Exchange 2003 Removal fails w/ Error code 0X80072030 (8240): There is no such object on the server- pls read

Dear all,
I know there are quite some threads regarding this issue. But I've been looking at all of them w/o any solution for my problem. Here we go...
I've followed all instructions for a Exchange 2003 to 2010 transition. All went fine to the point I'm trying to uninstall Exchange 2003 via Control Panel/Software/Remove. So far I did the following:
1. Move mailboxes to Exchange Server 2010 using Move Mailbox Wizard or Powershell => successfully
2. Rehome the Offline Address Book (OAB) generation server to Exchange Server 2010  => successfully
3. Rehome Public Folder Hierarchy on new Exchange Server 2010 Admin Group  => successfully
4. Transfer all Public Folder Replicas to Exchange Server 2010 Public folder store  => successfully
5. Delete Public and Private Information Stores from Exchange 2003 server  => successfully
6. Delete Routing Group Connectors to Exchange Server 2003  => successfully
7. Delete Recipient Update Service agreements using ADSIEdit according to
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx => successfully
8. Uninstall all Exchange 2003 servers => fails with "Error code 0X80072030 (8240): There is no such object on the server"
I used the following articles while migrating to Exchange 2010:
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx
http://support.microsoft.com/kb/833396/en-us
http://www.simple-talk.com/content/article.aspx?article=882
and several more.
I looked into these forums regarding my problem and came up with:
http://support.microsoft.com/kb/283089/en-us
http://support.microsoft.com/kb/822931
I investigated the following possible reasons:
- homeMDB attribute (no references to my Exchange 2003 anymore)
- HomeMDBBL attribute (as described here
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmigration/thread/f0e3edd7-34e5-46b8-8061-1991aaffc30f) (no Information Stores available anymore as they have been successfully removed)
- msExchHomeServerName attribute (all pointing to my new Exchange 2010 server)
- the "famous" postmaster issue as described here:
http://support.microsoft.com/kb/283089/en-us (pointing to the new Exchange 2010 server)
In order to investigate all attribute related issues a utilized a VBS script resulting in an Excel sheet I was easily able to filter:
SET objRootDSE = GETOBJECT("LDAP://RootDSE")
strExportFile = "C:\temp\MyExport.xls"
strRoot = objRootDSE.GET("DefaultNamingContext")
strfilter = "(&(objectCategory=Person)(objectClass=User))"
strAttributes = "sAMAccountName,msExchHomeServerName,homeMDB,legacyExchangeDN,givenName,sn," & _
                                "initials,displayName,physicalDeliveryOfficeName," & _
                                "telephoneNumber,mail,wWWHomePage,profilePath," & _
                                "scriptPath,homeDirectory,homeDrive,title,department," & _
                                "company,manager,homePhone,pager,mobile," & _
                                "facsimileTelephoneNumber,ipphone,info," & _
                                "streetAddress,postOfficeBox,l,st,postalCode,c"
strScope = "subtree"
SET cn = CREATEOBJECT("ADODB.Connection")
SET cmd = CREATEOBJECT("ADODB.Command")
cn.Provider = "ADsDSOObject"
cn.Open "Active Directory Provider"
cmd.ActiveConnection = cn
cmd.Properties("Page Size") = 1000
cmd.commandtext = "<LDAP://" & strRoot & ">;" & strFilter & ";" & _
                                   strAttributes & ";" & strScope
SET rs = cmd.EXECUTE
SET objExcel = CREATEOBJECT("Excel.Application")
SET objWB = objExcel.Workbooks.Add
SET objSheet = objWB.Worksheets(1)
FOR i = 0 To rs.Fields.Count - 1
                objSheet.Cells(1, i + 1).Value = rs.Fields(i).Name
                objSheet.Cells(1, i + 1).Font.Bold = TRUE
NEXT
objSheet.Range("A2").CopyFromRecordset(rs)
objWB.SaveAs(strExportFile)
rs.close
cn.close
SET objSheet = NOTHING
SET objWB =  NOTHING
objExcel.Quit()
SET objExcel = NOTHING
Wscript.echo "Script Finished..Please See " & strExportFile
What I did find is that all my Exchange enabled users have an legacyExchangeDN attribute that is still pointing to my Exchange 2003 organization:
e.g. "/o=First Organisation/ou=First Administrative Group/cn=Recipients/cn=Administrator"
Could this cause any problems?
Now the in depth look into my "Exchange Server Setup Progress.log":
[09:33:06] Leaving ScPRQ_DoesNotContainLastMAPIMDBInMixedModeAG
[09:33:06]  ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg (f:\titanium\admin\src\udog\excommon\prereq.cxx:3133)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06]  CCompServer::ScCheckEVSPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:1358)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06]  CCompServer::ScCheckPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:955)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06]  CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06]  CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] === IGNORING PREVIOUS ERRORS === HrSetProblemOnInstallAction, while calling ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1399)
           Der Vorgang wurde erfolgreich beendet.
[09:33:06] Ein Fehler ist beim Überprüfen der Voraussetzungen für die Komponente "Microsoft Exchange" durch Setup aufgetreten:
0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:14]  CComBOIFacesFactory::QueryInterface (f:\titanium\admin\src\udog\bo\bofactory.cxx:54)
I did search for:
- Error code 0X80072030 (8240)
- ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg
Nothing so far. In case some more information is needed just let me know.
Any help would be greatly appreciated as I absolutely don't know how to remove my Exchange 2003. Manual removal is not an option.
Alex

I kept on searching and found something else:
http://www.outlookforums.com/threads/33038-cannot-uninstall-Exchange-2000
It says that the following groups need to be resided in the AD's default "Users" organizational unit:
- Exchange Domain Servers
- Exchange Enterprise Servers
- Exchange Services Group
Unfortunately I cannot find the "Exchange Services Group". Does that have something to do with my problem?
Furthermore I found out that the Exchange 2003 has been originally installed with SBS 2003 back in time. The SBS 2003 has then be migrated to a regular Windows Server 2003 infrastructure with 2 DCs. But there still is a load of stuff reminiscent of SBS
2003 within the AD.
Then I dug deeper into my AD using ADSIEdit. I found another attribute homeMTA that is pointing to a corresponding Exchange server. After adjusting my aforementioned VBS script a was able to look into that attribute as well. I found 2 users pointing to my old
Exchange server within their homeMTA attribute.
Furthermore I saw that when trying to uninstall Exchange 2003 there is no path to my installation anymore. It's empty:
Another issue?
Regards
Alex

Similar Messages

  • Bulk Create Users from CSV: Error: "Put": "There is no such object on the server."?

    Hi,
    I'm using the below PowerShell script, by @hicannl which I found on the MS site, for bulk creating users from a CSV file.
    I've had to edit it a bit, adding some additional user fields, and removing others, and changing the sAMAccount name from first initial + lastname, to firstname.lastname. However now when I run it, I get an error saying:
    "[ERROR]     Oops, something went wrong: The following exception occurred while retrieving member "Put": "There is no such object on the server."
    The account is created in the default OU, with the correct firstname.lastname format, but then it seems to error at setting the "Set an ExtensionAttribute" section. However I can't see why!
    Any help would be appreciated!
    # ERROR REPORTING ALL
    Set-StrictMode -Version latest
    # LOAD ASSEMBLIES AND MODULES
    Try
    Import-Module ActiveDirectory -ErrorAction Stop
    Catch
    Write-Host "[ERROR]`t ActiveDirectory Module couldn't be loaded. Script will stop!"
    Exit 1
    #STATIC VARIABLES
    $path = Split-Path -parent $MyInvocation.MyCommand.Definition
    $newpath = $path + "\import_create_ad_users_test.csv"
    $log = $path + "\create_ad_users.log"
    $date = Get-Date
    $addn = (Get-ADDomain).DistinguishedName
    $dnsroot = (Get-ADDomain).DNSRoot
    $i = 1
    $server = "localserver.ourdomain.net"
    #START FUNCTIONS
    Function Start-Commands
    Create-Users
    Function Create-Users
    "Processing started (on " + $date + "): " | Out-File $log -append
    "--------------------------------------------" | Out-File $log -append
    Import-CSV $newpath | ForEach-Object {
    If (($_.Implement.ToLower()) -eq "yes")
    If (($_.GivenName -eq "") -Or ($_.LastName -eq ""))
    Write-Host "[ERROR]`t Please provide valid GivenName, LastName. Processing skipped for line $($i)`r`n"
    "[ERROR]`t Please provide valid GivenName, LastName. Processing skipped for line $($i)`r`n" | Out-File $log -append
    Else
    # Set the target OU
    $location = $_.TargetOU + ",$($addn)"
    # Set the Enabled and PasswordNeverExpires properties
    If (($_.Enabled.ToLower()) -eq "true") { $enabled = $True } Else { $enabled = $False }
    If (($_.PasswordNeverExpires.ToLower()) -eq "true") { $expires = $True } Else { $expires = $False }
    If (($_.ChangePasswordAtLogon.ToLower()) -eq "true") { $changepassword = $True } Else { $changepassword = $False }
    # A check for the country, because those were full names and need
    # to be land codes in order for AD to accept them. I used Netherlands
    # as example
    If($_.Country -eq "Netherlands")
    $_.Country = "NL"
    ElseIf ($_.Country -eq "Austria")
    $_.Country = "AT"
    ElseIf ($_.Country -eq "Australia")
    $_.Country = "AU"
    ElseIf ($_.Country -eq "United States")
    $_.Country = "US"
    ElseIf ($_.Country -eq "Germany")
    $_.Country = "DE"
    ElseIf ($_.Country -eq "Italy")
    $_.Country = "IT"
    Else
    $_.Country = ""
    # Replace dots / points (.) in names, because AD will error when a
    # name ends with a dot (and it looks cleaner as well)
    $replace = $_.Lastname.Replace(".","")
    $lastname = $replace
    # Create sAMAccountName according to this 'naming convention':
    # <FirstName>"."<LastName> for example
    # joe.bloggs
    $sam = $_.GivenName.ToLower() + "." + $lastname.ToLower()
    Try { $exists = Get-ADUser -LDAPFilter "(sAMAccountName=$sam)" -Server $server }
    Catch { }
    If(!$exists)
    # Set all variables according to the table names in the Excel
    # sheet / import CSV. The names can differ in every project, but
    # if the names change, make sure to change it below as well.
    $setpass = ConvertTo-SecureString -AsPlainText $_.Password -force
    Try
    Write-Host "[INFO]`t Creating user : $($sam)"
    "[INFO]`t Creating user : $($sam)" | Out-File $log -append
    New-ADUser $sam -GivenName $_.GivenName `
    -Surname $_.LastName -DisplayName ($_.LastName + ", " + $_.GivenName) `
    -StreetAddress $_.StreetAddress -City $_.City `
    -Country $_.Country -UserPrincipalName ($sam + "@" + $dnsroot) `
    -Company $_.Company -Department $_.Department `
    -Title $_.Title -AccountPassword $setpass `
    -PasswordNeverExpires $expires -Enabled $enabled `
    -ChangePasswordAtLogon $changepassword -server $server
    Write-Host "[INFO]`t Created new user : $($sam)"
    "[INFO]`t Created new user : $($sam)" | Out-File $log -append
    $dn = (Get-ADUser $sam).DistinguishedName
    # Set an ExtensionAttribute
    If ($_.ExtensionAttribute1 -ne "" -And $_.ExtensionAttribute1 -ne $Null)
    $ext = [ADSI]"LDAP://$dn"
    $ext.Put("extensionAttribute1", $_.ExtensionAttribute1)
    Try { $ext.SetInfo() }
    Catch { Write-Host "[ERROR]`t Couldn't set the Extension Attribute : $($_.Exception.Message)" }
    # Move the user to the OU ($location) you set above. If you don't
    # want to move the user(s) and just create them in the global Users
    # OU, comment the string below
    If ([adsi]::Exists("LDAP://$($location)"))
    Move-ADObject -Identity $dn -TargetPath $location
    Write-Host "[INFO]`t User $sam moved to target OU : $($location)"
    "[INFO]`t User $sam moved to target OU : $($location)" | Out-File $log -append
    Else
    Write-Host "[ERROR]`t Targeted OU couldn't be found. Newly created user wasn't moved!"
    "[ERROR]`t Targeted OU couldn't be found. Newly created user wasn't moved!" | Out-File $log -append
    # Rename the object to a good looking name (otherwise you see
    # the 'ugly' shortened sAMAccountNames as a name in AD. This
    # can't be set right away (as sAMAccountName) due to the 20
    # character restriction
    $newdn = (Get-ADUser $sam).DistinguishedName
    Rename-ADObject -Identity $newdn -NewName ($_.LastName + ", " + $_.GivenName)
    Write-Host "[INFO]`t Renamed $($sam) to $($_.GivenName) $($_.LastName)`r`n"
    "[INFO]`t Renamed $($sam) to $($_.GivenName) $($_.LastName)`r`n" | Out-File $log -append
    Catch
    Write-Host "[ERROR]`t Oops, something went wrong: $($_.Exception.Message)`r`n"
    Else
    Write-Host "[SKIP]`t User $($sam) ($($_.GivenName) $($_.LastName)) already exists or returned an error!`r`n"
    "[SKIP]`t User $($sam) ($($_.GivenName) $($_.LastName)) already exists or returned an error!" | Out-File $log -append
    Else
    Write-Host "[SKIP]`t User $($sam) ($($_.GivenName) $($_.LastName)) will be skipped for processing!`r`n"
    "[SKIP]`t User $($sam) ($($_.GivenName) $($_.LastName)) will be skipped for processing!" | Out-File $log -append
    $i++
    "--------------------------------------------" + "`r`n" | Out-File $log -append
    Write-Host "STARTED SCRIPT`r`n"
    Start-Commands
    Write-Host "STOPPED SCRIPT"

    Here is one I have used.  It can be easily updated to accommodate many needs.
    function New-RandomPassword{
    $pwdlength = 10
    $bytes = [byte[]][byte]1
    $pwd=[string]""
    $rng=New-Object System.Security.Cryptography.RNGCryptoServiceProvider
    while (!(($PWD -cmatch "[a-z]") -and ($PWD -cmatch "[A-Z]") -and ($PWD -match "[0-9]"))){
    $pwd=""
    for($i=1;$i -le $pwdlength;$i++){
    $rng.getbytes($bytes)
    $rnd = $bytes[0] -as [int]
    $int = ($rnd % 74) + 48
    $chr = $int -as [char]
    $pwd = $pwd + $chr
    $pwd
    function AddUser{
    Param(
    [Parameter(Mandatory=$true)]
    [object]$user
    $pwd=New-RandomPassword
    $random=Get-Random -minimum 100 -maximum 999
    $surname="$($user.Lastname)$random"
    $samaccountname="$($_.Firstname.Substring(0,1))$surname"
    $userprops=@{
    Name=$samaccountname
    SamAccountName=$samaccountname
    UserPrincipalName=“$[email protected]”)
    GivenName=$user.Firstname
    Surname=$surname
    SamAccountName=$samaccountname
    AccountPassword=ConvertTo-SecureString $pwd -AsPlainText -force
    Path='OU=Test,DC=nagara,DC=ca'
    New-AdUser @userprops -Enabled:$true -PassThru | |
    Add-Member -MemberType NoteProperty -Name Password -Value $pwd -PassThru
    Import-CSV -Path c:\users\administrator\desktop\users.csv |
    ForEach-Object{
    AddUser $_
    } |
    Select SamAccountName, Firstname, Lastname, Password |
    Export-Csv \accountinformation.csv -NoTypeInformation
    ¯\_(ツ)_/¯

  • SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

    Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine.  It alwayws works for me but after some minutes the other developer cant work in the application
    He got this error
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
    and When I see the log event after that error, it comes with another error.
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
    He has IIS5 and me too.
    I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
    and in the connection string I have.
    <add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
    I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
    Thats strange.
    The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
    If you want me to send logs please tellme

    Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
    Event Type:        Error
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              17806
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
    Event Type:        Failure Audit
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              18452
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
    I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works. 
    As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

  • [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

    Error
    [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.  There
    may be error message
    I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
    My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
    But the error still occurs .
    I checked on Google and  many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
    Mudassar

    Thats my connection string
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
    Excel 2010 installed and its 32 bit edition
    Are you referring to install this component -AccessDatabaseEngine_x64.exe?
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Mudassar
    You can try an OLEDB provider in that case
    see
    http://dataintegrity.wordpress.com/2009/10/16/xlsx/
    you might need to download and install ms access redistributable
    http://www.microsoft.com/en-in/download/details.aspx?id=13255
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • "SSPI handshake failed with error code 0x8009030c ..."

    Hi All,
    Below are the farm configuration.
    1 SQL server with SQL 2005 STD edition in windows 2003 server Std 64 bit.
    1 Application server and 1 WFE server with SharePoint 2007 Std edition in windows 2003 server STD 64 bit.
    Configured with AD account and it has local admin rights on 3 servers.
    Issue:
    Daily morning SQL server is reporting Event ID 17806 error. SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed.
    [ IP of Application and WFE servers].
    During same time SQL server is logging 5788 and 5789 errors. 
    5788 error: Attempt to update HOST Service Principal Names (SPNs) of the computer object in Active Directory failed. The updated values were 'HOST/FQDN name of SQL Server' and 'HOST/SQL Server Name'. The following error occurred:
    There are no more endpoints available from the endpoint mapper. 
    5789 error: Attempt to update DNS Host Name of the computer object in Active Directory failed. The updated value was 'FQDN Name of SQL server'. The following error occurred:
    There are no more endpoints available from the endpoint mapper. 
    At the same point Application and WFE servers are getting 27745 error for thousands of time in 2 minutes. As it is early morning we don't know how the sharepoint application is behaving (accessible are not).  From past 2days we are getting these errors.
    It is happening only for 2 min in the morning.
    27745 error : The description for Event ID ( 27745 ) in Source ( Windows SharePoint Services 3 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote
    computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: #50071: Unable to connect to the database WSS_Content_DB on SQL server.  Check the database
    connection information and make sure that the database server is running..
    To resolve this found few SPN queries, but didnt tried as it is production environment. Is this issue with SPN name of SQL server?
    how to stop this errors?
    Thanks & regards
    V235

    Hi,
    Thanks to share your post in this forum.
    For the issue that you have encountered, if your local asp.net site is running under iis, then you need to set to
    run under a domain account with access the SQL server.
    1) If you only hit the website locally just set impersonate=true in the
    web config and require authentication to ntlm in iis.
    2) If your local box is vista or server2003 set the app pool for the
    asp.net site to the desired domain account.
    3) If none of above, in web.config set impersonate with a username and
    password.
    And some other useful references:
    http://www.associatedcontent.com/article/5725578/techtips_how_to_fix_the_error_sspi.html.
    http://msdn.microsoft.com/en-us/library/ms998320.aspx.
    http://www.bigresource.com/Tracker/Track-ms_sql-HDpysQ7v/.
    Hope this could help you!
    Leo

  • SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

    Hi,
    This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
    Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
    So far I have installed
    http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
    I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
    2012 release.
    Here is the detail of error message:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
    Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (Microsoft.DataTransformationServices.VsIntegration)
    Here are my environment details:
    SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
    Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
    Services Project2\Integration Services Project2\Package.dtsx.
    Does this kind of Shared drives have any impact to give this issue?
    Thanks in advance!
    Ketan
    P.S.: I had look at this forum question -->
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

    Hi Arthur,
    Thanks for your response.
    Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
    1) Some times excel source files cannot be parsed by excel source connection manager.
    2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage  while destination mapping.
    3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file.  <-- For
    this we tried IMEX setting also
    4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
    I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
    As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
    Do you think it is advisable to convert Excel into CSV or Flat file.
    Thanks,
    Ketan

  • Mobile Application Development Installation failed. Error Code: U44M1P7

    After install of DW CS5.5, I tried to update DW CS5.5 and received the following error message, does anyone know how to fix this?
    Mobile Application Development
    Installation failed. Error Code: U44M1P7

    Hi Stillcrazy,
    Welcome to Adobe forums.
    See the solutions in this article http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html and let us know if you still need help.
    Thanks,
    Preran

  • What is this? Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE._

    hi    This event is logged in SharePoint 2010 logs often please help trace the issue also it precedes with Project server WCF code execution which alos is quite slow in execution, means PWA site runing slow. why does status read
    provisioning while i am not running anything.
    please help!!!
    10/03/2011 14:39:23.46 w3wp.exe (0x306C)                      
    0x2FC4
    SharePoint Foundation         Topology                      
    e5mc Medium  
    WcfSendRequest: RemoteAddress: 'http://moss:32843/a667a0a96d314e5e9e6c8fe4866c5db4/PSI/PWA.svc' Channel: 'Microsoft.Office.Project.Server.Interfaces.IPWA' Action: 'http://schemas.microsoft.com/office/project/server/webservices/PWA/AdminReadSiteMapTyped'
    MessageId: 'urn:uuid:0751dbdd-76c0-4410-ac73-2f1782e1513b'
    91b87b3b-e9ad-43b9-9e8c-e553ba7e2f6c
    10/03/2011 14:39:23.46 w3wp.exe (0x1B58)                      
    0x1BA0
    SharePoint Foundation         Topology                      
    e5mb Medium  
    WcfReceiveRequest: LocalAddress: 'http://moss.ccl.local:32843/a247f7273c09486999c9f111798cab59/ProfilePropertyService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://Microsoft.Office.Server.UserProfiles/GetProfileProperties'
    MessageId: 'urn:uuid:772a5c58-c0e4-4b0f-9142-f634fee413a9'
    3cd5bfa5-2e40-458e-9718-788887b44dbe
    10/03/2011 14:39:23.46 w3wp.exe (0x1B58)                      
    0x1BA0
    SharePoint Foundation         Monitoring                    
    nasq Medium  
    Entering monitored scope (ExecuteWcfServerOperation)
    3cd5bfa5-2e40-458e-9718-788887b44dbe
    10/03/2011 14:39:23.64 w3wp.exe (0x1B58)                      
    0x1BA0
    SharePoint Foundation         Monitoring                    
    b4ly Medium  
    Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=179.589584709789
    3cd5bfa5-2e40-458e-9718-788887b44dbe
    10/03/2011 14:39:23.64 w3wp.exe (0x306C)                      
    0x3170
    SharePoint Foundation         Monitoring                    
    b4ly High    
    Leaving Monitored Scope (ExecuteWcfOperation:http://Microsoft.Office.Server.UserProfiles/GetProfileProperties). Execution Time=205.109867315539
    10/03/2011 14:39:23.64 w3wp.exe (0x306C)                      
    0x3170
    SharePoint Foundation         Monitoring                    
    b4ly High    
    Leaving Monitored Scope (ExecuteOnChannel:GetProfileProperties). Execution Time=206.500546857212
    10/03/2011 14:39:23.74 Microsoft.Office.Project.Server (0x0DAC)
    0x0FA8 Project Server                
    Provisioning                  
    8zdn Medium  
    [SERVICE] ProjectQueueService14: Getting list of Sites for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
    10/03/2011 14:39:23.74 Microsoft.Office.Project.Server (0x0DAC)
    0x0FA8 Project Server                
    Provisioning                  
    128v Medium  
    [SERVICE] ProjectQueueService14: Adding Site: ef3acaf4-3e7a-4819-80e0-8e7a85ca417b to sitelist for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
    10/03/2011 14:39:23.77 Microsoft.Office.Project.Server (0x0CD4)
    0x0FA4 Project Server                
    Provisioning                  
    8zdn Medium  
    [SERVICE] ProjectEventService14: Getting list of Sites for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
    10/03/2011 14:39:23.77 Microsoft.Office.Project.Server (0x0CD4)
    0x0FA4 Project Server                
    Provisioning                  
    128v Medium  
    [SERVICE] ProjectEventService14: Adding Site: ef3acaf4-3e7a-4819-80e0-8e7a85ca417b to sitelist for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    General                      
    84yj Medium  
    Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    Sandboxed Code Service        
    ei0p Monitorable
    - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc)     at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)     at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32
    retry, Int32 retryInterval)     at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading perf counters for process "SPUCWorkerProcess".
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    General                      
    84yj Medium  
    Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    Sandboxed Code Service        
    ei0p Monitorable
    - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc)     at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)     at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32
    retry, Int32 retryInterval)     at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading perf counters for process "SPUCWorkerProcess".
    10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)            
    0x300C SharePoint Foundation        
    General                      
    84yj Medium  
    Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.

    Hi there,
    A quick search showed the result on fourm thread:
    It's related to SHarePoint foundation error & this issue occurs when the account under which SPUserCodeService is configured to run does not have the necessary permissions to access the performance counters on the server.
    http://social.technet.microsoft.com/Forums/eu/sharepoint2010setup/thread/9fbcf2a3-1b1f-4fd8-a9b4-dc63ed753973
    To read in support article.
    http://support.microsoft.com/kb/983081Thanks, Amit Khare |EPM Consultant| Blog: http://amitkhare82.blogspot.com http://www.linkedin.com/in/amitkhare82

  • DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

    Hi Board,
    i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
    we drive a 2 node DAG (Location1-Ex1-mb1 
    Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
    Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          28.09.2012 00:37:17
    Event ID:      2112
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Location1-Exc1-MB1
    Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
    Followed by
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:         
    01.10.2012 03:33:06
    Event ID:      2024
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:         
    N/A
    Computer:      Location1-Exc1-MB1
    Description:
    The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
    The backup Application - Symantec Backup Exec 2010 R3 – states, this error
    Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
    Check the Windows Event Viewer for details.
    Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
    Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
    to restart the MS Exchange Replication Service – BUT the mentioned eventID
    8229 isn´t present on any of the both Mailboxservers.
    The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
    This confuses me, since all Backups are normally taken from the passive copy of a Database.
    So my questions to the board are:
    * Does anyone is facing similar issues?
    * Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
    -          * Does someone know the conditions, why shadows copies remain and
    aren´t removed in a proper manner?
    What can cause the circumstance, that only 1 DB is facing such issues?
    Any suggestion is welcome!
    BR
    Markus

    Hi Lenora,
    I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
    those things i´ve all tried now:
    - Backup from passive DB (forced within Symantec Backup Exec)
    - Backup from active DB (forced within Symantec Backup Exec)
    - Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
    - Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
    All those attempts failed.
    But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
    The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
    Backups are working again on all DBs!
    THX for your replys.
    Best regards
    Markus

  • Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update

    Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update on Windows 7.
    Please advise... It appears that some programs available in CS6 did update, just not PS, AI or some of the other programs needed for my current classes.
    Thank you,
    tjr

    Try following the steps outlined in this blog post:
    http://acrobatninja.com/2013/07/fixing-csxs-infrastructure-update.html

  • Calendaring agent failed with error code 0x8000ffff Event id 8206 and 8207

    Hi to all
    We have an Exchange 2007 SP3 with Update Rollup 11 and all the user use Outlook 2003 with SP3.
    Suddenly in our Exchange Server we have start to receive a lot of 8206 and 8207 EXCDO errors in the Application.
    Event Type: Error
    Event Source: EXCDO
    Event Category: General
    Event ID: 8206
    Date:  5/2/2015
    Time:  11:17:41 πμ
    User:  N/A
    Computer: EXCHANGESRV1
    Description:
    Calendaring agent failed with error code 0x8000ffff while saving appointment.
    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 48 72 53 61 76 69 6e 67   HrSaving
    0008: 41 70 70 74 3a 3a 48 72   Appt::Hr
    0010: 43 68 65 63 6b 50 61 74   CheckPat
    0018: 74 65 72 6e 20 66 61 69   tern fai
    0020: 6c 65 64 2e 20 4d 61 69   led. Mai
    0028: 6c 62 6f 78 3a 56 61 73   lbox:x
    0030: 73 69 6c 69 73 2e 4b 6f   xxxx.xxx
    0038: 6e 74 6f 67 69 61 6e 6e   xxxxxxx
    0040: 69 73 40 45 55 52 4f 43   xx@xxxx
    0048: 48 41 52 54 49 4b 49 2e   xxxxxxx.
    0050: 47 52                     GR     
    Event Type: Error
    Event Source: EXCDO
    Event Category: General
    Event ID: 8207
    Date:  5/2/2015
    Time:  11:19:41 πμ
    User:  N/A
    Computer: EXCHANGESRV1
    Description:
    Calendaring agent failed with error code 0x8000ffff while deleting appointment.
    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 48 72 44 65 6c 65 74 69   HrDeleti
    0008: 6e 67 41 70 70 74 3a 3a   ngAppt::
    0010: 5f 48 72 47 65 74 42 75   _HrGetBu
    0018: 73 79 49 6e 66 6f 20 66   syInfo f
    0020: 61 69 6c 65 64 2e 20 4d   ailed. M
    0028: 61 69 6c 62 6f 78 3a 56   ailbox:x
    0030: 61 73 73 69 6c 69 73 2e   xxxx.xxx
    0038: 4b 6f 6e 74 6f 67 69 61   xxxxxxxxx
    0040: 6e 6e 69 73 40 45 55 52   xxx@xxx
    0048: 4f 43 48 41 52 54 49 4b   xxxxxxxx
    0050: 49 2e 47 52               I.GR   
    All the errors come ONLY FROM 1 USER. 
    How can i fix this errors?
    If you require any further information do not
    hesitate to let me know
    Thanks and regards.

    You must ask in Exchange forum
    https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver

  • CcmSetup failed with error code 0x80004005 - windows 8.1

    using sccm 2012 r2, trying to push to a windows 8.1 client i get:
    <![LOG[==========[ ccmsetup started in process 7416 ]==========]LOG]!><time="16:05:28.041+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:9437">
    <![LOG[Running on platform X64]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="util.cpp:1837">
    <![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9272" file="ccmsetup.cpp:9281">
    <![LOG[Launch from folder C:\WINDOWS\ccmsetup\]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:721">
    <![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:727">
    <![LOG[In ServiceMain]LOG]!><time="16:05:28.044+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:3365">
    <![LOG[Running on 'Microsoft Windows 8.1 Pro' (6.3.9600). Service Pack (0.0). SuiteMask = 272. Product Type = 18]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
    thread="9468" file="util.cpp:1919">
    <![LOG[Ccmsetup command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
    thread="9468" file="ccmsetup.cpp:3590">
    <![LOG[Command line parameters for ccmsetup have been specified.  No registry lookup for command line parameters is required.]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context=""
    type="1" thread="9468" file="ccmsetup.cpp:3775">
    <![LOG[Command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
    file="ccmsetup.cpp:3776">
    <![LOG[SslState value: 224]LOG]!><time="16:05:28.085+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:4425">
    <![LOG[CCMHTTPPORT:    80]LOG]!><time="16:05:28.086+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8617">
    <![LOG[CCMHTTPSPORT:    443]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8632">
    <![LOG[CCMHTTPSSTATE:    224]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8650">
    <![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8668">
    <![LOG[FSP:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8720">
    <![LOG[CCMFIRSTCERT:    1]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8778">
    <![LOG[Config file:      C:\WINDOWS\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
    file="ccmsetup.cpp:4539">
    <![LOG[Retry time:       10 minute(s)]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4540">
    <![LOG[MSI log file:     C:\WINDOWS\ccmsetup\Logs\client.msi.log]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
    file="ccmsetup.cpp:4541">
    <![LOG[MSI properties:    INSTALL="ALL" SMSSITECODE="consto" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="16:05:28.088+00"
    date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4542">
    <![LOG[Source List:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4550">
    <![LOG[                  \\TA-SRV-SC.constoplc.local\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
    context="" type="1" thread="9468" file="ccmsetup.cpp:4557">
    <![LOG[                  \\TA-SRV-SC.constoPLC.LOCAL\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
    context="" type="1" thread="9468" file="ccmsetup.cpp:4566">
    <![LOG[MPs:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4569">
    <![LOG[                  TA-SRV-SC.constoplc.local]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context=""
    type="1" thread="9468" file="ccmsetup.cpp:4584">
    <![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="16:05:28.091+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmutillib.cpp:5479">
    <![LOG[No version of the client is currently detected.]LOG]!><time="16:05:28.093+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:2748">
    <![LOG[Folder 'Microsoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="16:05:28.094+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="wintask.cpp:622">
    <![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:9281">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='100' will not be sent.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="1"
    thread="9468" file="ccmsetup.cpp:9763">
    <![LOG[Running as user "SYSTEM"]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:1995">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='328' will not be sent.]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1"
    thread="9468" file="ccmsetup.cpp:9763">
    <![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="16:05:28.119+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:10879">
    any ideas why its failing?

    Hi,
    I've seen the same error on a customer where we had Windows Intune Client (SCCM) installed previously. Did you try it on a newly deployed computer? If you had Intune or another CCM client on it previously make sure you clean it up. Here is a well formulated
    instruction:
    http://douwevanderuit.wordpress.com/2014/01/30/removing-windows-intune-client/
    Usually when deploying to many clients we use a startup script, there is a great one that Jason Sandys made in the link below.
    http://blog.configmgrftw.com/configmgr-client-startup-script/
    There should be no problems deploying SCCM 2012 R2 clients on Windows 8.1 unless there is something wrong with either the setup or the client computer.
    All the best, Jesper Hassing - MCTS SCCM 2012 - MCSA 2012 Server - MCP

  • Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

    Hello,
    I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
    1. Service Pack installation failed with error code 0x800f0a12.
    2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
    Please suggest

    Please run the system update readiness tool.
    http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
    Then post the complete contents of;
    %SYSTEMROOT%\Logs\CBS\CheckSUR.log
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Adobe Media Encoder CC 7.2.2 Update Installation failed. Error Code: U44M1P7

    So, I get this strange error when I try to update AME CC 7.2.2. What to do?
    Adobe Media Encoder CC 7.2.2 Update
    Installation failed. Error Code: U44M1P7

    [ Mac 10.9.3 / Indesign CC update fail / Premiere update fail / Adobe Media Encoder 7.2.2 update fail ]
    AME:lle ei ole omaa unistalleria, vaan sen asentavat muut CC:n ohjelmat käyttöönsä.
    Mulla ei onnistunut ID CC:n ja Premierin päivitys. Niihin olisi ollut tulossa vain tuo AME:n päivitysosa. Ainakin mulla ongelmia näytti aiheuttavan MCMHMPEGVideoCodec.framework, joka esti AME:n päivittämisen. Poistin sen käsin AME:n sisältä.
    Poistin Premieren (uninstall) ja asensin sen uudestaan. Buuttasin koneen. Sen jälkeen molempien päivitys onnistui.
    There's no separate uninstaller for AME. My ID CC and Premiere couldn't be updated (for the AME7.2.2 update). MCMHMPEGVideoCodec.framework seemed to be the factor.
    I uninstalled Premiere (only), after having manually removed MCMHMPEGVideoCodec.framework from inside AME. After boot I installed it again and voilà, both (ID & Premiere) updates went trough fine. The MCMHMPEGVideoCodec.framework was on place inside AME too.

  • [ForumFAQ]How to troubleshoot error "SSPI handshake failed with error code 0x80090324"

    Understanding the problem:
    When connect to SQL Server with Windows authentication, you may receive the following message in the SQL Server error log:
    SSPI handshake failed with error code 0x80090324, state 14 while establishing a connection with integrated security; the connection has been closed.
    Security Support Provider Interface (SSPI) is a set of Windows APIs that allows for delegation and mutual authentication over any generic data transport layer, such as TCP/IP sockets. SQL Server supports Kerberos indirectly through the Windows Security Support
    Provider Interface (SSPI) when SQL Server is using Windows Authentication.
    "SSPI Handshake Failed" error happens usually when connection failed between the server and domain controllers or failed Kerberos Authentication. There are many reason for SSPI Handshake error to appear in SQL Server error log.
    Troubleshot the problem:
    Download and install the Windows error code lookup tool Err.exe to view error descriptions for Windows Error Codes.
    The error code 0x80090324 (SEC_E_TIME_SKEW) means "clock on client and server machines are skewed". In most case, this is a Kerberos issue. Kerberos is using a timestamp to protect against replay attacks. The maximum time skew that can be tolerated
    between a ticket's timestamp and the current time at the KDC is 5 minutes by default.
    Also check the Windows Event Log of client machine, domain controller and the SQL Server machine for existence of W32time error messages.
    The solution:
    Make sure the clock of client server, domain controller and the server running SQL Server are within five minutes of each other. Or Resynchronize the clock by run w32tm /resync on client machine and SQL Server machine.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    This error can happen due to Active Directory configuration issue or Network related issues. Assuming they are fine,
    another reason could be related to fail Kerberos Authentication to connect to SQL Server.
    In Windows 2003 and above, the default method of establishing a connection is Kerberos but if it fails, then connection may be established using NTLM. An error may be registered on SQL Server error log due to Kerberos failure.
    To confirm if you have any database connection using Kerberos authentication, run this on your SQL Server
    SELECT distinct auth_scheme FROM sys.dm_exec_connections
    If you only see NTLM and SQL then, there is no Kerberos connection.
    To use Kerberos, the client and SQL Server must be in the same domain or trusted domains and a Service Principal Name (SPN) must be registered with Active Directory for SQL Server service account.
    You can check if the service account already has SPN, by running this on the SQL Server
    setspn -l <domain\sqlserviceaccount>
    If you don't see anything starting with MSSQLSvc\ then the account is not setup with SPN.
    You can manually register SPN as a Domain Administrator using these commands.
    To      create an SPN for the NetBIOS name of the SQL Server use the following      command:
    setspn –A MSSQLSvc/<SQL Server computer name>:1433      <Domain\Account>
    To      create an SPN for the FQDN of the SQL Server use the following command:
    setspn      -A MSSQLSvc/<SQL Server FQDN>:1433 <Domain\Account>
    If SQL Server service account is granted "Validated write to service principal name" privilege in Active Directory, SQL Server database engine will register itself when it starts and unregisters at shutdown. If you Domain Administrators do not permit this setting
    then you should manually register the SPN and the SSPI error will go away.
    Also the SQL Server service account must be granted "Account is trusted for delegation" privilege in Active Directory. If your SQL Server connects to other SQL Server using Linked Server then the server must also be granted "Trust this computer for delegation
    to any service" privilege.
    For a named instance, you can use the FQDN of the named instance instead of SQL Server FQDN and use the port number.
    For a clustered server, you should use the FQDN of the SQL Server virtual name. In this case you will need two entries, one with port name and one without such as
    setspn -A MSSQLSvc/<Virtual SQL Server FQDN> <Domain\Account>
    setspn -A MSSQLSvc/<Virtual SQL Server FQDN>:1433 <Domain\Account>
    Kerberos authentication works when SQL Server, Service Account and Windows account accessing the SQL Server are in same windows domain. If anyone these are in different domain, there must be bidirectional trust established between the domains, otherwise it
    does not work.

Maybe you are looking for

  • Error 1603 when installing CS4 on Windows 8.1

    Good day I'm trying to install CS4 Design Premium on Windows 8.1 64bit machine. A previous install has failed and I uninstalled it using Windows and AdobeCreativeCloudCleanerTool.exe A couple seconds into the installation (after actually starting the

  • Issue in PCo 2.1

    Hello Experts, We are facing an issue with SAP PCo while working in SAP MII 12.2.We are not able to start a particular agent instance.First we are stopping the agent instance and then when we are trying to start the same it is taking a huge time and

  • Clearing in lockbox FLB2

    Hi Gurus, Appreciate if you can tell me what options i should select in flb2..... Bai or bai2....... Which option from 1 to 5 for invoice no. What algorithm .....001 and 003 or 001 and 001 or 003 and 003...... From where system will get profit centet

  • Error 523 and white screen

    Help - I'm writing on behalf of my mother in law. She has a blackberry Curve and it has a white loading screen once this comes off it goes to the main screen then after 2 mins an app error 523 comes up and then restarts. This keeps repeating a viciou

  • IOS/android - how to mute music player sound when playing app sound?

    Hi, I am trying to achieve the following, in an app for iOS and Android devices: My app contains information that, under certain circumstances, are being read to the user. If the user is playing music using f.i. iPod, i would want the external sound