Exception Aggregation (Average) displaying incorrect values after EHP1 Upgr

Hi All,
Exception Aggregation (Average) displaying incorrect values after EHP1 Upgrade in our BW system
We have recently upgraded the system to EHP1. After the upgrade some of the queries where we are using Exception Aggregation (Average) started giving the incorrect values.
Eg. We are displaying three Key Figures KF1, KF2 and KF3 (=KF1 %A KF2) against Store Hierarchy. In KF3 we are using Exception Aggregation (Average) on a characteristic 0PLANT.
There are 14 rows against 0PLANT and out of those 2 rows are blank for KF1, so for KF3. When it is calculating the average of these key figures its dividing the total value by 12 instead of 14 which is not correct in our case. Earlier it was dividing the total by 14.
So in this case 'Average' and "Average of all values <>0" are behaving the same way.
Kindly provide some inputs on this.
Best Regards,
Sachin Verma
+44 7506740018

Hi,
Thanks for viewing the thread. And happy to let you know that the issue was resolved.
The solution was:
Two formulas (local) were created, one including the formula variable with replacement path for ZD1, with exception aggregation on ZD1, and the other with formula variable with replacement path for ZD2, with exception aggregation on ZD2. Both these formulas are hidden.
Another formula (local) was created for u2018time takenu2019 = formula with ZD1 u2013 formula with ZD2, with exception aggregation total on u2018ZDOCNOu2019.
For the second instance, when one requires exception aggregation on records that has multiple values for keys, a nesting of formulas can be done displaying only the ones required.
For e.g. a formula with exception aggregation on say characteristic u2018item no.u2019 can be hidden, and included in another formula for exception aggregation on characteristic u2018document no.u2019. This is a typical case where one can achieve calculation before aggregation for a calculated key figure, formula or a counter.
Hope it might help someone, and saves time and effort for a similar issue posted.
Also would like to keep this thread open for exploring better solutions.
Regards,
Vijay

Similar Messages

Exception Aggregation (Average of all values 0) - Non cumulative KF

Hi Experts,
I am using the Exception Aggregation (Average of all values <> 0) on a Non Cumulative KF. Most of the times i am not getting the desired results but some times it gives me the desired result.
my doubt is whether we can use Exception Aggregation on Non cumulatives?????
Thanks for any help
boobal

Hi,
Non-cumulative valuesare those key figures that are measured in relation to a period in time; that is to say they cannot be meaningfully cumulated over time. Non-cumulative values are summarized over time using so-called exception aggregation.
Example:stock quantities/-values, number of employees, account balances, etc.
Please check this document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d61b1e95-0501-0010-dfbe-a03970712ef1
Hope this helps.
Regards,
Mona
Edited by: Mona Kapur on Jan 17, 2008 10:45 AM

Exception aggregation 'Average of all values'

Hi,
What is Exception aggregation 'Average of all values' wrt a reference characteristic. an how do I use it in Bex?
-Simmi

hi,
it determines how the key figure is aggregated in the BEx in relation to the exception characteristic, in your case it's averaged for all values.
another case sample maybe you need to report stock, which should not accumulated, but the last value, then you can choose 'last value', with reference chacarteristic to certain time characteristic.
you may also use it for 'calculated key figure' in BEx to get average value.
http://help.sap.com/saphelp_nw04s/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/6f/56853c08c7aa11e10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/76563cc368b60fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.htm

JSF keeps displaying old values after Validation Phase fails

Hi all,
I would like to ask some help in understanding a particular behaviour that JSF shows when Validation Phase fails.
I'm using:
- Tomcat 7.0.2
- JSF 1.2_12
- RichFaces 3.3.3
Problem description.
I wrote a form with 4 input fields: an inputText and 3 selectOneMenu. The inputText is required while the selectOneMenus don't require any validation.
Attached to the first selectOneMenu (row 32), is an a4j:support tag so that, whenever the change event is fired, the list of items of the second
and the third selectOneMenu (row 44 and 58) are correctly filled (note that the mandatory of the inputText is ignored thanks to the ajaxSingle attribute).
In particular, after loading the two lists of items, the actionListener forces the value of the second and the third selectOneMenu to null.
This mechanism seems to work fine until I submit the whole form without filling the input text: as expected, JSF validation fails but if I change the value of
the first selectOneMenu again (causing a new submit), the page keeps displaying the values specified before JSF validation failed for the second and the third
selectOneMenu (note that the actionListener is still called and the values of the second and the third selectOneMenu are still forced to null).
Since I'm using a simple PhaseListener, I noticed the following: before JSF validation fails, every time I change the value of the first selectOneMenu, JSF life
cycle always calls the get method for the second and the third selectOneMenu during the Render Response Phase. In this way, JSF is able to "see" that
those values have been set to null during the Invoke Application Phase.
After validation fails, JSF stops calling those getters when I change the value of the first selectOneMenu.
I hope my explanation was clear enough, thanks a lot for your help.
Regards,
Nico
Web Page
<?xml version='1.0' encoding='UTF-8' ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
                      "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
      xmlns:f="http://java.sun.com/jsf/core"
      xmlns:h="http://java.sun.com/jsf/html"
      xmlns:a4j="http://richfaces.org/a4j"
      xmlns:rich="http://richfaces.org/rich">
<head>
<title>Prove Rich</title>
</head>
<body>
<h2>Prove Rich</h2>
<f:view>
<a4j:outputPanel ajaxRendered="true">
    <h:messages style="color:red" />
</a4j:outputPanel>
<h:form>
<p>
     Input required: <h:inputText value="#{provaProbReplyBean.inputRequired}" required="true" />
</p>
<p>
     <h:outputText value="Scegli il canale:" />
     <h:selectOneMenu value="#{provaProbReplyBean.canale}">
        <f:selectItem itemLabel="--" itemValue="" />
        <f:selectItem itemLabel="Profamily" itemValue="Profamily" />
        <f:selectItem itemLabel="Captive" itemValue="Captive" />
        <a4j:support event="onchange" action="#{provaProbReplyBean.caricaProcBanche}"
                              ajaxSingle="true" reRender="procedure, banche" />
     </h:selectOneMenu>
</p>
<p>
     <h:outputText value="Scegli la procedura:" />
     <h:selectOneMenu id="procedure" value="#{provaProbReplyBean.procedura}">
        <f:selectItem itemLabel="--" itemValue="" />
        <f:selectItems value="#{provaProbReplyBean.procedureList}" />
        
        <a4j:support event="onchange" ajaxSingle="true" />
     </h:selectOneMenu>
</p>
<p>
     <h:outputText value="Scegli la banca:" />
     <h:selectOneMenu id="banche" value="#{provaProbReplyBean.banca}">
        <f:selectItem itemLabel="--" itemValue="" />
        <f:selectItems value="#{provaProbReplyBean.bancheList}" />
        
        <a4j:support event="onchange" ajaxSingle="true" />
     </h:selectOneMenu>
</p>
<p><h:commandButton value="Submit" /></p>
</h:form>
</f:view>
</body>
</html>
Bean
public class ProvaProbReply {
     private String inputRequired;
     private String canale;
     private String procedura;
     private String banca;
     private Map<String, List<SelectItem>> canaliProc = new HashMap<String, List<SelectItem>>();
     private Map<String, List<SelectItem>> canaliBanche = new HashMap<String, List<SelectItem>>();
     private List<SelectItem> procedureList = new ArrayList<SelectItem>();
     private List<SelectItem> bancheList = new ArrayList<SelectItem>();
     public ProvaProbReply() {
          List<SelectItem> l = new ArrayList<SelectItem>();
          l.add(new SelectItem("Cessione del quinto"));
          l.add(new SelectItem("Credito al consumo"));
          l.add(new SelectItem("Mutui"));
          canaliProc.put("Profamily", l);
          l = new ArrayList<SelectItem>();
          l.add(new SelectItem("Credito al consumo"));
          canaliProc.put("Captive", l);
          l = new ArrayList<SelectItem>();
          canaliBanche.put("Profamily", l);
          l = new ArrayList<SelectItem>();
          l.add(new SelectItem("BDL"));
          l.add(new SelectItem("BM"));
          l.add(new SelectItem("BPM"));
          l.add(new SelectItem("CRA"));
          canaliBanche.put("Captive", l);
     public String getInputRequired() {
          return inputRequired;
     public void setInputRequired(String ir) {
          inputRequired = ir;
     public String getCanale() {
          return canale;
     public void setCanale(String c) {
          canale = c;
     public String getProcedura() {
          System.out.println("\ngetProcedura called\n");
          return procedura;
     public void setProcedura(String p) {
          procedura = p;
     public String getBanca() {
          System.out.println("\ngetBanca called\n");
          return banca;
     public void setBanca(String b) {
          banca = b;
     public List<SelectItem> getProcedureList() {
          return procedureList;
     public List<SelectItem> getBancheList() {
          return bancheList;
     public String caricaProcBanche() {
          System.out.println("\nListener called\n");
          procedureList.clear();
          bancheList.clear();
          if(canale != null && !canale.equals("")) {
               procedureList.addAll(canaliProc.get(canale));
               bancheList.addAll(canaliBanche.get(canale));
          System.out.println("BEFORE setting:\n");
          System.out.println("\nProcedura: "+procedura+"\n");
          System.out.println("Banca: "+banca+"\n");
          procedura = null;
          banca = null;
          System.out.println("\n\n\nAFTER setting:\n");
          System.out.println("\nProcedura: "+procedura+"\n");
          System.out.println("Banca: "+banca+"\n");
          return "";
}Edited by: 869000 on 28-giu-2011 14.05

I'm thinking this has to do with the fact that the UIComponents use the localValue after validation fails. This prevents the values from being overwritten when re-rendering the page, i.e. the inputs keep the value set by the user.
The solution is to manipulate the components directly during the AJAX request when the first pull down is changed. Use the binding attribute to place them into your bean and clear the value directly. That way it will not matter that the expression is not evaluated.

Table displays incorrect value in coverted PDF

I converted a microsoft word document to a PDF to send to a client, after converting the values within one of the tables are not displaying correctly.
In the table, every value is set to " !L2 Is Not In Table " is there a known solution to this?
Thank You

Hi,
You have to pass 'EKKO' and 'EKPO' i.e in caps to the exporting parameter I_STRUCTURE_NAME of the function module
'REUSE_ALV_FIELDCATALOG_MERGE'.
I think this would work, if not pls let me know.
Thanks,
Radhika

BEx Displays Wrong Values After Reloading InfoCube

I am very new to all of this, so there is a good chance I have just done something stupid. I have an InfoCube in which I deleted all of the data, and then reloaded it with corrected data from the PSA. If I look at the raw data in the InfoCube, it looks fine. If I run a query with either BEx Analyzer or BEx Web Analyzer, key figure data is doubled, as are the result rows. I believe it has to do caching for that particular Query, because I can create a new one and it will display the data correctly. Does anyone have any ideas what might be causing this to happen? Or how to clear out the cache?
Thanks

Well, by the time I got back to look at it, it was working fine. Which told me it was related to caching. So I decided to recreate it. In order to do this, I cleared out the request from the InfoCube, and then went and modified a few rows in the PSA. After the DTP, I once again checked the Query and it was wrong. I first checked the Request IDs, and I only had the new one. I then went into RSRT and deleted just the cache for that query. After that, the query was working again! Thanks for your help.
Now my questions are how long does it take for the cache to recycle, and what actions can prompt it to recycle (such as changing the query)?

Query with a condition - Overall results row displays incorrect value

Hi All,
I have a bw query with top 40 conditions. However, The Overall Result Row Figures Do Not Equal The Sum of the Column Rows.
Although the top condition is activated, the overall result still displays the overall result of the whole report.
I have 3 columns in the report
Selected Period
Prior Period and
Variance
The formula for variance is (Selected Period/Prior Period)-1.
Does anyone have an idea to fix this?
Thank you so much in advance.
Have a great day!

Hi Gaurav,
Thank you so much for your reply, however this does not solve fully the issue.
Changing the properties to "Summation" will indeed provide me with the correct sum for the "selected period" and "Prior Period." However what I need in the Overall Result Row for the "Variance" column is not the total but instead the value when the total of Selected Period is divided by Prior Period then minus 1.
Overall Variance = (Overall Selected Period/Overall Prior Period)-1
Do you know a way to make this possible.
Thank you so much.

Exception aggregation in one CKF causing problem in Result row of other CKF

Here is my scenario in 3.5x BW:
I have a CKF A which has exception aggregation (to select maximum value) based on a reference characteristic..
Now this CKF A is used in another CKF B and a third CKF C is being calculated based on CKF B. SInce I am using exception aggregation in CKF A, CKF B and C had to be set to be calculated 'after aggregation'.
Formula for CKF C = 100*B/ D (D is another constant CKF, with value 1 for each row).
Now my requirement is that the result row of CKF C should be calculated using the same formula on result row of B and D. This was working when I was calculating A without exception aggregation. But now I need to use exception aggregation aswell as I want the result of C = 100 * Sum(B)/ Sum(D).
I have tried the alternative of using a Formula selection (with formula collision - Result from this Formula)instead of CKF for calculating 'C', but didnot find any success in getting result row of C as per my requirement.
Any suggestions in resolving the issue will be higly appreciated..
Thanks
Shikha

you have created a calculated key figure A in your query, and in the properties of this calculated key figure you have defined the exception aggregation right?
so you can create a second calculated key figure (say A') with the same definition as ckf A, but you don't put any exception aggregation in it. then you need to create a second calculated key figure (say B') to replace the calculated key figure B, and use ckf B' in this new ckf.
when you use now the calculated key figure B' in the formula of ckf C, it should be correct as you use ckf A' as basis, which has no aggregation...
quite straight forward, no?
M.

Misuse of the exception aggregation

Hi Expert
I have a little particular need which I have of the evil to carry out. I explain you, you certainly already had it.
In my cube I have collect, sold to, orders attached to contracts and a surface of contract like this:
                    Surface
R1     Soldto1     Cmd1     Ctr1     10
R1     Soldto1      Cmd2     Ctr1     10
R1     Soldto1     Cmd3     Ctr1     10
R1     Soldto2     Cmd1     Ctr2     20
In my request, I would wish to have:
R1     Soldto1     10
                     Soldto2     20
R1 (next level aggregation) 30
I use the exception aggregation on the contract (exception average by contract) but I don't succed to have the results expected.
My query sends me the result below:
R1     Soldto1     30
                     Soldto2     20
R1 (next level aggregation) 50
How then I to solve this problem? Please help
Best regrads
Eric

Hi Eric,
For your expected result, I think you should use exception aggregation Average with reference characteristic Cmd
as it is the one which differs for the three 10 values.
With this setting, R1 level should also be 30 as you expect.
If you use "Ctr" as reference characteristic, then the three Cmds get aggregated (summation) for Ctr1, that's why you get 30
like "R1 Soldto1 30".
Hope this helps.
Regards,
Patricia

Scenarios for some of the Exception Aggregation

hello Experts,
Please explain some scenarios for the following Exception Aggregation:
1. Counter (value not equal to zero)
2. Counter (all values)
3. Average (value not equal to zero)
4. Average (weighted with no. of days)
5. Average (weighted with the number of workdays; factory calendar)
Thanks in advance.
Regards
Lavanya.

Hi,
check this link
http://help.sap.com/saphelp_nw70/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/frameset.htm
hope this helps you
Best regards,
Ramesh.

Exception aggregation for info object

Hi all,
I have problem using exception aggregation for info object (zabarb) :
The data :
wbs element      zabarb
        1                    100
        1                    100
In query i want to show the data wbs element: 1; zarbarb:100
But in fact i got in query wbs element 1; zabarb :200
I've tried to change info object exception aggregation : average all value with reference char. wbs_element, but still the result in query is 200.
I hope someone can help me.
Thanks.

Hi,
Make these Changes to the Info Object
Aggregation--MAximum
Exception Agg-Summation
Agg Ref Char- wbs_element
Thry this..........
Rgds
SVU

FBL5 FIAR - exception aggregation - count customers with open items at key

Hello gurus,
I have read the information about counting all values in reference to a characteristic. I manage to count how many customers have a FIAR open item 'billing status' = Open in my FIAR cube.
Now I am asked to replicate transaction FBL5 of R3. This transaction will give you open items at a given key date by adding
the items with
A) Item status = 'O' and posting date <= key date
and the items with
B) Item status = 'C' and posting date < =key date and clearing date > key date.
I calculate the net value by creating 2 restricted key figures and then adding them in a CKF.
But for counting I have a problem. I can count how many customer make up the open items (case A)
and how many customers makeup items that where cleared between key date and today.(case B).
But I cannot sum the two numbers as there might be customers that are counted in both cases.
For example I have 4 customers that correspond to case A : 1000 1011, 1012 and 1014
And I have 3 customers that correspond to case B 1000 , 1011 and 1013
I would like to get 5 as the number of customers that verify either case A or case B (or both).
Is there a way to do this with the exception 'aggregation 'and 'count all values' property of CKF ?
Claudio

Hi,
The logic given in the above post may be a bit confusing to you. Check out this explanation and try to understand what I mean.
Posting Date - PD
Key Date - KD
Clearing Date - CD
PD--KD--
CD
-O(Status)-C--O-----C
-5107-----8
Let me explain the above table.
Between PD & KD there are 5 count with status'O' and 10 counts with status 'C'.
Between KD & CD there are c counts with status 'O' & 8 counts with status 'C'.
This means 5 with status 'C' becomes 7 between KD & CD.
Similarly, 10 status with 'O' becomes 8.
The logic I am trying to say is..
If you don't want to get counts with status 'C'(repeated) as I understood) 7-5 = 2. Show this 2 as count for status 'C' between KD & CD.
So the table will become like this now.
PD--KD--
CD
-O(Status)-C--O-----C
-5102(7)---2(8).
In braces shown are the total with status 'O'/'C' for the dates.
I hope this will solve your problem.
Message was edited by: AVR - IGA

Exception aggregation based on two characteristic

Hi Guys
i have enhanced the datasource i.e 2lis_12_vcitm for sales order qty
now i have to get the unique qty based on order no and item no to devide it to get a ratio
how can i do the exception aggregation to take one value based on two characteristics that is order no and item no
Regards
Amiya

hi
Exception aggregation based on 1 characteristics i know very well but my requirement is different i have to get unique data based on two characteristics i.e
order    item   qty
100      10      5
100      20      3
100      10      5
100      10      5
100      20      3
200     10       15
200     10       15
now i want to get 5 for order 100 and item 10
and 3 fro 100 and 20
i think by exception aggregation its not possible is there another way?

No correct exception when using "average of all values"

Hello all,
I have created a query with different duration days as key figures. The result row is displayed for the main characteristic and in the key figures I have select "Average of all values".
The avergae value is calculated correctly in the result row at the end, but the exception is just take sums of the days into consideration, not the average values. Some values are red because there sum would be red, but just the avergae is displayed.
Is there a way how I can apply exceptions also on avergae values?
Th eBW release is 3.5.
Any help would be great.
Best regards,
Stefan from Munich/Germany

Instead of creating a Formula Key Figure, create a Calculated Key Figure .
In that from the Enhance option select Exception Aggregation as Average of all values.
Now use this Calculated Key figure in your query and for creating exception.

How to display values after doing some business logic in data action

hi guys i got the same problem but iam unable to display the values..in my display page when iam trying to do some business logic in my data action class..
can u guys help me out
iam pasting my code which iam working here
my struts-config.xml
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>
<form-beans>
<form-bean name="DataForm" type="oracle.adf.controller.struts.forms.BindingContainerActionForm"/>
</form-beans>
<action-mappings>
<action path="/inputform" className="oracle.adf.controller.struts.actions.DataActionMapping" type="oracle.adf.controller.struts.actions.DataForwardAction" name="DataForm" parameter="/inputform.uix">
<set-property property="modelReference" value="inputformUIModel"/>
<forward name="success" path="/inputAction.do"/>
</action>
<action path="/inputAction" className="oracle.adf.controller.struts.actions.DataActionMapping" type="order.view.InputAction" name="DataForm">
<set-property property="modelReference" value="displaypageUIModel"/>
<forward name="success" path="/displaypage.do"/>
</action>
<action path="/displaypage" className="oracle.adf.controller.struts.actions.DataActionMapping" type="oracle.adf.controller.struts.actions.DataForwardAction" name="DataForm" parameter="/displaypage.uix">
<set-property property="modelReference" value="displaypageUIModel"/>
</action>
</action-mappings>
<message-resources parameter="order.view.ApplicationResources"/>
</struts-config>
my input form uix
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40"
expressionLanguage="el">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui">
<provider>

</provider>
<contents>
<document>
<metaContainer>

<head title=""/>
</metaContainer>
<contents>
<body>
<contents>
<form name="form0" method="post">
<contents>
<messageTextInput model="${bindings.password}" text="username"/>
<messageTextInput model="${bindings.username}" text="password"/>
<submitButton text="submit" event="success" destination="inputAction.do"/>
</contents>
</form>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>

</handlers>
</page>
my display uix
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40"
expressionLanguage="el">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui">
<provider>

</provider>
<contents>
<document>
<metaContainer>

<head title=""/>
</metaContainer>
<contents>
<body>
<contents>
<form name="form0">
<contents>
<messageStyledText model="${bindings.password}" prompt="Prompt 0"/>
<messageStyledText model="${bindings.username}" prompt="Prompt 1"/>
</contents>
</form>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>

</handlers>
</page>
my model bean
package order.model;
public class TestBean
private String username;
private String password;
public TestBean()
public String getUsername()
return username;
public void setUsername(String username)
this.username=username;
System.out.println("the username after actions class:"+username);
public String getPassword()
return password;
public void setPassword(String password)
this.password=password;
my data Action class
package order.view;
import oracle.adf.controller.struts.actions.DataAction;
import oracle.adf.controller.struts.actions.DataActionContext;
import oracle.jbo.uicli.binding.JUCtrlActionBinding;
import oracle.jbo.uicli.binding.JUCtrlAttrsBinding;
import order.model.TestBean;
import org.apache.struts.action.ActionMapping;
import org.apache.struts.action.ActionForward;
public class InputAction extends DataAction
* Delegate to the Struts page lifecycle implementation
* {@link StrutsJspLifecycle#findForward findForward}
* @param actionContext the lifecycle context for the DataAction
* @throws Exception
protected void findForward(DataActionContext actionContext) throws Exception
// TODO: Override this oracle.adf.controller.struts.actions.DataAction method
//super.findForward(actionContext);
TestBean testbean=new TestBean();
System.out.println("this is action form"+actionContext.getActionForm());
String username=(String)((JUCtrlAttrsBinding)actionContext.getBindingContainer().findCtrlBinding("username")).getInputValue();
System.out.println("this is username"+username);
String username1=username+"hye wats up";
testbean.setUsername(username1);
ActionForward forward=actionContext.getActionForward();
ActionMapping mapping =actionContext.getActionMapping();
System.out.println("this is mapping"+mapping);
mapping.findForward("success");
// To handle an event named "yourname" add a method:
// public void onYourname(DataActionContext ctx)
// To override a method of the lifecycle, go to
// the main menu "Tools/Override Methods...".
check this out iam unable to display in my display page so help me out if any one can

No, in this case, I'm using standard JSP with ADF and struts validator.
If I don't use struts validator and there are errors (such as putting a string into a number which produces a jbo-25009), the list value will be retained.
When using the validator, it appears that it is NOT retained.
I've written some code to attempt to set the list element back, which "looks like" it's working right now.
There's still a problem with the second scenario:
1. user clicks checkbox and hits [submit]
2. get's error - you have to enter 5 address items
3. User wants to backout, so he unchecks the box and resubmits
4. The box redisplays as "checked"
SO, at that point, I thought... can't I use YOUR EXAMPLE on how to handle a checkbox.
I place some code in the reset method of the form to perform this:
map.put("AddressChangeFlag", (String) "" );
(that is, I've detected via the request that this flag is null), so I'm trying to make sure it retains it!
I do that and it runs into a problem during the processUpdateModel aT:
BindingContainerValidationForm updateForm= (BindingContainerValidationForm) actionContext.getActionForm();
//Get the binding for our particular column JUCtrlAttrsBinding checkBoxBinding = (JUCtrlAttrsBinding)updateForm.get("AddressChangeFlag");
call, with an error:
JBO-29000: Unexpected exception caught: java.lang.ClassCastException, msg=java.lang.String
java.lang.String
The value for updateForm.get("AddressChangeFlag") is "", which I'm assuming means the form field is no longer in the request object??
I'm lost at this point, and have been working on it for more than 1 day.
Thanks for responding though, and I await feedback ;)

Exception Aggregation (Average) displaying incorrect values after EHP1 Upgr

Similar Messages

Maybe you are looking for