Exchange 2013 Mailbox- Need to see how many sessions of a sinlge mailbox is opened ? Ex: Scenario is 10 helpdesk engineers using single mailbox in different machines

Can we get details of on how many machines a sinle mailbox has been opened in the company in exchange 2013 CU5 envinronmnet
Manju Gowda

Hi,
Since there is no official article for Exchange 2013, we can refer to the 2010 article here:
Exchange Store Limits
http://technet.microsoft.com/en-us/library/ff477612(v=exchg.141).aspx
Thanks,
Simon Wu
TechNet Community Support

Similar Messages

  • I need to see how many times a report is executed in the system.

    Hi,
    I need to know how many times a report and background job is executed in the system.
    How can I know that?
    Thanks for the help!

    hi
      For all reports and transactions execution info is stored in table MONI.
    Read the System log using the Transaction SM21. may be you can find some info here.
    U can use trx STAT, here the system stores the statistic only for a certain period (lst week, last month,...).
    Also try stad transaction.
    Reward points if helpful.
    Regards
    Nilesh

  • How can I see how many total times my apps have been downloaded?

    I have 4 free apps in the iTunes store and I need to see how many times each one has been downloaded total. The Sales and Trends area of itunes connect only gives me weekly graphs that are hard to read and does not give me a total for all time downloads. Thanks in advance.

    Hi lynniewigs,
    This is a common concern among Android and I-phone user, and one of the drawbacks to using a smart phone.  We lose so much privacy. Our phones become cameras into our homes for us to be spied on.
    I don't know what type of phone you have, if it is even a smart phone, but here is an example of an application that you can use to determine which applications are accessing your information and sending it out. 
    Permission Scanner - Android Apps on Google Play
    Google just recently revamp their permissions geared to hide invasive applications that spy and send out your information without your knowledge.  Report says be aware of what your Android app does - CNET
    Please continue to be mindful of the apps you download and the permissions you give. 

  • How come we can no longer see how many responses were made to a question?

    I see that you have changed around the DE a little again. How come we can no longer see how many responses have been made to each question? I found that to be useful when looking through the posts.
    Brian

    Hi Brian,
    Thank you for the feedback that you found the list of the number of responses to a question to be useful. This feature was unintentially not included as part of the site update on January 19th, and I am working with the site developers to see if we can get it reinstated on a future update.
    If you have additional feedback, please feel free to post them here or to e-mail them to me.
    Best Regards,
    Wilbur Shen
    Web Support and Operations
    National Instruments
    [email protected]

  • I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

    I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

    jpqcampos wrote:
    This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
    You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
    And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
    Here are the two tables, Data on the left and Summary on the right. Notes below.
    The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
    Data table:
    D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
    D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
    D3 (and filled down the rest of column D):   =AND(OR(B2,C2),NOT(OR(B3,C3)))
    The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
    Summary table:
    Column A contains labels for the age ranges to be counted.
    Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
    C2 (and filled right to column D, then both filled down to row 5):
        =COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
    Two changes from the previous example:
    COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
    The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
    See note below regarding my earlier formula.
    When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
    Close the reorganize pane, and the 'data entry form' is ready to use.
    To use, enter the age first, then check one of the boxes.
    As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
    Regards,
    Barry
    Note regarding formula in my earlier post:
    The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
    In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
    Fill down to E8.
    Ignore the instructions (in that post) following "Fill down to E8."
    B

  • How to introduce exchange 2013 mailbox server in an existing Exchange 2010 Environment

    Hi All,
    we are planning to install exchange 2013 mailbox server in an Exchange 2010 environment. we have 3 MB servers, 1 CAS 1 HUB which is installed with Exchange 2010 SP3 Enterprise Edition. how to install new exchange server 2013  and i have to add the 2013
    servers in to existing DAG and migrate all mailboxes in to 2013 server. Please advise me from the scratch. also will it be create any impact in my existing setup.
    Thanks, Venkatesh. &quot;Hardwork Never Fails&quot;

    For a step by step follow the deployment assistant
    http://technet.microsoft.com/en-US/exdeploy2013/Checklist?state=2419-W-AAAAAAAAQAAAAAEAAAAAAAA%7e
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Exchange 2010 mailbox prompts for authentication to Exchange 2013 mailbox

    I am in the process of a 2010 to 2013 migration. The only issue I can't seem to manage is an authentication issue with Outlook 2010. My Outlook profile consists of my Exchange 2013 mailbox and a shared mailbox on Exchange 2010. Initially, Outlook was prompting
    for authentication to the Exchange 2010 mailbox. Regardless of whether I entered the correct credentials or simply cancelled the prompt, I still had full access to both mailboxes (including Public Folders on 2010). The authentication prompt was removed with
    the following command:
    Get-OutlookAnywhere -Server my2013exchserver | Set-OutlookAnywhere -InternalClientsRequireSsl $true
    The second issue I now have is the reverse of the above: an Exchange 2010 user is prompted for authentication to an Exchange 2013 mailbox. How do I begin to troubleshoot this problem - should I run the same command (above) on 2010? I don't quite understand
    how Outlook communicates with Exchange but I am thinking there is an incorrect setting on one of the Virtual Directories(?).
    Many thanks.

    Hi Dennis,
    Please open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar –Connection Status to check the connection for your Exchange 2010 mailbox with shared 2013 mailbox. The following example in my test results:
    Please check your connection authentication. We can  run the following command to set your Outlook Anywhere for Exchange 2013:
    Set-OutlookAnywhere -Identity "E15-01\Rpc (Default Web Site)" -InternalClientAuthenticationMethod Ntlm -ExternalClientAuthenticationMethod Basic -ExternalClientsRequireSsl $True -InternalClientsRequireSsl $true
    In Outlook side, please ensure the following settings in Account Settings:
    In Security tab, make sure Always prompt for logon credentials is unchecked and Logon network security is set to Negotiate Authentication.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Performance counters for exchange 2013 mailbox & cas servers?

    what are the Performance counters for exchange 2013 mailbox & cas servers?
     similar to rpc request for troubleshooting exchange slowness, I haven't found any technet article for exchange 2013. 

    Hi,
    Please see this:
    Ask the Perf Guy: Sizing Exchange 2013 Deployments
    http://blogs.technet.com/b/exchange/archive/2013/05/06/ask-the-perf-guy-sizing-exchange-2013-deployments.aspx
    Hope it is what you need.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Exchange 2013 mailbox added to the CAS array

    We are upgrading to Exchange 2013 from Exchange 2010. Following the development guide, we have
    installed the first mailbox server in the Exchange 2010 environment which has 3 Exchange 2010 CAS server
    in the array. When installing the mailbox role, we did not choose the client access role but after
    the installation we can see that the Exchange 2013 Mailbox server is added to the CAS array and yet
    we did not choose the client access role. How does this happen, and to proceed ?

    I see the same thing in my lab:
    Get-ClientAccessArray | FL
    RunspaceId        : 16b992b3-270f-4ae1-a3c3-fa9e2ea73d69
    ExchangeLegacyDN  : /o=Wingtiptoys/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Ou
                        tlook.wingtiptoys.ca
    Fqdn              : Outlook.wingtiptoys.ca
    Site              : wingtiptoys.ca/Configuration/Sites/Default-First-Site-Name
    SiteName          : Default-First-Site-Name
    Members           : {EXCH-2010, EXCH-2013}
    AdminDisplayName  :
    ExchangeVersion   : 0.1 (8.0.535.0)
    Name              : Outlook.wingtiptoys.ca
    DistinguishedName : CN=Outlook.wingtiptoys.ca,CN=Arrays,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administr
                        ative Groups,CN=Wingtiptoys,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=wingtiptoys,DC=ca
    Identity          : Outlook.wingtiptoys.ca
    Guid              : 27968af1-1624-4ff3-85c8-e38e68183afe
    ObjectCategory    : wingtiptoys.ca/Configuration/Schema/ms-Exch-Client-Access-Array-2
    ObjectClass       : {top, server, msExchExchangeServer, msExchClientAccessArray}
    WhenChanged       : 4/12/2014 12:51:18 PM
    WhenCreated       : 4/12/2014 12:51:18 PM
    WhenChangedUTC    : 4/12/2014 7:51:18 PM
    WhenCreatedUTC    : 4/12/2014 7:51:18 PM
    OrganizationId    :
    OriginatingServer : DC-1.wingtiptoys.ca
    IsValid           : True
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Can you see how many calls are waiting in a queue using Supervisor.

    Is there a way to see how many calls are sitting in a particular queue using supervisor or is there and additional software or hardware i need to use or purchase?
    I am using  Contact Center - 5.0(2)SR01_Build053

    Do you see any CSQs listed in the upper left box in the Supervisor?
    If so, when you click on one or the top-level tree item you should see stats relating to CSQs to the right. You may have to scroll that window accross so see some stats.
    Regards
    Aaron

  • Is there an easy way to see how many rows in a table? (selected or unselected)

    Hi all,
    Forgive me if this is a REALLY dumb question but I would love to know if there there is an easy way to to see how many rows there are in a table in InDesign?
    (And I bet I am really going to kick myself when I hear the answer and how simple it probably is..lol !)
    I am working on a huge catalog and am dealing with LOTS of tables...very long tables too at times. I am also doing a lot of copying and pasting back and forth between InDesign and Excel and it would REALLY help if I knew how many rows there are in a table without having to manually count them (TIRESOME!!).
    Also, is there a way to see how many rows I have selected at any one time? It would be SO WONDERFUL if the info box could also provide this information.
    Thank you SO MUCH in advance for your help:))
    Christine
    **UPDATE**
    Oh boy I AM going to kick myself! Why only NOW that I wrote this question did I suddenly notice that the Table palette shows the number of rows and columns? lol.
    Okay, then is there a way to see how many rows I have selected at any given time?

    @Christine – try the following ExtendScript (JavaScript):
    if(app.selection.length === 0
        || !app.selection[0].constructor.name === "Cell"
        || !app.selection[0].constructor.name === "Table"){
        exit(0);
    var sel = app.selection[0];
    if(sel.constructor.name === "Cell"){
        var tableRowLength = sel.parent.rows.everyItem().getElements().length;
    if(sel.constructor.name === "Table"){
        alert("All "+sel.rows.everyItem().getElements().length+" rows selected in current table." );
        exit(0);
    var numberOfRowsSelected = sel.rows.length;
    var indexOfSelectedRows = sel.rows.everyItem().index;
    var startRowSel = indexOfSelectedRows[0]+1;
    var endRowSel = indexOfSelectedRows.length+indexOfSelectedRows[0];
    alert(numberOfRowsSelected +" row(s) selected.\r"+startRowSel+" to "+endRowSel+" out of "+tableRowLength+" of current table.");
    You need not select whole rows, just one or a couple of cells.
    Then run the script.
    An alert message is telling you how many rows belong to the cell range you have selected and:
    which rows of the table are selected…
    A typical message would be:
    6 row(s) selected.
    3 to 8 out of 20 of current table.
    The script does some basic checks of the selection.
    If no cell or table is selected, it will just do nothing…
    Uwe
    Message was edited by: Laubender | Some language cosmetics in the alert message

  • How Can I See How Many Total eMails are in My Inbox?

    Hi,
    My mail boxes on the left side of the window show how many emails have been unread, but I I want to see how many total are in each inbox. Is there a setting that I am missing to be able to see not only the unread, but also total emails?

    Hi BDAqua
    Thanks for the response. I am using a POP account. When I click on a mail box and goto Account Info I have three options:
    1) Messages on server, nothing in there for display
    2) Mailbox Behaviours where I get Notes diplay option, Sent mail option to delete or not, Junk nothing to do with display or Trash, when to delete, nothing on display.
    3) Summary - no options here for any display.
    Am I missing something?
    Thanks
    Brandon

  • Can I see how many people are subscribed to my blog via Live Bookmarks?

    My blog has a "Follow me" button that allows someone to sign up for my rss feed via Live Bookmarks. Is there any way to see how many people are following?

    There is no way to do this with the default RSS feed URL and iTunes, unfortunately. If you really want to see stats on your subscribers and stuff, you will need to translate your RSS feed to something like FeedBurner and then advertise that URL instead of the iWeb RSS.
    Here is an example of my feed:
    http://feeds.feedburner.com/dirtdoog
    There are lots of stats available through FeedBurner... http://www.feedburner.com

  • How see how many process in paralell are running?

    Hi friends!
    I need add a new process chain in the main meta- process chain ( a big one)
    How can I know how many process are running in paralell,
    and how many process still free or available to use,
    between a time range?  (ex: 12:00hs to 12:10hs)
    Thanks in advance!

    Hi
    There are various ways by which you can determine whether you have enough background work process to run something in parallel.
    1. When your process chain is running use transaction code SM66 to see how many background process are being used.
    For background work process you get TYPE as BTC.  Now monitor this screen for some time and you would know what is the maximum number of background process being used during your PC run.   Your Basis team member will be able to tell how what is the total number of background work process in your system.  Now you would be able to understand how many of these process remains free.
    2. You can run SM51 -
    > this will list you number of application servers you have. Double click on each of the server , it will take to to SM50 screen. Top side there will be clock sign. Click on that. This will give you the CPU time of each work process.
    i.e what is the time a wp was using CPU since last system restart.  If you see  for most of the background work process this time is in the range of 0 - 2 seconds , then they are mostly free .
    3. You would also get some of the valueable information from RSBATCH -
    >Background and Parallell Process -->DIsplay Background Process
    Regards
    Anindya
    Edited by: Anindya Bose on Jan 6, 2012 5:58 AM

  • How can I see how many prints I have printed?

    Hello all,
    My office currently uses an HP Officejet Pro 8600 Plus. We are reevaluating our printing needs, and I would like to be able to see how many prints we currently print/have printed on the printer if at all possible in order to see what our needs may be.
    On my old office Ricoh printer, it told us how many colour and how many b&w prints we did per month. If there is a similar function to this for HP please let me know.
    Regards,
    R
    This question was solved.
    View Solution.

    This info is available through the EWS, the Embedded Web Server.  simply go to you IP address of the printer in your web browser.  Select Tools and Printer information
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

Maybe you are looking for