Exec "alter system" and setup UTL_MAIL on Primary and replicate to Standby

Hi!
I have the next configuration:
DGMGRL> show configuration verbose;
Configuration - work_DataGuardConfig
Protection Mode: MaxAvailability
Databases:
primary - Primary database
physical1 - Physical standby database
physical2 - Physical standby database
Properties:
FastStartFailoverThreshold = '30'
OperationTimeout = '30'
FastStartFailoverLagLimit = '30'
CommunicationTimeout = '180'
FastStartFailoverAutoReinstate = 'TRUE'
FastStartFailoverPmyShutdown = 'TRUE'
BystandersFollowRoleChange = 'ALL'
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
How to properly setup UTL_MAIL package in my configuration (Primary and Standby Servers), e.g.:
1. If I execute " @$ORACLE_HOME/rdbms/admin/utlmail.sql " on Primary, it will replicate to Standby?
2. If I execute " alter system set smtp_out_server='smtp.server.local' scope=both " on Primary, it will replicate to Standby?
3. If I execute
begin
dbms_network_acl_admin.create_acl (
acl => 'utl_mail.xml',
description => 'Allow mail to be send',
principal => 'SCOTT',
is_grant => TRUE,
privilege => 'connect'
commit;
end;
on Primary, this changes will replicate to Standby?

user12024575 wrote:
Hi!
I have the next configuration:
DGMGRL> show configuration verbose;
Configuration - work_DataGuardConfig
Protection Mode: MaxAvailability
Databases:
primary - Primary database
physical1 - Physical standby database
physical2 - Physical standby database
Properties:
FastStartFailoverThreshold = '30'
OperationTimeout = '30'
FastStartFailoverLagLimit = '30'
CommunicationTimeout = '180'
FastStartFailoverAutoReinstate = 'TRUE'
FastStartFailoverPmyShutdown = 'TRUE'
BystandersFollowRoleChange = 'ALL'
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
How to properly setup UTL_MAIL package in my configuration (Primary and Standby Servers), e.g.:
1. If I execute " @$ORACLE_HOME/rdbms/admin/utlmail.sql " on Primary, it will replicate to Standby?
2. If I execute " alter system set smtp_out_server='smtp.server.local' scope=both " on Primary, it will replicate to Standby?
3. If I execute
begin
dbms_network_acl_admin.create_acl (
acl => 'utl_mail.xml',
description => 'Allow mail to be send',
principal => 'SCOTT',
is_grant => TRUE,
privilege => 'connect'
commit;
end;
on Primary, this changes will replicate to Standby?Hi,
In all cases (1,2,3) you are doing only system changes. System changes is not effective on standby database.
For example in your case : alter system set smtp_out_server='smtp.server.local' scope=both;
this script only set a parameter of database, how to you think this parameter must be chaged on standby?
Is it logically?
Then when we change log_archive_dest_2 for transport redo to standby, then this parameter will change on standby. is it true?
Regards
Mahir M. Quluzade
http://www.mahir-quluzade.com

Similar Messages

Alter system and Alter database

Hi all,
Can U please tell me the difference between alter system and alter database.
Thanks in advance...

From SQL Reference
Use the ALTER SYSTEM statement to dynamically alter your Oracle Database instance. The settings stay in effect as long as the database is mounted.
Use the ALTER DATABASE statement to modify, maintain, or recover an existing database.
instance => the processes using the database files
database =>database files

Primary RAC with physical standby

Hi all,
i have production setup as below
2 node 10gR2 RAC on win2K3 datafiles on ASM
Oracle Standard edition
On the standby site it will be a manual standby (since SE) .
Biz doesnt want the archives to be on local NTFS partition, hence the archives are on ASM. To resfresh the standby i need to transfer the archives through RMAN (catalog database is used) but facing issues when i take archive backup and put it on standby (error says that the files are already on storage) . So i am unable to refresh .
i guess it should be done through some scripts .... but how to register archives on the standby site.
Xml interface through catxdb was also tried(where we can ftp files from asm) but it takes only one file at a time so there will be manual intervention and not effective strategy
one more question: can i mount a shared drive (archives on this location) on primary RAC and same to be mounted on standby. If this is possible then i just need to shutdown the standby and give path of archives in asm and recovery can be done ?
pls share your feedback.....
thanks
[email protected]

So what I would do is this :
On the Primary :
alter system set log_archive_dest_state_2=defer;
Then stop recovery on the Standby and shutdown the database.
Startup mount and start recovery again and run you query again on that sequence.
If it finally clears enable the primary again.
alter system set log_archive_dest_state_2=enable;
If not try to register it yourself.
By chance does this show its waiting for a gap
select process, status, sequence#, block# from v$managed_standby;Best Regards
mseberg
Edited by: mseberg on Aug 23, 2011 8:38 AM

I'm trying to install Windows XP on a system, and Setup gets stuck at the "Setup is inspecting your computer's hardware configuration" stage

I’m trying to install Windows XP on a system, and Setup gets stuck at the “Setup is inspecting your computer’s hardware configuration” stage
how can I fix it, i turned off and on, and the message still there help please

If you have a PPC Mac, you can't install Windows unless you are using something like Parallels or a virtual application. If you are using Boot Camp, eject the disc, reboot and try again.
Miriam

Device object not present,restart the system and run setup again????

i install window xp sp2 in my macbook,when i install driver by mac os cd,installation run until sigmatel,it show error,the my mbp will restart automatically,and the driver installion not complete!! i try to install sigmatel idt sound driver manually,when system update the hardware configuration,it show an error message
" device object not present,restart the system and run setup again"!!!! so i can not fully install bootcamp driver in window!
any can help??
macbook pro 13" 2010 mid

Hi:
Your notebook is not supported by HP for Windows XP.
Please read the XP downgrade guide at the link below for instructions on how to get your audio to work in XP.
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
The specific instructions for your model series can be found in the section titled 3. Difficult Models
Paul

OES11 SP2 - Linux File System and NSS Pools & Volumes

Planning to install our first OES11 SP2 server into an existing tree - the
idea is to run this new OES11 server virtualized on VMware ESXi 5.5
The existing tree has two physical NW6.5SP8 servers running eDirectory
Version 8.7.3.10b (NDS Version 10554.64). One of the existing Netware
servers is used for DHCP/DNS, File Sharing from three NSS volumes and
Groupwise 7.0.4 whilst the second server is used for FTP services and
eDirectory redundancy. Ultimately the plan is to have two virtualized OES11
SP2 server with one for file sharing and the other for making the move from
GW7 to GW2012. And we're planning to stick with NSS for file sharing on the
new OES11 SP2 server.
I've come across a couple of posts for earlier versions of OES which
recommended not to put the Linux Native OS File System and NSS storage
pools/volumes on the same hard drive. Apparently the advice was a result of
needing to allow EVMS to manage the drive which could be problemmatic.
I've read the OES11 documentation which says that "The Enterprise Volume
Management System (EVMS) has been deprecated in SLES 11, and is also
deprecated in OES 11. Novell Linux Volume Manager (NLVM) replaces EVMS for
managing NetWare partitions under Novell Storage Services (NSS) pools."
So I'm wondering if there is still a compelling requirement to keep the
Linux Native File System and NSS pools/volumes on separate hard drives or
can they both now safely co-exist on the same drive without causing
headaches or gotchas for the future?
Neil

Hi Willem,
Many thanks for the further reply.
So we can just use the VMWare setup to "split" the one physical drive into
two virtual drives (one for the OS and the second for the pools).
And I've seen posts in other forums about the need for a decent battery
backed cache module for the P410i controller so I'll make sure we get one
(probably 512Mb module + battery).
Can I ask what is the advantage of configuring each VM's virtual disk to run
on it's own virtual SCSI adapter (by setting disk1 to scsi 0:0, disk2 to
scsi 1:0, and so on)?
Cheers,
Neil
>>> On 9/5/14 at 12:56, in message
<[email protected]>,
magic31<[email protected]> wrote:
> HI Niel,
>
> xyzl;2318555 Wrote: >
>> The new installation will run on a Proliant ML350 G6 with P410i>
> controller
>> so we can use the raid capability to create two different logical drives>
> as
>> suggested.
>
> As you will be using ESXi 5.5 as host OS, it's not needed to split
> thehost server storage into two logical drives... unless that's what
> youwant in perspective for "general performance" or redundancy reasons.
> Italso depends on the options that P410i controller has.
>
> On a side note, I'm not too familiar with the P410i controller... domake
> sure you have a decent battery backed cache module installed, asthat will
> greatly help with the disk performance bit.
> If the controller can handle it and the controller can handle it, go
> forraid 10 or raid 50. That might be too big a space penalty but will
> helpwith disk performance.
>
> Once you have your VMware server up and running, you can configure
> thetwo VM's with each two or more drives attached (on for the OS,
> thesecond or others for your pools).
> I usually create a virtual disk per pool+volume set (e.g. DATAPOOL
> &DATAVOLUME on one vm virtual disk, USERPOOL & USER volume on an other
> vmvirtual disk).
> With VMware you can than also configure each VM's virtual disk to run
> onit's own virtual SCSI adapter (bij setting disk1 to scsi 0:0, disk2
> toscsi 1:0, and so on).
>
>
> xyzl;2318555 Wrote: > Do you have any suggestions for the disk space that
> should be reserved> or
>> used for the Linux Native OS File System (/boot, /swap and LVM)?
>>
>
> Here's one thread that might be of interest (there are more
> throughoutthe SLES/OES
>
forums):https://forums.novell.com/showthread...rtitioning-%28
> moving-from-NW%29
>
> I still contently follow the method I choose for back in 2008, justwith
> a little bigger sizing which now is:
>
> On a virtual disk sized 39GB:
>
> primary partition 1: 500 MB /boot , fs type ext2
> primary partition 2: 12GB / (root), fs type ext3
> primary partition 3: 3 GB swap , type swap
>
> primary partition 4: LVM VG-SYSTEM (LVM partition type 8E), takes up
> therest of the disk **
> LVM volume (lv_var): 12 GB /var , fs type ext3
> LVM volume (lv_usr-install): 7GB /usr/install, fs type ext3
> * there's still a little space left in the LVM VG, in case var needs
> toquickly be enlarged
>
> One thing that's different in here vs what I used to do: I replaced
> the/tmp mountpoint with /usr/install
>
> In /usr/install, I place all relevant install files/IOS's
> andinstallation specifics (text files) for the server in question. Keeps
> itall in one neat place imo.
>
> Cheers,
> Willem-- Knowledge Partner (voluntary sysop)
> ---
> If you find a post helpful and are logged into the web interface,
> please show your appreciation and click on the star below it.
>
Thanks!---------------------------------------------------------------------
---magi
> c31's Profile: https://forums.novell.com/member.php?userid=2303View this
> thread: https://forums.novell.com/showthread.php?t=476852

Alter system set events Question

Version 10202 on AIX
sql> alter system set events '4030 trace name heapdump level 536870917; name errorstack level 3';
Questions about this statement..
what this command is doing, i guess creating tracefile for event 4030...& the location of trace file would be the current direcotry?
& how to setup same kind of event trace for other events, any tips....& what to check in tracefile for problem?

The values for level I have record are 1, 2, 3, 8, and 32 so I am guessing the number shown is the address of a specific heap to be dumped. The address of a heap would potentially change with a change in the shared pool storage parameters. Where did you get the address value?
The dump should go to the user background dump destination and not the current directory.
PS - if you have metalink look at document: #218105.1 Introduction to ORACLE Diagnostic EVENTS
HTH -- Mark D Powell --
Message was edited by: MDP add PS to Metalink Doc
mpowel01

Ora-02065:Illegal option for alter system.

Hi Dba's,
I want to setup my database oracle 9i to use "FlashBack".
My database is running in archivelog mode.
First I've shutdown the DB and start it in mount mode.
Then I tried:
SQL> alter system set DB_FLASHBACK_RETENTION_TARGET=1800;
But it doesn't work, I always got the same error:
ora-02065:illegal option for alter system.
I tried to connect as SYS,SYSTEM, everyone, the same error. The users must have FlashBack Privilege and Execute
DBMS_FlashBack privileges. They're OK.
I don't know how to solve this problem?!
If someone could help me. Tks a lot.
Marcello

Marcello:
See this:
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=275083.1
to make sure you have other parameters setup correctly.
Tom Best

Patching on PRD system and thereafter moving the logs to DR ?

Patching on PRD system and thereafter moving the logs to DR, will the patches take effect in DR ?
We have patched our PRD system to the latest APPL patch levels, we have a DR system in place, the link for which was disabled before we started our patching process. The DR system was successfully patched before taking up the activity on PRD.
The link between the PRD and DR is still not restored.
Now, that our PRD system is on the latest patch levels, my idea is restoring a full offline database backup of PRD on the DR system should make the DR system exactly identical to the PRD and the link between the two restored to allow for dynamic syncing thereafter.
Is my above view correct ?
Moreover, from my understanding, Patches are a bunch of SAP notes, SAP notes in-turn are basically code corrections for some objects, which ultimately means some entries are either written or deleted from database tables. My colleagues are of the view that instead of patching the DR server separately we could have actually restored the link and transferred the logs to the DR and the patches should have taken effect in the DR SERVER, is this alright ?
From my past experience I am aware that once you restore an offline database backup onto any system, the patch level in the target system would become similar to the source system(the system whose offline backup is actually being restored).
Thereby request the experts on the forum to give their views on the above.
Many Thanks in advance

when we take up any patching activity, can we just do it on the PRD and then move on the logs to the DR and the DR should also be on the same patch levels as PRD. ?
Yes, its a normal patching process for Primary-->Secondary setups.
You have to apply the application patches only on Production, then sync process takes care on DR (No need to apply the pathces here, infact you don't need to touch your exisiting DR system).
As a best practice - Just perform a Quality refresh before performing patching activity, then you can perform your test Patching/Upgrade activity in your Quality system itself (Not on DR).
Regards,
Nick Loy

Using Runtime exec() to open and close process like java or javac

Hi, I m a student who is learning IT and is wondering if
Runtime exec() can run and stop commands like java and javac?
Can someone post the code to do so here?Thank you

Well, Here is my complete code:
import java.util.*;
import java.io.*;
import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
class StreamGobbler extends Thread
InputStream is;
String type;
StreamGobbler(InputStream is, String type)
this.is = is;
this.type = type;
public void run()
try
InputStreamReader isr = new InputStreamReader(is);
BufferedReader br = new BufferedReader(isr);
String line=null;
while ( (line = br.readLine()) != null)
System.out.println(type + ">" + line);
} catch (IOException ioe)
ioe.printStackTrace();
class Program implements Runnable
     Process proc;
String args[];
     String[] cmd = new String[4];
     boolean isGone=false;
     public Program(String args[])
          this.args=args;
     public void run()
          if (isGone==true)
               try
                    Runtime.getRuntime().exec(cmd).destroy();
               catch(IOException e)
                    System.out.println("Error: "+e.toString());
               System.out.println("User abort");
     public void start(String args[])
          if (args.length < 1)
System.out.println("USAGE: java GoodWindowsExec <cmd>");
System.exit(1);
try
String osName = System.getProperty("os.name" );
if( osName.equals( "Windows NT" ) )
cmd[0] = "cmd.exe" ;
cmd[1] = "/C" ;
cmd[3] = args[0];
else if( osName.equals( "Windows 95" ) ||osName.equals( "Windows 98" ))
cmd[0] = "command.com" ;
cmd[1] = "/C" ;
cmd[2] = args[0];
                    cmd[3]=args[1];
Runtime rt = Runtime.getRuntime();
// System.out.println("Execing " + cmd[0] + " " + cmd[1]
// + " " + cmd[2]+" "+args[1]);
proc = rt.exec(cmd);
// any error message?
StreamGobbler errorGobbler = new
StreamGobbler(proc.getErrorStream(), "ERROR");
// any output?
StreamGobbler outputGobbler = new
StreamGobbler(proc.getInputStream(), "OUTPUT");
// kick them off
errorGobbler.start();
outputGobbler.start();
// any error???
// int exitVal = proc.waitFor();
//System.out.println("ExitValue: " + exitVal);
} catch (Throwable t)
t.printStackTrace();
     public void destroy()
          isGone=true;
class test1 implements ActionListener
     String s[]={"c:\\jdk1.3\\bin\\java.exe","ContactProcessor1"};
     GUI g=new GUI();
          Program p=new Program(s);
     public test1()
          //didnt work
          g.getStart().addActionListener(this);
          g.getStop().addActionListener(this);
          g.show();
     public void actionPerformed(ActionEvent e)
          if (e.getSource()==g.getStart())
               p.start(s);
               p.run();
          if (e.getSource()==g.getStop())
               p.destroy();
               p.run();
     public static void main(String args[])
          test1 t = new test1();
class GUI extends JFrame
     JButton start;
     JButton stop;
     public GUI()
          super();
          getContentPane().setLayout(new FlowLayout());
          start=new JButton("start");
          stop=new JButton("stop");
          getContentPane().add(start);
          getContentPane().add(stop);
          setSize(100,100);
     public JButton getStart()
          return start;
     public JButton getStop()
          return stop;
}

SYSTEM and SYS password 11g on Windows Vista

Hello
I am having trouble. I do not know my SYSTEM and SYS passwords. I am using oracle 11g on windows vista. I tried to change the passwords but that did not work. I tried this:
c:/>sqlplus "/ as sysdba"
c:/>show user
c:/>passw system
then I changed the password. When I tried to log in the password change did not take effect. Any help would be great!

Hi,
There is no default password for sys and system in 11g.
you cna use the below command to change the system or sys password
alter user SYSTEM identified by PASWORD
same for sys
nOTE: password are case sensitive.Regards,
Taj

System and Object privileges question

hello everyone.
I was really making it a priority to really understand both system and object privileges for users. I have setup a couple of 'sandboxes' at home and have done lots of testing. So far, it has gone very well in helping me understand all the security involved with Oralce (which, IMHO, is flat out awesome!).
Anyway, a couple of quick questions.
As a normal user, what view can I use to see what permissions I have in general? what about permissions on other schemas?
I know I can do a:
select * from session_privs
which lists my session privileges.
What other views (are they views/data dictionary?) that I can use to see what I have? Since this is a normal user, they don't have access to any of the DBA_ views.
I'll start here for now, but being able to see everything this user has, would be fantastic.
Cheers,
TCG

Sorry. should have elaborated more.
In SQLPLUS, (logged in while logged into my Linux OS), I am working to try and get sqlplus to display the results of my query so it is easy to read. Right now, it just displays using the first 1/4 or 1/3 of the monitor screen to the left. Make sense? So it does not stretch the results out to utilize the full screen. it is hard to break down and read the results because they are "stacked" on top of each other.
Would be nice if I could adjust sqlplus so the results are easier to read.
HTH.
Jason

Client Delete and Logical System and CUA

I'm getting ready to do some client clean up in prep for an upgrade from ECC 5 to ECC 6 soon.
Currently we have a 3 system landscape: DV1 QA1 PR1
Clients on these systems are as follows: (not including 000, 001, 066)
PR1:100 - the production client
QA1:100 - Integration Master - not used except for RFC connections for Solution Manager
QA1:110 - Cycle 1 testing - not used
QA1:120 - Cycle 2 testing - not used
QA1:200 - Old training master client - not used
QA1:201 - Old training client - not used
QA1:710 - no longer being used for testing
QA1:720 - client used for system and integration testing
DV1:100 - Configuration - not used
DV1:110 - ABAP development
DV1:120 - Configuration
DV1:700 - Template for test - not used
DV1:710 - Test with prod data
Most have a logical system defined for the client.
I am going to delete those I've underlined above as they are no longer used.
Some of these are setup in the CUA system.
All are showing up in Solution Manager SMSY system landscape.
My plan is to backup the system database first!
Then:
1) Delete the client(s) (SCC5) one by one
2) Remove the client from CUA (SCUA)
3) Remove the logical name (SALE)
What I am unsure about is the order of the process. Should the CUA and ALE modifications come before actually deleting the client?
Does this sound like a reasonable plan to clean up our client landscape?
Thanks in advance for your suggestions and help.
Laurie McGinley

Dear Laurie,
Order should be like below:
1) Remove the client from CUA (SCUA)
2) Delete the client(s) (SCC5) one by one
3) Remove the logical name (SALE)
More over you should delete these clients from Solution Manager also inorder not to have error message when you go to solution Manager for doing anything on that system.
Please revert back for any queries.
Regards
Shailesh Mamidwar

How to Create Primary DB and Physical/Logical Standby DB on the same host?

Now I encounter a issue. I want to create one Primary DB and one Physical standby DB and one Logical standby DB on the same host.
Create this env on the same host aims to test whether we can using EM Patching DP to apply patches on Primary/Physical/Logical DB successfully.
I try to setup this env but fails. I want to know more related issues about create Primary DB /Physical DB/Logical DB on the same host and how to configure between them.
Below steps is my try:
1. Create Primary DB on the /scratch/primary_db
2. Create Physical Db software only on the /scratch/physical_db
3. Create Logical Db software only on the /scratch/logical_db
4. Using EM Wizard to create physical standby database and logical standby database, and these two targets can show up on the "All Targets" Page.
5. But when using EM Patching DP, it fails and the reason is the listener of physical and logical db cannot configured well.
Issues:
So I want to know about how to configure physical db and logical db's listener using EM or manually?
If the listener name of Primary Db is LISTENER and the port is 1521,and the listener.ora is under the /scratch/primary_db/network/admin directory, then how to config physical db and logical db's listener's name and port?

Hi,
As this a test case then you need to create two more listener for each Oracle Home (/scratch/physical_db & /scratch/logical_db) make sure that they have different names and ports.
Then add the new listeners manually using GC?
Try it and let me know
Regards
Amin

Two SNC system and one execution system

Hi Experts
Can there be possibilty of Two snc system to co exist with one execution system ECC?
IF yes can you folks please throw some light on the same?
This situation is arising because:
the Lime table in the existing system has really grown huge and the archiving is not helping becuase there are new records that are added to the system every day which are more than the archiving records
because of this huge data the upgrade is not possible and we are planning for a new setup, now to mitigate the risk we were tryin if two SNC system can coexist with one EEC system.
Now to add to the problem is there are certain business scenarios because of which we need to put in data in lime table every day
so reduction in data input is not possible.
As the data in LIME is only stock of the customer coming every day and if we just transaction data , even if we go away with all the data is not an issue with us as customer reports his existing stock on daily basis to us.
We have even thought of truncating all the tables available in in lime objects in SARA, we are thinking of this becuase system might act erratic when we setup new system and slow try moving few customer from existing to new system. as a pilot.
Supposing if we go ahead with it ,wht could be the issues ?
Thanks for all your help and suggestions
Regards
Manas Malhotra

Hi Manas
Two SNC systems can coexist together.
You need to define seperate Business System Groups,RFC settings,Logical System definition
Also you need to have seperate Identification for your master data, create your own definition in BADI
Example:If you are sending same material XXX to two SCM systems how to diferrentiate ???
Because BADi methods EXIT_/SAPAPO/SAPLCIF_LOC_001 & EXIT_/SAPAPO/SAPLCIF_PROD_001
differentiate when two ERP systems are connected to one SNC system by prefix and sufix, now you need to have your own code to differentiate
Also big time care should be taken in defining the distrubution models (bd64) and even in XI/PI like
Example: we have two TM systems coexisting with one ERP, so we used conditoned based mapping
Itu2019s a condition based mapping.
1) When TransportationRequestSUITERequest/TransportationRequest/ShipToLocation/InternalID = BP1 or BP2 or BP3 u2026 the receiver is I5YCLNT100
2) When TransportationRequestSUITERequest/TransportationRequest/ShipToLocation/InternalID = BP4 or BP5u2026the Receiver is I5XCLNT100.
Also care should be taken on master data/FICO settings which both systems use in common. like using Ztypes instead of using standard one like order type, message type. It should be easy when you troubleshoot back!!!
The inbound message parameters should be taken care w.r.t business needs
Good to have a matrix mapping like what business process coexit in both systems and which doesnot and then try to see what settings need to be tailored???
Best Regards
Vinod

Exec "alter system" and setup UTL_MAIL on Primary and replicate to Standby

Similar Messages

Maybe you are looking for