Exchange 2013: Inbox rules don't work on Journal Mailbox

Hello,
I've Exchange 2013 server with 2 databases:
* First database has all user mailboxes & is journaled to second database
* Second database has only 1 mailbox: Journal which collects all messages send / received from / to first database.
I made Inbox Rules on Journal Mailbox to delete unnecessary messages e.g. :
* HealthMailbox messages with Subject: Client submission probe
* [email protected] messages with Subject: Inbound proxy probe.
I noticed that these rules don't work. Why ?
best regards Janusz Such

Hi,
How do you create these Inbox Rules on journal Mailbox? Please share the detailed rule content here and we can check whether the rule was created correctly or not.
Instead of journaling all mailboxes residing on a mailbox database, I suggest we can configure journal rules to match your organization's needs by journaling individual recipients or members of distribution groups. For more information about
journal rules, please refer to:
https://technet.microsoft.com/en-us/library/jj651670%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Exchange 2013 CU3 Retention Policy Not working for Calendar & Tasks

We are currently on Exchange 2013 CU3 with Online Archiving Enabled for the user
Default policy is set to move all the items in mailbox which are older than 30 days to online archive mailbox.
Calendar and Tasks Items are also getting archived alongwith other Outlook items from Inbox,Deleted Items etc
Followed Technet website and created RPT for Calendar and Tasks with retention disabled
Still DPT takes precedence and move all the items under Calendar and Task to Online Archive Mailbox

Hi Sam,
I recommend you refer to the following article, despite this for Exchange 2010, however the same applies to exhcnage 2013:
Prevent archiving of items in a default folder in Exchange 2010
To prevent the <acronym title="Default Policy Tag">DPT</acronym> from being applied to a default folder, you can create a disabled <acronym title="Retention Policy Tag">RPT</acronym> for that folder (or disable
any existing RPT for that folder). The Managed Folder Assistant, a mailbox assistant that processes mailbox items and applies retention policies, does not apply the
retention action of a disabled tag. Since the item/folder still has a tag, it's not considered untagged and the DPT isn't applied to it.
Why are items in the Notes folder still archived?
If you create a disabled <acronym title="Retention Policy Tag">RPT</acronym> for the
Notes folder, you'll see items in that folder are not deleted, but they do continue to be moved to the archive! Why does this happen? How do you prevent it?
It's important to understand that:
A retention policy can have a <acronym title="Default Policy Tag">DPT</acronym> to
archive items (using the Move to Archive retention action) and a DPT to
delete items (using the Delete and Allow Recovery or
Permanently Delete retention actions). Both apply to untagged items.
The move and delete actions are exclusive of each other. Mailbox folders and messages can have both types of tags applied - an archive tag and a delete tag. It's not an either/or proposition.
If you create a disabled RPT for the Notes folder to not delete items, the archive DPT for the mailbox would still apply and move items.
When it comes to archiving, there's only one archive policy that administrators can enforce – the <acronym title="Default Policy Tag">DPT</acronym> with 'Move to archive' action.
You can't create a <acronym title="Retention Policy Tag">RPT</acronym> with the 'Move to archive' action. This rules out using the disabled RPT approach to prevent items from being moved.
Best regards,
Niko Cheng
TechNet Community Support

Exchange 2013 Autodiscover Android IOS not working

Hello,
I configured exchange 2013 in my organization. Android, thunderbird and IOS not working with autodiscover.
Windows Phone example Lumia worked with autodiscover correctly.
All needed DNS entry and certificate are uploaded to Exchange.
Test on https://testconnectivity.microsoft.com/ ended successfuly.
Can Android and IOS supported autodiscover.
BR/Lukas

Yes i try https://fqdn/Microsoft-Server-ActiveSync instead
I have White page nothing else.
IOS, Android work after manualy configured. Windows Phone work with autodiscover wonderfully
Ok we added public IP address to our CAS Server. Now from Internet i can login to /OWA or /ECP.
What next to do? Change autodiscover.domain.com Record A to point NAT IP address CAS server?
BR/Lukas

Interface names get swapped, but udev rules don't work

I'm using the (apparently nightmarish) broadcom_wl module.
This:
https://wiki.archlinux.org/index.php/Br … every_time
and this:
https://wiki.archlinux.org/index.php/Co … es_varying
don't work. the 10-network.rules file I create is just completely ignored.
Any ideas?
Arch is my distro of choice for my desktop, but it is turning out to be an enormous PITA on my laptop.

hmmm,
NAME
The name, a network interface should be renamed to. Or as a
temporary workaraound, the name a device node should be named.
Usually the kernel provides the defined node name, or even creates
and removes the node before udev even receives any event. Changing
the node name from the kernel's default creates inconsistencies and
is not supported. If the kernel and NAME specify different names,
an error will be logged. Udev is only expected to handle device
node permissions and to create additional symlinks, not to change
kernel-provided device node names. Instead of renaming a device
node, SYMLINK should be used. Symlink names must never conflict
with device node names, it will result in unpredictable behavior.
try creating symlinks instead.

RV180W - Access Rules Don't Work

Hi,
We have a RV180W and the Access Rules will not work. I'm trying to block HTTP and HTTPS services for a specific workstation on our LAN, but the access rules don't seem to be working. I've also tried blocking different services as well as ANY service, but it's not working. I've tried rebooting the router after adjusting settings; I've tried adjusting services from the Port Forwarding menu first; and a couple weeks ago, I upgraded the firmware to version 1.0.2.6 and repeated all the previous steps. Nothing seems to be working. So far the only solution I could come up with is to block the workstation's MAC address altogether, but I don't want that because I still need it to hit the internet for other services.
Thank you,
Ryan

These are the Access Rules I've tried (firmware v1.0.2.6):
Outbound:
Inbound along with the auto added Port Forwarding setting:

Exchange 2013 - Public folder search not working

Hi There,
We have Exchange 2013 install on server 2012 and clients using Outlook 2010 on Windows 7.
Since we have installed the system a search of the public folders always returns no results even if we know the email is there. Any suggestions?
Thank you
Dave

Hi Triumphtech,
Yes, if our Exchange 2003 environment is healthy, it will work.
Please forgive me for the silly clarification. If we used Exchange 2003 and wanted to migrate to Exchange 2013. We must migrate to Exchange 2007/2010 first, then to Exchange 2013.
So please make sure we have moved the public folder successfully first.
And great information from Tarique Noorain.
According to the article, I found some points for your reference:
1. Although a full text search of public folder content is available, public folder content isn't searchable across public folders and the content isn't indexed by Exchange Search.
2. You must use Outlook 2007 or later to access public folders on Exchange 2013 servers.
Feel free to contact me if there is any problem.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Exchange 2013 CU2 OWA Redirection not working

Hi,
I installed Exchange 2013 RTM in existing environment with Exchange 2010 Sp3 in our test environment. After installing Exchange 2013 RTM I checked when I access OWA using Internal URl it redirected to Exchange 2010 CAS server's Internal URL and I was
able to access Exchange 2010 mailbox.
I upgraded to CU2 and now Exchange 2013 internal URl not re-directing it to Exchange 2010 mailbox anymore. I checked all the settings on virtual directories and made sure that FBA authentication is selected. It is a test environment and I just wanted
to test the re-direction in co-existence environment using Internal URL. It should work out of the box but not sure what happened. There was no issue in CU2 instllation.
Exchange 2013 CAS and mailbox roles are on separate servers. Same with Exchange 2010. There is no certificate 3rd party certificate install on CAS servers since it is a test environment.
Not sure what else can I check.
I appreciate if any help I can get.
Thanks,
Regards
Raman
Raman

I have been seeing issue where 2013 OWA was not re-directing to Exchange 2013, as mentioned on top of this thread. After spending days over it.
Finally it resolved for me after doing the following: -
Go to CAS 2010 IIS
OWA directory -> Authentication -> Windows Authentication -> Add provider
Negotiate and NTLM.
Although, now when I click on "Options" once OWA is redirected to 2010. ECP does
not work. It just open up ECP page but no link works not even sign out. I had to click back on the browser's back button go get back to main OWA mail page.
OWA and ECP directory settings are same. I have checked several times.
Thanks,
Raman

Exchange 2013 Transport Rules and Exchange 2007 Decommissioning

Hello,
I recently migrated from Exchange 2010 to Exchange 2013, I do have a few traces of Exchange 2007 in the Active Directory that I would like to completely remove. The Exchange 2007 server failed earlier and wasn't decommissioned properly. I read a few articles
on how to completely remove it from AD, I am still concerned to make the changes in "ADSI Edit".
Here is the error message I receive when creating transport rules in Exchange 2013:
"You are about to create a rule in an organization where Hub Transport servers running Exchange Server 2007
exist. To ensure the rule is applied consistently across all Hub Transport servers in the organization, you must create an equivalent rule from the Exchange Management Console on an Exchange 2007 server."
I also noticed that the version of the rules remain Version: 14.0.0.0 for any new rules that I am creating in Exchange 2013.
I would really appreciate if someone can provide their views and the best practices to remove the traces of Exchange 2007 in AD.

Hi Sathish,
How about the result after using ADSI Edit ?
Best regards,
Niko Cheng
TechNet Community Support

Exchange 2013 / Eudora POP-account not working

I have a MAC (version 9) user who has Eudora (6.2.4). User tries to connect to Exchange 2013 server with POP-account but is unable to get this to work.
I tried to search the web for this answer but couldn't.
I would be happy to know if this is even possible to set up before I spend my time and customer's money on this.
I got Eudora 7.1 working with IMAP on my XP Virtual machine, but I have no way of testing it with MAC-computer.
Edit: I also got POP account working on my XP Virtual machine.

Thanks for your reply. I do not know the specific error message as this happens to one of our end-customer and he has not provided detailed information about this.
User can't update Eudora, because he is using older version of MAC.
I would just like to know if it is even possible to connect Eudora 6.2.4 to Microsoft Exchange 2013.

Mail Rules don't work in Mavericks

It seems with the update to 10.9 Mavericks Mail rules no longer work. My email address was harvested by spamers and I have been using rules to weed throught the 100's of emails that I receive each day.
Russian Brides, Vigra, Learn a new language get moved into the trash when delievered. Now nothing happens.
I just tried to write a new rule and when I clicked the Prefs pannel I got the spinning cursor. After waiting for some time I did a force quit only to find that Mail was not responding.
Anyone have any ideas? I did not see any major changes with Mail and Mavericks so I'm not sure why it's been effected.
MD

You might condider using an Applescript with Mail Rules.
Here's one that I use (Use whitelist to not move to spam):
(Just edit to your junk or whitelist)
Note: The Applescripit must be saved to: ~/Library/Application Scripts/com.apple.mail/
The rule:
The AppleScript:
using terms from application "Mail"
          on perform mail action with messages theMessages
                    tell application "Mail"
                              repeat with theMessage in theMessages
                                        set theSender to (sender of theMessage)
                                        set theReplyto to (reply to of theMessage)
                                        set theSubject to (subject of theMessage)
                                        set theHeader to (all headers of theMessage)
                                        set theContent to (source of theMessage as string)
                                        set theAccount to (account of mailbox of theMessage)
                                        if my blacklist(theSender, theReplyto, theSubject, theHeader, theContent) ¬
                                                  and not my whitelist(theSender, theHeader) then
                                                  my moveToJunkFolder(theMessage, theAccount)
                                        end if
                              end repeat
                    end tell
          end perform mail action with messages
end using terms from
on blacklist(f, r, s, h, c)
          if h contains "X-YahooFilteredBulk" or ¬
                    h contains "Received-SPF: fail" or ¬
                    h contains "Received-SPF: softfail" or ¬
                    h contains "Received-SPF: error" or ¬
                    h contains "Received-SPF: permerror" or ¬
                    h contains "Received-SPF: temperror" or ¬
                    h contains "streamsendbouncer@" or ¬
                    s contains "[Bulk]" or ¬
                    f contains "Vigra.candianmeds.com" or ¬
                    f contains "[email protected]" or ¬
                    f contains ".cz" or ¬
                    r contains ".ma" then
                    return true
     end if
end blacklist
on whitelist(f, h)
          if f contains "aicpa" or ¬
          f contains "eWeek.com" or ¬
                    h contains "from macbook-air.local" then
                    return true
          else
                    return false
          end if
end whitelist
on moveToJunkFolder(m, a)
          tell application "Mail"
                    try
                              set the read status of m to true
                              set the junk mail status of m to true
                              set theAccount to (account of mailbox of m)
                              set mailbox of m to (mailbox "Junk" of a) -- Move to "Junk"
                    end try
          end tell
end moveToJunkFolder

Udev rules don't work

I am on my laptop, where I am trying to write some udev rules.
Firstly, as a test I tried to make a symlink when connecting my ext hd.
$ udevadm info /dev/sdb
E: ID_PART_TABLE_UUID=ea04843c-526e-45bf-9d45-beba1b180285
$ cat /etc/udev/rules.d/61-rules.rules
ENV{ID_PART_TABLE}=="ea04843c-526e-45bf-9d45-beba1b180285" NAME="lilalum"
And well, nothing happens (there is no lilalum in /dev) when I plug in my ext hd.
Secondly, my low bat rule doesn't work.
$ cat /etc/udev/rules.d/99-lowbat.rules
SUBSYSTEM=="power_supply", ATTR{status}=="Discharging", ATTR{capacity}=="10", RUN+="/usr/bin/systemctl suspend"
SUBSYSTEM=="power_supply", ATTR{status}=="Discharging", ATTR{capacity}=="9", RUN+="/usr/bin/systemctl suspend"
SUBSYSTEM=="power_supply", ATTR{status}=="Discharging", ATTR{capacity}=="8", RUN+="/usr/bin/systemctl suspend"
It just doesn't do anything when the battery gets that low, and no the battery did not skip both 10, 9 and 8 percent.
Last edited by Ploppz (2014-05-03 12:41:02)

Ah... thanks, it works now!
One more small issue... I tried writing a test to detect when the charger of my laptop gets plugged in or out, I put it in 61-rules.rules
SUBSYSTEM=="power_supply", RUN+="/usr/bin/touch /home/ploppz/charger"
The battery does send signals to udev:
$ udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
# Plugging out:
KERNEL[944.333548] change /devices/platform/ACPI0003:00/power_supply/AC (power_supply)
UDEV [944.340228] change /devices/platform/ACPI0003:00/power_supply/AC (power_supply)
KERNEL[944.426599] change /devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
UDEV [944.428599] change /devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
KERNEL[944.470830] change /devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
UDEV [944.472781] change /devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
# Plugging in:
KERNEL[950.317263] change /devices/platform/ACPI0003:00/power_supply/AC (power_supply)
KERNEL[950.331752] change /devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
UDEV [950.332023] change /devices/platform/ACPI0003:00/power_supply/AC (power_supply)
KERNEL[950.332576] change /devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
UDEV [950.333609] change /devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
UDEV [950.334891] change /devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
I also tried putting it in 99-lowbat.rules, stilll no luck. I'm also wondering whether udev reads all the rules every time an event happens, or if it caches them such that when I write a rule, I'll have to either wait a bit or do some action to update the rules cache?

AI CS6 Ruler don't work

Dear Madam or Sir,
I work with AI CS6. Now the ruler does't work at all.
If I pull the ruler on the page it disappears. or if it is there I cant mark it and put it aside.
I look forward to hearing from you!
Morteza Ariana

You need to provide system information. In any case, this question is best asked in teh AI forum.
Mylenium

Exchange 2013 - Folders missing when importing PST to archive mailbox

Hello,
I'm having an issue when importing PST files to an Exchange 2013 archive mailbox using the command "New-MailboxImportRequest
test -FilePath '\\server\e$\ArchiveExport\test.pst' -IsArchive -BadItemLimit 5 -ErrorAction Stop"
The import is running without an error and shows the status complete. The size of the archive mailbox is exactly the same like the size
of the PST file!
But when I check the users archive mailbox some folders are missing. It seems that this happens only to default folders like "Inbox"
or "Sent Items". Other folders are visible.
The mailbox import log shows the following:
16.01.15 16:31:56 [server] Merging folder '/Top of Personal Folders/Inbox [Inbox]' into '/Inbox [Inbox]'.
16.01.15 16:31:56 [server] Copying 3 items, 4.789 KB (4,904 bytes). Skipping 0 items, 0 B (0 bytes).
If I start the import process again the log says the following:
16.01.15 16:46:54 [server] Merging folder '/Top of Personal Folders/Inbox [Inbox]' into '/Inbox [Inbox]'.16.01.15
16:46:54 [server] Copying 0 items, 0 B (0 bytes). Skipping 3 items, 4.789 KB (4,904 bytes).
So it seems that the mails are really there but just not visible.
I did some tests:
When I import the PST file directly to the users mailbox (without parameter -IsArchive) I can see all content of the PST file.
When I add the parameter -TargetRootFolder "Testfolder" the whole PST content shows up correctly under that folder.
Can anyone explain this?
Regards

Hi PhilippMair,
Thank you for your question.
If all subfolders were merged, we could use OWA to check if the missing folders is appeared. If we could see missing folders by OWA, I suggest we recreate outlook profile and reset outlook view.
In order to troubleshooting, I suggest we collect the import log to analysis if the subfolder of Inbox or Sent Item is exported.
In my test lab, inbox has three subfolders, there are 123,456,789; when I import PST file, I will see the following log:
1/20/2015 7:32:31 AM [EXCH2-CU1] Merging folder '/Top of Outlook data file/Inbox' into '/Top of Information Store/Inbox'.
1/20/2015 7:32:31 AM [EXCH2-CU1] Copying 18 items, 302.3 KB (309,594 bytes). Skipping 0 items, 0 B (0 bytes).
1/20/2015 7:32:32 AM [EXCH2-CU1] Merging folder '/Top of Outlook data file/Inbox/123' into '/Top of Information Store/Inbox/123'.
1/20/2015 7:32:32 AM [EXCH2-CU1] Copying 5 items, 62.21 KB (63,699 bytes). Skipping 0 items, 0 B (0 bytes).
1/20/2015 7:32:33 AM [EXCH2-CU1] Merging folder '/Top of Outlook data file/Inbox/456' into '/Top of Information Store/Inbox/456'.
1/20/2015 7:32:33 AM [EXCH2-CU1] Copying 1 items, 6.908 KB (7,074 bytes). Skipping 0 items, 0 B (0 bytes).
1/20/2015 7:32:33 AM [EXCH2-CU1] Merging folder '/Top of Outlook data file/Inbox/789' into '/Top of Information Store/Inbox/789'.
1/20/2015 7:32:33 AM [EXCH2-CU1] Copying 1 items, 21.31 KB (21,820 bytes). Skipping 0 items, 0 B (0 bytes).
We could check if there are any subfolder which would not be merged and copied. If your import log has any abnormal, I suggest you send log file to
[email protected] for our troubleshooting.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

Exchange 2013 OWA HTTP 500 error when opening another mailbox

We have an Windows Server 2012 Exchange 2013 server with OWA.
All users can login fine, but when I open another mailbox with my Admin account, having enabled access to that user's mailbox, the URL redirects to /owa/auth/errorfe.aspx?httpCode=500 and shows:
something went wrong
Sorry, we can't get that information right now. Please try again later. If the problem continues, contact your helpdesk
Google won't help me in this instance. Where in the eventlog are OWA events logged?

Hello,
I am joining to the thread opener, however, we do not use exchange server. we are using the Cloud services through Microsoft and as far as I know, the version is 2013 wave 15 (again, through Microsoft's cloud).
when I open the outlook, I can see the shared mailbox just fine.
when I open the office web access, and I search the mailbox through the 'add another mailbox..' It finds it however when I press the add button I get the HTTP 500 error.
when I tried to open a different mailbox (another shared mailbox I gave myself permissions for), it opens just fine.
it seems (from what I can tell) it is this specific shared mailbox that I cannot open through OWA while others I can.
when I try to open the mailbox in question through a different internet browser (Chrome) I get this Error:
NegotiateSecurityContext failed with for host 'db3pr04mb138.eurprd04.prod.outlook.com' with status'LogonDenied'
the error seems to be persistent on this specific mailbox only regardless to what browser I am trying to access with.
I can only assume that the solutions you (Winnie) offered isn't relevant in my case.
thanks in advance for any attempt to help me with this issue.

Security Update for exchange 2013 SP1 (KB3040856) failed mid-way / power problem mailbox server disconnected

While applying todays security update for exchange 2013 (KB3040856) there was a power issue (sad story) and the update was interrupted halfway through. A bunch of service were left deactivated and I beleive I brought them back.
At this point the exchange admin center brings me to the login and when I do login, I get an enable to display page msg after the login.
I have an ActiveSync error log "cannot access the mailbox because the mail box server is disconnected" translated from french.
I also have ASP.NET 4.0 error "MapiExceptionMdbOffline"
What could be the next step in fixing this if it is at all possible ? I am not an expert in cmdlet but can manage if pointed in the right direction.
Any help would be greatly appreciated.
Thank you.

I ran update KB3040856, and it disabled all Exchange services, and a few others besides (IIS and filtering). I ran the test-servicehealth cmdlet and eventually got all the services set to automatic and all running.
This is really a stupid thing for an update to do, what is going on? Exchange 2013 is trouble enough already, we really do not need this sort of agro.

Exchange 2013: Inbox rules don't work on Journal Mailbox

Similar Messages

Maybe you are looking for