Execute command with defined parameters

Hi,
I have a firefox addon, "Image Assistent", which enables you to open images with an image viewer. The only possibility is gThumb, which I do not like. So one makes a symbolic link. I have made one so it uses Feh. But I want Feh to be executed as "feh -ZF --hide-pointer". How do I do this?
I made a tiny script feh.sh with "feh -ZF --hide-pointer" as content, but this lacks what image it should open. An alias doesnt work. So how can I get feh to open with said parameters?
Thanks

Use this as script
#!/bin/sh
feh -ZF --hide-pointer "$*"

Similar Messages

Executing Procedure with default parameters !!

hi want a small help ...
I have a
procedure p1(p1 in number default 2, p2 in number default 3)
begin
end;
When the procedure will be called without passing parameters it will execute with default parameters.
That time I want to dispay message saying
" AS paramters are not passed, procedure is being executed with foll. default parameters:
Param 1 = 2
Param 2 = 3 "
Now issue is how do I capture this condition that , the parameters are being passed and it is using default parameters ?
Thanks

The IF NOT NULL check for the parameters cannot be inside the same procedure becuase when you reach that statement, even though the parameter are not passed to this procedure, at that stage, the parameters will acquire the dfault values already assigned to them. So you never reach the else part of it.
That;s why i said, use third parameter and assign the value to this third parameter from the calling environment.
here is the short test case that might help you to understand better.
SQL> create or replace procedure myproc
2 (p1               number default 1
3 ,p2               number default 2
4 ,parameter_passed char default 'Y') is
5 begin
6    if parameter_passed = 'Y' then
7      dbms_output.put_line('Input values are :'||p1||'='||p2);
8    else
9      dbms_output.put_line('Default values are :'||p1||'='||p2);
10    end if;
11 end;
12 /
Procedure created.
SQL> PROMPT Test for Case one with input parameter values
Test for Case one with input parameter values
SQL>
SQL> declare
2   param1 number := 5;
3   param2 number := 6;
4 begin
5   if param1 is not null and param2 is not null then
6     myproc(param1,param2);
7   else
8     myproc(parameter_passed=>'N');
9   end if;
10 end;
11 /
Input values are :5=6
PL/SQL procedure successfully completed.
SQL>
SQL> PROMPT Test for Case two with no parameter values
Test for Case two with no parameter values
SQL>
SQL> declare
2   param1 number := null;
3   param2 number := null;
4 begin
5   if param1 is not null and param2 is not null then
6     myproc(param1,param2);
7   else
8     myproc(parameter_passed=>'N');
9   end if;
10 end;
11 /
Default values are :1=2
PL/SQL procedure successfully completed.
SQL>

Runtime execute command with arguments

hi
i need to execute the following command with arguments in java. this is how i would do it in cmd
C:\Users\name\File\root.exe -a192.168.1.0 -wpassword -p11 -cON where 192.168.1.0 is the ipaddress and i have it in my java program as a string.similarly password is a string and 11 is the port number as an int in java..i need to execute this in java..
i just have this:
String[] command = {"C:\Users\name\File\root.exe", ......};thanks

d_khakh wrote:
also when i said this
String[] command = {"C:\Users\name\File\root.exe", ......};i meant i do not have anything in place of dots. its uncompleted..do not assume i got this part!Yeah, you should read the documents I pointed you to and try to fill in those dots. It really looks like you want someone to do it for you, and that ain't gonna happen (well it usually doesn't anyway).

User Defined Activity: Run OS Command with OS parameters

OS: OELR5 U3 x64
DB: 11.1.0.7
OWB: 11R1
I would like to be able to run an os command from a user defined activity within a process flow. I am trying to make use of VMWare's vmrun to control a virtual machine. From the OS command line I enter:
/usr/bin/vmrun -T server -h https://server:port/sdk -u user -p userpassword -gu guest -gp guestpassword runProgramInGuest "[standard] VM/Virtual Machine.vmx" -activeWindow -interactive "c:\path_to_program\program.exe" /switch
How many I duplicate this OS command from within a user defined activity in a process flow?
I create a user defined activity:
COMMAND: /usr/bin/vmrun
PARAMETER_LIST:
RESULT_CODE:
SCRIPT: -T server -h https://server:port/sdk -u user -p userpassword -gu guest -gp guestpassword runProgramInGuest "[standard] VM/Virtual Machine.vmx" -activeWindow -interactive "c:\path_to_program\program.exe" /switch
SUCCESS_THRESHOLD: 0
The process runs without error in the log, but the os command is not being run.
I tried again with:
COMMAND: /usr/bin/vmrun
PARAMETER_LIST: ?-T?server?-h?https://server:port/sdk?-u?user?-p userpassword?-gu?guest?-gp guestpassword?runProgramInGuest "[standard] VM/Virtual Machine.vmx"?-activeWindow?-interactive?"c:\path_to_program\program.exe"?/switch?
RESULT_CODE:
SCRIPT:
SUCCESS_THRESHOLD: 0
with the same result.
And I also tried calling sh:
COMMAND: bin/sh
PARAMETER_LIST:
RESULT_CODE:
SCRIPT: /usr/bin/vmrun -T server -h https://server:port/sdk -u user -p userpassword -gu guest -gp guestpassword runProgramInGuest "[standard] VM/Virtual Machine.vmx" -activeWindow -interactive "c:\path_to_program\program.exe" /switch
SUCCESS_THRESHOLD: 0
also with the same result.
The process runs in each case, and ends with: "Log file is available", but when I look in the log, I don't see errors or any information that might help me adjust the user defined activity.

This method works:
COMMAND: bin/bash
PARAMETER_LIST:
RESULT_CODE:
SCRIPT: /usr/bin/vmrun -T server -h https://server:port/sdk -u user -p userpassword -gu guest -gp guestpassword runProgramInGuest "standard VM/Virtual Machine.vmx" -activeWindow -interactive "c:\path_to_program\program.exe" /switch
SUCCESS_THRESHOLD: 0
The issue seems to be caused on an upgrade to OWB 11R2. Our installation does not always update the VALUE entry when a user types in a value, meaning that our entry changes were not reflected into the deployed process package.

Execute javascript with input parameters of a taskflow

Using JDev 11g PS4
I have a taskflow that uses some javascript. When the taskflow has been loaded, I need to execute a javascript function that uses 2 input parameters of my taskflow.
I don't really know how I can execute the javascript with my input parameters.
As a test, I have added a commandButton in my taskflow that will do the job:
<af:commandButton id="btnRefresh" text="Open">
            <af:clientAttribute name="long" value="#{pageFlowScope.pLong}"/>
            <af:clientAttribute name="lat" value="#{pageFlowScope.pLat}"/>
            <af:clientListener method="doNavigate" type="click"/>
        </af:commandButton>How do I do the same when the taskflow loads instead of needing to push the button.

Please find attached sample based on your use-case:
http://adfsampleapplications.googlecode.com/svn/trunk/JavascriptOnLoadSample.rar
It invokes a javascript function on pagefragment load by passing the input parameters from the taskflow.
Thanks,
Navaneeth

Executing procedures with OUT parameters using Named notation

I have a procedure with two out parameters (p_errortext and p_returncode) and i want to execute this proc in SQL*plus using named notation(using association operator ' => '). For position based execution i usually declare variables to hold the OUT parameter's value. But how can i do this while executing using named notation (using => )
begin
     packagename.generate_ref_record(p_userid => 'THELMA',
                                  p_ref_code       => '9A',
                                  p_item_id    => '9990000011163',
                                  p_shipno     => '0PH',
                                  p_errortext => ??
                                  p_returncode => ??);
end;

SQL>variable x varchar2(30);
SQL>variable y varchar2(30);
SQL>exec packagename.generate_ref_record(p_userid => 'THELMA',
                                      p_ref_code       => '9A',
                                      p_item_id    => '9990000011163',
                                      p_shipno     => '0PH',
                                      p_errortext => :x
                                      p_returncode => :y);

Executing Commands with CachedRowSet

Hi,
Could anyone tell me if it is possible to execute a SQL querry against a cached row set? For example, the cached rowset has been populated with data about Customers with fields Name, Order, PartNo. I wish to retrieve the Name and Order fields for a specific PartNo. Any idea how I would do this?
Thanks

What I am doing right now is loading all the data at
the same time. So I don't need to connect to the DB
to fetch the information again.I see.
>
The reason why it is inefficient is that the search
has to be performed about 100 or so times all
sequentially.Why sequentially?
Use an additional hash. The first time you go through the row set you populate the hash with the key being the part number and whatever other info you want associated with it being the data/value - probably as an array or even another hash.
Then when you want info on a part num you use the hash rather than the row set.
Note that excluding other information 100 times is very small in most terms.

Executing commands with game controller

How can I map commands (such, uname -a for example) to the buttons on my controller?
So far, I've gotten xf86-input-joystick to work with the following in my xorg.conf
Section "InputDevice"
Identifier "Dualshock2"
Driver "joystick"
Option "Device" "/dev/input/js0"
EndSection
and the following in the ServerLayout section
InputDevice "Dualshock2" "SendCoreEvents"
But for some retarded reason, xorg just seems to consider my controller to be another mouse: I can move the pointer with the arrows, buttons 1, 2, and 3 act as mouse buttons, etc.
I know I set xorg.conf to map keyboard keys to separate buttons, but how do I map commands? For example, I want to map "mpc toggle" to the start button (button 9).

ok, I solved this myself
I just had to remap each button on the controller as another mouse button; for instance
Section "InputDevice"
Identifier "Dualshock2"
Driver "joystick"
Option "Device" "/dev/input/js0"
Option "MapButton1" "button=9"
Option "MapButton2" "button=10"
Option "MapButton3" "button=11"
Option "MapButton4" "button=12"
Option "MapButton5" "button=13"
Option "MapButton6" "button=14"
Option "MapButton7" "button=15"
Option "MapButton8" "button=16"
Option "MapButton9" "button=17"
Option "MapButton10" "button=18"
Option "MapButton11" "button=19"
Option "MapButton12" "button=20"
Option "MapButton13" "button=21"
Option "MapButton14" "button=22"
Option "MapButton15" "button=23"
Option "MapButton16" "button=24"
EndSection
so, that's that
from there I've been able to map each button to a command using xbindkeys
axis 1 (left stick) controlls the pointing, and the right stick seems to do scrolling
awesome

Tcp/ip write help - need to send a motor command with parameters

hello - i have one small, main labview 7.0 vi that i use to control a drill's two motors.
right now i press a button on the front panel to move the motor, and when i do, a sub vi window pops up so the operator can set a couple of parameters and press an ok button.....the vi then sends the command with the parameters to the drill's motors.
i am trying to change it so i can send the move command from another computer, in another room, while the main vi sits on the computer with the drill. i know i will use TCP listen, write, read, and close in both the main vi (the TCP server?) and the client which is on the remote computer.
my problem is with setting the parameters for the subvi's that usually pops up. how do i set the parameters from the remote-client and have them be sent into the subvi on the main vi. if i can do this, i would have to also have a way to close the sub vi after it pops up in the main program too.
OR should i use something else like and application reference or an invoke node function?????
please help
thanks!!!!
sam

Hi again,
If the VI in the lab will be running continuously, then you will need
to alter some things from the example I sent you or look at an
alternate implementation. The example I sent you assumed that the VI in
the lab was not running. This technique actually starts the VI and runs
it somewhat like a subVI. It inputs values into the connector pane,
runs it, and then returns values from the outputs on the connector pane
after it finishes executing. It will not work to call a VI by reference
if it is already continuously running.
Instead I imagine you would want to have your VI in the lab have some
sort of State Machine that polls a certain control value, such as an
enum control, to determine which state to execute next. You could
modify the technique I first sent to still open a reference to the VI
in the lab, but it wouldn't try to run it. Instead you could use the VI
method Set Control Value to set the value of a certain control or
controls in the lab VI to certain values. The VI in the lab would then
hopefully be in some Idle state where it polled one of those control
values continuously to decide what to do next. That would allow the VI
in the office to programmatically send commands to the other VI, as
well as parameters for those commands. Simply set control values for
the VI in the lab and let the VI in the lab go about its business. I've
attached an example below.
That's just one idea. Other options you have would be to use a
DataSocket connection to send parameters and commands back and forth
between computers. This is a pretty simple API to use. If you have
LabVIEW 8, Shared Variables are an option. Or you might look into
simply using Remote Front panels, which allows you to connect to a VIs
Front Panel across the network. You could then have the whole VI in the
Lab, but you could connect to it, view it, modify the controls and so
on from your office. If you want to view and control a VI without
having LabVIEW installed on the viewing computer, you can use the Web
Publishing Tool to create a web interface for your front panel. Lots of
options. Let me know what sounds interesting.
Jarrod S.
National Instruments
Attachments:
Lab_VI.vi ‏29 KB
Office_VI.vi ‏51 KB

How to exec command with parameters through runtime.exec()

im trying to run a command prompt passing in parameters. Right now im creating a .bat file like this
c:
cd C:\SOMEDIR
ant deploy moreparameters
and then passing in the file name into the exec command. It is running fine but im trying to use the runtime.destroy() command and it doesnt close the ant command, it only closes the bat file which was already closed. Is there a command I could pass into the exec() method to run the ant command with the parameters without using a bat file?

im getting a CreateProcess: ant deploy -Dswasm=swasm error=2
When i try to do
cmds[0] = "ant";
cmds[1] = "deploy";
cmds[2] = "-Dswasm=all-bs";
Process p = runTime.exec(cmds, null, new File("C:\\Program Files\\apache-ant-1.6.1\\bin"));
its like it cant find ant. But it finds java command fine. What should i pass into the second parameter, it says "If envp is null, the subprocess inherits the environment settings of the current process. " Does that mean it will take the window system enviroment variables? if not what string would i pass in to set where ant is?

Using continuation character in EXECUTE command

In SQL*Plus, the following sample EXECUTE command works fine
EXECUTE MyProcedure(arg1, arg2)
But if I try to break it into two lines:
EXECUTE MyProcedure(arg1, -
arg2)
I get a character to number conversion error ORA-06502
Both of the arguments are of VARCHAR2 type.
I thought the hyphen character was supposed to let you continue a command on more than one line. How can I break up this command?

The EXECUTE works with SQL*Plus and does not work from within SqlDeveloper
The contents of the procedure, which is part of a package, seems to be irrelevant since the problem occurs even with an empty procedure body (just a NULL; statement).
My platform is Windows2000. Database version is 11g. SQLDeveloper version is 1.2.1
To reiterate, when I type on command line in SqlPlus there is no problem, when I run it from a script file from within SqlPlus there is not problem. The problem occurs only from within SqlDeveloper. Replacing the EXECUTE command with an anonymous block does work in either environment.
It is difficult for me to show exactly what is in the called procedure since the machine it is running on is not connected to the internet and would require retyping the whole procedure out here -- that's why I tried the experiment with the NULL body with the exact same results as with the non NULL body.
Message was edited by:
user556531

Passing user defined parameters in oracle reports thru command line

Hi All
We are currently using Reports 6i with Oracle 10g 10.2.0.4.0
I would like to know that is it possible to pass user defined parameters values while calling report from command line.
For Example: I am using following coding to call report from command line.
for /f "tokens=1-3 delims=/ " %%a in ('date /t mm/dd/yyyy -1') do (
set mm=%%b
set dd=%%a
set yyyy=%%c)
rwrun60 report=c:\reports\banks.rdf userid=express/test@test_rs2 destype=FILE desname=c:\reports\banks%dd%%mm%%yyyy%.pdf desformat=PDF BACKGROUND=NO BATCH=YES
The report contains some user defined parameter which is using in where condition of reqport query.
Select * from banks
where id = :Bank_ID
Now I want to Pass value for :Bank_Id from command line (like we pass parameter list while calling report with run_product), how it is possible?
Thanks
Hassan

Hi guys
Fortunately I am able to perform the required task as I just added the report parameter field as follows:
rwrun60 report=c:\reports\banks.rdf userid=express/test@test_rs2 destype=FILE desname=c:\reports\banks%dd%%mm%%yyyy%%h%%mi%%ss%%ts%.pdf desformat=PDF BACKGROUND=NO BATCH=YES ERRFILE=c:\reports\error.log LOGFILE=c:\reports\joblog.log bank_id='MCB'
bank_id is the report parameter using in where clause.
Regards,
Hassan

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

No you just need to turn on Tap to Click. Go into System Preferences - Trackpad and click the Point to Click tab and select the first box which will say Tap to Click and you should be in business.

Problem in using JDBC Execute commands(Update & Delete Only) with af:Table

HI Everyone,
I have one issue with Updating and Deleting Row Data using JDBC Execute commands.
Suppose In My Application i have two pages, in Page 1 I have Two Command Buttons(Delete and Save) and One Input TextBox to write the String to be stored in the Database. and Page 2 where the result Table is shown and table is binded with a ViewObject, Now When User Types some String in InTB and click Save then By Programmatically I'm searching, that string is already present in database or not, if it is already exist then Save button converts in Update button and instead of inserting it allows user to Update the String already exist in database.
Everything is working fine but the problem comes when i put those all buttons on the same page where result table is present.After putting all things on the same page and When i click save button to insert new String it is Successfully inserting but when any of other action is performed like updating or Deleting the existing one.. then my application just hanged and then nothing I able to do.
Please Help me to understand this problem and give me the solution for this..
Thanks
Fizzz...

Hi frank,
Thanks to reply me...
I'm refreshing table's iterator on each command button's action to reflect the changed result... and i'm sorry i mentioned two pages in my project.. actually these are two forms in the same page..which conditionally changed its renderer properties.. its working fine when only one form is renderred and the otherside when both are rendered then it is not working.
Hope this change will help you to understand the problem.. if something else you are looking for then please tell me..
Thanks
Fizzz...

CANT execute query with parameter on user defined tables using query genera

Dear All,
I have problem when executing query with parameter on user defined tables using query generator.
It seems SBO cannot accept parameter to query user defined tables.
I've tried these:
SELECT T0.U_Status FROM [@ST_PR_H] T0 WHERE T0.U_Status = [%0] --- this FAIL
I try to pass the value directly without using parameter and It works
SELECT T0.U_Status FROM [@ST_PR_H] T0 WHERE T0.U_Status = 2 --- this SUCCESS
This one works
SELECT * FROM RDOC T0 WHERE T0.width =[%0] --- this SUCCESS
and this one works too
SELECT * FROM RDOC T0 WHERE T0.width = 595 --- this SUCCESS
Is there anyone can help me ....???
Thanks,
Alfa

I generated this code using query wizard ....
SELECT T0.[U_Status] AS 'Document Status' FROM [dbo].[@ST_PR_H] T0 WHERE T0.[U_Status] = (N'2' )
and replaced the (N'2' ) with [%0]
SELECT T0.[U_Status] AS 'Document Status' FROM [dbo].[@ST_PR_H] T0 WHERE T0.[U_Status] = [%0]
and It worked ......
Thanks 4 all .....

Execute command with defined parameters

Similar Messages

Maybe you are looking for