Exchange 2013 External Incoming Emails With Large Attachments Disappearing No NDR

I have a problem I am running Exchange 2013 recently upgraded to service pack one hoping to fix the problem no luck changed the ConnectionTimeouts on the recieve connectors no luck, diasabled certain commands chunking and BinaryMime no luck I can recieve
large attachements internally and send to external users but no user is able to recieve emails with attachments bigger than 1 MB all formats doc,xlsx,pdf etc and there is no NDR the attachment is either stripped or the email disappears into thin air literary.
I am about to lose my mind over this. This started a month ago howcan I test at what point between the sender and myself the emails are being filtered all other emails come through as long as the attachments are less than 1 MB.

Hi Bright,
Agree with Ed, you should check if there is anything between the internet and your exchange server.
If there is any update , please post here.
Best regards,
Niko Cheng
TechNet Community Support

Similar Messages

Mail only downloads headers of emails with large attachments

Hi-
I have Maverick.
My mail is delivered though an Exchange Server.
At present emails download fine UNLESS they have a large attachment.
If they have a large attachment, the email will appear in the central "preview" pane with the address of the sender and the subject line, but will otherwise not download.
The email will only start to download once I click on the email in the preview pane. This can be laborious if I have 50+ emails with large attachments.
How do I configure mail so that it will download the emails, irrespective of the size of the attachments.
Thanks,
Richard

Some problems with Exchange mail have been solved by disabling Autodiscovery.

Can't delete email with large attachments

Received two email with large attachments (photos in format that iphone doesn't recognize). Now can't delete or move to trash these two email. They just return to inbox and mail freezes, goes black, or returns to home screen. Clearing out all other mail in trash doesn't help. Reset doesn't help. I can still receive new email to my inbox and delete those just fine, but these two large email with attachments are stuck in my inbox.

Well, I have the same problem. I tried to delete the specific account and redo it - but the ** email was still there. I've gone to the webmail site for the account, and deleted it there. It's deleted from my laptop, but keeps coming back on my iPhone. So, my iPhone is set to show 25 emails, but I don't understand what you mean by "send yourself 25 messages". Sounds like your solution works, and I'd sure like to try it. Looks like Apple needs to come up with an easier solution too. Thanks.

Emails with large attachments failing to download.

I have a problem downloading emails with large attachments (6500KB plus) in Incredimail which I believe is a McAfee NetProtect Plus conflict. When downloading Incredimail shows "RECEIVING", number of emails and the percentage downloaded. With large files it will hang flashing RECEIVING but not increasing the percentage. Task manager shows Incredimail using lots of CPU and also McAfee coming in and out but no traffic on the network.
The only way to stop this is to cancel receiving and try again. Sometimes this clears it, after two or three attempts. Sometime I have to log onto BT Yahoo mail and delete the large attachment. A side result is that I get emails duplicated because they are still on the host when I cancel and are thus downloaded again. If I boot in safe mode and just start Incredimail then everything downloads in seconds, so I am convinced that it is McAfee scanning that is causing the problem.
Any suggestions please?

You are not alone experiencing problems downloading attachments to MS Outlook etc see:-
Problem with large email downloads in Outlook Expr...
I have just been told by the helpdesk there is a 10MB limit, so you should not have a problem.
Duplicate e-mails are due to session not completing. I have had this problem as well.

Emails with large attachments not arriving

We have an open limit on email size but consistently emails with large attachments do not arrive at the destination (even to the same domain). They do go into the clients sent box. Any thoughts on how to trouble shoot? thanks

John H wrote:
The command tells me I have 0 message size limit
The limit in the admin server is set to 1000MB
For gigabyte-class file transfers, you'll really want to use a different path — that message size is easily approaching a denial-of-service scale message size, if not exceeded it.
If you really want to try doing attachments of that size and all the intervening SMTP servers support it, then try setting the message size manually via something like the (untested) following commands:
sudo postconf -c /Library/Server/Mail/Config/postfix message_size_limit -e "message_size_limit = 10485760"
sudo postfix reload
Or to whatever specific attachment size you want to try to use. The unit is in bytes.
The other Postfix setting that tends to get involved here is mailbox_size_limit, as well as whatever quotes might be in use for the specific users.

Emails with large attachments vanishing

When I send an email with a large attachment it is not saved in the sent folder. All other emails are saved in the sent folder. The emails are received by the recipients. What is the problem and what is the solution?

The last time this happened the attachment in question was only 8.7 MB, well below the max of 20, and like I said it was received. If I had tried to send an attachment that was larger than the limit it would not have gone through.
I can't say that it only happens with larger attachments as some of my larger attachments have gone through. In my case it may be a coincidence that I have only noticed this on larger attachments.
Other people are having similar problems:
Re: Sent mail disappearing?
How do I get Apple to support the service that I am paying for? A message board is a terrible way to address problems. Maybe with a better system of monitoring problems, say a phone number to call for help with such issues, and Apple could hear about problems before they read about them in the press.
I need a record of all sent emails.

Z10 issue forwarding emails with large attachments

I am having an issue with my Z10 on Rogers running 10.0.10.85 version of the o/s using Exchange/ActiveSync.
I am unable to forward emails with attachments greater than about 300kb from my Z10, The emails just stay stuck in the inbox with the "sending" logo and they never send.
I really need to resolve this and our IT team is stumped? Has anyone else seen this? Any resolution?

Send this to your IT team and see if it helps. Within 3 minutes of making the changes all was fixed, that is of course if it's the same issue.
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Cannot-send-some-attachments-or-pictures-red-c...

Exchange 2010 SP3 - Delayed emails with XLSM attachments...

Running Exchange 2010 SP3 Rollup 5. Clients running Windows 7 and Office 2010 Pro Plus SP2. Have one specific user / client that when sending emails with an XLSM attachment around 5:30AM, the email is delayed getting to the Exchange server and
is delayed up to 16 hours. Unfortunately, this is a random occurrence, and not necessarily easy to duplicate.
The Sent Items on the Outlook client reflect the correct sent time, but the Message Tracking Log on the Exchange server shows the server did not receive the email until approximately 12 to 16 hours later.
The desktop is a shared system and this issue appears to be isolated to the user's profile, AD account, or Exchange. I've literally blown away the users local profile and reconfigured it with no resolution.
Any suggestions are greatly appreciated.
Fuel

Hi,
Please verify whether there is any error/warning/information message left in App log. If yes, please paste the details without sensitive information.
I suggest re-send a .xlsm attachment for testing to verify whether it delays.
Thanks
Mavis
Mavis Huang
TechNet Community Support

RECEIVING email with LARGE attachments

All,
I have searched the Verizon site, withou luck, trying to find the maximum incoming email size that Verizon will accept. I recently had a colleague send me a pdf file attachment that was 15.4 MB and it was bounced by Verizon. Everyone seems to be locked into the maximum size attachement you can SEND without ever quoting the maximum size you can RECEIVE. In fact the Verizon support area is totally worthless on this issue. The FAQ they have that is SPECIFICALLY titled "How large of an attachment can I send or receive through email?", only addresses the maximum size you can SEND.
So, does anyone here have any idea? It obviously isn't 20MB send and 20MB receive.
Thanks in Advance,
RRS

Additional data... I had my colleague send the 15.4 MB pdf file to my gmail account where I forwarded it to my Verizon account. The results of the forwarding was the following message:
"Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 552 552 5.3.4 a message size of 20483 kilobytes exceeds the size limit of 20480 kilobytes computed for this transaction (state 18)."
I'm not sure how the 15.4 grew into 20.48 but that was the message... just 3 KB over. So I decided to test the system. I compressed the PDF file into a zip folder and sent it. The compressed PDF had compressed down to 14.8 MB. Once again an error message. The message follows:
"Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 552 552 5.3.4 a message size of 20483 kilobytes exceeds the size limit of 20480 kilobytes computed for this transaction (state 18).
So much for compressing the file.
Interestingly... a short time later both of the files were delivered delivered to my inbox at Verizon.net.
What in the WORLD is going on here?
RRS

How can I visualise Emails with large attachments?

Background: Working in corporate environment with Exchange with Mailbox limits.
From time to time I'm running out of quota, then I need to move Mails locally (by Smart Mailbox) or delete them.
Insted of doing this reactive I would love to see Emails marked in color (rules?) so I can take care of them while I read them so I don't need to touch them twice.
Thx
-Walter
P.s. Using Mail, not Outlook.

What email service are you using to write your emails? Or are you using a Thunderbird?
If you use a webmail service like hotmail or GMail, you can probably find the information you are looking for in that service's help documents. Look for a link called "help" or "support" on the site where you read your emails.

Publishing Exchange 2013 Outlook Web App with Forefront TMG 2010

Hello guys,
I have published Exchange 2013 via TMG 2010 with pre-authentication. Since this is the first time I am doing it- I want to ask experts for the explanations:).
When I configure Active Sync on mobile, I just type the password and it's starts syncing after 20 sec.
When I use browser and trying to login using TMG logon screen, after I enter credentials (if they were not wrong), I get exchange 2013 logon screen ( because my password was checked by DC's).
I have customized TMG tamplate to Exchange 2013 tamplate, but it did not help- I have two logon screens.
Is it possible to configure TMG for showing only one logon screen ( without disabling pre-authentication) ? Does it work this way?
Did I miss something?

Hi,
Please try to enable FBA for external and internal OWA 2010 users by the methods in the blog below.
There are several ways to accomplish this:
Have internal users pointed to the internal interface of the Forefront TMG and utilize the forms-based authentication logon page offered by Forefront TMG.
Deploy Forefront UAG instead of Forefront TMG. Forefront UAG allows you to have FBA enabled on both the Exchange 2010 Client Access Servers and on the Forefront UAG solution itself.
Publish Exchange 2010 to the Internet using Forefront TMG but do not configure pre-authentication. This way the users need to go through the Forefront TMG solution, but will authenticate directly against the Exchange 2010 Client Access servers.
Configure an additional OWA and ECP virtual directory on the Exchange 2010 Client Access Servers.
Reference:http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/enabling-forms-based-authentication-external-internal-owa-2010-users-exchange-2010-published-using-forefront-tmg-2010-part1.html
Then check the blog
- Creating a custom Forefront TMG 2010 OWA FBA logon page
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Mail hangs when I try to open emails with certain attachments

When I try to open emails with certain attachments, rather PS files (if I recall correctly) it hangs. It seems that Mail is trying to load the PS file for me, and maybe convert it to PDF, which take awful lot of time.
So at the moment I cannot do anything! Because even if I force quit, and start the Mail program again, it tries to open this same email again!
My question is: How can I prevent Mail from automatically loading attachments? I would the same for images etc. I want the power to load and view attachments whenever I want them to load.

Do you keep the message preview pane open?
If so, close the message preview pane below the message list by double-clicking on the horizontal divider bar that separates the message list from the preview pane.
This will require double-clicking on a message in the message list to open it. If you have the Attachments and Message Size columns selected for the message list, you can select when you want to open a message that contains a large attachment or attachments.
If this is for a POP type account, there is no setting in Mail to prevent a message attachment from being loaded when opening the message if the message with attachment has been downloaded from the server.
Have a look at Mail Attachments Iconizer.
http://lokisw.com/index.php?item=MailAttachmentsIconizer

Retrieve and read incoming emails and their attachments

Hi,
Does anyone have experience of retreiving incoming emails and their attachments using PLSQL?
We have a requirement to process the data contained in csv files. These files are sent as attachments with emails and the number of attachments sent with the emails can vary. Is there a way of retreiving emails from a POP3 account and "dettaching" the flat files for import into the database?
Thanks,
Andrew.

I can only think of the UTL_TCP package:
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/u_tcp.htm#998101
Regards,
Gerd

Can´t send emails with pdf attachments - why?

Since i moved all my accounts to my new airbook (OS X 10.8.2) everything works fine BUT i am not able to send emails with pdf attachments.I have an exchange and a mac.account - but they both won`t work.
The emails stay put in the local ausgang? exit box and won`t move away unless i delete them.
i checked the accounts, the activity - all says it works fine - but it doesn`t!
Maybe in the *deep* of my mac is one thing that says no pdf - but where can i find it?
I appreciate every helpful hint :-)
greetings

it tries to send the email for about five minutes and than gives the message *server doesn't work* you want to try another? repeat? or later?
when i change the server e.g. from exchange to mac - tries again and without further notice i find the message in the outbox - even when i click that one and *send* again - nothing changes......
I already tried to name the attachments in.pdf - i also change the pdf to jpeg - nothing works - all emails i write after that go immediately to the outbox - so when i want to send messages at all i need to delete the ones with the attachment or send the other ones manually
Please notice in the activity window there is a lot of traffic :-) but it doesn`t help
i even closed all other programmes like excel,safari and stuff - but still
and i still have al lot of free GB on my airbook....
any idea????

Sent Mail with Large Attachments

Hello everyone,
I've noticed that emails I send from Mail on my Mac (which have larger attachments) don't go into my Sent folder.
There is no record of them being sent. However, I know they've been sent because I get replies to them.
Emails with no attachments or small attachments go into the Sent folder fine though.
Does anyone know how to fix this?
Thanks a lot....

meganano wrote:
Yep. It's perfectly legit to not want to save copies of photos, audio files or contracts that I have on my computer when only a record is needed.
So far, this is the most elegant solution I've found. http://www.betalogue.com/2012/11/13/lionmail-removeattachmentsfix/
Fie on you, Apple!
@meganano:
Fie? They probably won't understand . . . but, thanks for posting that link, seems easy enough to do . . . . I'll check it out in a few days . . . working on getting another usually buggy linux system running on my MBPro . . . it's a better approach than saying "Fie" . . . . : - )
e.e.p.

Exchange 2013 External Incoming Emails With Large Attachments Disappearing No NDR

Similar Messages

Maybe you are looking for