Exchange rate type P not getting picked up while executing KSUB-Plan Assess

Hi,
We have Exchange rate type "P" maintained in SPRO in Maintain versions for the Fiscal Year 2010, but even then when I execute KSUB, it posts with Exchange rate type M.
Has anyone faced this issue? We want it to pick up P and not M.
Regards,
SAPFICO

Hi, set it here IMG-Controlling-Cost Center Accounting-Planning-Basic Settings for Planning-Define versions-Maintain Settings of Version in Controlling Area    then Setting for each f. year , double click on current f.year

Similar Messages

  • ERROR in MIRO : An exchange rate type is not defined for country IN

    Experts:
    When I try to enter the invoice received from the vendor, I am getting the following message.
    An exchange rate type is not defined for country IN
    Message no. FF802
    Can anyone provide me a solution for this?
    Thanks,
    Vijai

    This is the explanation given in note 974619 for the above error message
    Summary
    Symptom
    When you post an FI document, the system issues error message FF 801 or FF 802.
    Other terms
    Plants abroad, FF 801, FF802
    Reason and Prerequisites
    You use the 'Plants abroad' function.
    See Note 882132 for more information about this.
    Solution
    If the 'Plants abroad' function is active, additional fields appear when you maintain the country global parameters (transaction OY01, table T005):
    - Country currency       (Field WAERS)
    - Exchange rate type     (Field KURST)
    - Net discount base      (Field XSKFN)
    - Net tax base           (Field XMWSN)
    You must maintain the fields 'Country currency' and 'Exchange rate type'.
    Otherwise, the system issues error message FF 801 or FF 802.
    thanks
    G. Lakshmipathi

  • Output Message Type MAHN not getting picked up in PO

    Hello Experts
       I have configured customized output type ZMAH (similar to MAHN) for reminder process. When I am creating PO this output type is not getting picked up automatically. If I am maintaining it manually I am able to send message for ME9F (Purchase Order) and ME91F (Reminder) successfully. Upon deremination analysis I am getting this message 502 " Output ignored (requirement 103 not fulfilled) ". Reminder are getting picked up from Purchase Value Key to PO.
    Any help is appreciated.
    Thanks
    Ankit

    Hello Tej
      I have maintained output device but same result.
    Here I am listing all parameters that I have used for configuration can anyone please take a look and let me know if I am missing anything
    Steps for new Message Type for PO Reminder (ZMAH)
    1.     Defined new Table 026 Purchasing Output Determination: Document Type
                                                        (ii) 027 Purchasing Output Determination: Purch. Org./Vendor for EDI
    2.     Defined new access sequence Z515 Access Sequence for Archiving.
    Following are parameters to the Access Sequence
    Access Sequence Number = 1
    Table = 026
    Description = Purchasing Output Determination: Document Type
    Requirement = 103
    Exclusive = Yes (box checked)
    Access Sequence Number = 2
    Table = 027
    Description = Purchasing Output Determination: Purch. Org./Vendor for EDI
    Requirement = 103
    Exclusive = Yes (box checked)
    3.     Maintain Output Type ZMAH for PO
    General Data
    Access Sequence = Z515
    Access to condition (Checked)
    Multiple Issuing (Checked)
    Change Output
    Program = SAPFM06P
    FORM Routine = ENTRY_NEU
    Replacement of Text Symbol
    Program = SAPMM06E
    FORM Routine = TEXT_SYMBOL_REPLACE
    Default Values
    Dispatch Time = Send Immediately (when saving application)
    Transmission Medium = External Send
    Communication Strategy = 0001 (E-mail Document)
    Processing Routines
    Transmission Medium = 5 (External Send)
    Program = SAPFM06P
    Form Routine = ENTRY_NEU
    Form = MEDRUCK
    Partner Roles
    Medium = External Send
    Funct = VN
    Name = Vendor
    4.     Fine-Tuned Control: Purchase Order
    Oprat. = 3
    CType = ZMAH
    Name = Output for Reminder
    Short Text = Urging letter (expediter)/reminder
    Update Print Related Data = Yes (checked)
    5.     Maintain Message Determination Schema: Purchase Order
    Procedure RMBEF1 (Purchase Order)
    Step = 101
    Cntr = 3
    CTyp = ZMAH
    Description = Output for Reminder
    Requirement = 103
    6.     Assign Schema to Purchase Order
    Procedure RMBEF1
    7.     Define Partner Roles for Purchase Order
    Out. = ZMAH
    Med = 5 (External Send)
    Funct = VN
    Name = Output for Reminder
    Name = Vendor
    8.     Test Condition Maintained in MN04 (Master Data)
    Purch. Org. = 0001
    Vendor = 101281
    Partner Funct = VN
    Medium = 5 (External Send)
    Date/Time = 4 Send immediately (when saving application)
    Output Device = LP01
    Cover Page Text = Reminder PO number &EKKO-EBELN&
    Also I have configured Purchasing Value Key, reminders are coming to PO correctly.
    Thanks
    Ankit

  • Force index not getting picked up while running the SQL Quer

    Hi All,
    We are facing an issue with one SQL Query. We have created a custom Index and we are using that index in our query by using the following syntax:
    /*+INDEX(ol XXEXH_ORDER_LINES_N2)*/
    Where
    ol – Table Alias Name
    XXEXH_ORDER_LINES_N2 – Index Name
    But still the index is not getting picked up in the Explain Plan.
    If any one of you have faced a similar issue then please let us know how you had resolved it.
    Appreciate your help.
    DB version:10.2.0.4
    Apps version: 11.5.10.2.0
    Regards,
    Manpreet
    Edited by: 876912 on Aug 3, 2011 2:49 AM

    Hi;
    For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Database or Forum Home » Database » SQL and PL/SQL which you can get more quick response
    Regard
    Helios

  • Force index not getting picked up while running the SQL Query

    Hi All,
    We are facing an issue with one SQL Query. We have created a custom Index and we are using that index in our query by using the following syntax:
    /*+INDEX(ol XXEXH_ORDER_LINES_N2)*/
    Where
    ol – Table Alias Name
    XXEXH_ORDER_LINES_N2 – Index Name
    But still the index is not getting picked up in the Explain Plan.
    If any one of you have faced a similar issue then please let us know how you had resolved it.
    Appreciate your help.
    DB version:10.2.0.4
    Apps version: 11.5.10.2.0
    Thanks.

    The query and plan are given as:
    SELECT
    /*+INDEX(ol XXEXH_ORDER_LINES_N2)*/
    ol.header_id,
    ol.line_id,
    ol.line_type_id,
    ol.flow_status_code,
    ol.last_update_date,
    ol.inventory_item_id,
    ol.ship_from_org_id,
    oh.order_number,
    ttv.NAME,
    msib.segment1,
    msib.item_type,
    fl.segment1 || '-' || fl.segment2 || '-' || fl.segment3 || '-' || fl.segment4 current_loc,
    ship_to.country
    || '-'
    || NVL (ship_to.state, ship_to.province)
    || '-'
    || DECODE (ship_to.county,
    NULL, ship_to.city,
    ship_to.county
    || DECODE (ship_to.country,
    NULL, NULL,
    '-' || ship_to.city
    ) new_loc,
    mmt.transaction_type_id,
    mtt.transaction_type_name,
    DECODE (mil.segment1,
    UPPER ('Field%'), 'PLEASE VALIDATE FIELD LOCATION',
    hou.country
    || '-'
    || DECODE (mil.segment1,
    UPPER ('Field%'), NULL,
    hou.region_2
    || '-'
    || DECODE (mil.segment1,
    UPPER ('Field%'), NULL,
    hou.region_1
    || '-'
    || DECODE (mil.segment1,
    UPPER ('Field%'), NULL,
    hou.town_or_city
    ) rma_loc,
    ship_su.attribute1 oper_loc,
    msib.organization_id --SC#5878
    ,fa.asset_number --SC#5878
    ,fdh.code_combination_id --SC#5878
    ,fa.asset_id parent_asset_id
    FROM fnd_flex_values_vl ffvv,
    fnd_flex_value_sets ffvs,
    mtl_item_locations mil,
    --hr_organization_units_v hou,
    hr_organization_units o,
    -- hr_lookups l,
    -- hr_lookups l2,
    hr_locations hou,
    hr_locations_all_tl lot,
    mtl_transaction_types mtt,
    mtl_material_transactions mmt,
    hz_locations ship_to,
    hz_cust_acct_sites ship_cas,
    hz_cust_site_uses ship_su,
    hz_party_sites ship_ps,
    fa_distribution_history fdh,
    fa_locations fl,
    fa_additions fa,
    mtl_system_items_b msib,
    oe_transaction_types_tl ttv,
    oe_order_headers oh,
    oe_order_lines ol
    WHERE ol.org_id = TO_NUMBER (fnd_profile.VALUE ('ORG_ID')) --SC#5878
    AND ol.flow_status_code = 'CLOSED'
    AND TRUNC(ol.last_update_date) BETWEEN '01-SEP-2010' AND '31-OCT-2010'
    AND ol.header_id = oh.header_id
    AND ol.line_type_id = ttv.transaction_type_id
    AND ol.inventory_item_id = msib.inventory_item_id
    AND ol.ship_from_org_id = msib.organization_id
    AND msib.item_type = 'REN'
    AND SUBSTR(fa.asset_number,1,DECODE(INSTR(fa.asset_number,'-'),0,LENGTH(fa.asset_number),INSTR(fa.asset_number,'-')-1)) = msib.segment1 -- SC#11824 / added for fetching all assets with any suffix/ on 20-JUL-2011 by MPRAKAS
    AND fdh.asset_id(+) = fa.asset_id
    AND fdh.location_id = fl.location_id(+)
    AND fdh.date_ineffective IS NULL
    AND ol.ship_to_org_id = ship_su.site_use_id
    AND ship_su.cust_acct_site_id = ship_cas.cust_acct_site_id
    AND ship_cas.party_site_id = ship_ps.party_site_id
    AND ship_ps.location_id = ship_to.location_id
    AND mmt.inventory_item_id = ol.inventory_item_id --added new condition
    AND mmt.organization_id = ol.ship_from_org_id --added new condition
    AND mmt.trx_source_line_id = ol.line_id
    AND mmt.transaction_quantity > 0
    AND mmt.transaction_type_id = mtt.transaction_type_id(+)
    AND mtt.transaction_type_name(+) = 'RMA Receipt'
    AND o.organization_id(+) = mmt.organization_id
    AND mil.inventory_location_id(+) = mmt.locator_id
    AND ffvs.flex_value_set_name = 'HCCA_AFF_LOCATION' --added new condition
    AND ffvv.flex_value_set_id = ffvs.flex_value_set_id(+)
    AND ffvv.flex_value(+) = ship_su.attribute1
    AND ttv.LANGUAGE = 'US'
    AND (ol.ordered_item_id IS NULL OR ol.ordered_item_id > 0)
    AND NVL (ol.ship_to_org_id, 1) > 0
    AND NVL (hou.location_id, 1) > 0
    AND o.location_id = hou.location_id(+)
    AND NVL (hou.business_group_id, NVL (hr_general.get_business_group_id, -99)) = NVL (hr_general.get_business_group_id, -99)
    AND hou.location_id = lot.location_id
    AND lot.LANGUAGE = USERENV ('LANG')
    AND (fa.asset_id = fa.parent_asset_id OR fa.parent_asset_id IS NULL)
    Plan
    SELECT STATEMENT ALL_ROWSCost: 4,065 Bytes: 958 Cardinality: 2                                                                                                                                   
         125 CONCATENATION                                                                                                                              
              62 NESTED LOOPS OUTER Cost: 3,140 Bytes: 479 Cardinality: 1                                                                                                                         
                   59 FILTER                                                                                                                    
                        58 NESTED LOOPS OUTER Cost: 3,139 Bytes: 441 Cardinality: 1                                                                                                               
                             55 NESTED LOOPS Cost: 3,131 Bytes: 420 Cardinality: 1                                                                                                          
                                  52 NESTED LOOPS OUTER Cost: 3,130 Bytes: 390 Cardinality: 1                                                                                                     
                                       49 NESTED LOOPS OUTER Cost: 3,128 Bytes: 377 Cardinality: 1                                                                                                
                                            46 NESTED LOOPS Cost: 3,127 Bytes: 351 Cardinality: 1                                                                                           
                                                 44 HASH JOIN Cost: 3,126 Bytes: 342 Cardinality: 1                                                                                      
                                                      42 NESTED LOOPS Cost: 2,443 Bytes: 324 Cardinality: 1                                                                                 
                                                           40 NESTED LOOPS Cost: 2,443 Bytes: 315 Cardinality: 1                                                                            
                                                                38 NESTED LOOPS Cost: 2,443 Bytes: 306 Cardinality: 1                                                                       
                                                                     36 NESTED LOOPS Cost: 2,443 Bytes: 298 Cardinality: 1                                                                  
                                                                          33 NESTED LOOPS Cost: 2,442 Bytes: 268 Cardinality: 1                                                             
                                                                               31 NESTED LOOPS Cost: 2,441 Bytes: 259 Cardinality: 1                                                        
                                                                                    28 NESTED LOOPS Cost: 2,438 Bytes: 238 Cardinality: 1                                                   
                                                                                         25 NESTED LOOPS Cost: 2,437 Bytes: 207 Cardinality: 1                                              
                                                                                              22 NESTED LOOPS Cost: 2,436 Bytes: 194 Cardinality: 1                                         
                                                                                                   19 NESTED LOOPS Cost: 2,435 Bytes: 184 Cardinality: 1                                    
                                                                                                        16 NESTED LOOPS Cost: 2,433 Bytes: 168 Cardinality: 1                               
                                                                                                             13 NESTED LOOPS Cost: 2,432 Bytes: 154 Cardinality: 1                          
                                                                                                                  10 NESTED LOOPS Cost: 2,430 Bytes: 126 Cardinality: 1                     
                                                                                                                       7 NESTED LOOPS Cost: 2,427 Bytes: 102 Cardinality: 1                
                                                                                                                            4 NESTED LOOPS Cost: 779 Bytes: 34,028 Cardinality: 724           
                                                                                                                                 2 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUE_SETS Cost: 2 Bytes: 28 Cardinality: 1      
                                                                                                                                      1 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUE_SETS_U2 Cost: 1 Cardinality: 1
                                                                                                                                 3 TABLE ACCESS FULL TABLE AR.HZ_CUST_SITE_USES_ALL Cost: 777 Bytes: 13,756 Cardinality: 724      
                                                                                                                            6 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_LINES_ALL Cost: 3 Bytes: 55 Cardinality: 1           
                                                                                                                                 5 INDEX RANGE SCAN INDEX ONT.OE_ORDER_LINES_N2 Cost: 2 Cardinality: 1      
                                                                                                                       9 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_MATERIAL_TRANSACTIONS Cost: 3 Bytes: 24 Cardinality: 1                
                                                                                                                            8 INDEX RANGE SCAN INDEX INV.MTL_MATERIAL_TRANSACTIONS_N1 Cost: 2 Cardinality: 1           
                                                                                                                  12 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 28 Cardinality: 1                     
                                                                                                                       11 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1                
                                                                                                             15 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCT_SITES_ALL Cost: 1 Bytes: 14 Cardinality: 1                          
                                                                                                                  14 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCT_SITES_U1 Cost: 0 Cardinality: 1                     
                                                                                                        18 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 2 Bytes: 16 Cardinality: 1                               
                                                                                                             17 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U1 Cost: 1 Cardinality: 1                          
                                                                                                   21 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTY_SITES Cost: 1 Bytes: 10 Cardinality: 1                                    
                                                                                                        20 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTY_SITES_U1 Cost: 0 Cardinality: 1                               
                                                                                              24 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 1 Bytes: 13 Cardinality: 1                                         
                                                                                                   23 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ORGANIZATION_UNITS_PK Cost: 0 Cardinality: 1                                    
                                                                                         27 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 1 Bytes: 31 Cardinality: 1                                              
                                                                                              26 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_TRANSACTION_TYPES_TL_U1 Cost: 0 Cardinality: 1                                         
                                                                                    30 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUES Cost: 3 Bytes: 21 Cardinality: 1                                                   
                                                                                         29 INDEX RANGE SCAN INDEX APPLSYS.FND_FLEX_VALUES_N1 Cost: 2 Cardinality: 1                                              
                                                                               32 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUES_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1                                                        
                                                                          35 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_LOCATIONS_ALL Cost: 1 Bytes: 30 Cardinality: 1                                                             
                                                                               34 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_PK Cost: 0 Cardinality: 1                                                        
                                                                     37 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 8 Cardinality: 1                                                                  
                                                                39 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1                                                                       
                                                           41 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1                                                                            
                                                      43 TABLE ACCESS FULL TABLE FA.FA_ADDITIONS_B Cost: 683 Bytes: 670,734 Cardinality: 37,263                                                                                 
                                                 45 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_ADDITIONS_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1                                                                                      
                                            48 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_TRANSACTION_TYPES Cost: 1 Bytes: 26 Cardinality: 1                                                                                           
                                                 47 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_TRANSACTION_TYPES_U1 Cost: 0 Cardinality: 1                                                                                      
                                       51 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_ITEM_LOCATIONS Cost: 2 Bytes: 13 Cardinality: 1                                                                                                
                                            50 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_LOCATIONS_U1 Cost: 1 Cardinality: 1                                                                                           
                                  54 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_LOCATIONS Cost: 1 Bytes: 30 Cardinality: 1                                                                                                     
                                       53 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_LOCATIONS_U1 Cost: 0 Cardinality: 1                                                                                                
                             57 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_DISTRIBUTION_HISTORY Cost: 8 Bytes: 126 Cardinality: 6                                                                                                          
                                  56 INDEX RANGE SCAN INDEX FA.FA_DISTRIBUTION_HISTORY_N2 Cost: 2 Cardinality: 6                                                                                                     
                   61 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_LOCATIONS Cost: 1 Bytes: 38 Cardinality: 1                                                                                                                    
                        60 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_LOCATIONS_U1 Cost: 0 Cardinality: 1                                                                                                               
              124 NESTED LOOPS OUTER Cost: 925 Bytes: 479 Cardinality: 1                                                                                                                         
                   121 FILTER                                                                                                                    
                        120 NESTED LOOPS OUTER Cost: 924 Bytes: 441 Cardinality: 1                                                                                                               
                             117 NESTED LOOPS Cost: 916 Bytes: 420 Cardinality: 1                                                                                                          
                                  115 HASH JOIN Cost: 915 Bytes: 411 Cardinality: 1                                                                                                     
                                       113 NESTED LOOPS OUTER Cost: 231 Bytes: 393 Cardinality: 1                                                                                                
                                            110 NESTED LOOPS OUTER Cost: 229 Bytes: 380 Cardinality: 1                                                                                           
                                                 107 NESTED LOOPS Cost: 228 Bytes: 354 Cardinality: 1                                                                                      
                                                      104 NESTED LOOPS Cost: 225 Bytes: 330 Cardinality: 1                                                                                 
                                                           102 NESTED LOOPS Cost: 224 Bytes: 321 Cardinality: 1                                                                            
                                                                99 NESTED LOOPS Cost: 222 Bytes: 293 Cardinality: 1                                                                       
                                                                     96 NESTED LOOPS Cost: 221 Bytes: 263 Cardinality: 1                                                                  
                                                                          93 NESTED LOOPS Cost: 220 Bytes: 253 Cardinality: 1                                                             
                                                                               90 NESTED LOOPS Cost: 218 Bytes: 237 Cardinality: 1                                                        
                                                                                    87 NESTED LOOPS Cost: 217 Bytes: 223 Cardinality: 1                                                   
                                                                                         84 NESTED LOOPS Cost: 216 Bytes: 192 Cardinality: 1                                              
                                                                                              81 NESTED LOOPS Cost: 210 Bytes: 137 Cardinality: 1                                         
                                                                                                   78 NESTED LOOPS Cost: 28 Bytes: 118 Cardinality: 1                                    
                                                                                                        75 NESTED LOOPS Cost: 22 Bytes: 97 Cardinality: 1                               
                                                                                                             73 NESTED LOOPS Cost: 22 Bytes: 88 Cardinality: 1                          
                                                                                                                  71 NESTED LOOPS Cost: 22 Bytes: 79 Cardinality: 1                     
                                                                                                                       69 NESTED LOOPS Cost: 22 Bytes: 71 Cardinality: 1                
                                                                                                                            66 NESTED LOOPS Cost: 19 Bytes: 58 Cardinality: 1           
                                                                                                                                 64 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUE_SETS Cost: 2 Bytes: 28 Cardinality: 1      
                                                                                                                                      63 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUE_SETS_U2 Cost: 1 Cardinality: 1
                                                                                                                                 65 TABLE ACCESS FULL TABLE HR.HR_LOCATIONS_ALL Cost: 17 Bytes: 30 Cardinality: 1      
                                                                                                                            68 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 3 Bytes: 13 Cardinality: 1           
                                                                                                                                 67 INDEX RANGE SCAN INDEX HR.HR_ORGANIZATION_UNITS_FK3 Cost: 1 Cardinality: 5      
                                                                                                                       70 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 8 Cardinality: 1                
                                                                                                                  72 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1                     
                                                                                                             74 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_LOCATIONS_ALL_TL_PK Cost: 0 Bytes: 9 Cardinality: 1                          
                                                                                                        77 TABLE ACCESS BY INDEX ROWID TABLE APPLSYS.FND_FLEX_VALUES Cost: 6 Bytes: 2,667 Cardinality: 127                               
                                                                                                             76 INDEX RANGE SCAN INDEX APPLSYS.FND_FLEX_VALUES_N2 Cost: 2 Cardinality: 127                          
                                                                                                   80 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_SITE_USES_ALL Cost: 182 Bytes: 19 Cardinality: 1                                    
                                                                                                        79 INDEX RANGE SCAN INDEX APPS.HCCA_HZ_CUST_SITE_USES_ALL_N1 Cost: 1 Cardinality: 489                               
                                                                                              83 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_LINES_ALL Cost: 6 Bytes: 55 Cardinality: 1                                         
                                                                                                   82 INDEX RANGE SCAN INDEX ONT.OE_ORDER_LINES_N2 Cost: 2 Cardinality: 4                                    
                                                                                         86 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 1 Bytes: 31 Cardinality: 1                                              
                                                                                              85 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_TRANSACTION_TYPES_TL_U1 Cost: 0 Cardinality: 1                                         
                                                                                    89 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCT_SITES_ALL Cost: 1 Bytes: 14 Cardinality: 1                                                   
                                                                                         88 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCT_SITES_U1 Cost: 0 Cardinality: 1                                              
                                                                               92 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 2 Bytes: 16 Cardinality: 1                                                        
                                                                                    91 INDEX UNIQUE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U1 Cost: 1 Cardinality: 1                                                   
                                                                          95 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTY_SITES Cost: 1 Bytes: 10 Cardinality: 1                                                             
                                                                               94 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTY_SITES_U1 Cost: 0 Cardinality: 1                                                        
                                                                     98 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_LOCATIONS Cost: 1 Bytes: 30 Cardinality: 1                                                                  
                                                                          97 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_LOCATIONS_U1 Cost: 0 Cardinality: 1                                                             
                                                                101 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 28 Cardinality: 1                                                                       
                                                                     100 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1                                                                  
                                                           103 INDEX UNIQUE SCAN INDEX (UNIQUE) APPLSYS.FND_FLEX_VALUES_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1                                                                            
                                                      106 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_MATERIAL_TRANSACTIONS Cost: 3 Bytes: 24 Cardinality: 1                                                                                 
                                                           105 INDEX RANGE SCAN INDEX INV.MTL_MATERIAL_TRANSACTIONS_N1 Cost: 2 Cardinality: 1                                                                            
                                                 109 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_TRANSACTION_TYPES Cost: 1 Bytes: 26 Cardinality: 1                                                                                      
                                                      108 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_TRANSACTION_TYPES_U1 Cost: 0 Cardinality: 1                                                                                 
                                            112 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_ITEM_LOCATIONS Cost: 2 Bytes: 13 Cardinality: 1                                                                                           
                                                 111 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_LOCATIONS_U1 Cost: 1 Cardinality: 1                                                                                      
                                       114 TABLE ACCESS FULL TABLE FA.FA_ADDITIONS_B Cost: 683 Bytes: 670,734 Cardinality: 37,263                                                                                                
                                  116 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_ADDITIONS_TL_U1 Cost: 1 Bytes: 9 Cardinality: 1                                                                                                     
                             119 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_DISTRIBUTION_HISTORY Cost: 8 Bytes: 126 Cardinality: 6                                                                                                          
                                  118 INDEX RANGE SCAN INDEX FA.FA_DISTRIBUTION_HISTORY_N2 Cost: 2 Cardinality: 6                                                                                                     
                   123 TABLE ACCESS BY INDEX ROWID TABLE FA.FA_LOCATIONS Cost: 1 Bytes: 38 Cardinality: 1                                                                                                                    
                        122 INDEX UNIQUE SCAN INDEX (UNIQUE) FA.FA_LOCATIONS_U1 Cost: 0 Cardinality: 1

  • Exchange rate type M  not  picked in  FB60  foreign currency entry

    Hi
    My  local  currency is   USD.  I   have  defined  exchange rate  for   ' USD  and  EUR   '    for  exchange     type  M and  type  EURX.  
    In  FB60,  system picks  the  exchange rate  defined  for  exc. type EURX,   but   I   want it to  pick  exch. type M.
    Also i   have  set   exch type  M  in  docu  type  KR.   Still  it  does not  pick   exc type M.
    Pl  advise
    Thanks
    kamala

    I am thinking that most likely you have specified EURX as Alt. ERT (alternate exchange rate type) for exchange rate type M for the currency pair USD:EUR in IMG node 'Define Translation Ratios for Currency Translation" (T Code OBBS).  Remove it and retest FB60; it should pick the M rate.

  • Selling Exchange rate type is not picking while billing

    Hi,
    We have maintained Exchange rate type B for selling and the same was assigned in customer master as well as the RV document type. While raising sale order system is picking the B rate from OB08 table, but at the time of billing system is taking the M rate. Where do i set a control to pickup only B rate? Can anybody help me on this.
    govind.

    Hi,
    Ideally at the time of billing, exchange rate type is picked up from the document type (RV in your case). However if the rate is picked up for standard exchange rate type, check if there is user exit being called for exchange rate type.
    Thanks,
    Aman

  • Actual rates (KBK6) is not getting picked up for CPTA (template allocation)

    Hello Experts,
    I am using template allocation for the purpose of overhead calculation. I maintained rate in KP26. It is getting pulled up when I ran standard cost estimate. This is correct
    Now I want to run CPTA (ie. charging overhead at month end) using actual rate. Hence I maintained actual rate in Tcode KBK6. Actual rate is little bit varying with KP26 rates. Hence I want to run CPTA with actual rate.
    When I executed CPTA, I saw that system is picking up KP26 rate and not KBK6 rate. Please help me. How system will pick up KBK6 rate for CPTA.
    --Meena.

    Hi Meena,
    The correct sequence of closing should be:
    1. Template Allocation - CPTA
    This will post activity allocation from CC to your production order at PLAN price.
    2. Calculate Actual Activity Prices - KSII
    This will calculate actual price based on costs posted to CC and activities allocated (try to avoid KBK6 in your testing but rather calculate actual price properly). It will also credit CC but will NOT debit the order.
    3. Revaluate your production order - MFN1
    This will debit the order with the difference between plan and actual activity price.
    Please kindly read SAP Note 156563 - Settlement after activity allocation/revaluation.
    It explains revaluation logic in detail.
    If in your case CPTA generates activity allocation between CC and order (valued at plan price) and KSII calculates new actual activity price, MFN1 has to update the order.
    Regards,
    Szymon

  • Alternate Exchange Rate Type Not Picked while converting from Document Currency to Group Currency

    Hello Gurus,
    We have setup an alternate Exchange Rate type MNB for rate M for the postings happening in Hungary. Local currency is HUF. Group currency is USD.
    If the document currency is, lets say, EUR, latest MNB rate is correctly picked up (EUR to HUF) and postings are correctly converted into local currency (HUF).
    Although, for the same document, when a group currency is being calculated (EUR to USD), exchange rate type M is being picked up. Same happens if  document currency is HUF. Even then, the conversion is based on exchange rate type M.
    Is this a normal SAP behavior? How to prevent/correct this? This is also throwing off balances when we check in FAGLB03 or BSEG values in local and group currencies. In OB22, we have local currency1 and local currency 2 setup with exchange rate type M and we may not want to make any changes there as it is setup at global level.
    Do we need to run any valuations after the fact? if so, how?
    Thank you for your inputs in advance.
    Regards,
    Sagar

    Hi,
    You mentioned that "in OB22, we have local currency1 and local currency 2 setup with exchange rate type M". Then, I'm wondering how MNB is picked up for the first local curr. conversion to HUF? It should be 'M' instead. There must be some settings in your instance for such behavior. Can you check that?
    Actually, Group Curr. conversion happens with the rate defined for 2nd Loc.Curr.in OB22 which is 'M' in your case. Therefore, all the transactions are converted with M instead of MNB.
    Since you can't change OB22 per global co.policy, the exch.rate defined in OBA7 will overrule OB22. However, you've to make sure it's set up for all doc.types which are affected and posted in different curr. than HUF.
    As a workaround, another thought would be to maintain the same conversion rate for both exch.rate types MNB & M, for eg. HUF > USD rate is the same both exch.rate type MNB & M. This way, you ensure all transactions are posted with correct exch.rate irrespective of whatever rate type is used.
    From business, & global org. perspective, I'm sure they are sending the 'M' exch.rates to all their sister concerns monthly, so they would like to consolidate results as per standard rate in their system. Then, why ,as a local company, would you like to fiddle with standard process? It's a management decision, please run them through again before going ahead.
    Thanks,
    Nirav

  • Exchange rate type not defined for country

    Hi All,
    I have noticed an error message during testing of postings using tax codes. The error message nbr is FF802 (Exchange rate type is not defined for country XX). When we are testing postings on accounts for which tax code is ignored (not relevant) it is ok. Could you please let me know where exactly we have settings and how it is related to the tax codes ? I have never seen that connection previously.
    Thanks,
    Points will be rewarded afterwards.
    Tomasz

    Hi Tomasz,
    The exchange rate types are defined at country level in General Settings and the company codes with that country can access that. Normally the exchange rate types are defined as M, P, B and G. M is for average rate and is used in FI,  while P is for planning in CO.
    Regd
    Bharat

  • Error with Exchange rate type

    Hello all,
    While releasing the billing document to accounting, getting the error:
    'An exchange rate type is not defined for country US'.
    In customer master, have maintained Exchange rate as 'M'.
    where do we maintain the exchange rate type for country.
    Thanks
    Gauravjit.

    HI Gauravjit,
    Try this:
    SPRO-F5- General Settings-Currencies-Define Translation ratos for currency translaction
    Reward if it helps
    regards
    Srini

  • Default customized exchange rate type

    Hi friends,
    I have an issue during an implementation.
    I want to use a customized exchange rate type for all forex transactions for only 1 company code in the system having several company codes. Please let me know how do i set the customized exchange rate type as default for a particular company code
    Regards
    Srinivasan

    Hi,
    SAP has defaulted exchange rate type M in the function module. So if exchange rate type is not assigned to a document type, default M is picked.
    In case you want to have a default ex rate type other than M, that too for a particular co.code within the client, you would have to use specific document type to which this new rate type is assigned.
    There is no other way out.
    Hope it resolves your issue.

  • Default Exchange rate type at document type level for parallel currencies

    Hi,
    I have a scenario wherein 2 parallel currencies have been maintained (Grp & index based) against a Co Code and have maintained a default exchange type (Z2) in the Document type settings (OBA7).
    But when I want to post a foreign currency document, system picks Z2 rates for Co Code currency conversion and not for Grp & index based. In fact it picks M rate for these addtional currencies.
    I know that for parallel currencies, the system will always use the exchange rate type defined in transaction OB22 ( "M" rate) which is at Co Code level but I want default exchange rate type Z2 to be picked at Document Type level for all the parallel currencies.
    Please suggest how to archive this.
    Thanks,
    Sam

    Dear Sam,
    The exchange rate type defined in the FI document type (-> field
    exchange rate type in transaction OBA7) is only used for the currency
    translation from transaction/document currency into first local
    currency, not for the currency translation into second local (group)
    currency or for the currency translation into third local currency.
    The exchange rate types for the currency translation into second
    local (group) currency and third local currency are defined in
    transaction OB22.
    Unfortunately there is no option to change the exchange rate of 2nd or
    3rd local currency in our posting transactions. The design doesn't
    regard that requirement. But you have the chance to adjust the parallel
    currencies in OB22 or to change the amounts manually.
    I hope this helps.
    Mauri

  • WT not getting picked up under 3PR

    Hi All
    We are facing an issue wherein the wage type is not getting picked up in 3PR even though it is coming under remuneration statement.
    Can you please advise what could be the reason ?
    Regards
    Neha

    As far i understand system will always considers the retro values when ever any changes are there pertaining to wage type accordingly system will do the posting.
    Either it is a positive arrear or negative arrear system will bring it to the current period you do not want retro calculation delimit the record maintain 78 with effective date on wards.
    Regards
    Venkatesh

  • New exchange rate type instead of M

    Hi,
    I want to assign a new exchange rate type instead of M to my co code.
    Where I can assign it to company code so that at the time of posting any document rate should be pickedup from new exchange rate type and not from M.
    Thanks for reply

    Hi,
    Thanks for your answer.
    I have two company code under one client.
    One co code is for India and another for Dubai.
    In India exchange rates changes  every day but in Dubai it is fixed for long time.
    As of now both co code are accessing same Rate under M
    I want Indian Co Code take M exchange rate type while Dubai CoCode should take some other exchange rate type.
    What could be solution then
    Thank again

Maybe you are looking for

  • Best practice for .war?  Configure and deploy or deploy and configure?

    In Apache Tomcat for example, I can deploy an app, stop the server, reconfigure the app in situ, then start the server again... Is this recommended for deploying Java web apps to Oracle App Server 10g? We currently have a consulting firm that is reco

  • Iphoto 9.1 opens and sticks on spinning wheel

    Hi, I accidentally yesterday trashed my iphoto application. Today i've reloaded the application from my dvd disk and when I open iphoto 9.1 it just has the spinning wheel in the middle of the screen looking to fully open but nothing happens. Please c

  • Recovery of Long Texts with LSMW in CRM

    Hi all, <b>How can I recovered long texts in LSMW, texts with more than 132 characters and with a lot of lines ?</b> I have to recovered Business Partners in CRM with technical IDOC (mesage type CRM_XIF_PARTNER_SAVE), and when the texts are recovered

  • I can't install any adobe programs!!!

    Dear support! My problem is I can't install the Adobe programs from creative cloud. The story: When I try installing the premiere cs6 family the program dowloading, but not extract. Then I wrote a email the hungarian adobe distributor (designshop.hu)

  • Upgrading Snow Leopard?

    Hello: I just purchased a Mac Mini with Snow Leopard.  Is there any specific process/procedure to upgrading to the latest version of Snow Leopard? Thanks.