[Exchange 2010] Autodiscover on outlook 2010 doesn't work and OWA can't be browsed internally

Hi,
Since this morning, I'm getting weird issues with Exchange.
1) Some people can open OWA with Firefox but with IE or Chrome can't. On Chrome, it says the certificate is malformed and hence it can't open the website. I can access OWA externally.
2) Some users are getting security alert for OWA and autodiscover certificate.
3) Autodiscover doesn't work and it failed to connect when I run test connectivity and configuration from Outlook client.
Has anyone had any similar issues like this?
Since that we didn't make any change to the environment and email is going through fine via outlook, I'm afraid to do some config changes on Exchange.
Thanks,
John

It's fixed now. It was the issue with comodo certificate. Comodo issued a new intermediate cert yesterday morning. Some users didn't get the cert so we pushed out manually.

Similar Messages

I had to change my Apple ID and password in itunes. Now my icloud doesn't work and I can't update my apps on my iPhone. I have looked at suggestions on the community pages and apple suggestions but none of them are relevant to iOS 8.1.2 icloud just

I had to change my Apple ID and password in itunes. Now my icloud doesn't work and I can't update my apps on my iPhone. I have looked at suggestions on the community pages and apple suggestions but none of them are relevant to iOS 8.1.2
icloud just keeps bringing up my old email address & asking for my old password which doesn't exist anymore and when I try to sign out of icloud it wants my old password, when I tried to change my primary email back to the old one it wants me to verify it through an email address that doesn't exist. Please can you help me sort out this nightmare.

Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe

Recently had hard drive replaced due to recall. Now iWork doesn't work and i can't successfully reinstall. Help

Recently had hard drive replaced due to recall. Now iWork doesn't work and i can't successfully reinstall. Help!

apple os 10.6.8
i works version 9.0 in box set for leopard - family pack purchased for my son's computer. Tried to install iwork form this and just got me unresponsive icons. Acts like was successful, but then files won't open and iwork's "pages", "keynote" and "numbers" won't launch.

TS1702 After I update my ios to ios7 my appstore doesn't work and I can't download anything

After I update my ios to ios7 my appstore doesn't work and I can't download anything

Be sure you are logged into the App Store using your Apple ID. Check in Settings > iTunes & App Store
You can also try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

I have iphone 3gs and im update my iphone to ios 6 and after it doesn't work,and i can't restore my iphone please help meeeeeeeee,i neeed my iphone:(

i have iphone 3gs and im update my iphone to ios 6 and after it doesn't work,and i can't restore my iphone please help meeeeeeeee,i neeed my iphone:(

how can i restore my iphone without update?because when i want restore itunes told me restore and update and when i restore and update my iphone take the ios 6 and it doesn't work again...please help mee...tnnnxxx

Mobile data doesn't work and I can't access the front camera.

Hi, I received my new Xperia Z3 Compact in white just over a week ago and unfortunately I have few unresolved issued with it which kind of spoils the experience of owning a new phone.
I just switched from a number of Iphones and Xperia was the handset that really impressed me.
I couldn't see the point of getting an overpriced Iphone with a limited storage capability.
Unfortunately my Xperia Z3c has some issues;
- I can't get the front camera work
- I can get my internet only through Wi-Fi and my unlimited 3G data doesn't work at all (T-Mobile U.K)
- Three Swipe Gesture doesn’t appear to be working as it should on any Android device (I'm told).
So I am not a very happy user at the moment and slowly starting to miss the Iphone.

Hi casson50ml,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Sorry to hear about these issues, I would first suggest clearing the data for the camera.
Menu > settings > Apps > All > Camera > Clear Data
Once done try using the device.
In regards to the Internet, try performing an Internet settings download.
Menu > Settings > More > Internet Settings > Accept Disclaimer > Choose Network.
Now try using the network data on the handset.
Can you explain more about the 3 Finger Gesture issue?
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Firefox 4.0 displays an error code when launching: "TypeError: Components.classes[cid] is undefined", add-ons doesn't work and I can't open any web pages

Hello
I've been running Firefox 3.6.16 with no problems at all, and this morning decided to upgrade to Firefox 4.0, as the developer of the them I use, Foxscape, has upgraded it to work with 4.0. The installation appeared to be as normal, but when I launched 4.0, the following error message appeared: error "when launching firefox 4.0 TypeError: Components.classes[cid] is undefined". The browser launched, but while I could go to webpages if they were in my bookmarks, so no problems with my internet connection, but when I typed in a URL (for example google.co.uk) and pressed "go", nothing happened. Similarly, when I tried to go to add-ons, it was as if I hadn't clicked anything. I wondered whether it was an issue with Foxscape (although I've never had any problems before when upgrading, as the standard theme just appears) so I reverted to 3.6.16, switched the theme to standard, then tried upgrading to 4.0 again. The same thing happened, so I'm positive it's got nothing to do with Foxscape.
I run Windows Vista Home Edition on a Dell Inspiron. I also have IE 9 installed (I installed it a few weeks ago, and it's been running fine with 3.6.16). I've never had any problems with Firefox before; I'm very keen to upgrade to 4.0, and would appreciate your help in fixing this.
Thanks

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Ios 8 doesn't work and we can't restore to 7.1.2...

Hi Apple, I know there are many many loyal Apple customers out there that are experiencing issues with the new ios 8. After upgrading to ios 8, my ipad 2 is pretty much not usable. I am not able to revert back to 7.1.2 due to limitations that Apple has placed on going back to older firmware. Come on Apple! Open the signing back up so we can go back to an older firmware and be happy again!

This is an iPad user to user forum, so you are not addressing Apple.
Send feedback/suggestions to Apple.
http://www.apple.com/feedback/ipad.html
Submitting Feedback to Apple
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/submittin g-feedback-to-apple
File an Apple Bug Report, at http://bugreport.apple.com/
Apple has provided no methodology for downgrading the iOS.
 Cheers, Tom

My passcode doesn't work and i can't unlock my ipod

hi, i made a passcode to unlock my ipod and then i locked it to make sure it worked and when i tryed to unlock it, it said my passcode was wrong. i don't know how to open it and change it. HELP ME!!!!!

http://osxdaily.com/2011/01/16/forgot-iphone-passcode-how-to-reset/

I cannot figure out how to make the text larger on an incoming email. The finger method doesn't work and I cannot find any toolbar with which to do it. I could find nothing in settings also. Plese help and thank you.

I cannot figure out how to make the text larger in a received email. The finger method doesn't work and I can find no tool bar as I can for composing emails. I can find nothing in settings. Please help and thank you in advance.

Hi there,
Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
Good wishes,
John.

Search in Outlook 2010 with Exchange Server 2010 doesn't work properly

Hi all,
I have a problem with a clients Exchange 2010. Search function in Outlook 2010 doesn't work properly, the employee can't search mails and contact - he doesn't get any result :-(
In application syslog/protocol I get this error:
Function 'CISearch::EcGetRowsetAndAccessor' found, content indexing for database 'Mailbox Database 0139257080' caused by MSSearch-Error '0x80041820' deactivated
Can anybody help me with this, if its necessary I can give further information :-)
Thomas
Thomas Deinert

Hi,
What’s Exchange Version? Sometimes, after Installing Exchange 2010 SP 1, Searching via OWA or Outlook Online Mode may Fail. If so, please try the following solution:
Download the script
Repair-ExchangeSearchSymlinks.ps1 from the Script Center.
Copy the Repair-ExchangeSearchSymlinks.ps1 script to the Scripts directory on the Mailbox server (default installation is C:\Program Files\Microsoft\Exchange Server\v14\Scripts).
On the afflicted Mailbox server, open the Exchange Management Shell by right-clicking the shortcut and selecting “Run as Administrator”.
Within the Exchange Management Shell, navigate to the Exchange Scripts directory.
Within the Exchange Management Shell, run the following script: .\Repair-ExchangeSearchSymlinks.ps1
Within the Exchange Management Shell, run the following script (without the symbols [] and substitute the database name(s) for any databases you wish to reset: .\ResetSearchIndex.ps1 [-force] <dbname> [<dbname>]...
You will receive an Event ID 109 when the rebuilding of the index starts for each database and an Event ID 110 for each database when the index rebuild has completed.
After receiving Event ID 110 for each database, test to make sure search functions correctly with both OWA and Outlook operating in Online Mode.
Similar thread:
https://social.technet.microsoft.com/Forums/exchange/en-US/35db030c-277f-49d6-83d6-772f839a47f8/owa-2010-sp1-search-problems?forum=exchange2010
Best Regards.

Exchange 2010 Ative Sync working fine but when i do the test-ActiveSyncConnectivity it gives Error

Exchange 2010 Ative Sync working fine but when i do the test-ActiveSyncConnectivity it gives Error my internal and external domains are different i have godaddy certificate and i have redirected HTTP to HTTPS for OWA, but when i run the test-ActiveSyncConnectivity
https://mail.mycompany.com/Microsoft-System-ActiveSync it gives me error unable to connect to remote server, the connected party did not respond after a period of time because connected server failed to respond 67.57.66.23:443
From outside owa and activesync is working but my outlook 2007 SP2 shows disconnect every 25 minutes and then connected again when i see windows evenyviewer i am getting error that CAS Server failed to connect to mailbox server. Later it disconnected for
60 seconds, I think thats when outlook gives disconnect error to all users
Your quick help is really appreciated

Hi,
Hope below KB will help you for resolution the issue
http://support.microsoft.com/kb/2469722
http://www.wiki-errors.com/err.php?wiki=443
Dinesh S.

Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location.

Samsung Printer ML 2010 doesn't work since Mountain Lion

Upgraded to Mountian Lion today and now my Samsung printer (ML 2010) doesn't work. I uninstalled it then added it back and still doesn't work.

Hey majiqlady,
I have a couple of articles here for you that may help you resolve this issue. This first article is about changing or updating printer software in Mountain Lion, and can be found here:
OS X Mountain Lion: Change or update printer software
http://support.apple.com/kb/PH10622
This next article tells you where to find the printer software for your specific printer brand:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Exchange 2010 server (Mail,HUB and CAS) installation in new site.

We are planned to install Exchange 2010 servers(MAIL,HUB and CAS) server in new Active director site in existing exchange organization.
Kindly share best practice link for exchange server installation in new site.

The best practice for installing into a new Active Directory site is the same as installing into a new organization, except you don't need to prepare the organization or domains (unless you are also installing into a new domain that hasn't been prepared).
Install the CAS then hub, then mailbox roles, or install a multi-role server, then define your CAS Array name and IP address, and set your CAS behind a load balancer (if needed). Add your external certificate to both the CAS and the load balancer (and the
hub if you use TLS for mail transfer), and you should be golden. Also, if you intend to proxy your CAS connections, here's a link that may help:
https://technet.microsoft.com/en-us/library/bb310763.aspx?f=255&MSPPError=-2147217396
For completeness, here's a thread on the msexchange.org forums that specifically mentions adding Exchange into a second site:
http://forums.msexchange.org/New_Exchange_2010_at_another_Site/m_1800557445/tm.htm

[Exchange 2010] Autodiscover on outlook 2010 doesn't work and OWA can't be browsed internally

Similar Messages

Maybe you are looking for