Exchange server inbox issue

My email inbox wont display. the settings are correct and I can even send email from the phone, as well as see the sent folder. Email wont come in and wont update. Stuck, can anyone help? Our IT, Samsung and calling Verizon have not worked yet. Replaced phone within 2 days, and did factory reset.
NOTHING. anyone have a suggestion? Thank you.

Try changing Session.getDefaultInstance to Session.getInstance.

Similar Messages

Portal integration with Exchange server 2003 issues.

Hello,
We are using NW04s EP 7.0 SP16 and Exchange server 2003. We are trying to perform OWA and Groupware integration. Both the servers are in the same domain.
I have followed all the steps in the notes and documents available there in SDN. There are few issues:
1) The latest KerbMap filter has been configured in Exchange backend server. SAP note 785343 says that the exchange frontend server needs to be configured for anonymous authentication to enable pass-through authentication. But doing this breaks the form based authentication in exchange server, and it also poses security risk when the backend exchange server is behind the firewall. How do we enable pass-through authentication so that the exchange frontend passes the mysapsso2 cookie to the exchange backend server?
2) When I try to create an appointment or try to view the appointments, it gives an error message saying " No logon data found for system Exchange". The Exchange system has been configured for SAP Logon Ticket, and the user mapping fields were left empty. Why should it prompt for user mapping when the logon method is "SAP Logon Ticket"?
There are many documents out there, but none is the latest with clear steps. Can anyone point me in the right direction please?
Thanks,
~Yasin

As far as I remember, when Exchange 2003 is installed on a Domain Controller, it uses the local DC as a GC. You need to set back the 2003 DC as GC and restart it.
I believe, you are aware that demoting/promoting a DC with Exchange server on it is not supported by MS. The best approach is to:
Introduce an Exchange 2010 member server
Move all resources from Exchange 2003 to Exchange 2010
Decommission Exchange 2003
Demote the 2003 DC
Step by Step Screencasts and Video Tutorials

Exchange Server Connection Issues

I set up my work email as an exchange account. I had problems with it connecting so I deleted it and reinstalled it. I still get the ferris wheel icon spinning at the bottom with the message Connecting for minutes at a time. It is better if I use a wifi connection. On other occasions it connects and checks for mail quickly. I am not having this problem with my yahoo or other email accounts.
Short of wiping them all out and reinstalling them I am looking for a solution. Having push on makes the problem worse. I am showing three to four bars I do not think it is a signal problem.
I love the phone but am missing my BES.

JJMinc wrote:
This is usually an issue with the protocol used by Microsoft's Exchange Server. Some company's will follow MS's security reccomendations to a T and the iPhone does not completely meet all of these requirements so the Exchange server will not allow a full connection. I use the iPhone with my company's Exchange Server and it works perfectly fine, but only because we don't 100% follow Microsoft's recommendations on securing the server. I believe there are apps out there that do follow these security protocols so you can still connect.
Thanks, there is a thread on the apple support forum where many others are having this issue. Some are suggesting it is a software bug, if so I hope they fix it soon. I do get my emails, but I find it is better to turn push off.

Trouble Shooting an Exchange Server Connection Issue

I recently encountered a problem when if my phone couldn't connect to the exchange server (MSFT Exchange 2003) it would clear out all of the previously synced mail on the phone. Once it is able to reconnect it will re-download everything, however if this is a normal behavior, and can't I prevent it from resetting all of my mail whenever the phone can't connect for whatever reason the phone becomes a real deal-breaker for me for business applications.
I called AT&T and was told that it was a security feature and there was no way around it. Does anyone know if this is a normal behavior or have any ideas on a way to stop this from occurring? Or should I try calling Apple Care to get someone with a little more knowledge of the way the phone works?
Thanks in advance for any ideas!
Will

You will not lose mail, contacts and calendar if the iPhone cannot connect to the Exchange server. However, you WILL lose data on the phone if the iPhone connects, but the Exchange server is not running. Normally this won't happen if your IT department has even a basic level of competence, and disables incoming requests during Exchange server maintenance. This is a characteristic of ActiveSync, and has nothing to do directly with the iPhone.

Yahoo Mail Plus popping from Exchange Server 2003 Issue

Hi, while I know that this is a little off topic, I really want to try the Yahoo direct push email solution with my iPhone. My problem is that when I configure the Yahoo Mail Plus service to retrieve emails from my corporate exchange server, it fails with a time-out error message. The really confusing part with all of this is that Gmail works perfectly. I know that I am put in the correct parameters, since Gmail has no problem popping my email from the exchange server. Is there anything special I need to have done to make this work? Here's a sample of the information I am using to configure Yahoo to retrieve my email:
Server: mail.corporateserver.com
port #: 995 (secure pop 3)
username: same as my domain name in MS Active Directory
password: same as used to login to MS Active Directory.
Again, this configuration works perfectly on Gmail. If Gmail could push to my iPhone, I would just stick with it. Any ideas?
Thanks,
Jules

Hi, while I know that this is a little off topic, I really want to try the Yahoo direct push email solution with my iPhone. My problem is that when I configure the Yahoo Mail Plus service to retrieve emails from my corporate exchange server, it fails with a time-out error message. The really confusing part with all of this is that Gmail works perfectly. I know that I am put in the correct parameters, since Gmail has no problem popping my email from the exchange server. Is there anything special I need to have done to make this work? Here's a sample of the information I am using to configure Yahoo to retrieve my email:
Server: mail.corporateserver.com
port #: 995 (secure pop 3)
username: same as my domain name in MS Active Directory
password: same as used to login to MS Active Directory.
Again, this configuration works perfectly on Gmail. If Gmail could push to my iPhone, I would just stick with it. Any ideas?
Thanks,
Jules

Any one have idea how to read microsoft exchange server inbox mail

I am trying to build a program which can read the mail from exchange server and i found microsoft exchange server is used MAPI protocol for mail server. I did not found anything which can guide me how to read exchange server mail and what ever i found is, i need to use connector to connect with microsoft exchange server.

The simplest approach is to configure the Exchange server to allow IMAP access. If you can't do that, you'll need to use one of the third party products that use MAPI to access Exchange.

Exchange Server Sync issues...

Hi folks,
I have a problem that has been discussed in abundance right now. How ever, I dare posting it because none of the methods described have helped me to get the exchange stuff running.
I have an iPhone 16 GB 3G with 347 firmware.
An iMac 2,8 Ghz with 10.5.4. and Entourage
A MacBook 1,83 with 10.5.4. and Entourage
An HTC Kaiser with WindowsMobile 6.1 professional
A Dell Vostro1710 with Windows XP Pro SP2
On all those devices I can access and work with the SBS2003 Exchange Server, except for, drums please: the iPhone.
As I am at the same time the admin of our little Network, I would be able to change all settings, but still I can't get it done. Information so far:
OWA: https://mail.mycompany.com/exchange
Server: mail.mycompany.com
e-mail: [email protected]
User: Rene
Password: gofigure
Domain: mycompany.local
No SSL or other certificates employed.
When I set up the account and enter the information above, a window comes up saying that the certificates on this page could not be verified. I accept this window. Then comes the Dialogue asking for the server, which I enter as above. Then the same window comes up again stating that the certificates could not be verified and again I accept.
Then it says "Account verified" and shows me the choices what I would like to sync with Exchange. As of now I would be happy if it only did e-mail (and I don't want to mess up my main calendar on MobileMe), so I unselect the others.
I click on save and switch to the mail app, which is: right, empty...
It makes no difference if I enter the Username with or without the domain as indicated in gray. It just won't work.
What am I missing here? Since there are apparently plenty of users who can get it to work... And I am now trying for the umpteenth time that even my patience is coming to an End.
Cheers,
Rene

Hi guys,
I, too, am NOT a tech guy though I do administrate a bunch of different networks. I've been reading these forums for the past week or so and are also trying to connect my iPhone 1st gen. to our Exchange server. I haven't succeeded yet but if we put our heads together I think we can accomplish this
First, let's get the details on the "table"
My setup is like follows:
- Single server setup (Windows 2003 Standard SP2 / Exchange 2003 SP2)
- OWA enabled (SSL by GoDaddy)
- Active Sync (supposedly working)
- Firewallports opened and NAT configured accordingly
As to my knowledge there seems to be NO "straight-forward" way of configuring an Exchange server, hence all the different setups we've seen on these forums. Something works for some people and some things does not.
Now, for the details we have to put in in the on-screen guide (on the iPhone) the following applies to me (at least I think so):
E-mail: [email protected]
User: domain\loginname *
Password: myPassword
Server-name-field now present and:
Server: company.com (<-- No HTTP or HTTPS) **
+* Domain name is "something.local" but I've read somewhere that we should use the NETBIOS name. Can't back it up though since I forgot the link.
** I've read more than one place that the server name is the "Active Sync Server" and NOT the OWA (like Entourage) or the FQDN like Outlook+
When entering all of these details I STILL have nothing showing up anywhere (in mail, calendar or contacts). But I see no errors or warnings of any kind.
I've tried to add a new virtual directory in IIS and edit the reg-base ((with no luck) - I've tried to setup the correct permissions on the different virtual directories in IIS (and with no luck). I do, however, think THIS is where the "gold" might be - a good place to start. Permissions of the virtual directories on the ISS.
What do you guys think?

Exchange Server 2007 Issue.

error message of "Sending reported error (0x80040115) : The connection to Microsoft Exchange
is unavailable. Outlook must be online or connected to complete this action.
My office use Microsoft Exchange 2007 to send and receive email. it
has the error message of "Sending reported error (0x80040115) : The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.'" Why is it? How can i use my house router to send email.
Further Information . Antivirus Symantec End point protection 12
thanks for your Assistance .

Hi,
From your description, I would like to verify the following things for troubleshooting.
1. Were you able to send and receive emails before?
2. What type of email account is configured in Outlook?
3. Please check if you can send and receive emails using OWA.
Best regards,
Amy Wang
TechNet Community Support

Daily Problems with Mail Synchronizing with Exchange Server

Our office uses Comcast Business Class Service, which uses 2007 Exchange Servers, for internet access and email. I upgraded my MacPro from 10.5.8 to Snow Leopard 10.6.2, using the Upgrade DVD. The upgrade process kept my original Leopard Mail settings, which were using POP. At that time, I had not problems with email.
Unfortunately, awhile ago my Mail Preferences became corrupt, and I had to delete them. Upon relaunching Mail, the application wanted to use the new Autosync method to connect to the Comcast Exchange Server. Using POP was not an option.
I must say that I am less than impressed with the way Mail integrates with Exchange Servers. I have daily problems, and experience these problems multiple times per day. When they happen, they slow my email communication down to a crawl; sometimes for as much as an hour.
Specifically, the problem appears to be with Mail's ability (or inability) to properly synchronize with Exchange Servers. I get he spinning pizza icons next to the two Exchange email accounts I have in my Mailboxes source column. Opening the Activity window shows that the synchronizing process has slowed everything down. This results in not being able to send or receive email until the synchronizing is complete. And as I said, that can sometimes take as long as an hour.
Stopping the process in the Activity window does not resolve the issue. Nor does quitting and relaunching Mail. Because the next time Mail attempts to connect to the Exchange Server, it will try to synchronize yet again. The problem has become so chronic, that I often have to resort to using Webmail while waiting of the synchronizing process to complete.
Incidentally, the mailboxes that are synchronizing are empty! I am meticulous about keeping my Inbox, Sent, Drafts, and Trash mailboxes empty at all times. I do not use To-Do's, Notes, or Calendars of any kind on the Exchange Server, so there is no data to even sync!
Has anyone else experienced this problem and found a fix? Other email accounts I have, which use POP or IMAP, do not have this issue. There does not appear to be away to abandon the Autosync Mail setup and revert back to POP. If there is, I will do it in a heartbeat.
Thanks.

Found a solution that works for me. Delete the problem account that's using AutoDiscover to sync with the exchange server. Before doing that, however, you will want to clear out the Inbox, Sent and even Trash folder for that account, as deleting it will remove the messages that currently reside in those folders. Just simply move them to another folder. You can move them back after re-creating the account.
The second step is to re-create the account. Do this as you would normally, and enter in your name, username and password. THE TRICK: Press and hold the Option key when you click Continue. After Mail connects to the server and verifies your account information, you will then have a pull down menu that will allow you to choose Exchange Server, IMAP and POP. Simply select POP or IMAP, then fill out the rest of the fields.
Viola! No more problematic Exchange Server syncing issues.

Errors between Mail 5 inbox and Server inbox on the Exchange Server

Hi,
I upgraded to Lion recently and it seems that the Mail application struggles with the Exchange interface (although it was already the case for Snow Leopard).
Bottom line there are some email messages in my Mail inbox, which in principle mirrors the inbox on the Exchange server, which are not on the server anymore but still appears in the Inbox. The main problems is if I want to delete such message, I get an error message saying the the "message can nto be moved to Trash". Logically, since it is not on the server it is by extension not in the inbox, but it seems that a duplicate of messages gets stuck in the Mail application. Problem is that now they can;t be moved.
I restarted the application to restart the synchornisation, and still messages appears on my Mac but do not exists even on the server.
Has anyone has tips on how to get rid of these emails?
Thanks in advance

Hello Nirav,
-> This question has to be posted at MAXDB/liveCache forum &
     I saw that you already created the thread for the correct forum::
      Re: Problem in connection between SCM 5.0 and LiveCache(Both on different H
-> As SAP customer you have option to create the SAP ticket,
     we could logon to your system , check the issue & help you with
     the solution.
Thank you and best regards, Natalia Khlopina

Applying retention Policy tags to inbox in Exchange Server 2010

I configured a Journal inbox in Exchange server 2010. I would like to configure a retention policy of 30 days so after a month all emails will be deleted from the Inbox of the Journal account. I configured the retention policy but messages
would never get deleted.

Hi,
Based on the description, you created a retention policy tag, the type was Inbox, added this tag to a retention policy and then applied this policy to the journal mailbox. However, this retention policy didn't work.
For this issue, first, I recommend you check if this tag is disabled. Besides, please check the application log to see if the Managed Folder Assistant has processed this journal mailbox. You can force the Managed Folder Assistant to apply the policy manually
by running the Start-ManagedFolderAssistant command.
If you have checked the above, I suggest you change the Action that retention policy tag performs to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange - Moving messages from server inbox to inbox on my Mac

I am trying to use Mail with my exchange account and it has been tricky. I have found a workaround for a couple of my issues but still have a big one. I try to drag older messages from the server inbox to the "on my mac" inbox so that I can delete them from the server. When I do that I just get this error message: An error occurred while moving messages to mailbox “Inbox — On My Mac”. This happens when I drag the files straight from folder to folder. I also tried right clicking and selecting "Move to" and right clicking and selecting "copy to" but no matter what I try I get the error message and the messages reappear again. The weird thing is sometimes I will move the messages, then it thinks a while, then it gives me the error message, but then when I look in my inbox on my mac a few of the messages did get copied, just not all of them. Other times when I try it nothing copies. I have no idea what the problem is.
I don't know if this helps but I had a similar problem moving items to the trash, sometimes it worked and sometimes it gave me an error and wouldn't move the messages. Mac support was able to figure out that if I happen to try to delete items while it is syncing then I will get an error. Now when I want to delete a big chunk of emails I take the account offline, drag them to the trash and then go back online and that works like a charm. I tried the same with dragging from inbox to inbox with no such luck.
I would appreciate any insight or tricks for this!

In general, the answer is "yes", messages would be removed from the IMAP server if you store them, locally, on your Mac. However, it may also depend on how your particular email account works. I use gmail. When I clean up my inbox, I, regularly, drag emails I wish to keep to archive folders on my mac. While it removes the message from my inbox, it still exists in Google's "All Mail" folder. After I archive, I go into the "All Mail" folder and, then, delete the items in order to ensure permanent removal.

MimeMessage.reply() issue with MS Exchange Server 2007 Emails

I have an application that retrieves emails from an MS Exchange Server 2003 mailbox. The data from each message is read, validated and conditionally loaded to a table. If the message doesn't pass validation, a rejection email is sent back to the sender with an error message and a copy of the email. (We're using Java 1.5. However, I test with both 1.5 and 1.6.)
Also, if the message passes validation, positive notification is sent back to the sender.
Both processes use the method: javax.mail.Message.reply()It's coded as:
MimeMessage reply = (MimeMessage) message.reply(false);My organization is in the process of migrating to MS Exchange Server 2007. We've found that the reply() method no longer finds the sender method, thus unable to create a reply message. The error message we receive is:
javax.mail.SendFailedException: No recipient addresses
     at javax.mail.Transport.send0(Transport.java:110)
     at javax.mail.Transport.send(Transport.java:80)
     at org.ccci.gms.datacollector.DataCollector.sendReply(DataCollector.java:514)
     at org.ccci.gms.datacollector.DataCollector.processMessages(DataCollector.java:162)
     at org.ccci.gms.datacollector.DataCollector.main(DataCollector.java:101)After creating the MimeMessage object from the reply() method, I printed out the email header detail from both 2003 and 2007 messages. You'll note from below that the "To" or recipient address is missing from Server 2007.
MS Exchange 2003 works fine
From: [email protected]
To: [email protected]
Subject: Re: Report
In-Reply-To: <[email protected]>MS Exchange 2007 no longer works
From: [email protected]
Subject: Re: Reports
In-Reply-To: <[email protected]>I know I could just use the "addRecipient()" method to get around this problem. I wanted to know if anyone has encountered this issue. Please share the resolution. Any suggestions will be greatly appreciated.
Thanks,
LaelW

When the original message is accessed using IMAP, the reply method uses the information in the
IMAP ENVELOPE to determine where to send the reply. It first looks for the Reply-To address
in the ENVELOPE, then the From address.
Interestingly, when not using IMAP, the getFrom method returns the Sender header if the From
header is empty. The IMAP-specific code doesn't do that, although perhaps it should.
It would be interesting to compare the ENVELOPE data from the protocol trace in the two cases.
The ENVELOPE data will follow this syntax:
envelope     = "(" env-date SP env-subject SP env-from SP
          env-sender SP env-reply-to SP env-to SP env-cc SP
          env-bcc SP env-in-reply-to SP env-message-id ")"
So it's the first three address fields after the Subject that are relevant. If the From and Reply-To
fields are NIL, but the Sender field has a valid address, let me know. I should probably fix the
IMAP provider to fall back to the Sender field if the From field is missing.

HELP - Exchange Server 2007 Transport Rule Issue

Hi all,
sorry if here is not the place to put my question but I did not find another forum, so if anyone can help me I appreciate.
- I have an Exchange Server 2007 SP3 environment with 1 MBX Server and 3 CAS/HUB Servers.
- I have created a Transport Rule that said:
"all emails that have @test.com in BCC field are dropped off except one group can send" .
The issue is the rule doesn´t work.
Anyone can help me, please?
Thanks in advance.
Luiz

The Exchange previous versions forums are here:
http://social.technet.microsoft.com/Forums/en-US/category/exchangeserverlegacy
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Backup Issue of exchange server 2007 mailbox store

Dears
Exchange server 2007 with CCR clustering
I have got a problem with the backup of one of my mailbox store. Its going till the last and giveing the final error as follows:-
V-79-57344-65247 - A failure occurred reading an object.
Also the warning as follows:-
Backup- \\mailserver.domain\Microsoft Information Store\First Storage Group
WARNING: "\\mailserver.domain\Microsoft Information Store\First Storage Group\Database" is a corrupt file. This file cannot verify.
Backup V-79-57344-34108 - An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly resynchronized with the original volumes.
Does it mean my information store is really a corrupted file. It has been properly monted and logs are genearting.
Even when I checked the last full backedup log file from the management shell it clearly shows the backing up is properly happened on the log files.
When I checked the event log of Exchnage server I can see these logs:-
Event ID 401, 403 errors
The size of the problem store is 308 GB.
One of the other store with 46 GB is backing up without any issue

Hi,
If you have a space issue with the Exchange server, you can upgrade drives on active node and passive node one by one. It is not recommended to upgrade them at the same time.
For more information about upgrading Exchange 2007 CCR active node or passive node, here are some helpful threads for your reference.
Upgrade hard drives on passive node. Process and procedure
http://social.technet.microsoft.com/Forums/exchange/en-US/08b9e893-87c9-48c3-bab2-91027cc09949/upgrade-hard-drives-on-passive-node-process-and-procedure?forum=exchangesvravailabilityandisasterrecoverylegacy
Upgrading hard drives in exchange server
http://social.technet.microsoft.com/Forums/exchange/en-US/0e4514f9-76da-44d2-9dec-a3be5add79b1/upgrading-hard-drives-in-exchange-server?forum=exchangesvravailabilityandisasterrecoverylegacy
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Exchange server inbox issue

Similar Messages

Maybe you are looking for