Execute DBMS_JOB inside a stored procedure

Hi,
Could you please help me in writing a stored procedure to execute a DBMS_JOB in Oracle 10G.
I need to execute 6 procedures at the same time using a separe DBMS_JOB for each procedure.
Thanks,
Dinesh Jaganathan

What, exactly, do you want to do?
You can certainly submit 6 separate jobs in a stored procedure by making 6 calls to DBMS_JOB.SUBMIT. Those jobs would then start asynchronously when the transaction committed. Is that what you want to happen?
Justin

Similar Messages

Execute DBMS_JOBs inside a stored procedure

CREATE OR REPLACE PROCEDURE repl.RunAllJobs
IS
BEGIN
DECLARE
a job%TYPE;
BEGIN
DBMS_JOB.submit (a, 'repl.ExecuteSP1);');
DBMS_JOB.submit (a, ' repl.ExecuteSP2;');
DBMS_JOB.submit (a, 'repl.ExecuteSP3);');
DBMS_JOB.submit (a, ' repl.ExecuteSP4;');
END;
END RunAllJobs;
The problem is that the SP returns ( meaning shows completed ) after kicking off the jobs.
I want the SP to return ( showing completed ) only after all the jobs are completed successfully, else return error .

user10872550 wrote:
The problem is that the SP returns ( meaning shows completed ) after kicking off the jobs.
I want the SP to return ( showing completed ) only after all the jobs are completed successfully, else return error .Assuming you want to use DBMS_JOB itself for this - collect each job number output parameter as a separate variable. Commit the job submissions. Then loop, checking user_jobs for whether a job number still exists. If so, sleep and loop. If not, terminate.
E.g.
create or replace procedure DoStuff is
j1 number;
j2 number;
begin
--// submit jobs
DBMS_JOB.Submit( j1, ... );
DBMS_JOB.Submit( j2, ... );
--// kickoff jobs
commit;
--// wait for jobs to complete
loop
    --// check user_jobs for job number, using
    --// a custom JobNotFound() function
    exit when JobNotFound(j1) and JobNotFound(j2);
    --// if jobs still running, take a quick nap
    DBMS_LOCK.Sleep( 60 );
end loop;
--// jobs completed, continue processing
end;

How can i create a Global Temporary Table inside a Stored Procedure....

Hi...
I need to create a Global Temporary Table inside a Stored
Procedure....
I have no idea how to do that....
Please....if u can send me a sample, send to me....
Thanks a lot

To create a global temporary table inside a stored procedure,
the minimal syntax would be:
CREATE OR REPLACE PROCEDURE procedure_name
AS
BEGIN
EXECUTE IMMEDIATE 'CREATE GLOBAL TEMPORARY TABLE table_name'
|| '(column_name NUMBER)';
END procedure_name;
As Todd stated, it would probably be better to create the global
temporary table outside of the procedure:
SQL> CREATE GLOBAL TEMPORARY TABLE table_name
2 (column_name NUMBER);
Table created.
You can also specify things like ON COMMIT PRESERVE ROWS or ON
COMMIT DELETE ROWS.
It may be that there is something else, like a PL/SQL table of
records or a cursor, that would suit your needs better. It is
difficult to guess without knowing what you want to do with it.

Using ALTER SESSION inside a stored procedure.... not a good idea?

Hi,
I have two stored procedures, both of which are used to query a database to find a particular book, based on ISBN. One sproc searches our main product catalogue and the other searches our suppliers feed catalogues. The stored procedures are called from a C# application via a search tool and the user is able to search on either our catalogue or our suppliers. The appropriate procedure is called based on the users choices.
However, the following behaviour is observed
I search for an ISBN (is a varchar2 field, as isbn's may contain an X if the checksum digit equates to 10) on a feed, so uses the FEED SPROC. The book is found and returned to the app in about 0.5 seconds. I can repeat this as often as i like on different books etc. always works fine.
I then do the same search but against our own catalogue, so uses our CATALOGUE SPROC. Again the book is found quickly, and the search can be repeated with the same results.
If i then go back and run our FEED SPROC then the search time increases to about 3 minutes !
Both the feed and our catalogue is in the same database, although different schema's the connections will be pooled through our app server.
I can repliacte this every single time. I think i have narrowed doen the cause of this behaviour to a few lines of code in our CATALOGUE SPROC:
-- store values
select value into v_vch_NLS_COMP from nls_session_parameters nsp where nsp.parameter = 'NLS_COMP';
select value into v_vch_NLS_SORT from nls_session_parameters nsp where nsp.parameter = 'NLS_SORT';
-- Ensure case insensitivity throughout
EXECUTE IMMEDIATE 'ALTER SESSION SET NLS_COMP = LINGUISTIC';
EXECUTE IMMEDIATE 'ALTER SESSION SET NLS_SORT = BINARY_CI';
do other stuff
-- restore session variables
EXECUTE IMMEDIATE 'ALTER SESSION SET NLS_COMP = ' || v_vch_NLS_COMP;
EXECUTE IMMEDIATE 'ALTER SESSION SET NLS_SORT = ' || v_vch_NLS_SORT;
If i remove this code then all is well, so i am assuming that using ALTER SESSION inside a stored procedure is the cause of the problem as it would be changing the execution plan of the FEEDS SPROC in some manner? Any ideas? I know i can just rewrite the sproc to avoid using this coding, but wanted to understand if i am doing something wrong by using ALTER SESSION in this manner?
Any pointers would be appreciated.
John Thompson
Software Architect,
play.com
Edited by: user7186902 on 27-May-2009 03:51

Hello (and welcome),
It may be a case of having to create a linguistic index to facilitate the queries once you set these session level parameters, i.e..,
CREATE INDEX idx_01 ON tab ((NLSSORT(col1, 'NLS_SORT=BINARY_CI'))It would appear that the setting of those parameters is invalidating index searching on the current indexes.

Calling Stored procedure inside an Stored procedure

Hi,
I am working in oracle 9i. I want to call a stored procdure from another stored procedure.
Kindly provide me the example...
rgds.

having a pocedure called PRCD1,
Create or Replace Procedure PRCD2 IS
egin
PRCD1;
END;
cheers !!!It will for surely err out. You cannot use "EXECUTE" inside a stored procedure.
Here's how you do it:
SQL> create or replace procedure p1 is
2 begin
3    dbms_output.put_line('I am P1');
4 end;
5 /
Procedure created.
SQL> create or replace procedure p2 is
2 begin
3    dbms_output.put_line('I am P2');
4    p1;
5 end;
6 /
Procedure created.
SQL> set serveroutput on
SQL> exec p2
I am P2
I am P1
PL/SQL procedure successfully completed.
SQL>

SQL Server Free Text Search with multiple search words inside a stored procedure

I am trying to do a free text search. basically the search string is being sent to a stored procedure where it executes the free text search and returns the result.
If I search for red
flag, I want to return the results that matches both red and flag text.
Below is the query I use to return the results.
select * from customer where FREETEXT (*, '"RED" and "flag"')
This doesn't give me the desired result. Instead this one give the desired result.
select * from customer where FREETEXT (*, 'RED') AND FREETEXT (, 'FLAG')
My problem is since it's inside a stored procedure, I will not be able to create the second query where clause. I thought both query should return the same result. Am I doing something wrong here?

I am moving it to Search.
Kalman Toth Database & OLAP Architect
IPAD SELECT Query Video Tutorial 3.5 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Extract data in to excel inside a stored procedure

Hi,
Is there a way to extract data from a table in to excel inside a stored procedure and not using SSIS?
Thanks,
Preetha

Here's a similar, simpler, sample.
Sub TestMacro()
' Create a connection object.
Dim cnPubs As ADODB.Connection
Set cnPubs = New ADODB.Connection
' Provide the connection string.
Dim strConn As String
'Use the SQL Server OLE DB Provider.
strConn = "PROVIDER=SQLOLEDB;"
'Connect to the Pubs database on the local server.
strConn = strConn & "DATA SOURCE=(local);INITIAL CATALOG=NORTHWIND.MDF;"
'Use an integrated login.
strConn = strConn & " INTEGRATED SECURITY=sspi;"
'Now open the connection.
cnPubs.Open strConn
' Create a recordset object.
Dim rsPubs As ADODB.Recordset
Set rsPubs = New ADODB.Recordset
With rsPubs
' Assign the Connection object.
.ActiveConnection = cnPubs
' Extract the required records.
.Open "SELECT * FROM Categories"
' Copy the records into cell A1 on Sheet1.
Sheet1.Range("A1").CopyFromRecordset rsPubs
' Tidy up
.Close
End With
cnPubs.Close
Set rsPubs = Nothing
Set cnPubs = Nothing
End Sub
Finally, this answers you exact question.
Option Explicit
Sub Working2()
'USE [Northwind]
'GO
'DECLARE @return_value int
'EXEC @return_value = [dbo].[TestNewProc]
' @ShipCountry = NULL
'SELECT 'Return Value' = @return_value
'GO
Dim con As Connection
Dim rst As Recordset
Dim strConn As String
Set con = New Connection
strConn = "Provider=SQLOLEDB;"
strConn = strConn & "Data Source=LAPTOP\SQL_EXPRESS;"
strConn = strConn & "Initial Catalog=Northwind;"
strConn = strConn & "Integrated Security=SSPI;"
con.Open strConn
'Put a country name in Cell E1
Set rst = con.Execute("Exec dbo.TestNewProc '" & ActiveSheet.Range("E1").Text & "'")
'The total count of records is returned to Cell A5
ActiveSheet.Range("A5").CopyFromRecordset rst
rst.Close
con.Close
End Sub
Sub Working()
'USE [Northwind]
'GO
'DECLARE @return_value int
'EXEC @return_value = [dbo].[Ten Most Expensive Products]
'SELECT 'Return Value' = @return_value
'GO
Dim con As Connection
Dim rst As Recordset
Set con = New Connection
con.Open "Provider=SQLOLEDB;Data Source=LAPTOP\SQL_EXPRESS;Initial Catalog=Northwind;Integrated Security=SSPI;"
Set rst = con.Execute("Exec dbo.[Ten Most Expensive Products]")
'Results of SProc are returned to Cell A1
ActiveSheet.Range("A1").CopyFromRecordset rst
rst.Close
con.Close
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Unexpected Token: Error occuring inside a stored procedure

I get an unexpected token error when trying to compile below stored procedure. The error occurs on the exec pk_proof.pr_ProofAssets execution statement inside the stored procedure. Any reason why?
CREATE OR REPLACE PROCEDURE MONTHLY_ASSET (ln_business_dt_num IN NUMBER DEFAULT NULL,
                                           missing_tbl_name OUT NOCOPY VARCHAR2)
IS
   ln_business_dt_num NUMBER;
   missing_tbl_name VARCHAR2;
   no_tbl_name_found EXCEPTION;
   bad_date_value EXCEPTION;
   counts_not_matched EXCEPTION;
BEGIN
   IF ln_business_dt_num < 0 THEN
   RAISE bad_date_value;
   ELSE
     Select MAX(business_dt_num) into ln_business_dt_num
     FROM sasor.dp_ca_proof;
   if missing_tbl_name IS NOT NULL then
      raise no_tbl_name_found;
   end if;
   exec pk_proof.pr_ProofAssets('SLH_DST_ASSET', ln_business_dt_num, 'sasor_batch');

EXEC (short for EXECUTE) is an SQL*Plus command. Just remove it.

How to execute .sql file in Stored Procedure?

Hi,
I have an urgent requirement, where i have to execute .sql file form Stored Procedure.
This .sql file will have set of update statement. I need to pass value to this update statement.
Kindly please help me.
Regards,
Irfan

This is required as part of Data Migration where i have to do 100 of table's update. Each time update table will defer, so its better to have in separate script file (.sql). Can u paste some sample/syntax to exceute .sql file from stored procedure. I am new to this PL/SQL.
How have you determined that it's "better" to have seperate scripts? I assume you mean the table name will "differ" (and not "defer" - I assume that's just because English isn't your first language? no problem - I think I understand what you're asking).
So what I think you're asking is that you have dynamic table names but each table needs to be updated in the same way?
Question: Why do you have tables with different names that all need the same process doing to them?
Assuming it's a valid requirement (and 99% of the time doing dynamic coding implies it's not).... you could use dynamic code, rather than 'scripts'...
e.g.
create procedure update_table(tbl_name varchar2) is
begin
execute immediate 'update '||tbl_name||' set lastupdate = null';
end;
As you haven't bothered to provide a database version, any example code/data or explanation of what you're actually doing, you're not going to get any detailed answer. Please do take the time to read the FAQ and post appropriate details so people can help you.

Problem with execute SSIS package from stored procedure

Hi,
I would like to execute SSIS package from stored procedure. Therefore, I implemented sp which exec SSISDB.CATALOG.CREATE_EXECUTION method. When I try to test it from SSMS on remote server, I got error that
I was able to solve by adding “WITH EXECUTE AS …”. Then I got another error: The server principal "Domain\user" is not able to access the database "SSISDB" under the current security context. On Internet, I found a couple post that describe
how to access SSIS catalog (one of them by Ke Yang -
http://blogs.msdn.com/b/mattm/archive/2012/03/20/ssis-catalog-access-control-tips.aspx). It didn’t help. I’m still getting the error message.
How to debug this issue?
Any suggestion?
Thanks
SQL Server 2014 BI

SSMS does not propagate user credentials thus the error
Arthur
MyBlog
Twitter

Issue with Executing OS commands from Stored Procedure

I am trying to execute the scripts provided at :
http://github.com/xtender/XT_SHELL
provided by xtender user.
As required, I have asked my DBAs to grant privileges by executing the following scripts:
Begin
--change to needed permissions and execute
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/factiva/ODS/bin/CVIM_Rpt_ExportCSVFile’, 'read,write,execute' );
end;
/where CVIM_Rpt_ExportCSVFile is my script residing in the Unix server where my Oracle is installed.
The error I am facing when I try to execute the following command is:
select * from table(xt_shell.shell_exec('/var/scripts/CVIM_Rpt_ExportCSVFile',100))
Exception:the Permission (java.io.FilePermission /var/scripts/CVIM_Rpt_ExportCSVFile execute) has not been granted to ODS. The PL/SQL to grant this is dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )I have asked my DBA to also execute the following scripts: - But I still see the same error as above. I am not able to figure out whats going on. Can anyone pls help me out??
EXEC Dbms_Java.Grant_Permission('ODS', 'SYS:java.lang.RuntimePermission', 'writeFileDescriptor', '');
EXEC Dbms_Java.Grant_Permission(ODS', 'SYS:java.lang.RuntimePermission', 'readFileDescriptor', '');
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )

DUPLICATE
===============================================================
Issue with Executing OS commands from Stored Procedure
==============================================================

Query to get list of linked server tables referenced inside a stored procedure

Hi,
SQL Server 2005 sp4
I have a requirement to get list of linked server tables referenced insider a stored procedure
Ex:
Databases DB1 DB2
Tables: T1 T2
Use DB1
Go
Create proc P1
begin
select * from T1
select * from DB2.dbo.T2
end
I am looking for a query which can return a result with output as below. sp_depends is not helping here as it does not work for cross DB objects, any other thoughts.
Tables
T1,
DB2.dbo.T2

On SQL 2005, you will have to do it manually.
On SQL 2008 or later, you could have used sys.sql_expression_dependencies.
Erland Sommarskog, SQL Server MVP, [email protected]

How Create a Global Temporary Table inside a Stored Procedure?

Hi...
I need to create a Global Temporary Table inside a Stored
Procedure....
I have no idea how to do that....
Please....if u can send me a sample, send to me....
Thanks a lot

there are many ways to do this..
one u can use dbms_utility package to run ddl statements like
for ex:
declare
t varchar2(200):='order_no';
v number;
begin
--dbms_utility.exec_ddl_statement('select '||t||' into '||v||'
from
--ordermaster where rownum=1');
dbms_utility.exec_ddl_statement('create table cvt(t number)');
dbms_output.put_line(v);
end;
but the actual method(recommended) involves a bit coding using
dbms_sql package you will find examples on technet or metalink
to use this package..
I hope this helps
Narendra

Insert performance inside a stored procedure

Hi,
I have an insert statement that inserts approx 400,000 records. The insert executes in 7 seconds if I run it from my SQL command. But when the same insert is executed as part of stored procedure, it takes ~30 mins. This is not the case with all large inserts. The behavior is sporadic - it happens with different insert statement at different times.
Please advise how I can tune this.
Thanks,
Phani

Hello,
Post your procedure code here along with insert statement.
Regards

SSRS dataset throws error when another stored procedure is called inside dataset stored procedure

Hello;
I am using Report Build 3.0, I have a simple report which gets data using dataset which is created from a Stored Procedure. I have another stored procedure which updates the data in the table which is used for the report. I want to get the live data on report everytime
the report is run so that I call that stored procedure (sp_updatedata) inside my report dataset stored procedure and here where my report fails as it throws error while creating dataset.
Here is sample:
sp_updatedata (this only returns "Command(s) completed successfully"
Create Proce sp_getReportData
As
Begin
Exec sp_updatedata -- I call it to update the data before it displays on the report
Select * from customers
End
If I remove this line it works.
Exec sp_updatedata -- I call it to update the data before it displays on the report
Thanks
Essa Mughal

Hi MESSA,
According to your description, you create a dataset based on a stored procedure. In this procedure, it calls another procedure. Now it throws error when creating dataset. Right?
In Reporting Services, when creating dataset, all the query or stored procedure will be executed in SSMS. So if the procedure can be executed in SSMS, it supposed to be working in SSRS. However, it has a limitation in SSRS. In a dataset, it can only return
one result set.
In this scenario, I don't think it's the issue of calling other procedure inside of procedure. Because we tested in our local environment, it works fine. I guess the sp_updatedata returns a result set, and the "select * from customers" returns
another result set. This might be the reason cause the error.
Reference:
Query Design Tools in Report Designer SQL Server Data Tools (SSRS)
Reporting Services Query Designers
If you still have any question, please post the error message and the store procedure (sp_updatedata).
Best Regards,
Simon Hou

Execute DBMS_JOB inside a stored procedure

Similar Messages

Maybe you are looking for