Excute workflow from step 3 by abap code

hI,
i want to excute workflow from step 3 by abap program. My workflow send mail from approval at 3 step.When approval is made then it will go for further processing.
please give me code if possible.
Regards,
Gurprit
Message was edited by:
GURPRIT BHATIA
Message was edited by:
GURPRIT BHATIA

hi Guprit,
based on my experience you must trace why your workflow is wait.
is it because the workflow is waiting for certain events ?
or is it because of an error occured in the step 3 of the workflow ?
if the worfklow is waiting for certain events, you can force it to continue with triggering the events that workflow wait ( transaction code SWUE )
if an error occured in the step 3 of the workflow, you need to trace it what kind of error .... and for certain case after you fix the error you can continue the workflow by using tcode SWPR and restart the workflow after error.
but unfortunatelly based on my experience, some times the workflow just stuck in the middle of the process and no error occured
it this happens, ussually i re-triggered the workflow
hopes it helps
cheers

Similar Messages

What are the steps to optimise ABAP code

What are the steps to optimise ABAP code, that is how to increase the performance of a code?

Hi
Welcome to SDN forum
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
ABAP performance depends upon various factors and in devicded in three parts:
1. Database
2. ABAP
3. System
Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
u can get an interactive grap in SE30 regarding this with a file.
also if u find runtime of parts of codes then use :
Switch on RTA Dynamically within ABAP Code
*To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
*To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2 Avoid for all entries in JOINS
3 Try to avoid joins and use FOR ALL ENTRIES.
4 Try to restrict the joins to 1 level only ie only for 2 tables
5 Avoid using Select *.
6 Avoid having multiple Selects from the same table in the same object.
7 Try to minimize the number of variables to save memory.
8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9 Avoid creation of index as far as possible
10 Avoid operators like <>, > , < & like % in where clause conditions
11 Avoid select/select single statements in loops.
12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14 Avoid using ORDER BY in selects
15 Avoid Nested Selects
16 Avoid Nested Loops of Internal Tables
17 Try to use FIELD SYMBOLS.
18 Try to avoid into Corresponding Fields of
19 Avoid using Select Distinct, Use DELETE ADJACENT.
<b>Reward points for useful Answers</b>
Regards
Anji

How to read a mail from sap inbox thru abap code?

how to read a mail from sap INBOX thru abap code? can anyone tell me the technical approach? I NEED TO READ A MAIL and then need to pass the parameters to a bapi.
Message was edited by:
shahid mohammed syed

Hi SSM,
Did you manage to have your program working? I also have same requirement. I tried standard FM and BAPI but I always encounter authorization error when I tried accessing other user's mail. Thanks.
Regards,
Ryan

Starting existing workflow from web dynpro application (ABAP)

Hi experts,
    I am working on web dynpro application from which when I click on a button an existing workflow should trigger. This will be used in portal replacing existing iview with jsp. I did lot of reading on SDN maybe too much that I am confused how to get started. Here is what I have currently.
We have an existing workflow that sends an approval email to manager when ever some unit information changes. In current functionality, workflow is triggered by event which is linked to workflow in transaction "swetypv". We defined scenario in "qisrscenario" that contains all elements to populate workflow container. The methods to get data into workflow container, send email etc are all written in business object methods. We have a class that implements standard SAP BADI "IF_EX_QISR1"(IF_EX_QISR1~SCENARIO_PROCESS_USER_COMMAND method) that probably has all logic. In current functionality when the workflow gets created it sends notification number back to portal jsp page that triggered the workflow on button click. Users look at notification number in iqs23 for workflow log, PCR form data etc. and I need that functionality too. Now I am confused where I should start so that I can use ew web dynpro applciation instead of jsp iview but want all the functionality that we currently have. How can I start workflow and get notification number back to web dynpro so that I can display that to user? The approving manager goes to UWL to approve, reject the workitem and workflow then finishes.
Any help will be greatly appreciated.
Thanks.
Mithun

Hi.,
Using FM SAP_WAPI_CREATE_EVENT You can Achieve this., try the below piece of code.,
DATA: OBJECT_TYPE TYPE SWR_STRUCT-OBJECT_TYP VALUE 'ZBUS333',   " Enter Your Business Object here
OBJECT_KEY TYPE SWR_STRUCT-OBJECT_KEY,
EVENT TYPE SWR_STRUCT-EVENT VALUE 'FIRE'.     " Enter Your Event here
   DATA: lt_cont TYPE STANDARD TABLE OF swr_cont,
         ls_cont TYPE swr_cont.
       ls_cont-element = 'NAME'.       " To Pass Values to business Object you append to container
       ls_cont-value   = lv_name.
       APPEND ls_cont to lt_cont.
       ls_cont-element = 'ID'.
       ls_cont-value   = lv_id.
       APPEND ls_cont to lt_cont.
      CALL FUNCTION 'SAP_WAPI_CREATE_EVENT'
        EXPORTING
          OBJECT_TYPE             = OBJECT_TYPE
          OBJECT_KEY              = OBJECT_KEY
          EVENT                        = EVENT
         COMMIT_WORK             = 'X'
         EVENT_LANGUAGE          = SY-LANGU
         LANGUAGE                = SY-LANGU
         USER                    = SY-UNAME
*         IFS_XML_CONTAINER       =
*       IMPORTING
*         RETURN_CODE             =
*         EVENT_ID                =
       TABLES
         INPUT_CONTAINER         = lt_cont
*         MESSAGE_LINES           =
*         MESSAGE_STRUCT          =
hope this helps u.,
Thanks & Regards,
Kiran

Start Workflow from particular Step and assign to particular group of members

Hi
We are working on workflow using CQ 5.5.
Is it possible start workflow from particular Step and assign this workflow to particular group of members dynamically(Using Process Step).
Workflow Name : Single Page Workflow
                    Start
                        |
                    Step 1
                        |
                    Step 2
                        |
                    Step 3
                        |
                    Step 4
                        |
                    Step 5
                        |
                    Step 6 (Process Step)
                        |
                     End
In Step 6 , we will start workflow for list pages dynamically , for that we written code as
public class PublishTranslation implements WorkflowProcess{
    public void execute(WorkItem item, WorkflowSession wfsession, MetaDataMap metadata)
            throws WorkflowException {
           WorkflowModel model = wfsession.getModel(item.getWorkflow().getWorkflowModel().getId());
           WorkflowData wfdata= wfsession.newWorkflowData("JCR_PATH",pagePath[i]);
           wfsession.startWorkflow(model, wfdata);
This code starting workflow from step 1.
I need help on
1. How can i start workflow from step 2 or 3 ?
2. How can i assign this workflow to group members ?
Thanks & Regards

Hello Ravindra,
Logically it shouldn't allow you to do that and same happening because start workflow call on model will always trigger the workflow from starting point (means the very first step after start component in workflow design)
To achieve this you have other ways, i would suggest to try below if it works for you.
1. Instead of creating a new workflow just branch it programmaticaly and route back to previous step
      List<Route> routes=wfsession.getBackRoutes(item);
                 Route route=routes.get(WHAT_EVER_STEP);
                 wfsession.complete(item, route);
2. Create a new workflow model which starts from second step and using code get access of that workflow
     wfsession.getAllWorkflows();
for delegation as mentioned by Yogesh, you can try wfsession.delegateWorkItem(WorkItem item, Authorizable participant)
Thanks,
Pawan

Trigger a workflow from ABAP Webdynpro

My Scenario:
Step 1: When a user hits the SAVE button on the webdynpro form, check if that data is consistent only and trigger a message(I have a BAPI to handle this check).
Step 2: If the data is consistent, then trigger a workflow to send an alert to an agent along with the data user entered on the form.
Step 3: AGENT shall review the data(Same form from step 1 should appear here) and will have the option to SUBMIT / POST or REJECT. If SUBMITTED, data will be posted to R/3(I have a 2nd BAPI to handle this). If REJECTED, send an alert back to the USER who entered data in step 1.
I checked lots of threads from the forum, none gave me a complete idea. Can any one give me a good documentation to trigger workflow from webdynpro to handle my requirement.
I am new to webdynpro.
I checked this blogs & articles also...
/people/ginger.gatling/blog/2005/12/14/create-new-uis-for-existing-workflow-tasks-with-abap-web-dynpro-and-universal-worklist
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/wdjava%20archive/using%20web%20dynpro%20java%20and%20web%20dynpro%20abap%20applications%20in%20universal%20work%20list.pdf
Thanks a lot in advance.
Best Regards,
Kiran

Hello Kiran,
I slightly misunderstood you requirement earlier. But if I am not wrong this time, here is what you need to do:
1) The Web dynpro form that you are creating is only for data entry purpose. But the agent who is going to review the data will need an access to this form. So this means that you need to save the content of this form to the database and provide a URL in the workflow workitem which the agent can use to open the web dynpro application with the form data on it.
2) To access the correct form, you need to save the form data in a Z-table with a GUID attached to it. Generate this GUID using GUID_CREATE function module. In the window controller of the Web dynpro component, there will be a handleDefault method where you can read the parameter'GUID' from the incoming request and use it to read the form data from the database to display the form.
3) You can use Object Oriented programming approach for creating Workflow. Check the following article to learn how to do that:
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0409e6c-d213-2d10-3cb6-c12d417626c1?quicklink=index&overridelayout=true]
4) Create a Z-class and use this class as object type in your workflow (instead of BOR object).
5) In the constructor of this class, pass a parameter GUID, which would be passed when you create an object of this class in the Web Dynpro forms "OnActionSave" method.
6) Create a method in this class which will do the task of calling the BAPI to save the Acct Document. This method will be used in a Background task in a workflow step (after the agent approves the workitem).
7) Create a method in the class which generates the URL to the webdynpro application with the GUID passed as parameter.
(for eg: http://urltoserver/appname?GUID='guidoftheform').
8) In your save method of WD application, call the method to raise event that triggers the workflow (using OO)
lv_guid    = '04AE4546EED7101DE10000000A424026'. "use GUID_CREATE
       lv_objtype = 'ZWFCLASS'. " create a Z-class of your own
   TRY.
      CALL METHOD cl_swf_evt_event=>raise
        EXPORTING
          im_objcateg = 'CL'
          im_objtype = lv_objtype
          im_event    = 'FORM_APPROVE' " this event needs to be defined in ZWFCLASS
          im_objkey   = lv_guid.
    CATCH: cx_swf_evt_exception.
ENDTRY.
Please read through the workflow using Object Oriented document in the URL that I have mentioned above before you read through these instructions.
There would be a way to do this using BOR objects, but this is the way that I have tried and tested to use trigger workflows from Web dynpro applications.
Best Regards,
Gaurav
Edited by: Gaurav Salkar on Apr 6, 2010 6:13 PM

Q: ABAP code from db to memory decreases performance?

Hi Gurus,
We have a problem with some ABAP code (a start routine in a BI load). Basically the situation is: we had some code that builds a hierarchy (and inserts into hierarchy table) based on an attribute load, which worked fine but was to slow.
As we do not need the hierarchy anymore we changed the code to only build the hierarchy in memory (the reason why we need it at all is because building this is the only way we can ensure to load the right records in the attribute load) and now, it is sloweru2026.which we do not understand.
In general we have replaced:
SELECT SINGLE * FROM /BIC/HZTVFKORG INTO nodelast
WHERE nodeid = lastnode2.
With:
READ TABLE VirtHierarchy INTO nodelast
WITH KEY nodeid = lastnode2.
And replaced:
UPDATE /BIC/HZTVFKORG FROM nodelast.
With:
MODIFY TABLE VirtHierarchy FROM nodelast.
And replaced:
INSERT INTO /BIC/HZTVFKORG VALUES node.
With:
APPEND node TO VirtHierarchy.
As we see it, this should increase the performance of the start routine and the load (it takes several hours for just 50000 records), but it is actually running slower now...
Does anybody have any idea about why this is not improving performance?
Thank you in advance,
Mikael

Dear Mikael Kilaker,
There are few reason:
1. Data overload in memory.
, if you try to execute
SELECT SINGLE * FROM /BIC/HZTVFKORG INTO nodelast
WHERE nodeid = lastnode2.
With:
READ TABLE VirtHierarchy INTO nodelast
WITH KEY nodeid = lastnode2.
And replaced:
UPDATE /BIC/HZTVFKORG FROM nodelast.
With:
MODIFY TABLE VirtHierarchy FROM nodelast.
And replaced:
INSERT INTO /BIC/HZTVFKORG VALUES node.
With:
APPEND node TO VirtHierarchy.
inside any loop conditions, this approach will make the system slow because it will load entire table into memory then system still need to cater space for selected value thus make system not really effective when you execute large volume of data.
2. Unsorted data.
It is really great practice if you sort nodelast. It is extra steps but the effect greatly decreased response time when system manipulating sorted data in the internal table.
3. Use binary search in READ table.
Try to use this code
READ TABLE VirtHierarchy INTO nodelast
WITH KEY nodeid = lastnode2 BINARY SEARCH.
this practice also will increase performance when you execute large data inside internal table.
Do reward points if this helps you

Trigger an workflow from webdynpro abap.

hai
gurus!
iam new to webdynpro.iam femilier with workflow . can anybody explain me with an clear example, how to trigger an workflow from webdynpro abap.
regards
rose

Hi Rose
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/using%20web%20dynpro%20java%20and%20web%20dynpro%20abap%20applications%20in%20universal%20work%20list.pdf">Click</a> Here, to know the step by step procedure of using Webdynpro in Workflows
Use SAP_WAPI_START_WORKFLOW RFC
Regards
Abhimanyu L
Message was edited by:
Abhimanyu Lagishetti

Debuggng ABAP code from Portal ?

Hi ,
We are enhancing a portal Application ( EP 7.0) which points to the R/3 4.6 c in Backend . This Application has customised views . I want to debug the ABP CODE and see R/3 logic .
1) How can I see the RFC Function modules or Business objjects where logic pertaining to a I view is coded?
2)How Can I stop at R/3 while processing in the portal , so that I can debug ?
Thanks in Advance ,
Dharma .

There are 2 steps involved in external debugging:
1. Setting up the external debugging in R3:
GOTO se37
From the main menu goto
Utilities->settings
Under settings goto:
ABAP Editor->debugging
Under debugging subscreen you will get option of external debugging, make sure your user ID is mentioned (Please make sure you login to the portal with the same ID as mentioned here) and put a checkbox for "IP Matching".
2. Puting an external breakpoint in ABAP Code:
Now, you put a external breakpoint in your RFC FM which is getting called from the portal. Now your external debugging is set and once you click on the specific button on portal it will give you the debugging screen the moment it touches the ABAP code in R3.
Regards,
Raman.

Creating an xml file from abap code

Hello All,
Please let me know which FM do I need to execute in order to create an XML file from my ABAP code ?
Thanks in advance,
Paul.

This has been discussed before
XML files from ABAP programs

ABAP code needed to convert from 0calmonth2 & 0calyear to 0calmonth

Hi SAP GURUS,
Can anybody give me the ABAP code to convert from 0calmonth2 and 0calyear to 0calmonth.and please suggest me whether i have to write start routine or end routine in transformations.
Thanks ALL.

hi,
in the transformation map 0calmonth2 and 0calyear to the 0calmonth field, and from drop down choose routine.
there will be an area where it will be mentioned write your piece of code below this line.
paste the below code:
Concatenate source_fields-0calmonth2 source_fields-0calyear into result.
also delete the line result = .
save the routine and execute the package.
regards,
Arvind.

How can I modify data from a Transparent Table without ABAP code.

Hi,All
How can I modify data from a Transparent Table (like TCURR), and important thing is I want do all that with no ABAP code here. It is like that we always do that in a Oracle database use TOAD or PLSQL third party tools, with no script code here.
I had fond that there is a way can do that:
1, type 'se11',and Display Database table 'TCURR', click Contents, then click Execute to display all data
2, type '/h' and let debugging on
3, select one of this data then click 'Display',enter in debugging system.
4, then make a breakpoint in the code. But... display a dialog let I type a 'ABAP Cmnds', I want to know what can be type in for that?
and, My system is ECC6.
thank you all
Edited by: xuehui li on Aug 20, 2008 6:30 PM

Hello,
Your approach (with Vijay's suggestion) MAY work. However, depending on how tight security is at the company that you are working at you may or may not be able to acutaly change the value of the SHOW field to EDIT. This will be especially true if you are working in a Production environment. Vijay's other comment is true as well. This is not a recommended approach to change data (especially data with a financial impact like TCURR) in a production environment. The auditors will not be impressed.
Explore the option of a maintenace view or look at tcode TBDM to upload a file which includes daily rates from providers like Reuters or try tcode s_bce_68000174 which is a maintenance view on TCURR.
Regards
Greg Kern

ABAP Code Problem in Start Routine to Fill the value from Look-up Table ???

Hi all,
     I am trying to fill the values of DOC_NUMBER & PLANT from look-up table /BIC/AZSD_O0700 (Billing Item ODS) for each BILL_NUM in Start Routine for Update Rules of Billing Header ODS and modify the data_package.
What is wrong with the below ABAP code, PLEASE ???
data: it_data type standard table of data_package_structure
        with header line
        with non-unique default key initial size 0.
types: begin of billing_item_type,
             BILL_NUM          like /BIC/AZSD_O0700-BILL_NUM,
             DOC_NUMBER   like /BIC/AZSD_O0700-DOC_NUMBER,
             PLANT               like /BIC/AZSD_O0700-PLANT,
         end of billing_item_type.
refresh it_data.
clear it_data.
it_data[] = DATA_PACKAGE[].
refresh DATA_PACKAGE.
clear DATA_PACKAGE.
loop at it_data.
    select DOC_NUMBER PLANT into (it_data-DOC_NUMBER, it_data-PLANT)
           from /BIC/AZSD_O0700
           where BILL_NUM = it_data-BILL_NUM
           and    FISCVARNT = it_data-fiscvarnt.
    endselect.
    if sy-subrc = 0.
       move-corresponding it_data to DATA_PACKAGE.
    endif.
endloop.
modify DATA_PACKAGE.
Thanks,
Venkat.

Hi Venkat,
Two things -One is the performance and the other ... there is no Append within the loop.
Try moving the select statement ousdie the loop to improve performance and move the modify statement into the loop ... change modify to append. Code below.
   Let me know if you need more help.
Best regards,
Kazmi
data: it_data type standard table of data_package_structure
with header line
with non-unique default key initial size 0.
types: begin of billing_item_type,
BILL_NUM like /BIC/AZSD_O0700-BILL_NUM,
DOC_NUMBER like /BIC/AZSD_O0700-DOC_NUMBER,
PLANT like /BIC/AZSD_O0700-PLANT,
end of billing_item_type.
refresh it_data.
clear it_data.
it_data] = DATA_PACKAGE[.
refresh DATA_PACKAGE.
clear DATA_PACKAGE.
loop at it_data.
select DOC_NUMBER PLANT into (it_data-DOC_NUMBER, it_data-PLANT)
from /BIC/AZSD_O0700
where BILL_NUM = it_data-BILL_NUM
and FISCVARNT = it_data-fiscvarnt.
endselect.
if sy-subrc = 0.
move-corresponding it_data to DATA_PACKAGE.
Append DATA_PACKAGE.
endif.
endloop.

Execute ABAP Code Inspector from Outside of SAP

Hi all...
For reporting purpose, I would like to use ABAP Code Inspector (transaction SCI) for generating output as a file, it should call from outside of SAP through RFC function module and generate the list (output) as flat file (or XML), does anyone have been done with similar work like this? I wonder if you could share your experience with me...
thanks in advance,
yayan irianto.

I managed to set up the variant, however found a problem.
I used "Search ABAP Statement Patterns" under "Search Functs" and set the pattern like followings.
SELECT + INTO *
SELECT SINGLE + INTO *
However following statements were detected.
SELECT * INTO TABLE IT_DRAW FROM DRAW.
SELECT MANDT INTO TABLE IT_DRAW FROM DRAW.
SELECT SINGLE * INTO TABLE IT_DRAW FROM DRAW.
SELECT SINGLE MANDT INTO TABLE IT_DRAW FROM DRAW.
It's because + means one ABAP token in the code inspector.
Is there anyway to find only "SELECT SINGLE *" and "SELECT *" ?

ABAP Code in Start Routine for restricing the data records from ODS1 - ODS2

Hi
I need small ABAP Code in Start Routine Of Update rules Of ODS . Im in BW 3.5 .
I have records like below in first layer ODS and i want to restrict some records while going to second layer ODS ..
ODS1 :-
DocNO   EventType    Date
123         001             08/08/2008
123         003             08/08/2008
123         011              09/08/2008
I want one record in ODS2 for this document number whose EventType = 001 only and date of third record ... like below
Doc NO     EventType      From Date          Todate
123              001               08/08/2008         09/08/2008
So how can i get like this record in the ODS2 which will get data from ODS1 . So i need to write the code in the start routine of the ODS2 .
So please give the me the code for start routine ....
Regards
Suresh

Its difficult in BW 3.5 to include this logic in START_ROUTINE as you cannot add the extra to_date field to the DATA_PACKAGE table.
You need to create a new global internal table with the same structure of DATA_PACKAGE with additional field to_date. then use the logic to fill in the global internal table
define a internal table new_data_package with the required structure like (docno, eventtype, fromdate todate)
data: l_w_datapkg_001 type data_package,
data: l_w_newdatapkg type new_data_package,
data: l_w_datapkg_011 type data_package
LOOP AT DATA_PACKAGE INTO l_w_datapkg_001 WHERE event_type = '001'.
l_w_newdatapkg-docno = l_w_datapkg_001-docno.
l_w_newdatapkg-event_type = l_w_datapkg_001-event_type.
l_w_newdatapkg-fromdate = l_w_datapkg_001-date.
MOVE CORRESPONDING FIELDS OF l_w_datapkg_001 INTO l_w_newdatapkg.
READ TABLE data_package INTO l_w_datapkg_011
WITH KEY docno = l_w_datapkg_001-docno
                 event_type = '011'.
l_w_newdatapkg-to_date = l_w_datapkg_011-date.
APPEND l_w_newdatapkg TO new_data_package
ENDLOOP.
Now the new datapackage contains the ODS2 data that u needed

Excute workflow from step 3 by abap code

Similar Messages

Maybe you are looking for