Exception of average values

Hi all
I have a problem with an exception which is defined in BEx Analyser.
The key figure is a valeue in percentage an defined as "Average of all Values <> 0". I have defined to show values >50% in green, but in the query some values (not all) which are >50% (e.g. 83%) are not marked in green, and some values are marked correct.
In other queries, where the same key figure is used but as single values where "calculate result as..." is not defined, the exeption works correct. Just when using the average values it makes the problem.
Any ideas?
Regards
Sabine

I don't clearly understand the behaviour of BW.Have you tried Formula Collision? If Exception is treated as a formula internally then there may be a collision between Average and Exception.
Formula collision may help Average to take precedence and then it may force the Exception to get it applied.
Sorry Sabine I don't have data to test and I never come across so don't think I am putting u in a loop.
Regs
Gopi.

Similar Messages

Exception Aggregation (Average of all values 0) - Non cumulative KF

Hi Experts,
I am using the Exception Aggregation (Average of all values <> 0) on a Non Cumulative KF. Most of the times i am not getting the desired results but some times it gives me the desired result.
my doubt is whether we can use Exception Aggregation on Non cumulatives?????
Thanks for any help
boobal

Hi,
Non-cumulative valuesare those key figures that are measured in relation to a period in time; that is to say they cannot be meaningfully cumulated over time. Non-cumulative values are summarized over time using so-called exception aggregation.
Example:stock quantities/-values, number of employees, account balances, etc.
Please check this document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d61b1e95-0501-0010-dfbe-a03970712ef1
Hope this helps.
Regards,
Mona
Edited by: Mona Kapur on Jan 17, 2008 10:45 AM

Exception aggregation 'Average of all values'

Hi,
What is Exception aggregation 'Average of all values' wrt a reference characteristic. an how do I use it in Bex?
-Simmi

hi,
it determines how the key figure is aggregated in the BEx in relation to the exception characteristic, in your case it's averaged for all values.
another case sample maybe you need to report stock, which should not accumulated, but the last value, then you can choose 'last value', with reference chacarteristic to certain time characteristic.
you may also use it for 'calculated key figure' in BEx to get average value.
http://help.sap.com/saphelp_nw04s/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/6f/56853c08c7aa11e10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/76563cc368b60fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.htm

Exception Aggregation (Average) displaying incorrect values after EHP1 Upgr

Hi All,
Exception Aggregation (Average) displaying incorrect values after EHP1 Upgrade in our BW system
We have recently upgraded the system to EHP1. After the upgrade some of the queries where we are using Exception Aggregation (Average) started giving the incorrect values.
Eg. We are displaying three Key Figures KF1, KF2 and KF3 (=KF1 %A KF2) against Store Hierarchy. In KF3 we are using Exception Aggregation (Average) on a characteristic 0PLANT.
There are 14 rows against 0PLANT and out of those 2 rows are blank for KF1, so for KF3. When it is calculating the average of these key figures its dividing the total value by 12 instead of 14 which is not correct in our case. Earlier it was dividing the total by 14.
So in this case 'Average' and "Average of all values <>0" are behaving the same way.
Kindly provide some inputs on this.
Best Regards,
Sachin Verma
+44 7506740018

Hi,
Thanks for viewing the thread. And happy to let you know that the issue was resolved.
The solution was:
Two formulas (local) were created, one including the formula variable with replacement path for ZD1, with exception aggregation on ZD1, and the other with formula variable with replacement path for ZD2, with exception aggregation on ZD2. Both these formulas are hidden.
Another formula (local) was created for u2018time takenu2019 = formula with ZD1 u2013 formula with ZD2, with exception aggregation total on u2018ZDOCNOu2019.
For the second instance, when one requires exception aggregation on records that has multiple values for keys, a nesting of formulas can be done displaying only the ones required.
For e.g. a formula with exception aggregation on say characteristic u2018item no.u2019 can be hidden, and included in another formula for exception aggregation on characteristic u2018document no.u2019. This is a typical case where one can achieve calculation before aggregation for a calculated key figure, formula or a counter.
Hope it might help someone, and saves time and effort for a similar issue posted.
Also would like to keep this thread open for exploring better solutions.
Regards,
Vijay

To display average value in a graph

Hi There,
In one graph I need to display the duration for each week as per the week range selected and a separate average duration value of the weeks selected.
Is it possible to develop a query for above average value and use this query in WAD?
Can anybody help in providing a solution
Thank you
Anima

BI Query data can be fed directly to WAD Charts.
See below.
http://help.sap.com/saphelp_nw04/helpdata/en/0c/95c83956852b51e10000000a114084/content.htm

Too many decimals in Average value

Hi
I am using Report Builder and the wizard do design a table which i deploy as a .jsp page.
For some columns in the table I select to display the average values. Some of the values looks fine with one decimal as i want, but some values is displayed with a lot of decimals (about 10) as 164,346666666666666666. I have tried to change the length but without effect. Are there any possibility to decide the number of digits to be shown in the report . Or is i it a bug in Report Builder.

Go to Property Inspector of the field and choose the right "Format Mask".

Crystal Runtime exception: Missing parameter values

Our company did a PeopleTools upgrade at one of our clients recently. We upgraded them to PeopleTools 8.50.08. We had to convert all the Crystal Reports to the 2008 format using the RPT converter which is included in the Client install of PeopleTools.
The only problem now is that a lot of the Crystal processes in PeopleSoft are failing with the following error:
Crystal Runtime exception: Missing parameter values.
I've checked the parameters which are being passed to the report and I see both parameters are filled:
E:\HR881\BIN\CLIENT\WINX86\PSCRRUN.EXE -CTORACLE -CDHRMKPDEV -COPSDUT -CPOPRPSWD -I218609 -RP"PUP202K" -OT6 -OP"G:\PS\PSPRCS\log_output\HRMKPDEV\CRW_PUP202K_218609" -LGDUT -OF2 -ORIENTL "2000-10-01" "2002-06-30"
Database type is Oracle. HRMS version is 8.8. I can run the Query which gets the data in just fine and I can also run the report from Crystal fine. This only happens with Crystal reports which have a date field as a parameter/prompt in the report.
There's currently an SR open at Oracle, but I was hoping that someone here can help me nail this issue. I'm not too happy with the quallity of Oracle support, but that's a whole different story.

<s>Just to be sure, did you put a space after each parameter name or is it a typo over here ?
E:\HR881\BIN\CLIENT\WINX86\PSCRRUN.EXE -CT ORACLE -CD HRMKPDEV -CO PSDUT -CP OPRPSWD -I 218609 -RP "PUP202K" -OT 6 -OP "G:\PS\PSPRCS\log_output\HRMKPDEV\CRW_PUP202K_218609" -LG DUT -OF 2 -OR IENTL "2000-10-01" "2002-06-30"</s>
Nicolas.
sorry, it was wrong assumption.
Edited by: N Gasparotto on Jun 2, 2010 5:11 PM

Creating function to calculate average value

Hi,
The below query was successfully return an average value. It returned 1 row.
SELECT AVG(Volume)
FROM security
WHERE
Type = 'Future' AND
Rating = 'AAA' AND
Code = 1 AND
(Day = ''14-mar-09' OR
Day = '16-mar-09' OR
Day = '');
I tried to use that function on my created function below.
CREATE OR REPLACE FUNCTION fn_Vol_Average
( v_DayLast_1_Week IN DATE,
v_DayLast_2_Week IN DATE,
v_DayLast_3_Week IN DATE )
RETURN NUMBER IS
v_Vol_Average NUMBER;
BEGIN
SELECT AVG(Volume) INTO v_Vol_Average
FROM security
WHERE
Type = 'Future' AND
Rating = 'AAA' AND
Code = 1 AND
(Day = v_DayLast_1_Week OR
Day = v_DayLast_2_Week OR
Day = v_DayLast_3_Week);
RETURN NVL(v_Vol_Average, NULL);
END;
I called that function by the following query. it was work, however it return the whole rows. It looks like the function perform the average calculation of each rows on the table.
Can anyone help me what is going on with the logic?
select fn_Vol_average('14-mar-09','16-mar-09','')
from security
--

But since your function calculates the average over the whole security table, you wouldn't call this from a select statement which also reads the security table.
You just want to execute it once.
declare
   l_vol_average number;
begin
   l_vol_average := fn_Vol_average('14-mar-09','16-mar-09','');
   dbms_output.put_line(l_vol_average);
end;By the way, be careful with your date parameters. You should use TO_DATE with a proper format mask to prevent conversion errors.

Exception setting property value with CGLIB ( in hibernate)

My hbm.xml file is:
<hibernate-mapping>
<class name="com.dst.fourx.model.codeModel.CodeGroupDisplay" table="CODE_GROUP_DISPAY1">
<composite-id name="codeGroupDisplayKey" class="com.dst.fourx.model.codeModel.CodeGroupDisplayKey">
<key-property name="nlsLanguage" type="java.lang.String" column="LANG_CD" />
<key-many-to-one name="codeGroupCode" class="com.dst.fourx.model.codeModel.CodesGroup" column="CD_GRP_CD" />
</composite-id>
<property name="createDate" column="CREATE_DT" type="java.util.Date" not-null="true"/>
<property name="createUserCode" column="CREATE_USER_CD" type="java.lang.String" not-null="true"/>
<property name="updateDate" column="LAST_MOD_DT" type="java.util.Date"/>
<property name="updateUserCode" column="LAST_MOD_USER_CD" type="java.lang.String"/>
<property name="displayText" column="DISPLAY_TXT" type="java.lang.String" not-null="true"/>
</class>
<query name="findAllEditableCodeGroups">
<![CDATA[from CodeGroupDisplay]]>
     </query>
</hibernate-mapping>
I m getting the following error while running the above query:
org.hibernate.PropertyAccessException: exception setting property value with CGLIB (set hibernate.cglib.use_reflection_optimizer=false for more info) setter of com.dst.fourx.model.codeModel.CodeGroupDisplayKey.setCodeGroupCode
     at org.hibernate.tuple.PojoComponentTuplizer.setPropertyValues(PojoComponentTuplizer.java:63)
     at org.hibernate.type.ComponentType.setPropertyValues(ComponentType.java:262)
     at org.hibernate.type.ComponentType.resolve(ComponentType.java:447)
     at org.hibernate.type.ComponentType.nullSafeGet(ComponentType.java:182)
     at org.hibernate.loader.Loader.getKeyFromResultSet(Loader.java:759)
     at org.hibernate.loader.Loader.getRowFromResultSet(Loader.java:292)
     at org.hibernate.loader.Loader.doQuery(Loader.java:412)
     at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:218)
     at org.hibernate.loader.Loader.doList(Loader.java:1593)
     at org.hibernate.loader.Loader.list(Loader.java:1577)
     at org.hibernate.loader.hql.QueryLoader.list(QueryLoader.java:395)
     at org.hibernate.hql.ast.QueryTranslatorImpl.list(QueryTranslatorImpl.java:271)
     at org.hibernate.impl.SessionImpl.list(SessionImpl.java:844)
     at org.hibernate.impl.QueryImpl.list(QueryImpl.java:74)
     at com.dst.fourx.core.impl.ao.dao.actions.HibernateNamedQueryAction.execute(HibernateNamedQueryAction.java:79)
     at com.dst.fourx.core.impl.ao.dao.BaseDAOHibernate.execute(BaseDAOHibernate.java:129)
     at com.dst.fourx.core.impl.ao.dao.AddEditCodeDAO.getAllFundingTypes(AddEditCodeDAO.java:47)
     at com.dst.fourx.core.impl.ao.dao.AddEditDAOTest.testGetCreditBankAccts(AddEditDAOTest.java:29)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at junit.framework.TestCase.runTest(TestCase.java:154)
     at junit.framework.TestCase.runBare(TestCase.java:127)
     at junit.framework.TestResult$1.protect(TestResult.java:106)
     at junit.framework.TestResult.runProtected(TestResult.java:124)
     at junit.framework.TestResult.run(TestResult.java:109)
     at junit.framework.TestCase.run(TestCase.java:118)
     at junit.framework.TestSuite.runTest(TestSuite.java:208)
     at junit.framework.TestSuite.run(TestSuite.java:203)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:478)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:344)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)
Caused by: net.sf.cglib.beans.BulkBeanException: com.dst.fourx.model.codeModel.CodesGroup$$EnhancerByCGLIB$$fd9c7e4e
     at com.dst.fourx.model.codeModel.CodeGroupDisplayKey$$BulkBeanByCGLIB$$ae2c0401_2.setPropertyValues(<generated>)
     at org.hibernate.tuple.PojoComponentTuplizer.setPropertyValues(PojoComponentTuplizer.java:59)
     ... 32 more
Caused by: java.lang.ClassCastException: com.dst.fourx.model.codeModel.CodesGroup$$EnhancerByCGLIB$$fd9c7e4e
     ... 34 more

check the setter method for the property LANG_CD in com.dst.fourx.model.codeModel.CodeGroupDisplay.
it must be like -
setNlsLanguage(CodesGroup xyz) { ... }
The paremeters must be objects, not the type of the database column. We can specify the actual field in CodesGroup which acts as the foreign key in CodeGroupDisplay in the "property-ref" attribute of <many-to-one> element in the mapping file for CodeGroupDisplay.
This worked for me. Hope it works for you too.

Display of "Average Values Text in ALV grid"

Hi
    I use ALV grid to display the fields from a table. I have 15 columns. I need to do average for four columns.
In the field catalog i did a do_sum for those fields.
   When the ALV grid is displayed I get average values for these columns.
Eg. Let suppose the grid looks like
Field1           Field2           Field3             Field4     Field5         Field 6.
vendor1       18                 22                   6            17                28
vendor1       54                 11                  16           62                28
vendor1       33                 21                   26          79                18
                    35             18                 16        52             24
My requirement is I need to display the text "AVERAGE VALUES" . ( I need something like this.)
Field1                      Field2           Field3             Field4     Field5         Field 6.
vendor1                   18                 22                   6            17                28
vendor1                    54                 11                  16           62                28
vendor1                    33                 21                  26          79                18
Average values        35             18                16        52             24
Could someone help me in this?
Thanks & Regards
Kavitha

Hello,
you can use event subtotal_text of ALV_GRID.
Regards,
Pedro Santos

Calculate Average value based on Day ??

Hello,
I am trying to calculate the Average value based on a day. The data is presented as follows...
Day          SOCount
Mon                34
Mon                 56
Mon                 67
Tues               24
Tues               25
Tues               23
Weds              45
Weds              69
The issue im having is that the Day column needs to be grouped first and the SOCount sumed together. Then the Average SO Count needs to be calculate based on this.
Thanks

Thanks for the reply,
The solution you have provided only gives me the average of the count of the SO Count, not the actual average of all the values added together then divided by the count..
The report i am creating only has charts in it. So i am trying to create a chart showing the
Average Sale Order Value by day.
I should have metioned this from the start, sorry.
Is it possible to do ?
Edited by: davitali on Nov 4, 2011 6:32 AM

Script logic to calculate average value on nodes - SAP BPC NW 10.0

Hi experts,
I need to have in the parent members of the dimension TIME (2014.Q1, 2014.Q2, 2014.Q3, 2014.Q4, 2014.TOTAL) the average value of their children and not the sum. For example :
2014.01 2014.02 2014.03 2014.Q1
1 2 3 2
2 = AVG(1, 2, 3)
I tried the script bellow but it doesn't work , it throws the error " ReferenceError : AVG is not defined"
*SELECT(%TIMESET%,"[ID]",TIME,"[CALC]='Y'")
*XDIM_MEMBERSET TIME = %TIMESET%
*XDIM_MEMBERSET MEASURES = PERIODIC
*WHEN DIM1
*IS C02
*WHEN TIME
*IS %TIMESET%
*REC(EXPRESSION = AVG(Descendants([%TIMESET%].CURRENTMEMBER)), TIME = %TIMESET%)
*ENDWHEN
*ENDWHEN
*COMMIT
How can I achieve this ?
Thanks
Maha

The best way is to enter 2 accounts: Productivity and Area, calculating by dimension member formula:
ProductivityPerHectare=IIF([Area]=0,NULL,[Productivity]/[Area])
If you have to enter ProductivityPerHectare and Area, then in script you can calculate Productivity:
*WHEN ACCOUNT
*IS Area
*REC(EXPRESSION=%VALUE%*[ACCOUNT].[ProductivityPerHectare],ACCOUNT=Productivity)
*ENDWHEN
*WHEN ACCOUNT
*IS ProductivityPerHectare //user input
*REC(EXPRESSION=%VALUE%*[ACCOUNT].[Area],ACCOUNT=Productivity)
*ENDWHEN
Then dimension member formula:
ProductivityPerHectareCalc=IIF([Area]=0,NULL,[Productivity]/[Area])
You can use arithmetic average of ProductivityPerHectare only if Area is always constant.
In this case you can create some dummy account member DUMMY and fill it with 1:
*WHEN ACCOUNT
*IS ProductivityPerHectare //user input
*REC(EXPRESSION=1,ACCOUNT=DUMMY)
*ENDWHEN
Then dimension member formula:
ProductivityPerHectareCalc=IIF([DUMMY]=0,NULL,[ProductivityPerHectare]/[DUMMY])
Vadim

How to calculate average value?

Hi all,
I'm using Lumira 1.15. I'm doing some practices with the sample dataset BestRunCorp... I want to calculate the average value of gross margin which is grouped by lines so that I can use a line chart to show the difference between the gross margin value and average value.
How can I achieve this ?
Best regards,
Shuang

It looks like it calculates the average based on the dimension
See below:
If you take the "Best run" Excel file, sort by country, calculate the average in Excel, it matches Lumira's 4,056 (for Argentina)
I am not sure I follow your divide by 12 logic?

Calculate the average value

the data I measured changed rapidly, so i want get the average value of the data
Do not tell me to use mean.vi , i have already know that.
and i got an idea which is add the data into an array every time, then sum of all the data value and take the result divide by the number of elements
but i dont know how to achieve that, anyone can build a simple vi to show me ? thank you
i have attached my vi which is using mean.vi to calc the average value, you can delete it and using in your way , thank you !
Solved!
Go to Solution.
Attachments:
EN-new.vi ‏274 KB

Hi I got a similar issue for averaging. I used the mean.vi from the math function but the average is rolling when i run it. I am trying to calculate the average for the data i read to the RT FIFO (which is around 40000 lines).I got the writing part working, however, when i am reading the data, I couldn't get it working. I thought i read the data as a 1-D array, and then pass it to the Mean.vi and then got the result. But seems like the mean is only showing the last data in the array.
Can someone help me with this??
Attachments:
FPGA-vi.png ‏242 KB
RT-vi.png ‏182 KB
RT-2mod.vi ‏515 KB

Read-in CSV and Calculate Average Value

I've got a csv file which I'm reading in but need to calculate the average value of the second column (CPU). It's in the following format:
Date CPU
01/09/2014 25.3
02/09/2014 22.3
03/09/2014 26.2
04/09/2014 22.1
I basically need the average CPU for the month. Any advice?
Thanks in advance
Adam

"Date","CPU"
"01/09/2014","25.3"
"02/09/2014","22.3"
"03/09/2014","26.2"
"04/09/2014","22.1"
'@ | sc test.csv
(Import-Csv test.csv | measure CPU -Average).Average
23.975
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Exception of average values

Similar Messages

Maybe you are looking for