Exchange 2010 all mail clients with internal cached and internal non-cached mode users having connection status issues, login prompt -- external is fine either way

Hello,
I'm seeing an issue that started this past Monday with no recent change to our environment.
External Outlook Anywhere users and Mobile users, OWA users are unaffected.
Internal Users are affected when using Outlook of any version, 2010 or 2013.
-Internal Users normally log into their workstation with their ad credentials, domain joined machines. Outlook opens without credentials prompting ideally.
1 . Using Cached Mode:
a. Login Prompts, slowness - Since Monday, users are getting prompted to login. The prompt goes away after logging in at startup. It is also causing high CPU
on the workstations.
b. Free/Busy, Out of Office doesn't work. I can, however complete auto-setup for a new user, so autodiscover is not completely down for internal users.
c. Checking Connection Status shows connecting status on highlighted entry below without ever establishing connection (just goes away).
The outlook icon in the system tray says "Outlook is requesting data from the server":
2. Using Non-cached mode
a. No Login Prompt at startup, business as usual
b. Free/Busy, Out of Office works fine. Autodiscover is fine.
c. Checking Connection Status shows normal except, it has "casarray URL, then status is referral" it seams to flicker this constantly then go away intermittently.
d. Main issue in non-cached mode is, sometimes a user will log into windows, open outlook and it will not open and says "server is unavailable. Retry, work offline, or cancel" I can try re-opening, same message.
Only after logging out of windows, logging back in, I can get back into outlook. This is not every time, or consistent with specific users, but random.
3. Lync Pop up for credentials often, though entering the password.
URLs are correct. Autodiscover, EWS, etc.
Already tried bypassing our loadmaster load balancer with host files on clients. same issue regardless of casarray node.
Not sure what is going on.
Josh

You have a hybrid configuration with Office 365, right? You didn't provide this valuable piece of information.
In Exchange Online PowerShell run this command:
Get-OrganizationConfig | FL PublicFoldersEnabled
If the value is "Remote" then users with Exchange Online mailboxes are looking to on-premises public folders. Be sure that you have legacy pubic folder interoperability properly configured.
http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

Has anyone managed to create an email account on the OS X mail client with Exchange 2007?

Hi guys,
the IT chaps of my new employer tell me that it is impossible to use the OS X mail client with Exchange 2007 servers. Is that correct? If so, does anyone know a workaround?
Thanks
Juergen

jthurner wrote:
Hi guys,
the IT chaps of my new employer tell me that it is impossible to use the OS X mail client with Exchange 2007 servers. Is that correct? If so, does anyone know a workaround?
Thanks
Juergen
No workaround needed, open Mail, Contacts and Calendars (in System Preferences) select Exchange, enter your email address and password, opt to setup Contacts and Calendars as well as mail and hit enter. That should set it up (assuming your apparently witless IT dept has setup the autodiscover record correctly at their end)

Probably incredibly simple question, so sorry. I have just changed e-mail after many many years and I want to e-mail everyone in my mac mail client with the new e-mail address at the same time.

Probably incredibly simple question, so sorry. I have just changed e-mail after many many years and I want to e-mail everyone in my mac mail client with the new e-mail address at the same time.

If you are using Address Book, open it, create a new Group, select all you contacts by click the top one while holding down the shift key and then select the last one. Drag the contacts to the group, then send an e-mail to the group.

Exchange 2010 MP : Some Client Access test cmdlets failed to run

Hi all,
This error is triggered in SCOM 2012 R2 about a single Exchange 2010 SP3 server :
Exchange 2010 MP : Some Client Access test cmdlets failed to run.
When I dig into the error context, I can see it's about the cmdlet "Test-CalendarConnectivity -TestType:External".
The TechNet
https://technet.microsoft.com/en-us/library/hh377605(v=exchg.140).aspx proposes to verify that the URL for the external virtual directory can be accessed by running the Test-OwaConnectivity.
OK.
But what sould I specify for the parameter -MailBoxCredential required for Test-OwaConnectivity -URL my_url -MailBoxCredential ?
Thank you.
Have a good day.
FXE

Hi,
Under Administration, run as configuration, profiles, you can check Default action account.
Local system is the account account for agents by default, you can change to use another account.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Exchange 2010 mit Mail 7.2 unter OSX 10.9

Ist Exchange 2010 mit Mail 7.2 unter OSX 10.9 kompatibel?

Hello Daryl,
Thanks for using Apple Support Communities.
I found another Apple Discussion covering the same topic, with a response showing it solved the issue.
How do I restore the "whoosh" sent mail...: Apple Support Communities
https://discussions.apple.com/thread/4236085
Take care,
Alex H.

Exchange 2010 SP2: Different problems with E_ACCESSDENIED on exchange servers

Hello All,
I'm observing a strange problem in an AD 2008 R2 / Exchange 2010 SP2 environment:
When creating a DAG and adding 1 or more servers to the DAG, the following error occurs:
Summary: 2 item(s). 0 succeeded, 2 failed.
Elapsed time: 00:00:05
<MAILBOX SERVER 1> Failed
Error:
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Exchange Management Shell command attempted:
Add-DatabaseAvailabilityGroupServer -MailboxServer '<MAILBOX SERVER 1>' -Identity '<NAME DAG>'
Elapsed Time: 00:00:02
<MAILBOX SERVER 2> Failed
Error:
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Exchange Management Shell command attempted:
Add-DatabaseAvailabilityGroupServer -MailboxServer '<MAILBOX SERVER 2>' -Identity '<NAME DAG>'
Elapsed Time: 00:00:02
There are no logs created on the Mailservers, so I have no more detailed information. Where to start with troubleshooting this issue?
Edit: BTW I already checked the local admin membership of the "Exchange Trusted Subsystem" domain group.
Also commands like get-owavirtualdirectory give the Access Denied error (except on the CAS servers themselves).
You know you're an engineer when you have no life and can prove it mathematically

Hi Frank,
The DAG is not yet populated. When inserting the first server(s) in the freshly created DAG, the error appeared.
[PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Get-DatabaseAvailabilityGroup
Name             Member Servers
Operational Servers
IICT-DAG-002     {}
[PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Get-DatabaseAvailabilityGroup IICT-DAG-002 -Status | fl
RunspaceId                             : cc985264-fa89-48f8-8aba-c1b0c89eb097
Name                                   : IICT-DAG-002
Servers                                : {}
WitnessServer                          : iict-srvp00-011.insourceict.local
WitnessDirectory                       : C:\IICT-DAG-002
AlternateWitnessServer                 :
AlternateWitnessDirectory              :
NetworkCompression                     : InterSubnetOnly
NetworkEncryption                      : InterSubnetOnly
DatacenterActivationMode               : Off
StoppedMailboxServers                  : {}
StartedMailboxServers                  : {}
DatabaseAvailabilityGroupIpv4Addresses : {10.100.0.54}
DatabaseAvailabilityGroupIpAddresses   : {10.100.0.54}
AllowCrossSiteRpcClientAccess          : False
OperationalServers                     :
PrimaryActiveManager                   :
ServersInMaintenance                   :
ThirdPartyReplication                  : Disabled
ReplicationPort                        : 0
NetworkNames                           : {}
WitnessShareInUse                      :
AdminDisplayName                       :
ExchangeVersion                        : 0.10 (14.0.100.0)
DistinguishedName                      : CN=IICT-DAG-002,CN=Database Availability Groups,CN=Exchange Administrative Gro
                                         up (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=InsourceICT,CN=Microsoft Exch
                                         ange,CN=Services,CN=Configuration,DC=insourceict,DC=local
Identity                               : IICT-DAG-002
Guid                                   : 71d5d869-03ac-4f8a-8de7-fc15bc6a0ae1
ObjectCategory                         : insourceict.local/Configuration/Schema/ms-Exch-MDB-Availability-Group
ObjectClass                            : {top, msExchMDBAvailabilityGroup}
WhenChanged                            : 8-6-2012 14:35:59
WhenCreated                            : 8-6-2012 13:35:21
WhenChangedUTC                         : 8-6-2012 12:35:59
WhenCreatedUTC                         : 8-6-2012 11:35:21
OrganizationId                         :
OriginatingServer                      : IICT-SRV003.insourceict.local
IsValid                                : True
You know you're an engineer when you have no life and can prove it mathematically

Exchange 2010 server (Mail,HUB and CAS) installation in new site.

We are planned to install Exchange 2010 servers(MAIL,HUB and CAS) server in new Active director site in existing exchange organization.
Kindly share best practice link for exchange server installation in new site.

The best practice for installing into a new Active Directory site is the same as installing into a new organization, except you don't need to prepare the organization or domains (unless you are also installing into a new domain that hasn't been prepared).
Install the CAS then hub, then mailbox roles, or install a multi-role server, then define your CAS Array name and IP address, and set your CAS behind a load balancer (if needed). Add your external certificate to both the CAS and the load balancer (and the
hub if you use TLS for mail transfer), and you should be golden. Also, if you intend to proxy your CAS connections, here's a link that may help:
https://technet.microsoft.com/en-us/library/bb310763.aspx?f=255&MSPPError=-2147217396
For completeness, here's a thread on the msexchange.org forums that specifically mentions adding Exchange into a second site:
http://forums.msexchange.org/New_Exchange_2010_at_another_Site/m_1800557445/tm.htm

Since the most recent Firefox update 3.6.8 by banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you g

Since the most recent Firefox update 3.6.8 my banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you give me some idea why it is doing this?
== This happened ==
Every time Firefox opened
== Right after the new Firefox update

Hello Anne.
Can you please try it in a new (temporary) Firefox profile and see if the issue is still present? See [http://support.mozilla.com/en-US/kb/Managing+profiles this article] to know how to create a new Firefox profile. Please report back the results.

Query performance problem - events 2505-read cache and 2510-write cache

Hi,
I am experiencing severe performance problems with a query, specifically with events 2505 (Read Cache) and 2510 (Write Cache) which went up to 11000 seconds on some executions. Data Manager (400 s), OLAP data selection (90 s) and OLAP user exit (250 s) are other the other event with noticeable times. All other events are very quick.
The query settings (RSRT) are
persistent cache across each app server -> cluster table,
update cache in delta process is checked ->group on infoprovider type
use cache despite virtual characteristics/key figs checked (one info-cube has1 virtual key figure which should have a static result for a day)
=>Do you know how I can get more details than what's in 0TCT_C02 to break down the read and write cache events time or do you have any recommandation?
I have checked and no dataloads were in progres on the info-providers and no master data loads (change run). Overall system performance was acceptable for other queries.
Thanks

Hi,
Looks like you're using BDB, not BDB JE, and this is the BDB JE forum. Could you please repost here?:
Berkeley DB
Thanks,
mark

I changed my data plan from 6g to 8g while my daughter who attends college outside of the US at Toronto Canada (and we have on a international calling and international data plan) was on spring break at her grandparents house here in the US. I made the ch

I changed my data plan from 6g to 8g while my daughter who attends college outside of the US at Toronto Canada (and we have on a international calling and international data plan) was on spring break at her grandparents house here in the US. I made the change online since I had been waiting on the phone for over 10 minutes for a customer service rep to come available. Well when I made the change online since that seems to be the thing that Verizon wants it's customers to do and I didn't see all the different plans available and just did the upgrade to 8g. Next bill had over $900 in roaming charges on her phone line. I called the 1-800 number and waiting for a service rep and after 20 minutes of waiting and being put on hold was told it was the customers mistake and there was nothing they could do.Thanks for nothing. I called back after thinking about it and wondered why changing a data plan for the phones in the US would change a international call plan. Waiting over 10 minutes again between waiting for a service rep and hold for one to answer the call. Gave her all the information about it and she said she would call back. Well, 4 days later over the weekend she had nevered called back. So on the phone again for the third time and after 20 plus minutes again was told that when I did it online I click the plan that didn't include international call only the data plan. Explained that I never saw the difference in the plan packages so put on hold again and was told that they could credit $100 to my bill. Wow, thanks alot !!! We have been Verizon customers for probably atleast 12 years and this is how you treat your long term customers?

Verizon Wireless Customer Support wrote:
AHARDY454,
We definitely want to review options on what has happened. We are now connection, so you can hover over my username and send me a Direct Meesage so we can review your account information. We look forward to reviewing.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport
TonyG_VZW they can't exactly hover over your username unless you actually link it in your post. The generic username for all the reps just doesn't fly.

Zen Touch users (and possibly non Zen Touch users) with Firmware issues click he

i just got back from the mall.i visited the electroworld branch from which i purchased my zen. i explained to them what my problem is, at first they recharged the player in a usb port in front of me...then they also reformatted it too...told me to stick to the firmware that came with the product..the player responded and thanked them..but hr later, it blacked out again..i came back to the store manager showed him my zen ( he couldnt deny it doesnt have a problem ) and within minutes told me...they are going to give me a replacement. (the diagnosis was AUTO-OFF). they did and im very thankful. right now im charging the new player and hoping...i mean really hoping that this zen works. because im not going to waste my time again even with that warranty. if this zen is defecti've, im gonna li've with its defect..but im going to save up for the fruit's company in my next purchase..better yet why not a new pda...i can play [size="+2"]ZEN TOUCH USERS (and possibly non Zen Touch users)!!!
OH MY GOD
!!! I can't believe it, but after at least 5 hours of troubleshooting, I got it to work!!
I don't know if all of these steps are necessary or not, but this is what I did in approximately this order (I'm so excited now, I'm not even sure if this is the exact order, but I'm almost positi've this is how I did it verbatim). I really, truly hope this works for everyone else.:
ON YOUR ZEN TOUCH:
.) Don't connect device to USB yet
2.) Clean Disk
3.) Format Disk
*Don't bother with restart firmware or reboot; these options are useless.
ON YOUR PC:
.) Do NOT connect device to USB yet.
2.) I did what everyone suggested and rolled my Windows Media Player to v0 (using Add/Remove programs in Control Panel), made sure I had SP2, had the latest drivers, blah blah blah. I'm not sure if this is necessary, but I also uninstalled my Firefox WMP plugin just to be safe. :smileyindifferent:
3.) I un-installed (using Add/Remove programs in Control Panel) and re-installed my Zen Touch drivers, both my 2.0.00 and .30.03 (.30.03 is needed ONLY if you have XP Pro 64-bit edition). I'm not sure if re-installing the drivers is even necessary, but just to be safe, let's say it is. :smileyvery-happy:
---THIS IS THE IMPORTANT PART!---
4.) I plugged my device into my USB port. When it prompts you whether you want to Sync the device with Windows Media Player or Take No Action, don't ignore it and close out. SYNC IT! I made the mistake of thinking that because my firmware was corrupted and my drivers weren't recognizing my Zen Touch as nothing more than a worthless hard dri've that there was no way it would sync with WMP. IT DOES
!!! I don't know how but it freakin' does!
5.) Open up your firmware update file and try to update again. Mine worked immediately and updated the player within seconds!
NOTE: As mentioned on Creative's Support page, probably the only thing they were right about, your device will no longer be compatible with MediaSource. If you want to add music, you have to do it with Windows Media Player 0's Sync page now. And for the love of god, don't update Windows Media Player! It's not worth it! Winamp is way better anyways!
Good luck everyone! I sincerely mean that. :manhappy:
Message Edited by invisiblephrend on 06-07-2008 :32 PMusic files in it, watch movies, save medical books etc..

I also strongly recommend that when Windows Media Player asks you whether you want to sync automatically or manually to choose the manual option. Automatic just randomly grabs music files and could likely add?music you don't want on your device.

LOCAL OLAP CACHE AND GLOBAL OLAP CACHE

what is local olap cache and global olap cache...
what is the difference between ....can you explain scenario plz...
will reward with points
thanks in advance

Hello GURU
Local cache is specific to a user, before BW 3.0 it was only local cache available...if a user run the query data will come to cache from infoprovider and next time same query will not go to Data base instead it will fetch data from cache memory...this cache will be used only for that particular user...if some other user try the same query it will not pick up dta from cache.....
BW 3.0 onward we have global cache which means several user can access same cache for the same query or data which is related in cache...
Thanks
Tripple k

I have macbook pro and am on OS X Yosemite 10.10.2 . I am having lot of warning message on my browser that my computer is infected with malware/spyware and use mackeeper. How do I solve this issue . This is happening more on chrome and Safari browser

I have macbook pro and am on OS X Yosemite 10.10.2 . I am having lot of warning message on my browser that my computer is infected with malware/spyware and use mackeeper. How do I solve this issue . This is happening more on chrome and Safari browser

There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
          com.something.daemon.plist
and
           com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
          com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
           something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
            v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Have an iphone 4 all of a sudden turned off and wont turn on, tried holding buttons, connecting it to pc to restore it, is there any other way i have pretty much tried everything

Have an iphone 4 all of a sudden turned off and wont turn on, tried holding buttons, connecting it to pc to restore it, is there any other way i have pretty much tried everything, what do I do

Hi Sian.riches,
Welcome to the Apple Support Communities!
I know it can be both concerning and frustrating if your iPhone will not turn on as expected. I also know your have done some great troubleshooting already. I would suggest reading over the attached article and trying the troubleshooting steps provided to ensure everything has been done.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Have a great day,
Joe

I have a problem with my bluetooth and Wi-Fi, it seems not to connect and just keep searching

i have a problem with my bluetooth and Wi-Fi, it seems not to connect and just keep searching

Hello there, charles.
The following Knowledge Base article offers up some great information and links in regards to things that can interfere with both Bluetooth and Wi-Fi:
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/ht1365
Additionally the following articles offer specific steps for each:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
and
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Exchange 2010 all mail clients with internal cached and internal non-cached mode users having connection status issues, login prompt -- external is fine either way

Similar Messages

Maybe you are looking for