Exception deployer error codes

Trying to load adobe arcobat using the exception deployer form "ExceptionDeployer --workflow=install --mode=pre --installLanguage=en_US getting a
error code 2 on a PC also using admin command prompt

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Similar Messages

System Level Exception. Error code -17502

Hi,
I have an initialize test step which is written in LabWindows/CVI and I call
that step from TestStand.
In that test step I initialize one dll, first I load DLL (the handle goes to
the global variable) and finally I get the function pointers. When this step
ends, I go back to the TestStand and I got this error. Do you know what is
wrong and how should I do this dll loading because I need this handle later?
TIA,
-Harri

I think something must be happening in either the DLL_PROCESS_ATTACH: of DLL main in the loaded dll. It might be trying to do something which can be causing the system level exception.
System level exception can also be caused because you are calling a dll function incorrectly ie passing a I16 instead of a I32 in the parameters.
I might also be trying to call/release a function reference which is not valid.
I would suggest you to step into your code and make sure that all your reference are valid if and when you call/release them.
You might want to try to trap the 17502 error by following the Knowledge Base link given below
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/a92cf6b69941b35d862568d900693df5?OpenDocument
Anand Jain
Applications Eng
ineer
National Instruments
http://www.ni.com/ask

[ERROR CODE DPL.DS.5107] problem when deploying an app (Bad version number)

Dear colleagues,
please find attached a Java exception trace, where I tried to deploy a sample application to my CE 7.1 (only Java version).
I use JDK version 1.6.0_06: do you know this problem? Do you have any hints?
Compatibility level is put to "6.0": I read only about problems related to JDK 1.5.xx versions.
The consequence is that the component cannot be deployed sucessfully.
Kind regards,
Daniel
[ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 7584050:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5107] Exception during initial start of application de.dkoller/instantdlv~ear in container webservices_container.
        at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:195)
        at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:143)
        at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:419)
        at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
        at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
        at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
        at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:419)
        at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:444)
        at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:334)
        at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
        at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:248)
        at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:389)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3387)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3373)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3276)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3249)
        at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
        at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
        at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
        at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
        at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
        at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
        at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
        at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
        at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
        at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
        at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
        at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
        at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
        at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
        at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
        at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
        at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
        at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
        at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
        at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
        at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Caused by: java.lang.UnsupportedClassVersionError: Bad version number in .class file
        at java.lang.ClassLoader.defineClass1(Native Method)
        at java.lang.ClassLoader.defineClass(ClassLoader.java:654)
        at com.sap.engine.boot.loader.ResourceMultiParentClassLoader.loadClassLocal(ResourceMultiParentClassLoader.java:198)
        at com.sap.engine.boot.loader.MultiParentClassLoader.findClassInLoaderGraph(MultiParentClassLoader.java:302)
        at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:256)
        at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:228)
        at com.sap.engine.services.webservices.server.deploy.ws.WSInitialStartProcess.generateJAXWSFramework(WSInitialStartProcess.java:265)
        at com.sap.engine.services.webservices.server.deploy.ws.WSInitialStartProcess.generateJAXWSFramework(WSInitialStartProcess.java:220)
        at com.sap.engine.services.webservices.server.deploy.ws.WSInitialStartProcess.execute(WSInitialStartProcess.java:140)
        at com.sap.engine.services.webservices.server.deploy.WSBaseAbstractDProcess.makeProcess(WSBaseAbstractDProcess.java:316)
        at com.sap.engine.services.webservices.server.deploy.WebServicesDeployManager.makeStartInitially(WebServicesDeployManager.java:687)
        at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:182)
        ... 36 more

This forum is for the Sun Java System Web Server, not the Sun Java System Application Server. You will likely have better success by posting your question to the Application Server forum(s) at:
http://forum.java.sun.com/category.jspa?categoryID=109

Error code: 2147778144 Cannot find the QE property.

I have been working to get Coldfusion 8 and Crystal Enterprise 10 to work together. The following were two approaches I knew of to try:
1) using Crystal "unmanaged URL reporting":
a href="AOC_Summary.rpt?prompt0=#variables.Record_Month#&prompt1=#variables.Fiscal_Year#&user0=userid&password0=pswdn">AOC SUMMARY</a>
2) using the Coldfusion <cfreport> tag:
<cfreport report = "AOC_Summary.rpt"
dataSource = "#variables.dsn#"
username = "userid"
password = "pswd">
{AB145_AMTS.REC_MONTH} = 5 and
{AB145_AMTS.FISCAL_YEAR} = 8
</cfreport>
I got the CFREPORT tag to work but was disappointed to find that it only rendered the report in HTML. The reports we have been producing with our current configuration of CF4.5 & CR 8.5 can be saved as PDF's. So I abandoned the Coldfusion <cfreport> tag to see if I could get the Crystal "unmanaged URL reporting" to work. This included me trying to find any documentation anywhere to guide me along with going into Crystal Admin and 'experimenting' to see if there was anything I needed to do there to make the unmanaged URL reporting work.
Management is now telling me that producing the report in HTML is acceptable. I am now trying to set up a demo for management. When I went back into my CF code and uncommented the work I had done with the CFREPORT tag (which had been working at the time I commented it out), I receive the following error code.
CrystalReport Integration Exception.
Error code: 2147778144 Cannot find the QE property.
Error source: Crystal Reports ActiveX Designer
I have tried searching the SAP site to find more information on this error message to no avail.   Any guidance would be greatly appreciated.
Regards,
:)mary
Edited by: Mary Fowler on Aug 21, 2008 7:21 PM

I found my mistake. Used wrong .rpt file. (head drooped, tail between the legs)
Thank you for being here!
:)mary

Wmic exception with error 0x80020009

Hi,
When I try to execute any command using wmic, I get an exception with error code = 0x80020009. I've run wmdiag.exe and it shows no problems. I've appended partial output from trying to execute the "process" command using the "/trace:ON" option. Any help would be greatly appreciated.
Thanks, Steven
Operating system: Windows Server 2003
Anti-virus: Kaspersky
Internet Connection: Cisco ASA5505 Firewall
RAM: 32 Gigs
CPU Name: Intel Xeon 5110
Partial output from executing "wmic /trace:ON process":
SUCCESS: IWbemObjectTextSrc::GetText(0, -, WMI_OBJECT_TEXT_CIM_DTD_2_0, -, -)
Line:    413 File: d:\nt\admin\wmi\wbem\tools\wmic\execengine.cpp
SUCCESS: IEnumWbemClassObject->Next(WBEM_INFINITE, 1, -, -)
Line:    446 File: d:\nt\admin\wmi\wbem\tools\wmic\execengine.cpp
SUCCESS: IWbemObjectTextSrc::GetText(0, -, WMI_OBJECT_TEXT_CIM_DTD_2_0, -, -)
Line:    413 File: d:\nt\admin\wmi\wbem\tools\wmic\execengine.cpp
SUCCESS: IEnumWbemClassObject->Next(WBEM_INFINITE, 1, -, -)
Line:    446 File: d:\nt\admin\wmi\wbem\tools\wmic\execengine.cpp
SUCCESS: CoCreateInstance(CLSID_FreeThreadedDOMDocument, NULL, CLSCTX_INPROC_SER
VER, IID_IXMLDOMDocument2, -)
Line:    198 File: d:\nt\admin\wmi\wbem\tools\wmic\formatengine.cpp
SUCCESS: IXMLDOMDocument::loadXML(-, -)
Line:    229 File: d:\nt\admin\wmi\wbem\tools\wmic\formatengine.cpp
SUCCESS: CoCreateInstance(CLSID_XSLTemplate, NULL, CLSCTX_SERVER, IID_IXSLTempla
te, -)
Line:   3219 File: d:\nt\admin\wmi\wbem\tools\wmic\formatengine.cpp
SUCCESS: CoCreateInstance(CLSID_FreeThreadedDOMDocument, NULL, CLSCTX_SERVER,IID
_IXMLDOMDocument2, -)
Line:   3242 File: d:\nt\admin\wmi\wbem\tools\wmic\formatengine.cpp
SUCCESS: IXSLDOMDocument2::put_async(VARIANT_FALSE)
Line:   3254 File: d:\nt\admin\wmi\wbem\tools\wmic\formatengine.cpp
SUCCESS: IXSLDOMDocument2::load(L"C:\WINDOWS\system32\wbem\texttable.xsl", -)
Line:   3269 File: d:\nt\admin\wmi\wbem\tools\wmic\formatengine.cpp
SUCCESS: IXSTemplate::putref_stylesheet(-)
Line:   3283 File: d:\nt\admin\wmi\wbem\tools\wmic\formatengine.cpp
SUCCESS: IXSTemplate::createProcessor(-)
Line:   3295 File: d:\nt\admin\wmi\wbem\tools\wmic\formatengine.cpp
SUCCESS: IXSProcessor::put_input(-)
Line:   3332 File: d:\nt\admin\wmi\wbem\tools\wmic\formatengine.cpp
SUCCESS: IXSProcessor::put_output(-)
Line:   3359 File: d:\nt\admin\wmi\wbem\tools\wmic\formatengine.cpp
FAIL: IXSProcessor::tranform(-)
Line:   3373 File: d:\nt\admin\wmi\wbem\tools\wmic\formatengine.cpp
ERROR:
Code = 0x80020009
Description = Exception occurred.
Facility = Dispatch

Hello,
I have the same problem...
I search to know what happen..
wmic SOFTWAREELEMENT GET Name
Open CMD
wmic
/output:c:\ProgramList.txt product get name,version

Exception Deployer fails with return code 1603 during Acrobat XI installation

We are deploying Acrobat XI to Windows 7 clients and a percentage of them fail to execute Exception Deployer successfully and are returning the 1603 return code. I have pasted below relevant portions of the ExceptionDeployer.log file from two different computers with the same return code. Sometimes running the installation again works but sometimes it fails again with the same error code. I haven't been able to find exactly what it is that is failing or how to resolve this.
4/4/2015 00:04:57 [INFO] ExceptionDeployer - ##################################################
4/4/2015 00:04:57 [INFO] ExceptionDeployer - Launching the ExceptionDeployer...
4/4/2015 00:04:57 [WARN] ExceptionDeployer - Failed to initialize the TokenResolver properly.
4/4/2015 00:04:57 [INFO] ExceptionDeployer - **************************************************
4/4/2015 00:04:57 [INFO] ExceptionDeployer - AcrobatProfessional11.0-mul
4/4/2015 00:05:59 [INFO] ExceptionDeployer - The process return code is (1603).
4/4/2015 00:05:59 [ERROR] ExceptionDeployer - Exception deployment failed for payload (AcrobatProfessional11.0-mul)
4/4/2015 00:05:59 [INFO] ExceptionDeployer - **************************************************
4/6/2015 16:05:56 [INFO] ExceptionDeployer - ##################################################
4/6/2015 16:05:56 [INFO] ExceptionDeployer - Launching the ExceptionDeployer...
4/6/2015 16:05:56 [INFO] ExceptionDeployer - **************************************************
4/6/2015 16:05:56 [INFO] ExceptionDeployer - AcrobatProfessional11.0-mul
4/6/2015 16:07:14 [INFO] ExceptionDeployer - The process return code is (1603).
4/6/2015 16:07:14 [ERROR] ExceptionDeployer - Exception deployment failed for payload (AcrobatProfessional11.0-mul)
4/6/2015 16:07:14 [INFO] ExceptionDeployer - **************************************************

Hi ohtesw,
Please check out this document: Error 1603: A fatal error occurred during installation.
If the solutions in that document don't do the trick, please let us know.
Best,
Sara

Error using Exceptions Deployer

I have packaged Adobe Help as an exception and deployed using the exceptions deployer. Since I am installing this when no user is logged in , I have appended the install command with the recommended sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'`
However, when I switched from installing in 10.6.8 to 10.8.4 , the script now just hangs with no results. If i try to run it when logged in, i get an error
Script result: Starting the ExceptionDeployer...
ExceptionDeployer exiting with Return Code (1)
launchctl bsexec failed: No such file or directory
I have made not changes from 10.6.8 to 10.8.4 in the way in which i package or deploy. I use the Jamf Casper Suite for pushing out packages and scripts

This is NOT Acrobat's installer this is the Creative Suite installer tools (AAMEE, Exceptions Deployer, etc...). It needs to be asked or moved to the correct Adobe Forum.
http://forums.adobe.com/community/creativesuites

System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).

I have been trying to install a piece of software on 2 Windows 7 PCS called Rightfax...during installing I get the error below;
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
It then gives me an error log of ;
2015-04-23 14:43:03Z: Error: Unexpected problem occurred in task worker
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
at TaskWizard.TaskWorker.RunTasks()
at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
2015-04-23 14:43:03Z: Info: Page changed from 'WizardWorkerPage' to 'ResultPage' driven by result 'Next' and exception 'none'
2015-04-23 14:44:06Z: Info: Page changed from 'ResultPage' to 'none' driven by result 'Next' and exception 'none'
2015-04-23 14:44:06Z: Info: Work has not been completed; install state will not be saved.
2015-04-23 14:44:06Z: Info: Reboot status = NotRequired
2015-04-23 14:44:06Z: Info: Exitcode = 0
2015-04-23 14:44:06Z: Info: Logging ended.
I have installed this software succesfully on other machines previously.....

Hi RyanWelsh78,
This forum is discussing about Visual Stuido Tools for Office developing, your issue is related with the installing Rightfax add-in which is a third party product. As the reply from Eugene, you could contact Rightfax add-in developers for help.
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

SCOM 2012 R2 installing on SQL 2012 SP1 - Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

Hi,
I am getting an issue during a SCOM 2012 R2 installation while creating the SCOM DataWarehouse database. Setup seems to timeout during creating the datawarehouse database. I can see all database files created in windows explorer on the SQL server before
setup rolls the SCOM install back.
Has anyone seen this issue before or know how to help resolve it?
Appreciate your help, below is the SCOM installation log:
Thanks
Marc
[13:27:27]: Always: :Creating Database: OperationsManagerDW
[13:35:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:43:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:51:29]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:59:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:07:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:15:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:23:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:31:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:39:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:47:33]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :DB operations failed with SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :Error:Failed to execute sql command. Setup has reached maximum retry limit.
[14:55:33]: Warn: :Sql error: 11. Error: -2. Error Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :Exception running sql string
DECLARE @sql NVARCHAR(MAX);
SET @sql = 'CREATE DATABASE ' + QUOTENAME(@DatabaseName) + '
    ON PRIMARY(NAME=MOM_DATA,FILENAME=''' + REPLACE(@Filename, '''', '''''') + ''',SIZE=' + CAST(@Size AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@FileGrowth AS VARCHAR) + 'MB)
    LOG ON(NAME=MOM_LOG, FILENAME=''' + REPLACE(@LogFilename, '''', '''''') + ''',SIZE=' + CAST(@LogSize AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@LogFileGrowth AS VARCHAR) + 'MB)';
EXEC(@sql);: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Always: :Failed to create and configure the DB with exception.: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion
of the operation or the server is not responding.
[14:55:33]: Always: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
[14:55:33]: Always: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Always: :InnerException.StackTrace:
[14:55:33]: Error: :CreateDataWarehouse failed: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or
the server is not responding.
[14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.OMDataWarehouseProcessor.CreateDataWarehouse()
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :FATAL ACTION: CreateDataWarehouse
[14:55:33]: Error: :FATAL ACTION: DWInstallActionsPostProcessor
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate returned false.
[14:55:33]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item. Setting rollback.
marc nalder

Hi,
Based on the log, I recommend you use the following way to test SQL connectivity.
You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
if it fails to connect.
For more information, please review the link below:
The easy way to test SQL connectivity
http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Null pointer exception in native code. error 52 in Weblogic8.1

Hi all,
I'm using WLS 8.1SP5 with 1.4.2_08 and having this dump once a day, when people is working. I tryed google, but no luck. Can someone can help please?
===== BEGIN DUMP =============================================================
JRockit dump produced after 5 days, 00:39:42 on Mon Oct 01 16:59:00 2007
Additional information is available in:
D:\web\bea\user_projects\domains\APIA_Prod\jrockit.2188.dump
D:\web\bea\user_projects\domains\APIA_Prod\jrockit.2188.mdmp
If you see this dump, please open a support case with BEA and
supply as much information as you can on your system setup and
the program you were running. You can also search for solutions
to your problem at http://forums.bea.com in
the forum jrockit.developer.interest.general.
Error code: 52
Error Message: Null pointer exception in native code
Version : BEA WebLogic JRockit(TM) 1.4.2_08 JVM R24.5.0-61 ari-49095-20050826-1856-win-ia32
Threads / GC : Native Threads, GC strategy: parallel
: mmHeap->data = 0x00B60000, mmHeap->top = 0x40B60000
: mmStartCompaction = 0x1EB60000, mmEndCompaction = 0x23B60000
CPU : Intel Pentium 4 (HT)
Number CPUs : 8
Tot Phys Mem : 4025999360
OS version : Microsoft Windows Server 2003 Service Pack 1 (Build 3790)
State : JVM is shutting down
Command Line : -Djava.class.path=.;C:\Program Files\Java\j2re1.4.2_05;C:\Program Files\Java\j2re1.4.2_05\lib;C:\Program Files\Java\j2re1.4.2_05\lib\tools.jar -Djrockit.launcher.type=jrockit.shipment -Xms1024m -Xmx1024m -Xgc:parallel -Xcleartype:local -Dweblogic.management.server=http://10.128.12.23:7001 -Dbea.home=D:\web\bea -Dweblogic.RootDirectory=D:\web\bea\user_projects\domains\APIA_Prod -Djava.class.path=.;D:\web\bea\jdk142_08\lib\tools.jar;D:\web\bea\WEBLOG~1\server\lib\weblogic_sp.jar;D:\web\bea\WEBLOG~1\server\lib\weblogic.jar -Djava.security.policy==D:\web\bea\WEBLOG~1\server\lib\weblogic.policy -Dweblogic.Name=Apia_Svr1 -Dweblogic.system.BootIdentityFile=D:\web\bea\WEBLOG~1\common\nodemanager\NodeManagerLogs\NodeManagerInternal\bootFile_APIA_Prod_Apia_Svr1 -Dweblogic.system.NodeManagerBoot=true -Dweblogic.system.NodeManagerAddress=null::5555 -Dweblogic.nodemanager.ServerStartTime=1190834358456 -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Dsun.java.command=weblogic.Server
Environment : JAVA_HOME=C:\Program Files\Java\j2re1.4.2_05, java.home=d:\web\bea\jrockit81sp5_142_08\jre, java.class.path=.;D:\web\bea\jdk142_08\lib\tools.jar;D:\web\bea\WEBLOG~1\server\lib\weblogic_sp.jar;D:\web\bea\WEBLOG~1\server\lib\weblogic.jar, java.library.path=d:\web\bea\jrockit81sp5_142_08\bin;.;C:\WINDOWS\system32;C:\WINDOWS;D:\web\bea\WEBLOG~1\server\bin;D:\web\bea\jdk142_08\bin;D:\web\bea\jdk142_08\jre\bin;C:\Program Files\VERITAS\NetBackup\bin\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Java\j2re1.4.2_05\bin
C Heap : Good; no memory allocations have failed
Registers (from context struct at 0x41D6F488/0x41D6F5A4):
Converted EIP: 41eafe45
EAX = 00001e90 EBX = 009db42c
ECX = 003c1e90 EDX = 00000000
ESI = 71c14280 EDI = 00000000
EIP = 41eafe45 ESP = 41d6f870
EBP = 41d6f880 EFL = 00010a03
CS = 001b DS = 0023 ES = 0023
SS = 0023 FS = 003b GS = 0000
Stack:
41d6f870 :00000000 00000000 003c95a8 003c1e90 00000000 004e91e1
41d6f888 :0000008f 00000000 41d6f8c4 009db42c 00000001 00000000
41d6f8a0 :41b802e0 4cfa3940 012b5068 4d87a5cc 012b5068 00000000
41d6f8b8 :012b5068 41b81710 4ccfcdda 009b9ba8 004e9244 012b5310
41d6f8d0 :0054deca 012b5315 4ccfc945 0000008f 50a0f1e8 009db42c
41d6f8e8 :00000000 012b5258 4ccfcb33 012b5315 0000008f 012b5258
41d6f900 :4ccfca44 012b525d 00000000 009b9ba8 41d6f918 41b823f8
41d6f918 :4ccfc980 00553ff5 ffffffff 00000010 00000000 41d6f9e4
41d6f930 :4d1126e8 009b9c34 41d6fa48 41d6f978 009b9c34 437faab0
41d6f948 :fffffffe 00000002 fffffffe 00000000 41d6f978 00570b50
41d6f960 :00000000 009b9ba8 00090000 009b9c34 00000001 7c8302e7
41d6f978 :00000000 00570b50 fffffff8 00000001 0000008f 0000008c
41d6f990 :437faaf0 00000000 00000000 00000000 00000000 41d6f918
41d6f9a8 :41b823c0 ffffffff 437f9fc0 437faab0 009b9c34 4ccfc980
41d6f9c0 :0000008f 41d6f918 00000001 00000001 00000010 00000000
41d6f9d8 :00000000 41d6f918 009b9c34 009b9ba8 00533bb1 009b9c34
41d6f9f0 :50a0f1b8 4d1126e8 00000000 41d6fa44 005539c0 41d6fa48
41d6fa08 :009b9ba8 437f9fc0 41d6fa50 009b9c34 0059065c 50a0f1b8
41d6fa20 :00535583 009b9c34 437faab0 00000000 41d6fa44 005539c0
41d6fa38 :00000001 41d6fa48 00533729 41d6fa68 00000000 00000000
41d6fa50 :0000008f 00569db2 009b9c34 437f9fd4 437faab0 0000008f
41d6fa68 :009b9ba8 009b9c34 0000000f 00000002 00569ef7 0000008f
41d6fa80 :009b9ba8 0056a38d 009b9ba8 009b9ba8 41d6ff80 009b9ba8
41d6fa98 :7ffde000 009b9c34 41d6ff98 00525ca0 00572cf0 00000000
41d6fab0 :00000000 00000000 00000000 00000000 00000000 00000000
41d6fac8 :00000000 00000000 00000000 00000000 00000000 00000000
41d6fae0 :00030178 00000269 00000000 00000000 00000000 00000000
41d6faf8 :00000000 00000000 00000000 00000000 00000000 00000000
41d6fb10 :00000000 00000000 00000000 00000000 00000000 00000000
41d6fb28 :00000000 00000000 00037c28 00000000 00000000 00000000
41d6fb40 :00000000 00000013 00000000 00037c20 00030168 00000042
41d6fb58 :00037c20 00000013 00030178 00000000 00000098 00000000
41d6fb70 :00030000 009d6850 00000210 4100fbbc 00000098 4100f980
41d6fb88 :00380000 41d6f988 00000000 41d6fbd4 7c82f680 7c82fb28
41d6fba0 :ffffffff 7c82fb23 7c3423aa 771f123c 00000000 00000002
41d6fbb8 :771f0000 41d6fc10 00095e70 00000001 00000000 41d6fca8
41d6fbd0 :771f46c9 771f1240 ffffffff 771f123c 771f11e8 771f0000
41d6fbe8 :00000002 00000000 00000000 41d6fc10 00000001 41d6fc1c
41d6fc00 :7c82257a 771f0000 00000001 00000000 00000001 00000000
41d6fc18 :00097f98 00000001 00000000 41d6fcb8 7c81a81b 7c889d94
41d6fc30 :7c81b26f 00000000 7ffdc000 00000000 00000000 00000000
41d6fc48 :00000000 00000000 00000000 00000000 00000000 00000000
41d6fc60 :00000000 00000024 00000001 00000000 00000000 00000070
41d6fc78 :ffffffff ffffffff 7c81a7dc 7c81a7a4 00000000 00000000
41d6fc90 :00097f98 771f11a0 00000418 000000f5 009dc120 41d6fecc
41d6fca8 :7c82fda6 7c82fb23 0000040c 0000040c 009b9ba8 7c822054
41d6fcc0 :7c81b23f 41d6fd28 00000000 009dbad8 00000000 00000000
41d6fcd8 :00000000 00000000 00000000 00000000 00000000 00000000
41d6fcf0 :00000000 00000000 00000000 41d6fcc4 00000000 41d6fff4
41d6fd08 :7c82f680 009dc530 ffffffff 7c81b23f 7c8211b4 0000000c
41d6fd20 :41d6fd28 00000001 00010017 00000000 00000000 00380178
41d6fd38 :00000000 00000000 00000000 00000005 f7547000 0000010d
41d6fd50 :000007ff 00000001 624e4d43 00000060 ae19faa4 009dc120
41d6fd68 :e4d11360 e24e4d43 00000005 0000000e e310e008 ffffffff
41d6fd80 :3b9aca07 e33dd7e8 3b9aca07 3b9aca07 00380178 1a30eb0a
41d6fd98 :009dc538 8093d69b 009d99e8 00000000 00380178 c0000034
41d6fdb0 :808ad480 00000000 00000038 009d99f0 00000023 00000000
41d6fdc8 :00000000 009dbad8 00000000 00000000 0056f660 00000000
41d6fde0 :77e6b5f3 0000001b 00000200 41d6fffc 00000023 00000698
41d6fdf8 :0000076a e47bbbf0 00000090 00000006 00000005 f7547000
41d6fe10 :ae19fbd4 e131ec08 ae19fbd8 d3f0fe22 d3f0fe22 000000f5
41d6fe28 :8093cb16 e131ec08 e105bf1c 00000025 ae19fbd0 009d99f0
41d6fe40 :e105bfb0 ae19fbd4 8093cb6e 3b9aca07 e131ec08 8083a8f5
41d6fe58 :00000000 00000000 80a78be3 badb0d00 80010031 00000005
41d6fe70 :009dc120 00000005 c0502000 009dccd8 77ce8221 00000083
41d6fe88 :00000000 009dc118 ae19fba8 00000418 009dc118 009dc120
41d6fea0 :00380178 00000001 00000418 0000ad58 00380000 41d6fcb0
41d6feb8 :f772fa00 41d6fefc 7c82f680 7c82fb28 ffffffff 7c82fb23
41d6fed0 :7c3416b3 00380000 00000000 7c3416b8 0000040c 00000000
41d6fee8 :009b9ba8 ffffffff 41d6ff3c 41d6fee0 41d6ff40 41d6ff98
41d6ff00 :7c34240d 7c37a2a8 ffffffff 7c3416b8 7c3416db 0000040c
41d6ff18 :7c3416f8 0000040c 00000000 00504b4d 0000040c 0107e577
41d6ff30 :41d6ff6c 0057de91 009b9ba8 009b9ba8 00003000 00000140
41d6ff48 :41d6ff64 41d6ffa0 0056f1f9 41c70000 00003000 009b9ba8
41d6ff60 :009db8b0 009b9ba8 0056e9c2 7c821dd4 009b9ba8 009b9ba8
41d6ff78 :009b9ba8 00572ce9 41d6ffa0 00572ded 77e6eccd 009dbad8
41d6ff90 :009dbad8 7ffde000 41d6ffdc 00525ca0 41d6ffec 0056f6c7
41d6ffa8 :009b9ba8 00000000 00000000 00000740 009dbaf4 77e6608b
41d6ffc0 :00000740 00000000 00000000 009dbad8 c9792963 41d6ffc4
41d6ffd8 :000d4193 ffffffff 77e6b7d0 77e66098 00000000 00000000
Code:
41eafd45 :00000000 00000000 00000000 00000000 00000000 00000000
41eafd5d :00000000 00000000 ff4e4be0 00ffffff 007ffdc0 00000000
41eafd75 :34001590 0041eafd 98000000 d041eaff 0077e6b7 0077e6bb
41eafd8d :a4000000 4241eafd 2877e6ba ff000007 00ffffff 68000000
41eafda5 :0c41d6f8 280056e6 ff000007 0fffffff 48001d1a 8000aece
41eafdbd :00006093 987ffda0 c0005710 98004fe0 38009da3 0041eafe
41eafdd5 :40000000 9841eafe f8009da3 0001c83c e0000000 0001c83c
41eafded :17000000 80004f66 38006093 3841eafe 2041eafe 00f7c4ca
41eafe05 :da7ffda0 20004f20 c0f7c4ca 00004fe0 00000000 b5000000
41eafe1d :98004f2e 98009da3 00009da3 9841eaff 58009da3 00303fe0
41eafe35 :00000000 50000000 0000570b 98000000 00009da3 00000000
41eafe4d :80000000 f5006093 388083a8 5041eafe 0000570b 98000000
41eafe65 :31009da3 00800100 60000000 00005c0e 58000000 5041eafe
41eafe7d :0000570b 98000000 00009da3 00000000 d0000000 00005c0e
41eafe95 :31000000 00800100 00000000 00000000 ff000000 00ffffff
41eafead :00000000 cc000000 0080a78b e0f7757a 78adbbab 5041eafe
41eafec5 :0000570b 98000000 b7009da3 608083e6 2888736a 90005c0e
41eafedd :7888736a 5041eafe 0000570b 98000000 3c009da3 0041eaff
41eafef5 :20000000 00005c0f 80000010 f041eaff 0000572c 84000000
41eaff0d :917c8218 ff77e41a 3cffffff 4041eaff 4041eaff 64000001
41eaff25 :f041eaff 6c009de2 2d41eaff 0600540a 98000000 f0009da3
41eaff3d :00009de2 40000030 64000001 a041eaff f941eaff 000056f1
Loaded modules:
(* denotes the module causing the exception)
0x7c800000-0x7c8bffff C:\WINDOWS\system32\ntdll.dll
0x77e40000-0x77f41fff C:\WINDOWS\system32\kernel32.dll
0x77f50000-0x77febfff C:\WINDOWS\system32\ADVAPI32.dll
0x77c50000-0x77ceefff C:\WINDOWS\system32\RPCRT4.dll
0x77ba0000-0x77bf9fff C:\WINDOWS\system32\MSVCRT.dll
0x00410000-0x0061afff d:\web\bea\jrockit81sp5_142_08\jre\bin\jrockit\jvm.dll
0x76aa0000-0x76accfff C:\WINDOWS\system32\WINMM.dll
0x77c00000-0x77c47fff C:\WINDOWS\system32\GDI32.dll
0x77380000-0x77411fff C:\WINDOWS\system32\USER32.dll
0x7c8d0000-0x7d0d3fff C:\WINDOWS\system32\SHELL32.dll
0x77da0000-0x77df1fff C:\WINDOWS\system32\SHLWAPI.dll
0x71c00000-0x71c16fff C:\WINDOWS\system32\WS2_32.dll
0x71bf0000-0x71bf7fff C:\WINDOWS\system32\WS2HELP.dll
0x7c340000-0x7c395fff C:\WINDOWS\system32\MSVCR71.dll
0x71bc0000-0x71bc7fff C:\WINDOWS\system32\rdpsnd.dll
0x771f0000-0x77200fff C:\WINDOWS\system32\WINSTA.dll
0x71c40000-0x71c97fff C:\WINDOWS\system32\NETAPI32.dll
0x76b70000-0x76b7afff C:\WINDOWS\system32\PSAPI.DLL
0x77420000-0x77522fff C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.3790.2778_x-ww_A8F04F11\comctl32.dll
0x76f50000-0x76f62fff C:\WINDOWS\system32\Secur32.dll
0x00b30000-0x00b48fff d:\web\bea\jrockit81sp5_142_08\jre\bin\java.dll
0x00b50000-0x00b5dfff d:\web\bea\jrockit81sp5_142_08\jre\bin\verify.dll
0x71b20000-0x71b60fff C:\WINDOWS\System32\mswsock.dll
0x76ed0000-0x76efefff C:\WINDOWS\system32\DNSAPI.dll
0x76f80000-0x76f87fff C:\WINDOWS\system32\rasadhlp.dll
0x42c30000-0x42c34fff D:\web\bea\weblogic81\server\bin\wlntio.dll
0x68000000-0x6802efff C:\WINDOWS\system32\rsaenh.dll
0x00a90000-0x00a95fff D:\web\bea\jrockit81sp5_142_08\jre\bin\ioser12.dll
0x02800000-0x028c0fff d:\web\bea\jrockit81sp5_142_08\jre\bin\dbghelp.dll
0x77b90000-0x77b97fff C:\WINDOWS\system32\VERSION.dll
Java Thread ID = 0x00000100, lastJavaFrame = 0x41D6F8E0, Name = (Signal Handler)
Thread Stack Trace:
at _vmShutdown+225()@0x004E91E1
at java/lang/Shutdown.halt(Native Method)@0x4CCFC910
at java/lang/Shutdown.exit(Unknown Source)@0x4CCFCA44

You would need to get BEA support, after verifying you are on a supported configuration (http://edocs.bea.com/jrockit/jrdocs/suppPlat/supp_142.html).
Otherwise you may need to try update 10, or use Sun JVM.

(error code = 200; message="Java error"; exception = [java.lang.Exception])

Hi, I have several times tried to install ABAP Trial, but failed.
So I need your help.
As soon as I set up XP, I download and install the newest Java, then started installation of ABAP Trial.
But at the end I just get an error message as belows.
I hope you will guide me correct direction.
Thanks for reading & Have a good day!
(Jul 11, 2008 7:38:06 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Jul 11, 2008 7:38:06 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
(Jul 11, 2008 7:43:08 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Jul 11, 2008 7:43:08 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Hi YUN SEOK,
I got the same error than you when I tried to install SAP NetWeaver ABAP Trial Version.
Could you help me in giving exactly the link you wrote.
https://www.sdn.sap.com/irj
Where is located exactly the answer ?
I looked at this link but I did not find the answer.
So could you give me exactly the location in this link ?
Thanks in advance.
STD,

Page Fault Processor Exception (Error code 00000004) GWIA

About every 24 - 36 hours GWIA aneds and unload GWIA from its address
space
Running 8.01 (with patches) on NW65 sp8 (with patches)
Novell Open Enterprise Server, NetWare 6.5
PVER: 6.50.08
Address space GWIA removed Monday, April 12, 2010 11:53:27.355 am
Abend 0 on P00: Server-5.70.08: Page Fault Processor Exception (Error
code 00000004)
Registers:
CS = 001B DS = 0023 ES = 0023 FS = 0023 GS = 0023 SS = 0023
EAX = 00000000 EBX = CA56C50C ECX = CA56C50C EDX = CA5CA998
ESI = CA5CA998 EDI = CA56C1EC EBP = CA56C4C8 ESP = CA56BBF8
EIP = F530E65E FLAGS = 00010246
F530E65E 66AD LODSW
EIP in LIBC.NLM at code start +0009465Eh
Access Location: 0xCA5CA998
The violation occurred while processing the following instruction:
F530E65E 66AD LODSW
F530E660 84C0 TEST AL, AL
F530E662 7503 JNZ F530E667
F530E664 AA STOSB
F530E665 EB06 JMP F530E66D
F530E667 66AB STOSW
F530E669 84E4 TEST AH, AH
F530E66B 75F1 JNZ F530E65E
F530E66D 8B44240C MOV EAX, [ESP+0C]
F530E671 5E POP ESI
Running process: Server 00:35 Process
Thread Owned by NLM: SERVER.NLM
Stack pointer: CA56BBF8
User Space Stack limit: 0
Scheduling priority: 67371008
Wait state: 50500F0 Waiting for work
Stack: --CA2F5820 ?
--C0E5BC80 ?
F44B6290 (GWIA.NLM|ImapEngineCallback+9BC)
--CA56C1EC ?
--CA5CA998 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--CA5CA8B0 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--C8FE5EC0 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--CA56C50C ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--C1D45DC0 ?
--C9BF50C0 ?
--C9BF50C0 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
Additional Information:
The CPU encountered a problem executing code in LIBC.NLM. The
problem may be in that module or in data passed to that module by a
process owned by SERVER.NLM.

that's all that's in the ABEND log .... for each of the times that the
GWIA unlaods
The system doesn't actually abend - it just unloads the GWIA from the
protected memeory space
ataubman wrote:
>
> You haven't given us the modules list so we can't see what versions
> you have. This problem should be fixed in GW 8 SP1 HP1.

Page Fault Processor Exception (Error code 00000002)

We have begun to experieince the following abend on our Netware 6.5 server running GroupWise 8.
Novell Open Enterprise Server, NetWare 6.5
PVER: 6.50.08
Server halted Wednesday, December 8, 2010 8:08:15.459 am
Abend 1 on P02: Server-5.70.08: Page Fault Processor Exception (Error code 00000002)
Registers:
CS = 0008 DS = 0023 ES = 0023 FS = 0023 GS = 0023 SS = 0010
EAX = 78DBF1DC EBX = 6D86C060 ECX = 00446A97 EDX = FCAEF520
ESI = 6FF57EE0 EDI = 7B4AB000 EBP = A067C9A0 ESP = A197F668
EIP = 8038B5D8 FLAGS = 00010202
8038B5D8 F2A5 **REPNE* MOVSD
EIP in LIBC.NLM at code start +000945D8h
Access Location: 0x7B4AB000
The violation occurred while processing the following instruction:
8038B5D8 F2A5 **REPNE* MOVSD
8038B5DA 2403 AND AL, 03
8038B5DC 8AC8 MOV CL, AL
8038B5DE F2A4 **REPNE* MOVSB
8038B5E0 8B44240C MOV EAX, [ESP+0C]
8038B5E4 5E POP ESI
8038B5E5 5F POP EDI
8038B5E6 C3 RET
LIBC.NLM|memcmp:
8038B5E7 57 PUSH EDI
8038B5E8 56 PUSH ESI
Running process: GWIMAP-BCC_-Handler_2 Process
Thread Owned by NLM: GWPOA.NLM
Stack pointer: A197F418
OS Stack limit: A19711C0
Scheduling priority: 67371008
Wait state: 3030070 Yielded CPU
Stack: --038068DC ?
--78DBF180 ?
90246CD4 (THREADS.NLM|realloc+B8)
--78DBF180 ?
--6D86C060 ?
--038068DC ?
--03806900 ?
--00000001 (LOADER.NLM|KernelAddressSpace+1)
--038068DC ?
--A197F6A8 ?
--00000100 (LOADER.NLM|KernelAddressSpace+100)
--475BE354 ?
A046BF23 (GWENN5.NLM|GWENN5@_WpmemRealloc+13)
--6D86C060 ?
--03806900 ?
--475BE340 ?
--A197F6C4 ?
A045F6BA (GWENN5.NLM|GWENN5@?GetHandle%NgwBufIStream%%QAEKP APAX%Z+2BA)
--03806900 ?
--475BE354 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
-9AD5EF0C (GWENN5.NLM|GWENN5@??_7NgwBufIStream%%6B%+8)
--4C60D600 ?
--A197F6F4 ?
9FC3E61B ?
--4E457B00 ?
--00001FFC (LOADER.NLM|KernelAddressSpace+1FFC)
--A197F6DC ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00001FFC (LOADER.NLM|KernelAddressSpace+1FFC)
9FBBAD00 ?
--44DC2080 ?
--4C60D600 ?
--44DC2080 ?
--A197F980 ?
--A197F704 ?
9FC3E425 ?
--475BE340 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--A197F71C ?
9FC2EBAD ?
--475BE340 ?
-9F31FACD ?
-9F31F957 ?
--A197F980 ?
--A197F73C ?
9FBBA181 ?
--44DC2500 ?
--00000002 (LOADER.NLM|KernelAddressSpace+2)
--0006F734 ?
--44DC2500 ?
-9F31F957 ?
--A197F980 ?
--A197F750 ?
9FBBB830 ?
--44DC2500 ?
--A197F980 ?
-9F31F957 ?
--A197F764 ?
9FBBA640 ?
--44DC2500 ?
-9F31F957 ?
--A197F980 ?
--A197F78C ?
9FBBA5B5 ?
--44DC2500 ?
--A197F78C ?
--B18F2280 ?
--B18F2320 ?
--439CE400 ?
-9F31FAF9 ?
-9F31F957 ?
--A197F980 ?
--A197F7AC ?
9FBBA143 ?
--44DC2400 ?
--A197F980 ?
--0008EBC0 ?
--44DC2840 ?
-9F31F957 ?
--A197F980 ?
--A197F7C4 ?
9FBBA6EE ?
--475BEBC0 ?
--4B23E4C0 ?
--A197F980 ?
-9F31F957 ?
--A197F7D8 ?
9FBBA024 ?
--475BEBC0 ?
-9F31F957 ?
--4B8595AE ?
--A197F9DC ?
9FB85D78 ?
--44DC2300 ?
--00000067 (LOADER.NLM|KernelAddressSpace+67)
--B18F2F60 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--4B859F60 ?
Additional Information:
The CPU encountered a problem executing code in LIBC.NLM. The problem may be in that module or in data passed to that module by a process owned by GWPOA.NLM.
Emulated 5000 and found no RET instruction
Function may never return.
We are running GW 8 SP 1 on a Netware 6.5 SP 8 OS. I truncated due to character limit.
Any help would be greatly appreciated.

Originally Posted by utman
My guess is that it is a problem in the GWIN code. Is SP 1 the latest? Usually when the code dies in libc it isn't really libc but the function that called libc.
We just downloaded SP 2 (fairly new support pack) and some subsequent Hotfixes for SP 2. We will be loading those tonight.
Thanks for your response.

How to obtain error codes from LDAP exceptions

Is there a way to obtain the error codes returned by LDAP services. In our application, we want to give more understandable messages and solution to rectify the issues, for the exception thrown while accessing LDAP. The NamingException does not contain error codes. Is there a way to obtain the error codes? If not, is there a neat way to handle this?
Thanks in advance
Sankar
Edited by: sansun08 on Nov 14, 2009 9:40 AM

Huh?
If it says ignore duplicate keys then that would suggest to me that it isn't an error. If there is no error, then you won't get an error.
So if you want an error then either remove the ignore or explicitly do a query first and create your own error if the id is already there.

Exception deployer error codes

Similar Messages

Maybe you are looking for