Exchange 2013 issues - (new send email Stuck in Drafts not send)

Exchange 2013 issues - (new send email Stuck in Drafts folder not send)

I am also having this issue.
server 2012 VM with exchange 2013. plenty of resources, more than recommended so cannot be a BAck Pressure issue especially as no clients are connected yet.
In the early stages of setup and testing, mail sent to other mailboxes worked fine in outlook 2007 and OWA but after a few issue that developed and are now resolved, any e-mail send within outlook or OWA just goes straight into the drafts folder.
I tried, DNS setting changes under roles, on the server, on DNS server, MX DNS records, increased resources, looked at received connectors, changed and even deleted send connectors as this is not required for internal mail. Tried changing authentication
types but then outlook won't connect to, staying with Basic Auth.
Have not been able to test inbound e-mail as this is going to replace a production server and is not ready, although I could probably simulate a route from another server and push e-mail to it. Will try tomorrow.
I have spent about 20 hours trying to figure this out and made probably 40 changes. Change, test, rollback etc. Been searching through loads of forums and technet sites all with no help.
All services are started, server has been rebooted several times.
It is also an AD server and has both Exchange roles installed. There is no reason why it should not work. This is so frustrating, we don't have these issues with the now end of life Scalix, or MDaemon or Zimbra. Pity the client wanted a Microsoft solution.
To be honest there are not a lot of things that cannot be changed in ECP although there is more under exchange powershell however I am not familiar with all the commands yet. I have resorted to watching training videos even though I am a seasoned IT Pro, although
not so much with exchange it seems.
I have seen many people have this issue on Exchange 2007, 2010 and 2013. Someone must know how to resolve this or find a work around?
So far I have an expensive solution the client has purchased that I cannot get running properly.
Aside from this issue, I really like the new Server 2012 and new Hyper-V.
I was about to install Exchange Server 2013 on a physical machine due to this f#ckin' issue. But a post for the DNS change has saved my life:
http://social.technet.microsoft.com/Forums/en-US/exchangeserverpreview/thread/04c0147b-f4e3-4041-a566-310854e71068/ (rafael9908's answer)
And thanks Jesper Bernle for excellent info provided by your link.

Similar Messages

  • Exchange 2013 issues -new emails appears in Drafts

    Only happens if the users have a 2nd-mailbox attached, a pop3 or imap4 email account and with online mode,
    users are working with outlook 2010/Outlook 2013 Windows 7/ Windows 8 OS+Office fully patched! If we activate cache mode the issue disappears.
      For application compatibility we need to put outlook with online mode activated, thanks for your
    help.

    Hi,
    I saw a similar issue in another thread.
    Please try to remove the 2nd-mailbox from the account & re-add it, and check the result.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email

    Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email        
    I am running Exchange 2013 and I have an end user who connects to it via Outlook 2010. All was going well till he went to forward an email and he noticed that the From button appeared and auto populated the sender's email address.
    I have clicked the Empty Auto Complete List in Outlook's Send messages... still displayed the From tab when forwarding.
    I recreated the profile in outlook... same thing.
    I created the profile with outlook 2013... same thing.
    There is only one user profile setup in Outlook.
    (I know the from tab usually appears when you have multiple profiles setup in Outlook and/or when you configure the "From" tab.)
    I opened the end user's email in Exch 2013's OWA... what was different here was when I clicked on the email and it opened, it did NOT have the Reply or Forward option... and it displayed as a "Draft" email.
    Does anyone have any ideas?

    So are you saying that the from button is filling the option with the original senders address (eg the person who sent the message to your user), or that it's filling in the your users address (in which case I don't understand what the issue is, since
    it IS going from your user)?

  • Migration; Exchange 2003 SP2 to Exchange 2013 on new Domain and DC

    I wasn't prepared for this task, and it was thrown at me to do...  Eyes are bleeding from planning reading and planning, would LOVE any input from you guys.  First time posting, here and have heard great things about these forums.  The Company
    I work for obtained a new client and a network that is in a cluster at the moment, so I'm having to dig through everything and restructure..
    Scenario:
    Old Domain/Server: (To be decommissioned)
    Server 2003 Standard SP2 (Domain: cosco.com; NETBIOS name: coscoex)
    Exchange 2003 SP2 (6.5.7638.1)
    Server is a domain controller and exchange server.
    Migrating to:
    Server 2012 R2 Datacenter (New Domain ad.cosco.com; NETBIOS name: cosco)
    VM #1: Server 2012 R2 Domain Controller at 2012 R2 Functionality 
    VM #2: Server 2012 R2 with Exchange 2013 Standard (Not Yet Installed) Joined to ad.cosco.com domain
    VM #3: Server 2012 R2 with Exchange 2010 (Not Yet Installed) joined to ad.cosco.com domain
    These are probably not ideal conditions, but I have to work with what I'm given.
    Host server (2012 R2) is in work group mode.  Hyper V Installed with a VM of Server 2012 R2 and as a DC at a functionality level of Server 2012 R2.  I had intended starting at a lower functionality level and raising
    it later, but.... ya I forgot to change it.  If needed I can spool up a new DC with a lower functional level.
    DNS, AD and group policy is all jacked up on the 2003 DC so that doesn't matter, All user accounts are going to be created under the new domain.  The concern is migrating the mailboxes from Exchange 2003 on the old domain to
    Exchange 2013 on the new domain.  The client is going to provide CSV of the AD accounts that are still valid (a lot of accounts are no longer used or are from people that no longer with the organization.)
    I had some ideas, but I'm not sure if they will work.  This is something I have never done before (Senior Engineer Quit).
    My thoughts:
    - Establish a two way trust relationship between the two domains.
    - Create two VM's, one with Exchange 2010 and one with Exchange 2013 (They have a 2010 licence that was not used).
    - Create the users on the new domain
    - Use the double hop method from Exchange 2003 > Exchange 2010 > Exchange 2013 
    - Link Exchange accounts to the correct user accounts on the new DC.
    Can this be done cleanly? Am I going about this the correct way?  Any feedback would be GREATLY appreciated.
    Note: We are forced to use ad.cosco.com (Obviously not the actual domain name)

    Hi,
    Base on my experience, your idea is feasible.
    However, before getting started, you should note that Exchange 2010 (with any service pack or update rollups) is not (yet) supported to install on Windows 2012 R2. More details refer to the following link: 
    http://technet.microsoft.com/library/ff728623(v=exchg.150).aspx
    After all the preparations complete, you can refer to the following articles to migration exchange 2003 to 2010, then to 2013:
    Exchange 2003 to 2010 Cross-Forest Migration Step by Step Guide
    Exchange 2010/2007 to 2013 Migration and Co-existence Guide
    Best regards,
    Niko Cheng
    TechNet Community Support

  • Have a new iPad with ios6.  Will not send emails. Addresses are valid  but get notice each time that recipient was rejected by the server.  No help on web site, and Apple's only manual is for previous os version.  We miss Steve Jobs.

    Have a new IPad with IOS6.  Will not send emails.  Addresses are valid but get notice each time that "recipient was rejected by the server."  Apple has apparently neglected to put out a manual with IOS6 and the previous manual has no indication of what to do.  Really miss Steve Jobs.

    Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

  • I can no longer send emails and my drafts folder no longer functions. How do I fix them?

    I am using Windows XP. I have Mozilla Firefox 3.6. My Gmail account no longer can send emails and my Drafts folder is inoperable. I can see, save, discard, or edit anything in Drafts. This is only with my home pc. Any other computer (library, work..) does work. How do I fix this?
    == This happened ==
    Every time Firefox opened
    == about a momth ago

    Please read and begin using Can receive email, but not send email. I had a similar issue with Comcast mail (could receive by not send) and found my answer in this letter. For me it took resetting the outgoing mail and telling the system to use a password when sending outgoing mail. If you need help with that please advise and I'll tell you where to look. 

  • Ever since i upgraded my os to lion, my quickbooks can not send emails to my draft folder in mail.  help!

    ever since i upgraded my os to lion, my quickbooks can not send emails to my draft folder in mail.  help!

    Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
    I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
    You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
    In fact there's a new one for HP at the top of the list just now.
    You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc.

  • When mac email changed to icloud a while ago i lost all my emails and things i have an email subscription to send emails but they do not reach the email that i updated with the same address any help?

    When mac email changed to icloud a while ago i lost all my emails and things i have an email subscription to send emails but they do not reach the email that i updated with the same address any help?

    If you purchased about 2 years ago new I am sure it is a Intel iMac. To find out what type of iMac you have just click on the Apple menu item in the finder and select about this Mac. I would check the ISP mail site and get the correct outgoing mail server info.   

  • My o2 email will receive, but not send on my ipad

    My o2 email will receive, but not send. I've got other email accounts on the ipad & they all work OK. The o2 mail account used to work properly, but I needed to remove the account & since I've put it back on, it won't work on my ipad. Works ok on android mobile phone. I've checked the settings & spoken to o2, but they couldn't solve! It may be since I've joined the cloud? Any advice, gratefully received. Thanks.

    Recheck the settings once again.  There is something wrong.  And it seems to happen to O2 people with some regularity.    Google o2 mail settings and you will get a page with the details.  Pay close attention to the port setting, you may need to change it on the pad, and that may be the problem.

  • TS3899 After IOS7 I can receive email but I can not send email.

    After IOS7 I can receive email but I can not send email.

    try this
    Mail Preferences
    Edit SMTP server list
    Advanced tab
    Authentication - set this password
    Enter your user name and password

  • Iphone 6 email will receive but not send

    Since moving the stored iphone 4 backup to my iphone 6, I've been able to receive email on it but not send.  Should I remove the account and reenter all the account information or ... is there another option?
    Thanks,

    Thanks Spaidr,
    That was part of it.  I did an end-around by setting up an alternate outgoing (send) server which was the same as the primary, identical settings, name, password.  I deselected the primary and used only the secondary.  Reboot as you suggested and Voila!  Something must have been corrupted in the primary.
    Thanks and hope this helps others.  

  • Email will receive but not send after installing os7 on iPhone 4S

    Email will receive but not send after installing os7 on iPhone 4S.   Checked all settings against iPad and second 4s phone and they appear identical.  Other devices work fine.

    Thanks Spaidr,
    That was part of it.  I did an end-around by setting up an alternate outgoing (send) server which was the same as the primary, identical settings, name, password.  I deselected the primary and used only the secondary.  Reboot as you suggested and Voila!  Something must have been corrupted in the primary.
    Thanks and hope this helps others.  

  • When sending email from my ipad, the sender shows as Apple Inc??

    When sending email using my iPad, the sender shows up as Apple Inc. instead of my email address. How can I fix this?

    What does the Description say for the iCloud account on your iPad? (Click on "Settings/iCloud/Account")

  • TS1307 I am holidaying in Auckland using my daughters orcon internet account for sending mail but it will not send. I am sure I am putting in the correct information but it still says orcon offline. I have spent half an hour with Orcon putting in correct

    I am holidaying in Auckland using my daughter's Orcon internet account for sending mail but it will not send. I am sure I am putting in the correct information but it still says mail.orcon.net.nz(Offline). I have spent half an hour with Orcon putting in correct info. They do not know how to help me further and neither does telstra clear, my own internet provider.
    Any advice appreciated.

    On the Mail menubar > Mailbox, make sure Take all accounts online is selected.

  • HT3529 my iphone will only send iMessages. I can not send messages to other types of phones. Does anyone else have this problem?

    my iphone will only send imessages. I can not send messages to other phones.  Has anyone else had this problem?

    Check with your cell provider and make sure your texting plan is properly provisioned.

Maybe you are looking for

  • Changing my MacBook hard drive?

    Hi all, I'm planning on getting a bigger (250gb) internal hard drive for my MacBook (a white one, about 3 years old.) The current drive is a 80gb TOSHIBA MK8034GSX (http://sdd.toshiba.com/main.aspx?Path=StorageSolutions/2.5-inchHardDiskDrives/MK 8034

  • Body and Attachment both in a mail

    Hi, I am working to send a mail from XI. My present scenarion is like this: I am using xslt mapping to generate code for a html page using source and using dumy target. Now I am using module adapter "localejbs/AF_Modules/MessageTransformBean" for get

  • ADD ATTACHMENT TO AUTO MAIL SENT DURING BIDDER CREATION

    HOW TO ADD ATTACHMENT TO AUTO MAIL SENT DURING BIDDER CREATION (CREATE CONTACT PERSON) IN SRM PORTAL..

  • Service Items for Line Type as Service

    I have created a new line type in purchasing as 'Service'. The Value Basis is 'Amount' and Purchasing Basis is 'Services'. Now when I am trying to create a PO for this line type, the Item field is non updateable. I cannot search for any items. Can I

  • Order in smart playlist

    I have a smart plalyst A configured as such: 1) Include all songs from playlist B AND 2) Where rating = (no rating) The songs in playlist B are in a very specific order, how do I preserve the same in playlist A ?