Exchange 2013 storagelimitstatus not showing

I have a problem in Exchange 2013 where the StorageLimitStatus does not show for any user. I found this while trying to diagnose an issue where users were not getting quota warning messages. The only way I found to resolve the quota warning messages
was to migrate the mailboxes to another Database. This did not help with the StorageLimitStatus in the shell.

Hi,
As what Andy says, it is by design that to avoid poor performance in Exchange Server, the default Get-MailboxStatistics cmdlet does not retrieve the mailbox quotas and does not display a value in the
StorageLimitStatus field.
If you want to check the mailbox which is reached to mailbox quota and receive the quota warning, we can try the following command, for example:
Get-MailboxStatistics winnie2 | fl *quota*,*size*
If the TotalItemsSize value is bigger than DatabaseIssueWarningQuota value, this mailbox user would receive the quota warning messages.
If you want to know the mailbox status for the whole database, we can compare the TotalItemSize value with DatabaseIssueWarningQuota value in the following command results:
Get-MailboxStatistics -Database "Mailbox Database 1294421375" | ft displayname,*quota*,*size
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Exchange 2013 does not show AD people pictures

Hello,
Exchange 2013 is configured in hybrid mode with exchange online. Majority of the mailboxes are located in Office 365. Also we have exchange 2007.
When I open mailbox located on exchange 2013 and searching for people- I don't see their pictures.
All pictures are uploaded to AD, also office 365 mailbox owners can see them.
When I check logs on exchange 2013 server, I get 4002 even id:
Process 10556: ProxyWebRequest FederatedCrossForest from S-1-5-21-2000478354-2111687655-1801674531-222614 to
https://outlook.office365.com:443/EWS/Gsiedes..contoso.mail.onmicrosoft.com/Exchange.asmx/WSSecurity failed. Caller SIDs: WSSecurity. The exception returned is Microsoft.Exchange.InfoWorker.Common.Availability.ProxyWebRequestProcessingException: Proxy web
request failed. ---> System.Net.WebException: The request failed with HTTP status 404: Not Found.
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.EndInvoke(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.Proxy.Service.EndGetUserPhoto(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.UserPhotos.UserPhotoApplication.EndProxyWebRequest(ProxyWebRequest proxyWebRequest, QueryList queryList, IService service, IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.ProxyWebRequest.EndInvoke(IAsyncResult asyncResult)
   at Microsoft.Exchange.InfoWorker.Common.Availability.AsyncWebRequest.EndInvokeWithErrorHandling()
   --- End of inner exception stack trace ---
. Name of the server where exception originated: server. Make sure that the Active Directory site/forest that contain the user's mailbox has at least one local Exchange 2010 server running the Availability service. Turn up logging for the Availability service
and test basic network connectivity.
Somehow, instead of querying user settings from AD, exchange contacting with Office 365?
My additional configuration:
1) EWS virtual directory has external URL and Internal URL which is client load balancer. External URL is a URL for Office 365 federation configuration.
2)Autodoscover external DNS records points to the sane URL for EWS (same hostname). Internal dns a record points to exchange 2007 CAS server.
Any ideas?

Hi,
According to your description, I understand that cannot see account picture for hybrid environment with Office 365 when search people.
If I misunderstand your concern, please do not hesitate to let me know.
Do you have configure the Availability service for cross-forest topologies?
If not, please refer to below link to configure:
https://technet.microsoft.com/en-us/library/bb125182(v=exchg.150).aspx
Besides, we have to change the thumbnailPhoto attribute for OAB so that OAB can update with photo.
More details about GAL Photos in Exchange 2010 and Outlook 2010, for your reference:
http://blogs.technet.com/b/exchange/archive/2010/03/10/3409495.aspx
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Exchange 2013 mailboxes not accessible in outlook

Hi,
In the middle of migration from one exchange 2010 server to 2013 server and thought things were going well. However migrated mailboxes to exchange 2013 are not accessible through outlook although they are through OWA most of the time.
I ran test connectivity comandlet on 2013 server on mailboxes and they tested okay.
However when you connect to mailbox it says exchange unavailable.
I have a new ucc certificate on the exchange 2013 server that includes mail.contoso.com and autodiscover.contoso.com. These are both setup to point to 2013 server with split brain dns. The 2010 server has a certificate for mail.contoso.com.
The SC for autodiscovery right now for both the exchange 2010 and 2013 servers are https://mail.contoso.com/autodiscover/autodiscover.xml
When I run outlook connectivity test I get the following failure:
Test Steps
Attempting to ping the MAPI Address Book endpoint with identity: exg:6004.
The attempt to ping the endpoint failed
Additional Details
The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process.
Elapsed Time: 24085 ms
Test Steps
Attempting to ping the MAPI Address Book endpoint with identity: exg:6004.
The attempt to ping the endpoint failed.
<label for="testSelectWizard_ctl12_ctl06_ctl00_ctl07_ctl00_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process.
Elapsed Time: 24085 ms

Hi
Did you migrate your DNS to point to the new Exchange 2013 Server?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Exchange 2010 calendar not showing on outlook 11 Mac

Exchange 2010 calendar not showing on Outlook 11 Mac on my iMac. It shows fine on iPhone and OWA.

Since this question is about a Microsoft product, you might have more luck getting suggestions if you ask in Microsoft's own forums.
Regards.

Exchange Server 2013 Database not showing in ECP after removal of Exchange Server 2010

I recently complete the migration of my Exchange 2010 server to Exchange 2013. I then proceeded to uninstall the 2010 server using setup.com /m:uninstall. At the end of the process I received an error that it did not complete the uninstall.
I checked the server and Exchanged 2010 was removed. When I checked ECP on 2013 it still showed the old 2010 server listed. I used ADSI edit and manually removed the old sever.
Now when I log into 2013 ECP I only see the one serve but when I go into databases, none are listed. I check under the server itself and it shows the database that it is using but it is not listed under the database tab.
If I do a search under the database tab I can find it and adds it to the list. I can then open and view details.
My issue is, after I log out and then back in, I have to run the search to find the database again. In ideas on how to have it show up in the list like it did before I removed the 2010 Exchange server?
Thank you,

Hi,
From your description, I recommend you verify the following things for troubleshooting:
1. Please make sure that AD replication is completely by checking the user object's homeMDB attribute. This value should contain the DN value of the Exchange Server 2013 mailbox database.
2. Wait 30 minutes for the cache on the Exchange Server 2013 Client Access Server to clear or restart the MSExchangeOWAAppPool on the Exchange Server 2013 Client Access Server.
For more information, here is a kb for your reference.
Exchange 2013 Redirects to Exchange 2010 for OWA and ECP
http://support.microsoft.com/kb/2931385
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Exchange 2013 RPC URL shows Error 404 Page Not Found

Hi,
I have been told by Barracuda Support to verify my Exchange 2013 RPC url is working correctly using the following address in a Web Browser:
https://RoH server address/rpc
When I hit this URL I input my credentials and get a Error 404 - Page Not Found.
I dont have any issues with Outlook Anywhere and clients are working fine. The tests come from this article and I am wondering if they are still valid for Exchange 2013 so need some help:
https://techlib.barracuda.com/BMA/EnableRoH
Does anyone else get the 404 error when they try the RPC virtual directory? If I got rpc/rpcproxy.dll that works fine and no issues.
We have Outlook Anywhere configured for NTLM authentication so maybe this is an issue and should be Basic?

I did some digging in the CAS RPC logs and I found this connection attempt:
<snip>
2014-06-18T15:22:40.902Z,CAS-SERVER,RpcHttp,"S:Stage=EndRequest;S:UserName=domain\admin;S:OutlookSessionId=""{1A731432-5548-402F-892A-C9FE489BB78D}"";S:AuthType=Basic;S:Status=404 Not Found;S:HttpVerb=RPC_IN_DATA;S:UriQueryString=?pdc.domain.local:593;S:RequestId=7b1e355e-6448-4ed4-8112-8ab13d88a76f;S:ClientIp=192.168.0.17"
</snip>
As you can see the 404 Not Found is for the request to /rpc. I am wondering if maybe this has changed in Exchange 2013 SP1? Or have I got a bigger issue here?

Exchange 2013 wil NOT send email, same problem as every other exchange 2013 user, typical everything.

I have a brand new dell server 2 netwrok cards. One WAN one LAN connected, each with its respective DNS server added to the card. In OWA the sent email shows in drafts, in outlook it shows in sent items, the user NEVER gets it, internally or externally.
i get all mail from the internet, exactly as expected no problem, all tests show this is working everything checks out fine, server runs great, full blown domain controller with exchange 2013 added. ONLY problem after the 9th install, is still the same, exchange
will NOT send email, everything else works perfectly event log looks great. I do see the DNS error where a DNS server on that network card is not responding crap, which is not true, internet works, al pages everything, NO firewall Bare connect while i get
it to work. I HAVE been over the forums for the last week, tried all done all. i am an MSCE, was an MCSE instructor for 10+ years, Exchange Administrator, Exchange instructor for years, so yea, i am not some newb who has no clue, this DOES NOT WORK. it
came at the CU1 level right out of the box, so i did not install and break it myself Microsoft is now selling this broken. Where do i go what do i do here. Like i said, every other aspect is in perfect order, Just email not sent, not showing in exchange tracking
logs, and that DNS error on the event log, and YES i made the send connector, and the 3 setting it asks, not like that could be wrong, i mean seriously you put in very little info, any wrong entry would be obvious to even a child. SO walk me through what is
going worng, as soon as this server sends an email, i am done building this domain, Please Help here.

Performing Outbound SMTP Test
The outbound SMTP test was successful.
Additional Details
Elapsed Time: 18739 ms.
Test Steps
Attempting reverse DNS lookup for IP address xxx.xxx.xxx.148.
The Microsoft Connectivity Analyzer successfully resolved IP address xxx.xxx.xxx.148 via reverse DNS lookup.
Additional Details
The Microsoft Connectivity Analyzer resolved IP address xxx.xxx.xxx.148 to host wsip-xxx.xxx.xxx.148.ri.ri.cox.net.
Elapsed Time: 187 ms.
Performing Real-Time Black Hole List (RBL) Test
Your IP address wasn't found on any of the block lists selected.
Additional Details
Elapsed Time: 18453 ms.
Test Steps
Checking Block List "SpamHaus Block List (SBL)"
The address isn't on the block list.
Additional Details
IP address xxx.xxx.xxx.148 wasn't found on RBL.
Elapsed Time: 1050 ms.
Checking Block List "SpamHaus Exploits Block List (XBL)"
The address isn't on the block list.
Additional Details
IP address xxx.xxx.xxx.148 wasn't found on RBL.
Elapsed Time: 27 ms.
Checking Block List "SpamHaus Policy Block List (PBL)"
The address isn't on the block list.
Additional Details
IP address xxx.xxx.xxx.148 wasn't found on RBL.
Elapsed Time: 60 ms.
Checking Block List "SpamCop Block List"
The address isn't on the block list.
Additional Details
IP address xxx.xxx.xxx.148 wasn't found on RBL.
Elapsed Time: 90 ms.
Checking Block List "NJABL.ORG Block List"
The address isn't on the block list.
Additional Details
IP address xxx.xxx.xxx.148 wasn't found on RBL.
Elapsed Time: 8161 ms.
Checking Block List "SORBS Block List"
The address isn't on the block list.
Additional Details
IP address xxx.xxx.xxx.148 wasn't found on RBL.
Elapsed Time: 119 ms.
Checking Block List "MSRBL Combined Block List"
The address isn't on the block list.
Additional Details
IP address xxx.xxx.xxx.148 wasn't found on RBL.
Elapsed Time: 61 ms.
Checking Block List "UCEPROTECT Level 1 Block List"
The address isn't on the block list.
Additional Details
IP address xxx.xxx.xxx.148 wasn't found on RBL.
Elapsed Time: 63 ms.
Checking Block List "AHBL Block List"
The address isn't on the block list.
Additional Details
IP address xxx.xxx.xxx.148wasn't found on RBL.
Elapsed Time: 8818 ms.
Performing Sender ID validation.
Sender ID validation was performed successfully.
Additional Details
Elapsed Time: 97 ms.
Test Steps
Attempting to find the SPF record using a DNS TEXT record query.
The Microsoft Connectivity Analyzer wasn't able to find the SPF record.
Additional Details
No records were found.
Elapsed Time: 97 ms.

Exchange 2013 ActiveSync not working

Hello everyone,
We seem to be having problems with our ActiveSync not working anymore. Users with mobile devices can not access their mailboxes. We have checked just about every setting and the IIS logs and can't find an answer to this issue. Microsoft's Remote Connectivity
Analyzer shows the following error which we can not find an answer for anywhere.
An ActiveSync session is being attempted with the server.
    Errors were encountered while testing the Exchange ActiveSync session.
   Test Steps
   Attempting to send the OPTIONS command to the server.
    Testing of the OPTIONS command failed. For more information, see Additional Details.
   Additional Details
    A Web exception occurred because an HTTP 400 - BadRequest response was received from IIS7.
Thanks!

Hi,
Did you ever find a solution to your problem? I have exactly the same problem with a fresh install of exchange 2013. Can access mailboxes via outlook 2010 and owa but can't connect any mobile device. I'm stumped...
a 400 IIS Bad Request error indicates token bloat. Are you proxying to 2010 mailboxes?
The usual fix is to set the following reg keys on the CAS receiving the requests following the first step described in this article that is similar:
http://support.microsoft.com/kb/2491354
Create the following registry keys on all CAS servers (both Exchange Server 2007 CAS servers and Exchange Server 2010 SP1 CAS servers) in the Active Directory site:
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value data: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value date: 16777216
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Exchange 2013: owa page shows up but returns bad request when logged in

Environment: Exchange 2013 CU6 /Windows Server 2012 R2
Just installed the patch yesterday, owa and ecp was working fine after the install but it broke for some reason.
was able to get ecp and powershell running but still cant up owa.
owa website can be accessed online, but once logged in it will throw errors below:
Firefox:bad request
IE:https://mail.domain.com/owa/auth.owa
tried to recreate Virtual directories for ecp and owa but to no avail.
both default website authentication shows basic,forms and fba (for ecp/owa)
checked IIS settings: no redirection details for both http redirect by default didnt touch it as well.
just wondering if anyone experienced the same and how they got it to be resolved, also is there a way to check what is the current authentication method for the backend server
not sure if i am checking it correctly but when i go to IIS>exchange back end, i cannot enable basic and forms as the same time...
thanks in advance

Hi,
From your description, I recommend you use the following cmdlet to change the authentication method of the "owa" virtual directory to Windows authentication.
Set-Owavirtualdirectory -identity "servername\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false -Formsauthentication $false
And then run the following command on both the Client Access and Mailbox servers to restart IIS and check the result.
iisreset /noforce
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Exchange 2013 public folder showing as mail enable no, after migration

I have migrated from 2010 to 2013 and now have a problem with some MailPublicFolders. They can receive mail, but show up in EAC as Mail Enabled "no". If I try to mail enable them they get an odd ball address i.e.
subject?[email protected]
I need them to show as mail enabled in EAC so I can give people SendAs etc.
If I edit the email address, I get an error saying the address already exists.
I think it is from 2003/2010 when alias was set to
[email protected] and now that is not permitted.
Thinking back to when we went from 2003 to 2010, we had to mail disable, then mail enable to get them working.
How can I fix the properties and end up with a mail enabled mailpublicfolder?

Hi,
For this issue, I recommend you delete the public folder object under the Microsoft Exchange System Objects container. Before you delete the public folder object, please note the existing SMTP addresses.
After that, please Mail-enable the
public folder again to check result.
Here is a similar thread for your reference.
https://social.technet.microsoft.com/Forums/en-US/1cce206c-694b-4dc2-8052-39e988fe0dcf/public-folder-not-showing-up-as-mail-enabled-but-its-receiving-email?forum=exchange2010
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Outlook 2013 - Inbox not showing count of unread emails

Ever since moving to Outlook 2013, some of our users are experiencing issues where their inbox does not show the count of unread emails. These user's are working in cached exchange mode. Taking them out of cached exchange mode, deleting OST file and then
putting back in cached exchange mode usually resolves the issue. However, this is only temporary and the problem comes back. We are running Exchange 2010.
Any suggestions on how to resolve this issue for good?
Thanks.

Hi
As per the information and details provided by you, to solve the problem of Outlook 2013, please follow these steps: -
I was also having the same problem. At the top of the
Inbox, I clicked “Unread” (which is new to
Outlook 2013, and different than the Unread, Mail search folder). It showed a message, something like,
“there are more items on the server”, and gave me a link to view the items. When I clicked the link, no items appeared, but my unread mail indicator on my
Inbox went away.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Outlook 2013 client not showing number of unread items

Hi there!
Exchange 2010 SP3 with latest CU.
Outlook 2013 with latest Windows update.
Lately (let's say about 1-3 months) we see that in Outlook 2013 client some folder are not showing the number of unread items.
This thing stopps working randomly and yes if we look under folder properties, option: SHOW NUMBER OF UNREAD ITEMS is enabled.
We believe it's some kind of bug.
Anyone else experiencing the same thing and how to solve it?
with best regards,
bostjanc

Hi,
Does this issue happen to multiple users?
When you view the folder that has unread emails, is there any unread email with the blue "unread" line before the unread email?
Please first try to start Outlook with /cleanviews switch to check if this issue is caused by corrupt view. To do this, press Windows key + R to open the Run command, type
outlook.exe /cleanviews and press Enter.
Besides, if this issue happens again, you can try to close Outlook and then open it in safe mode (hold CTRL key and double click Outlook icon to open it) to check the result.
Hope this helps.
Regards,,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Move Mailboxes from Exchange 2007 to Exchange 2013 (Could not find a valid mailbox migration for esta organization)

Hi all, I am in full migration from Exchange 2007 to Exchange 2013 and everything went correctly.
I have migrated several mailboxes and are working well. But a few days ago, when I try to migrate a mailbox I get the following error and can not migrate:
"Could not find a valid mailbox migration for this organization"
Do you know that you can be?
regards
Microsoft Certified IT Professional Server Administrator

Hi,
From your description, the issue should be related to the migration mailbox. I recommend you check if the following account is existed in ADUC.
Migration.8f3e7716-2011-43e4-96b1-aba62d229136
If this account does not exist, you need to run setup /prepareAD and then enable this migration mailbox to check the result.
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support

After an update sept 2013 camera not showing picture ipad 4 retina display

I updated as requested last night 23rd September 2013 IOS7 on my IPAD4 Retina display. The camera does not show a picture and appears to be locked . Very annoying as I don't want to do a factory reset. Can anyone help a senior citizen please without being too technical. Thanks in anticipation

I did the reset, it's still not working. My iPad is totally new, and I got the same problem.

Exchange 2013 SP1 Not Receiving e-mail

Hello,
Mail flow between Exchange 2010 sp3 & Exchange 2013 SP1 (update Cu5) not working.
Exchange 2013 setup is Exchange 2013 sp1 DVD
Exchange 2010 when sending mail to external it's ok.
Exchange 2010 when sending mail to exchange 2010 users it's ok.
Exchange 2013 when sending mail to External it's ok.
Exchange 2013 when sending mail to exchange 2010 users it's ok.
or
Exchange 2010 when sending mail to exchange 2013 not working
Exchange 2013 when sending mail to Exchange 2013 not working
From internet --> SMTP GW (exh edge) --> Exchange 2010 it's ok
From Internet --> SMTP GW (exh edge) --> Exchange 2013 not working.
organization;
1 AD site and 1 PDC (2012 R2) + 3 DC (1x 2008 R2 + 2 x 2003 Server) (Windows Server 2003 domain fl)
With Exchange 2010 exchange 2013 on the same subnet. Exchange 2010 physical machine, Exchange 2013 physical machine ( eth Microsoft Team Server 2012 R2 )
All server is region setting Turkey
Exchange 2010 error
451 4.7.0 Temporary server error. Please try again later. PRX4
Exchange 2013 error
451 4.4.0 primary target ip address responded with 501 5.5.4 Invalid arguments. attempted failover to alternative host, but that did not succeed. either there are no alternate host, or delivery failed to all alternate hosts. Th
thanks

Hi,
From your description, the Exchange 2013 server can't receive emails internally and externally. I recommend you follow the steps below for troubleshooting:
1. Please restart the Microsoft Exchange Frontend Transport service on CAS and the Microsoft Exchange Transport service on Mailbox and check the result.
2. Please make sure that the authentication on default receive connector is right. Here is the configuration in my environment for your reference:
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Exchange 2013 storagelimitstatus not showing

Similar Messages

Maybe you are looking for