Exchange Push does not push email UNTIL the email is read in Outlook!

I am having a really strange problem. I have an Exchange (work) account that was working great until recently. But in the last two weeks I noticed email stopped arriving on my iPhone. It appears an email is pushed onto my phone only AFTER I have opened the email on Outlook. Then it is immediately pushed onto the phone. Has anyone had a similar problem?
I have tried restarting the phone. I have also tried deleting the account and recreating it. None solved the problem. This is really frustrating.

that's weird. you might want to try a complete restore of your iPhone and set it up as a new phone rather than from a backup.

Similar Messages

After Migration Exchange 2013 does not send mail outside the organization

Dear,
After Migration Exchange 2010 to exchange 2013. We does not send email from the organization but we can received mail from others organization.
Delivery has failed to these recipients or groups:
[email protected] ([email protected]) The server has tried to deliver this message,
without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
Diagnostic information for administrators:
Generating server: OGMAIL.domain.net Receiving server: gmail.com (2607:f8b0:400c:c01::1a)
[email protected] 6/11/2014 10:16:10 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '550 4.4.7 QUEUE.Expired; message expired' 6/11/2014
10:03:49 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover
to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 2607:f8b0:400c:c01::1a:25'
Original message headers:
Received: from OGMAIL.domain.net (192.168.10.12) by ogmail.domain.net
(192.168.10.12) with Microsoft SMTP Server (TLS) id 15.0.847.32; Mon, 9 Jun
2014 16:13:30 +0600
Received: from OGMAIL.domain.net ([::1]) by ogmail.domain.net ([::1]) with
mapi id 15.00.0847.030; Mon, 9 Jun 2014 16:13:30 +0600
From: Administrator <[email protected]>
To: Administrator <[email protected]>
CC: IT.HW-Masudur Rahman-MRT <[email protected]>, "[email protected]"
<[email protected]>
Subject: RE: Migration batch mrtmove has completed successfully.
Thread-Topic: Migration batch mrtmove has completed successfully.
Thread-Index: AQHPd1JEcid9YEi4F0ue6m1039EwR5top+xp
Date: Mon, 9 Jun 2014 10:13:29 +0000
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.10.2]
Content-Type: multipart/alternative;
boundary="_000_6b0d846f503942d99d44be9aff8d6adfogmaildomainnet_"
MIME-Version: 1.0
Queue viewer:
Identity: ogmail\8786\3470333575194
Subject: testing
Internet Message ID: <[email protected]>
From Address: [email protected]
Status: Active
Size (KB): 4
Message Source Name: SMTP:Default OGMAIL
Source IP: 192.168.10.12
SCL: -1
Date Received: 6/23/2014 3:22:49 PM
Expiration Time: 6/25/2014 3:22:49 PM
Last Error:
Queue ID: ogmail\8786
Recipients: [email protected];2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=SendMail,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=net;0
Md. Ramin Hossain

What I notice is Queue expired. The message is not going out.
Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
This error states that It tried to connect to the target system but failed to connect out.
Is Exchange 2013 server added in the firewall rule to send communication over port 25?
Do you have use Front end proxy checkbox checked on the Send connector to internet that was created on 2013 (if created)?
If use front end proxy checkbox is checked, then you need to add permissions for your CAS server's IP in the Firewall for outbound port 25 rule. As it appears that the mail is originating from CAS to the firewall. If that checkbox is not checked, we need
to add the Mailbox server's IP on the outbound rule for port 25.

Exchange 2010 does not send mail outside the organization

Hi,
I have an issue with my Exchange 2010 server and the issue is that I cannot send messages outside the organization. There are lot of posts regarding this issue, but in my case the issue is a little bit different and I didn't find an answer. There is properly
configured send connector, DNS records are OK, external domain is properly configured, all Exchange services are started. The server is running on VM with 4 virtual CPUs, 32GB of RAM. When I send a message to ouside domain the message is not delivered.
I have enabled protocol logging (SMTP logging) and there are no records in the log. What I found is that when I reboot the server, immediately after restart I am able to send an email to outside domain, few minutes later the messages, addressed to the
same outside domain are not being delivered.
The VM is created on LUN, presented from storage Fujitsu Eternus DX90S2, communication between the storage and the host is through iSCSI, all the disks on the storage are 2TB, SATA, 7200rpm.
I can't explain to myself what is going on.

No, unfortunately I do not receive NDR, the queue is empty as well. However, I am receiving a message from Exchange and it states that the message, sent to external domain is not yet delivered and the server will continue to try to deliver it, there is no
reason specified for delaying. The message is:
Generating Server: exchange.domain.local
My_Email_Is_Here
#550 4.4.7 QUEUE.Expired; message expired ##

User does not get email notifications to his outlook

Hi All,
A user has reported that he does not get outlook notifications for corresponding work items in his inbox.
All the settings are in place i.e. correct email address maintained in SU01 as well as in Infotype 0105 subtype 010.
Not really sure why he alone does not get any outlook notifications.
I tried sending a new message manually from SAP Inbox to his external mail id and was successful in this (checked SOST).
What might be wrong? Please suggest.
BR,
Hari

Hello,
By "outlook notifications" I assume you mean emails telling the user he has workitems waiting for him to action.
How are you sending these emails, with Extended Notifications?
In SU01, besides specifying the e-mail address, have you also put "E-mail" in the "Comm. Meth" field?
Sending an email directly to his external email address from his SAP inbox doesn't prove much, SAP has to be able to deduce the email address itself.
Is it just happening for one user? Has it worked before?
regards
Rick Bakker
Hanai Technology

HT5824 when I make revisions to my calendar on my iphone, it does not sync and copy the revisions onto my desktop outlook ....how can I do that ?

how can I copy calendar revisions I make on my iphone to my desktop PC's Outlook ?

Hello bsquared94,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Click the download icon to download that item.
Best of luck,
Mario

"An Exchange Rate Does not Exist" error while creating an item

Hi..
Pre-requisites: RMS is installed without base data
We are trying to create an item in RMS by filling the required information in "Item Maintenance window" and "Supplier details" screen. After this is done when we select the "Retail by Zone" link and the application prompts an error message : "An Exchange Rate Does not Exist", and all the values in "Retail by zone" screen are not populated. How do we ressolve this?
Thanks in Advance
Yamini

Also, make sure that if a currency has a rate entry for example, 01-jul-2010, then make sure that ALL other currencies have a rate entry for 01-jul-2010, even if the rate has not changed for other currencies - a little trick I learned from an Oracle consultant.
Alan

Exchange Push Email Not Working

Hello,
I am at a complete loss. I cannot get exchange push email to work at all on my iPhone 4 (OS 4.1). This is what I have done so far:
- deleted and added account back (many iterations)
- DFU'd phone, added account back
- tried same exchange account on a brand new phone at the apple store, did not work
- worked with exchange provider, it works in their lab on their test iPhone
-worked with Genius bar for 2 hrs, can't get it to work.
Any more ideas???

Please describe in detail how you created the account. Is it specifically created as an Exchange account, or as IMAP? Does it verify during the creation process?
You MAY have a timing problem. See: http://support.apple.com/kb/TS3398

SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

I've a new account on iMac. When composing an email the contact list does not show up on the bar. WWhen I start keying in a name, it comes up with the address. How do I engage the contact list from the email?

I've a new account on iMac. When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email. When I start keying in a name in the email, it comes up with the person's address, which shows it is synced. How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

With the New Message window open, go to the View menu and select "Customize Toolbar...".
In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
That item should be then added to the Toolbar for the New Message window.
Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

HT1688 why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore.

why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore. i can reset password because i doent know what the old one was

Hi lgmmo,
I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
A quick Chat session should get you fixed up.
Please let us know if you have additional questions.
Best,
Sara

TS3694 Hi, My iphone 5 loses the 3G connections everytime i go into tunnel and also to holland park and it does not come back untill i restart the phone? i dont know why is it happening?

Hi, My iphone 5 loses the 3G connections everytime i go into tunnel and also to holland park and it does not come back untill i restart the phone? i dont know why is it happening?

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?

I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?

Go to Mail Preferences
Click on the General tab
Set "Check for New Messages:" to "Every Minute"
Hope this helps

I am now able to receive emails in MAIL, but Yosemite's Mail program does not recognize any of the server's connections that have worked for years! What do I do next?

Yesterday, I was unable to receive emails from Google but was able to receive them from another server - but then receiving them began to work again - but now I am unable to send any mail - Yosemite's Mail program does not recognize any of the server's connections that have worked for years, ! What do I do next?

Mail troubleshooting - Yosemite
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages

Versamail does not hotsync email using MS Exchange on XP 64 bit

Hotsync Manager 7.0.2 does not sync email Outlook 2007 Inbox using Bluetooth sync with Versamail 3.5 Reinstall seem successful, but InstallShield does not close after sync. I have to kill with Task Manager. Error message 1628: Failed to complete installation. tried using XP compatability mode for install, but it didn't work. Using Program Remove Versamail does not uninstall. I had to do it several times and then it finally was removed from program list.
I want to be able to sync my emails and delete or send from my Palm and have it processed in Outlook 2007 using Hotsync.

Hi,
I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
The issue I did describe above, but it was a long explanation.
In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
More explanation I gave above.

When i use the mail on my i phone and outlook simultaneousaly, the outlook does not download emails and says "account already being accessed", i want both to work together, please help.

when i use the mail on my i phone and outlook simultaneousaly, the outlook does not download emails and says "account already being accessed", i want both to work together, please help.

This is the ipod touch forum

Exchange Push does not push email UNTIL the email is read in Outlook!

Similar Messages

Maybe you are looking for