHANGING
            data_tab     = l_xml_table
          EXCEPTIONS
            OTHERS       = 24.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                     WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    Edited by: SekharJ on Sep 8, 2009 12:04 PM
    Edited by: SekharJ on Sep 8, 2009 12:15 PM

  • Using COM object library & components in Java

    I've built an application that allows a PC (connected to a mobile phone by cable) to send & receive SMS from another mobile phones, using VB & Nokia PC Connectivity SDK. I want to rewrite the application in Java.
    As I have read in the documentation, Nokia PC Connectivity libraries are implemented as COM libraries. That is why I am asking if can I use COM object libraries & components in Java???
    And does Java environment supports object libraries as VB or C++ does???
    I am a VB programmer, but I am migrating now to Java which is why I have little knowledge about it. Please be kind enough to help me with this & with my learning about Java. Any help & suggestions are very well accepted.
    Thanks a lot

    I suggest that if you have a COM library dependency and lock-in, then Java is not the natural choice of platform. If you can re-write the Nokia connectivity app in Java, then that would be best. If you are just doing this to learn Java, then leave it and learn Java on a diff project!
    When you talk of object libraries, I am guessing you are just talking about software components (as COM objects could be classed)... in which case - of course Java supports components. Take a look at JavaBeans.
    HTH

  • DTC and Oracle without using COM+

    I have a C++ application that uses an Oracle 9i database and MSMQ. I want to use the DTC so I can create a single transaction to get a message off of the queue and then enter its data into the database.
    My problem is that I can't find any information on how to do that. Most references are for using COM+ components. The microsoft web site has some information, however, it uses just sequel server (of course).
    Does anyone know where I might find such information?
    Your help will be appreciated?
    Jerry J

    Check it out distributed transaction without using COM+ from latticesoft.com:
    Below is the code how to use it:
    TransactionContext ctx = TransactionContextFactory.GetContext(TransactionLevel.RequiresNew);
    Try
    ctx.BeginTransaction();
    getMessageOffQueue();
    insertDatabase();
    ctx.Commit();
    catch(EXception)
    ctx.Rollback();
    LatticeLog.Log("message");
    finally
    ctx.Exit();
    Here is link: http://www.latticesoft.com
    looking for Lattice.DataMapper document, it will show you how to use Distributed Transaction API.

  • How to transfer data between spreadsheets without using Business Objects?

    Hello, every time I try and log onto the business objects platform I keep getting "this system can be contacted but there is no central management server running at port 6400".  All I need to do is pass variables between spreadsheets. Both files are located in the same folder. Below are the links ive tried but have been unsuccessful  to pass data.
    (This link I used the swf loader component child and flash variables task Daya posted on Feb 15. However nothing loaded. The link wasnt a link i could display is in a browser. So i kept getting 0% when in preview mode.
    Passing values from dashboard to dashboard with Flash Variables
    Next I tried the following link. I did everything word for word and was able to display both files on the html page, but no link or connection between them existed. I would select a state and noting happened to the other swf files chart. Does this need to be in the Business Objects platform?
    Dashboards 4.0: Connect to an external
    Lastly , I used the link below. I followed everything and was able to get interaction from the parent to child however with only the files that were available on this thread. Their URL was this http://myxcelsius.com/wp-content/uploads/2010/10/child.swf?salesman=Schrute,Dwight. I get the concatenation but I dont get how this URL was generated? How do I develop my URL? My URL is able to display in a browser. My URL is
    http://kln-ftvp/KLNPheonix//LinkToReport.htm?fqn=MyEnterprise.Public.graphtest&run=true
    SWF Loader shows 100% instead of Dashboard.
    Even with my URL being able to display in internet explorer, I still only show 100% and a blank screen. Can anyone help me with any of the issues I am having trouble with? Your help is most appreciated. Thank you.

    It looks like you have more than one problems so it might be good to separate them out.
    Issue 1 - Logging on to BusinessObjects
    You say that when you try log on to the BO Platform you get the error message there is no central management server running on port 6400. I'm assuming you are trying to do this from the Dashboard designer.
    Does it work when you try to log on from the web browser?
    Make sure that you enter the correct system name in the system field when trying to log on from Designer. If you are unsure, either check what system name is used when you log on from your browser or check with your BO administrator.
    Issue 2 - Passing values to a child dashboard
    If you try to preview the dashboard in the designer, remember that the swf loader doesn't work in preview mode, so whatever you are trying to display won't be visible.
    First of all you need to have 2 separate flash files that works independently of each other. The one that you are planning to use as a child flash, make sure that you create the flash variables so you can pass variables to it and use them to filter your data if that is your requirement. But hold off on that for now.
    When you have 2 working flash files, save them both to the BI Launch Pad (or InfoView if you are on 3.1) and make sure they both work there. Then get the opendocument url for the child dashboard and try to open it in your browser directly using this url. If that works, use the same url in the swf viewer in the parent dashboard, save the parent dashboard back to BI Launch Pad and open it. It should now work.
    Let me know if you have any problems with these steps.
    Cheers,
    Josh

  • How to populate the last empty row in Excel without using Report Generation Kit

    I wrote  a Labview SUb Vi that uses Report Generation Toolkit that is not loaded on the test stand. I am looking to convert it from Report Generation Vi like New Report,  Append Table to Report, Dispose Report. The tunneling through all the report generation Vis seems extensive. Code is attached. Thanks, Greg
    Greg

    Thank you that was a big help...
    I used the Excel Forum to get a lot of great ideas.  My code is almost working.
    There is a 2-D String Array that represents the String data that I am exporting to the Excel File Sheet 1 - 5.
    I am attempting to determine the last populated row in sheet 1 then populate the next row of Sheet 1.  Since all 5 sheets are populated every time, I should not have to search every sheet for the last row.
    I am getting two row populated on sheet 1 with seeming the same data.
     I found an AXExcelWrite2D ArrayWorksheet.vi that I thought would work.  I think there is a Table  determination that is causing me problems.  The link is http://lavag.org/topic/13324-labview-and-excel-activex-or-ado/.  The Application Invoke Node has a convert formula with "FromReferenceStyle" with R1C1 Attached to it.   I am not sure what this function is doing.  When I try to bring the function help up, there is a missing file.
    I am including both the new active x vi and the report generation vi.   Report Generation VI works.
    I would appreciate any assistance I can get on this.
    Thanks
    Greg
    Greg
    Attachments:
    REPU Test Data Population using Active X Write Save.vi ‏92 KB
    REPU Test Data Population.vi ‏60 KB

  • How to Send One file to different Receiver Systems without using ESR Object

    Hi Gurus
    I have developed two interafces in my current project and they are both By pass scenarios. My requirement was to Send Data from MDM system to BW system. This development does not involve any ESR objects, By Pass sceanrio.
    Now there is the requirement to Send one file or files from MDM system to different BW( two BW systems for different regions)
    How can i accomplish this.
    here we are not using any ESR Objects, so to maintain any condition in Receiver Determination is not possible.
    Please let me know how to do this.
    Tahnx in advance.

    Hi Arjun,
    If i understand your situation correctly, You need to define two separate Business Systems/Components in SLD for each BW system.
    if you intend to send the file from MDM to both the BW systems, then you need to configure the following:
    1. If you want to follow the classical approach (for this by-pass scenario):
    a) Two receiver channels - One for each BW system
    b) Two receiver agreements for each channel
    c) One Receiver determination - with both the receiver systems added as receivers (w/o condition)
    d) Two interface determination - Dummy mappings as it is a by-pass scenario
    2. If yo want to go ahead with the Integrated Configuration (most preferred in this case):
    a)  Two receiver channels - One for each BW system
    b) One Integrated Configuration Scenario (ICO) with both the receivers configured in Outbound Processing tab
    Let us know if you were looking for something else (as your problem statement is not very clear)
    Hope this helps.
    Regards, Gaurav

  • Upload an excel file input into an itab,display in ALV using ABAP objects

    Requirement:
    Create a selection screen which takes an excel file as input with parameters emp id, emp name, salary, mnth, ph no.
    Create a database table with the same fields.
    The program needs to have two modes. Display mode and update mode.
    Display mode only displays the file data in alv grid and update mode updates database table with similar parameters as above and also shows alv grid output.
    task is to do using Object oriented approach. This should also have the facility to modify the cell values in ALV grid and once saved then it needs to update the database accordingly.
    I have done the same functionality in a report program without using ABAP objects but finding difficulty in using object oriented approach.Please help me as i am new to abap-objects.
    Thanks in advance.......

    Hi,
    The selection screen design and all remains the same.
    Get all the detials which you need in your final internal table.
    This internal table will be used to display in the ALV grid.
    The approach remains the same as the normal programing.
    Prepare a field catalog table and then use it along with the internal table to display in the grid.
    The only change is that instead of FM you will have to make us of classes and their methods.
    Firstly you will have to create a screen.
    On this screen create a custom control object and give it some name. say for eg. CC_CONTAINER.
    This will be a container on which the ALV grid object will be placed.
    2 objects are needed to display the grid
    CL_GUI_CUSTOM_CONTAINER and CL_GUI_ALV_GRID.
    In the PBO of the screen first create an instance of object CL_GUI_CUSTOM_CONTAINER
    CREATE OBJECT y_lobj_cont
          EXPORTING
             container_name              = 'CC_CONTAINER'
          EXCEPTIONS
            cntl_error                  = 1
            cntl_system_error           = 2
            create_error                = 3
            lifetime_error              = 4
            lifetime_dynpro_dynpro_link = 5
            OTHERS                      = 6.
        IF sy-subrc NE 0.
          MESSAGE ID sy-msgid TYPE y_k_s NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    Then create a instance of the GRID
    IF y_lobj_grid IS INITIAL.
          CREATE OBJECT y_lobj_grid
            EXPORTING
              i_parent          = y_lobj_cont
             EXCEPTIONS
               error_cntl_create = 1
               error_cntl_init   = 2
               error_cntl_link   = 3
               error_dp_create   = 4
               OTHERS            = 5 .
          IF sy-subrc NE 0.
            MESSAGE ID sy-msgid TYPE y_k_s NUMBER sy-msgno
                       WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
        ENDIF.
    Then call the method SET_TABLE_FOR_FIRST_DISPLAY to display the grid.
    CALL METHOD y_lobj_grid->set_table_for_first_display
          EXPORTING
            it_toolbar_excluding          = y_v_lt_exclude
          CHANGING
            it_outtab                     = y_li_tbl
            it_fieldcatalog               = y_li_fcat
          EXCEPTIONS
            invalid_parameter_combination = 1
            program_error                 = 2
            too_many_lines                = 3
            OTHERS                        = 4.
        IF sy-subrc NE 0.
          MESSAGE ID sy-msgid TYPE y_k_s NUMBER sy-msgno
                     WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    Check the example program BCALV_GRID_EDIT for better understanding.
    Regards,
    Ankur Parab

  • Permission to use BPMaster object

    Hi
    I am working on SAP 2005A SP01 i have made some changes in users Permission and I am encountering a big problem while creating an object of Business partner Master Data. I get a SBO error message saying "The Loged On user does not have permission to use this object". I have tried hard to rectify it and have even discussed it on forums but have not received any valid solution to this. Anyone from you who has experienced this problem before and has rectified it(without using query object) do let me know If there is no solution available in this version then by which version of SAPb1 can we expect this problem to be overcome.

    Hi Pradeep,
    No, unfortunately, I think you've got to give full authorisation for BPs to the current user if you wish to use the BP object in the DI. Your choices are really only limited to Full or No authorisations.
    As for future versions, I haven't heard that the authorisations will have changed in version 2007 so it could be a long time before you see the functionality you'd like. You can always log a DRQ with SAP, requesting such a change (the more DRQs that SAP receive on a particular issue, the higher its priority for inclusion in a future version).
    Kind Regards,
    Owen

  • Instantiating COM objects from within the java code in WLS

    is there a way to use COM objects from servlets or ejb's,
    with JVM, not with JView.
    thanks,
    ali.

    Sun has released a beta product - its a COM bridge that you can use
    to connect a Java2 JVM to a COM object with. I havent tried it yet
    but I probably will soon.
    Brad
    "Michael Girdley" <[email protected]> wrote in message news:39b86deb$[email protected]..
    >
    >
    No, at the current time we only support COM integration when using the
    Microsoft JVM. The Jintegra product from Linar is good.
    Thanks,
    Michael
    Michael Girdley
    BEA Systems Inc
    "Ali Ozgun" <[email protected]> wrote in message
    news:[email protected]..
    is there a way to use COM objects from servlets or ejb's,
    with JVM, not with JView.
    thanks,
    ali.

  • Connecting to COM objects

    Hi everyone,
    I've got a project on the horizon that involves using an API to access a database. The API uses COM objects. 
    Can I connect to the API using <cfobject> like this:
    <cfobject 
        class = "program ID"
        name = "myneatobject"
        action = "connect"
        context = "remote"
        server = "http://someserverip">
        type = "com">
    If the server is remote, isn't there some security involved? Login credinentials?  I'm trying to ge my head around this.  There's an exisiting website in place using the API, however we're planning on redoing everything in CF. 
    Thanks for any tips in to set me straight!

    Thanks Guys.
    To be sure I'm describing this properly, I've got the manual for the API (updated in 2009) and it states
    "The  API is a COM+ application (formerly MTS). It
    provides a set of COM objects that can be manipulated by COM-
    compliant development tools such as Visual Basic, Visual C++, Visual
    C#, VSTA and so on.
    The API provides the ability to search and locate accounts across
    multiple  databases. It uses an advanced data cache mechanism to
    minimize round-trips to database servers.
    Once the account is located using a 10-digit telephone, and
    optionally an account number, each subsequent attempt to connect to an
    database requires a company number as well as a valid account
    number."
    The following example shows how to modify an existing user profile information:
    Dim objUserProfile as Object
    Dim lRetCode as Integer
    Set objUserProfile = CreateObject("EnergyAPI.cUserProfile")
    lRetCode = objUserProfile.ModifyUserInfo (sEmailAddress,
    sPassword,sName,sPAsswordHint,sHintAnswer,lPreferences,cSysUser)
    If lRetCode <> 0 Then
      ‘ Failure - Display error message
      Else
        ‘ Success
      End If
    COM+ much different than COM?? Not from what I'm reading.

  • Indesign SDK License for using COM

    Hi,
    I am developing .net application for creating PDF document from adobe indesign file using Adobe indesign COM object. Since i am using COM object, the adobe indesign SDK needed for this development. Please suggest me which product of adobe indesign i need to purchase?
    For reference please refer below link.
    http://www.codeproject.com/KB/COM/Adobe_s_Indesign_COM_obje.aspx.
    Regards
    Raja

    COM is just the Windows way to expose the "high level" object model aka scripting. You make sure InDesign creates a TLB, add that to your VisualStudio and are ready to experience the advantages adventures of .Net strong typing. Details are better discussed in the scripting forum, e.g. where to find the TLB and what to do if it is missing (start InDesign once as admin).
    Edit / Addition: InDesign SDK has almost nothing to do with COM, it is used to write plug-ins (in C++).
    The question whether an InDesign Desktop license is sufficient or you need InDesign Server is better answered by someone who can read the legalese of the matching EULAs. I am not a lawyer, but if the resulting outside application (be it written in .Net or other technology) is just used by a single user to control a single instance of InDesign on the same PC, to me that sounds like a case for InDesign Desktop.
    Dirk

Maybe you are looking for