Query to get list of linked server tables referenced inside a stored procedure

Hi,
SQL Server 2005 sp4
I have a requirement to get list of linked server tables referenced insider a stored procedure
Ex:
Databases DB1 DB2
Tables: T1 T2
Use DB1
Go
Create proc P1
begin
select * from T1
select * from DB2.dbo.T2
end
I am looking for a query which can return a result with output as below. sp_depends is not helping here as it does not work for cross DB objects, any other thoughts.
Tables
T1,
DB2.dbo.T2

On SQL 2005, you will have to do it manually.
On SQL 2008 or later, you could have used sys.sql_expression_dependencies.
Erland Sommarskog, SQL Server MVP, [email protected]

Similar Messages

Find all tables used in a stored procedure

Hi,
I have a requirement where i have to find all the tables used in a stored procedures from different databases.
Ex: i have a stored procedure where i use few tables from MASTER database and some from STAGE database.When i have written a query to find all tables used in the stored procedure, i am getting only those database table where i run the query and procedure
exists.
I have stored procedure SP1 in Master database, but i use the tables from both master and stage.
When i run this, i am getting the tables only from Master database but not from stage. i hope my requirement is clear.
I am trying to find all the tables from all databases used by a stored proc.
;WITH stored_procedures AS (
SELECT
o.name AS proc_name, oo.name AS table_name,
ROW_NUMBER() OVER(partition by o.name,oo.name ORDER BY o.name,oo.name) AS row
FROM sysdepends d
INNER JOIN sysobjects o ON o.id=d.id
INNER JOIN sysobjects oo ON oo.id=d.depid
WHERE o.xtype = 'P')
SELECT proc_name, table_name FROM stored_procedures
WHERE row = 1
ORDER BY proc_name
Please advice

Your question is not entirely clear. You need to run the query on different databases.
You may find this blog post helpful
How to get information about all databases without a loop
Check the last script in that blog post and modify to your particular purpose.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

SQL Server Free Text Search with multiple search words inside a stored procedure

I am trying to do a free text search. basically the search string is being sent to a stored procedure where it executes the free text search and returns the result.
If I search for red
flag, I want to return the results that matches both red and flag text.
Below is the query I use to return the results.
select * from customer where FREETEXT (*, '"RED" and "flag"')
This doesn't give me the desired result. Instead this one give the desired result.
select * from customer where FREETEXT (*, 'RED') AND FREETEXT (, 'FLAG')
My problem is since it's inside a stored procedure, I will not be able to create the second query where clause. I thought both query should return the same result. Am I doing something wrong here?

I am moving it to Search.
Kalman Toth Database & OLAP Architect
IPAD SELECT Query Video Tutorial 3.5 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

How can i create a Global Temporary Table inside a Stored Procedure....

Hi...
I need to create a Global Temporary Table inside a Stored
Procedure....
I have no idea how to do that....
Please....if u can send me a sample, send to me....
Thanks a lot

To create a global temporary table inside a stored procedure,
the minimal syntax would be:
CREATE OR REPLACE PROCEDURE procedure_name
AS
BEGIN
EXECUTE IMMEDIATE 'CREATE GLOBAL TEMPORARY TABLE table_name'
|| '(column_name NUMBER)';
END procedure_name;
As Todd stated, it would probably be better to create the global
temporary table outside of the procedure:
SQL> CREATE GLOBAL TEMPORARY TABLE table_name
2 (column_name NUMBER);
Table created.
You can also specify things like ON COMMIT PRESERVE ROWS or ON
COMMIT DELETE ROWS.
It may be that there is something else, like a PL/SQL table of
records or a cursor, that would suit your needs better. It is
difficult to guess without knowing what you want to do with it.

How to find the columns and tables used in a stored procedure?

Hi,
Can someone suggest how to find the columns and tables used within a stored procedure?
Thanks
VBK

For example:
SQL> create or replace
2    procedure p1
3      is
4          cnt number;
5      begin
6          select count(*) into cnt from emp;
7 end;
8 /
Procedure created.
SQL> select referenced_owner,
2          referenced_name
3    from dba_dependencies
4    where owner = 'SCOTT'
5      and name = 'P1'
6      and referenced_type = 'TABLE'
7 /
REFERENCED_OWNER               REFERENCED_NAME
SCOTT                          EMP
SQL> SY.

Using XI - RFC table and an Oracle stored procedure that returns a cursor.

I need to create an interface using XI between an RFC table and an Oracle stored procedure that returns a cursor. We are on oarcle 9.2 and SP12.
My stored procedure looks something like this:
CREATE OR REPLACE
PROCEDURE testproc_xi2 (p_recordset1 OUT SYS_REFCURSOR,
                                         in_quoteid IN varchar2 )
AS
BEGIN
OPEN p_recordset1 FOR
   SELECT q.quote_id,
                 q.modified_by,
                 q.quote_status,
                 q.total_cost
            FROM quote q
           WHERE q.quote_id = in_quoteid
             AND q.total_cost > 0 ;
END testproc_xi2 ;
My RFC has table and one import parameter .
I wanted to know how to create the data type for the ref cursor? and also for the table type in the RFC?
CAN XI handle multi rows coming from a Stored procedure? Are there any other alternative methods if this is not supported?Any pointers to this would be helpful.
I have called a Oracle SP from an RFC before, but that interface had one input parameter going to the stored procedure from the RFC and about 6 o/p parameters coming from the Stored procedure. This works fine.
Thanks for the help.
Mala

Mala,
i dont think there is anything called an rfc table...RFC stands for remote function call. That in essence would imply you need a rfc to jdbc connection.
yes XI can handle multiple rows cooming from the the stored procedure if you have them mapped appropriately.
Now as to how to create the data type within xi , you need to know what fields are going to be returned and whether they are nested and then just create them as you would for an xml
for ex
<Details>
<FirstName>
<LastName>
</Details>
that in xi would be smthing like
Details type of data occurence
FirstName type of data occurence
LastName type of data occurence.
Hope that helps.
If it does dont forget the points..:-)

How Create a Global Temporary Table inside a Stored Procedure?

Hi...
I need to create a Global Temporary Table inside a Stored
Procedure....
I have no idea how to do that....
Please....if u can send me a sample, send to me....
Thanks a lot

there are many ways to do this..
one u can use dbms_utility package to run ddl statements like
for ex:
declare
t varchar2(200):='order_no';
v number;
begin
--dbms_utility.exec_ddl_statement('select '||t||' into '||v||'
from
--ordermaster where rownum=1');
dbms_utility.exec_ddl_statement('create table cvt(t number)');
dbms_output.put_line(v);
end;
but the actual method(recommended) involves a bit coding using
dbms_sql package you will find examples on technet or metalink
to use this package..
I hope this helps
Narendra

TABLE list on linked server?

In SQL Developer, i can see a list of TABLEs in the Connections list, and see TABLE definition and data.
I have a DB Link providing access to a number of TABLEs on a different server. Is there a way to see a similar list of the available TABLE on the linked server?

There is a link at the top of the forum to the SQLDeveloper exchange where you can raise feature requests.
Post a link to your request back here so people can find it more easily to vote on it.
This also looks like the kind of thing which is amenable to an XML extension.

Getting List of SQL server and on selection of server get List of Databases using SMO

Hi,
I need to have functionality where I need to populate List of available SQL servers from local network, and when i select SQL server from list, get the list of Databases from that Server.
For this i referenced SQL SMO Dll's and placed two drop down, one lists Server names, and one lists Database names.
Dlls refered are:
Microsoft.SqlServer.ConnectionInfo.dll
Microsoft.SqlServer.Management.Sdk.Sfc.dll
Microsoft.SqlServer.Smo.dll
Microsoft.SqlServer.SqlClrProvider.dll
Microsoft.SqlServer.SqlEnum.dll
Above DLL's i have copied from SQL server SQL server 2008 installed location
C:\Program Files\Microsoft SQL Server\110\SDK\Assemblies
DLL version : 11.0.3000.0
Code i have used is:
private void MainForm_Load(object sender,
EventArgs e)
   DataTable dataTable = SmoApplication.EnumAvailableSqlServers(false);
   cmbServers.ValueMember = "Name";
   cmbServers.DataSource = dataTable;
//Now, load Databases on selection of Server combo box.
private void cmbServers_SelectedIndexChanged(object sender,
EventArgs e)
   cmbDatabases.Items.Clear();
   if (cmbServers.SelectedIndex != -1)
      string serverName = cmbServers.SelectedValue.ToString();
      Server server = new Server(serverName);
      try
         foreach (Database database in server.Databases)
            cmbDatabases.Items.Add(database.Name);
      catch (Exception ex)
         string exception = ex.Message;
It works where SQL server is installed, but in systems where no SQL server is installed, it is not working, it is not returning list of SQL server and so database list.
Query is> can you please help me in this regard, what i am missing here, do i need to install any client component to use this?, or anything else what i need to do to make this functionality work.
Thanks,
Hemal

Thanks Michael for replying.
I have gone through the reply, and the link on how to get the SMO library installed.
"To install the Client Tooks SDK without installing SQL Server, install Shared Management Objects from the SQL Server feature pack.
If you want to ensure that SQL Server Management Objects is installed on a computer that will run your application, you can use the Shared Management Objects .msi in the SQL Server feature pack."
I have few questions on "Shared Management Objects .msi"
Where do i get "Shared Management Objects .msi".
only installing this msi will install SMO?.
Can i ship this msi with my application installer?
do i need to install x86 on x86 system and x64 version of msi in x64 system, or x86 can work fine with both, my application
is x86 only.
Thanks,
Hemal

Query iView Does Not Display Sql Server Tables

I have a system connected to a SQL Server (2000 Enterprise) and the Connection Tests works properly.
When I start to create a Query iView, I get to the point where I must select a JDBC system and select tables from it. When I select the tree node of my system, it displays "Loading ..." and then this disappears and nothing is displayed for this system.
Funny thing, I can create a Stored Procedure iview for this system, and it displays the available stored procedures.
Any ideas of the problem?
Daniel

Hi Antony,
Upgrading from SP7 to SP9 fixed a lot of problems for me! It's worth trying.
Problems solved for me:
Page requests take about 2 minutes to display page (now within a few seconds)
KM SQL logging (30-50Mb per minute) problem fixed.
There are some problems upgrading to SP9, but searching this forum will help you in finding some solutions for this
Regards,
Noel

Query to get the name of the tables used in a View?

Hi,
Could you please help me in getting the name of the tables used in a perticular view?
Please help me out...
thnx in advance.
Thnx,
Bits
Edited by: Bits on Sep 14, 2009 2:15 PM

There is no data dictionary table that stores this directly.
- You could get the DDL used to create the view and parse that SQL. Depending on how complex the view might be, this could be relatively easy or highly complex.
- You could get a recursive list of the objects that the view depends on (from ALL_/USER_/DBA_DEPENDENCIES) and trace those dependencies back to all the tables that the view depends on. If your view calls functions, however, this may or may not be what you're looking for. If you are selecting from just one table in the FROM clause but you are calling a function that references a dozen tables, do you want one row? Or thirteen? What about tables referenced in a correlated subquery in the WHERE clause?
Justin

Get server output from pl/sql stored procedure

Hi Colleagues,
I would like to get and watch the server output of my PL/SQL stored procedure
when I run my java program and call it from. The Stored proc. uses "dbms_output.put_line".
If it is clearly and possible (or not), will you send me your answer!
Thanks a lot
Ulve

Hi,
You can redirect the standard output to the console (i.e., the SQL output) using the
DBMS_JAVA.SET_OUTPUT() method.
SQL> SET SERVEROUTPUT ON
SQL> call dbms_java.set_output (5000);But, the output is only printed when the stored procedure exits, and this setting works only for one call (i.e., the SQL call that immediately follows the invocation of DBMS_JAVA.SET_OUTPUT()). The minumum and default value is 2,000 characters and the maximum is 1,000,000 (1 million) characters. Notice the “SET SERVEROUTPUT ON” which enables displaying the outputs of stored procedures (Java or PL/SQL blocks) in SQL*Plus.
Kuassi http://db360.blogspot.com

Passing Tables back from Java Stored Procedures

Thomas Kyte has written (in reference to
trying to pass an array back from a stored
function call):
You can do one of two things (and both require the use of
objects). You cannot use PLSQL table types as JDBC cannot bind to
this type -- we must use OBJECT Types.
[snip]
Another way is to use a result set and "select * from
plsql_function". It could look like this:
ops$tkyte@8i> create or replace type myTableType as table of
varchar2 (64);
2 /
Type created.
ops$tkyte@8i>
ops$tkyte@8i>
ops$tkyte@8i> create or replace
2 function demo_proc2( p_rows_to_make_up in number )
3 return myTableType
4 as
5 l_data myTableType := myTableType();
6 begin
7 for i in 1 .. p_rows_to_make_up
8 loop
9 l_data.extend;
10 l_data(i) := 'Made up row ' | | i;
11 end loop;
12 return l_data;
13 end;
14 /
Function created.
ops$tkyte@8i>
ops$tkyte@8i> select *
2 from the ( select cast( demo_proc2(5) as mytableType )
3 from dual );
COLUMN_VALUE
Made up row 1
Made up row 2
Made up row 3
Made up row 4 [Image]
Made up row 5
So, your JDBC program would just run the query to get the data.
If the function "demo_proc2" cannot be called from SQL for
whatever reason (eg: it calls an impure function in another piece
of code or it itself tries to modify the database via an insert
or whatever), you'll just make a package like:
ops$tkyte@8i> create or replace package my_pkg
2 as
3
4 procedure Make_up_the_data( p_rows_to_make_up in
number ); 5 function Get_The_Data return myTableType;
6 end;
7 /
Package created.
ops$tkyte@8i>
ops$tkyte@8i> create or replace package body my_pkg
2 as
3
4 g_data myTableType;
5
6 procedure Make_up_the_data( p_rows_to_make_up in number )
7 as
8 begin
9 g_data := myTableType();
10 for i in 1 .. p_rows_to_make_up
11 loop
12 g_data.extend;
13 g_data(i) := 'Made up row ' | | i;
14 end loop;
15 end;
16
17
18 function get_the_data return myTableType
19 is
20 begin
21 return g_data;
22 end;
23
24 end;
25 /
Package body created.
ops$tkyte@8i>
ops$tkyte@8i> exec my_pkg.make_up_the_data( 3 );
PL/SQL procedure successfully completed.
ops$tkyte@8i>
ops$tkyte@8i> select *
2 from the ( select cast( my_pkg.get_the_data as mytableType
) 3 from dual );
COLUMN_VALUE
Made up row 1
Made up row 2
Made up row 3
And you'll call the procedure followed by a query to get the
data...
I have tried this, and it works perfectly.
My question, is what does the wrapper look
like if the stored function is written
in java instead of PL/SQL? My experiments
with putting the function in java have been
dismal failures. (I supposed I should also
ask how the java stored procedure might
look also, as I suppose that could be where
I have been having a problem)
null

Thanks for the response Avi, but I think I need to clarify my question. The articles referenced in your link tended to describe using PL/SQL ref cursors in Java stored procedures and also the desire to pass ref cursors from Java to PL/SQL programs. Unfortunately, what I am looking to do is the opposite.
We currently have several Java stored procedures that are accessed via select statements that have become a performance bottleneck in our system. Originally the business requirements were such that only a small number of rows were ever selected and passed into the Java stored procedures. Well, business requirements have changed and now thousands and potentially tens of thousands of rows can be passed in. We benchmarked Java stored procedures vs. PL/SQL stored procedures being accessed via a select statement and PL/SQL had far better performance and scaleable. So, our thought is by decouple the persistence logic into PL/SQL and keeping the business logic in Java stored procedures we can increase performance without having to do a major rewrite of the existing code. This leads to the current problem.
What we currently do is select into a Java stored procedure which has many database access calls. What we would like to do is select against a PL/SQL stored procedure to aggregate the data and then pass that data via a ref cursor (or whatever structure is acceptable) to a Java stored procedure. This would save us a significant amount of work since the current Java stored procedures would simple need to be changed to not make database calls since the data would be handed to them.
Is there a way to send a ref cursor from PL/SQL as an input parameter to a Java stored procedure? My call would potentially look like this:
SELECT java_stored_proc(pl/sql_stored_proc(col_id))
FROM table_of_5000_rows;
Sorry for the lengthy post.

How to get all parameter names along with their values in stored procedure which is being executed

Im using sql server 2012, is there any possible way to get all the parameters of a stored procedure along with the values passed to it.
I need these things to build a xml. I mean this should happen in the procedure which being executed and it should be common for all the procedures.
For example, let us suppose we have to procedures,
uspSave, @name='test' @age=20
uspDelete @id=2
now in uspSave procedure, i need to get @name, @age and the values 'test', 20 and in uspDelete, i should get @id with value 2.
For getting the column names, i tried this,
select parameter_name from information_schema.PARAMETERS where specific_name=OBJECT_NAME(@@procid)
now is it possible to loop through the result of above query and can we get the values.

I think you need running SQL Server Profiler to capture this info even in SQL Server 2012.
Best Regards,Uri Dimant SQL Server MVP,http://sqlblog.com/blogs/uri_dimant/
Blog : MS SQL Development and Optimization
Blog : Large
scale of database and cleansing

"table type" result from stored procedure (Oracle 10g) for physical service

Hello,
I'm trying to create a physical service based on a stored procedure which returns a table type like this:
SQL
-- create table
create table myTable ( "col1" VARCHAR2(250) not null enable, "filtercol1" VARCHAR2(250), "filtercol2" VARCHAR2(250), "sortcol1" VARCHAR2(250), "sortcol2" VARCHAR2(250), "sortcol3" VARCHAR2(250))
-- create return type
create or replace type myResultType as table of varchar2(250);
-- create function
create or replace function getResult(param1 in varchar2, param2 in varchar2, orderby in varchar2) return myResultType as
query_str VARCHAR2(1000);
myResult myResultType;
begin
query_str := 'select m.col1 from myTable m where m.filtercol1 like :param1 and m.filtercol2 like :param2 order by ' || orderby;
execute immediate query_str bulk collect into myResult using param1, param2;
return myResult;
end getResult;
The wizard for creating the physical service complains that it can't find the return type and I have to create a schema by myself. How should it look like? I can't find a sample in the documentation.
Thanks for any help,
Guido

Ok, now the wizard produces something like this:
(::pragma function <f:function xmlns:f="urn:annotations.ld.bea.com" visibility="protected" kind="library" isPrimary="false" nativeName="GETRESULT" nativeLevel2Container="MY_SCHEMA" style="storedProcedure">
<nonCacheable/>
<params xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdt="http://www.w3.org/2004/07/xpath-datatypes" xmlns:pn1="ld:physical/SQLServices/MY_TMP_TABLE" >
<param name="RETURN_VALUE" kind="return" xqueryType="pn1:MY_TMP_TABLE" nativeTypeCode="0" nativeType="RowSet"/>
<param name="RETURN_VALUE" kind="out" xqueryType="pn1:MY_TMP_TABLE" nativeTypeCode="0" nativeType="RowSet"/>
<param name="PARAM1" kind="in" xqueryType="xs:string" nativeTypeCode="12" nativeType="VARCHAR2"/>
<param name="PARAM2" kind="in" xqueryType="xs:string" nativeTypeCode="12" nativeType="VARCHAR2"/>
<param name="ORDERBY" kind="in" xqueryType="xs:string" nativeTypeCode="12" nativeType="VARCHAR2"/>
</params>
</f:function>::)
declare procedure f1:GETRESULT($PARAM1 as xs:string, $PARAM2 as xs:string, $ORDERBY as xs:string) as schema-element(t1:GETRESULT) external;
Then WorkSpace Studio complains about: "... error: cos-element-consistent: Type of 'RETURN_VALUE' is inconsistent with another element with the same name in this content model. "
If I rename one RETURN_VALUE to RETURN_VALUE1 (the param name and in the schema file) the error is gone, but if I try to test the method I get:
com.bea.dsp.das.exception.DASException: weblogic.xml.query.exceptions.XQuerySagaException: {bea-err}UPD003: Update failure: mixed outcome, update error dispatched (updateid=SAGA_596ba32b1ff8d8a4:181f0b20:11f92ed2529:-7fe2): java.lang.RuntimeException: Konflikt bei Parametertyp
     at com.bea.dsp.das.ejb.EJBClient.invokeOperation(EJBClient.java:160)
     at com.bea.dsp.das.DataAccessServiceImpl.invokeOperation(DataAccessServiceImpl.java:171)
     at com.bea.dsp.das.DataAccessServiceImpl.invoke(DataAccessServiceImpl.java:122)
     at com.bea.dsp.ide.xquery.views.test.QueryExecutor.invokeFunctionOrProcedure(QueryExecutor.java:121)
     at com.bea.dsp.ide.xquery.views.test.XQueryTestViewContent.getFunctionExecutionResult(XQueryTestView.java:1006)
     at com.bea.dsp.ide.xquery.views.test.XQueryTestViewContent.executeFunction(XQueryTestView.java:1134)
     at com.bea.dsp.ide.xquery.views.test.XQueryTestViewContent.widgetSelectedImpl(XQueryTestView.java:1807)
     at com.bea.dsp.ide.xquery.views.test.XQueryTestViewContent.access$300(XQueryTestView.java:159)
     at com.bea.dsp.ide.xquery.views.test.XQueryTestViewContent$3.run(XQueryTestView.java:1535)
     at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:67)
     at com.bea.dsp.ide.xquery.views.test.XQueryTestViewContent.widgetSelectedBusy(XQueryTestView.java:1538)
     at com.bea.dsp.ide.xquery.views.test.XQueryTestViewContent.widgetSelected(XQueryTestView.java:1500)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:90)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:928)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3348)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2968)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1930)
     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1894)
     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:422)
     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
     at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:95)
     at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:92)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:68)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.eclipse.core.launcher.Main.invokeFramework(Main.java:339)
     at org.eclipse.core.launcher.Main.basicRun(Main.java:283)
     at org.eclipse.core.launcher.Main.run(Main.java:984)
     at org.eclipse.core.launcher.Main.eclipse_main(Main.java:959)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.m7.installer.util.NitroxMain$1.run(NitroxMain.java:39)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
"Konflikt bei Parametertyp" means something like: parameter type conflict
Best regards,
Guido

Query to get list of linked server tables referenced inside a stored procedure

Similar Messages

Maybe you are looking for