Execute function module from Custom Table Value?
Hi,
I have custom table with following field
FUNNAME CHAR 1000
That contains records like the following
CALL FUNCTION 'ZMATF' EXPORTING MATNR = P_MATNR IMPORTING MATDESCRIPTION = V_MATERIALDESC.
CALL FUNCTION 'Y_CHECK_EXIT' EXPORTING USEREXIT = 'EFNDTAXWAR' IMPORTING EXECUTE = EXECUTE TABLES I_ZA01 = I_ZA01.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING WAIT = 'X'.
CALL FUNCTION 'RS_TABLE_LIST_CREATE' EXPORTING TABLE_NAME = TABNAME.
My requirement is according some of the user conditions i need to select entry from this table and execute the corresponding function module
I tried to use GENERATE SUBROUTINE POOL itab NAME name. But this have limitation of 36 subroutine pools for one program.
Any info highly appreciated.
aRs
If you can put the name of the FM in a variable and the parameters and exceptions in separate internal tables, then you can call the function modules using the statement:
<b>call function NAME
parameter-table
PARA_TAB
exception-table
EXCP_TAB.</b>
See a small example:
Example
type pools ABAP.
data NAME type STRING value `READ_SPFLI_INTO_TABLE`.
data PARA_TAB type ABAP_FUNC_PARMBIND_TAB.
data PARA_LINE like line of PARA_TAB.
data EXCP_TAB type ABAP_FUNC_EXCPBIND_TAB.
data EXCP_LINE like line of EXCP_TAB.
data CARRIER type SPFLI-CARRID.
data JTAB type SPFLI_TAB.
CARRIER = 'XYZ'.
PARA_LINE-NAME = 'ID'.
PARA_LINE-KIND = ABAP_FUNC_EXPORTING.
get reference of CARRIER into PARA_LINE-VALUE.
append PARA_LINE to PARA_TAB.
PARA_LINE-NAME = 'ITAB'.
PARA_LINE-KIND = ABAP_FUNC_IMPORTING.
get reference of JTAB into PARA_LINE-VALUE.
append PARA_LINE to PARA_TAB.
EXCP_LINE-NAME = 'NOT_FOUND'.
EXCP_LINE-VALUE = 1.
insert EXCP_LINE into table EXCP_TAB.
EXCP_LINE-NAME = 'OTHERS'.
EXCP_LINE-VALUE = 4.
insert EXCP_LINE into table EXCP_TAB.
call function NAME
parameter-table
PARA_TAB
exception-table
EXCP_TAB.
case SY-SUBRC.
when 1.
message id SY-MSGID type SY-MSGTY number SY-MSGNO.
when 2.
message E888(SABAPDOCU) with 'Error in function module'.
endcase.
REgards,
Ravi
Similar Messages
-
Execute function from custom table value ?
Hi,
I have custom table with following field
FUNNAME CHAR 1000
That contains records like the following
CALL FUNCTION 'ZMATF' EXPORTING MATNR = P_MATNR IMPORTING MATDESCRIPTION = V_MATERIALDESC.
CALL FUNCTION 'Y_CHECK_EXIT' EXPORTING USEREXIT = 'EFNDTAXWAR' IMPORTING EXECUTE = EXECUTE TABLES I_ZA01 = I_ZA01.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING WAIT = 'X'.
CALL FUNCTION 'RS_TABLE_LIST_CREATE' EXPORTING TABLE_NAME = TABNAME.
My requirement is according some of the user conditions i need to select entry from this table and execute the corresponding function module
Any info highly appreciated.
aRsHi,
I believe it should not be a problem...
As the subroutine is not physically created in the program..
Also check this link for a sample program..
http://help.sap.com/saphelp_46c/helpdata/EN/9f/db999535c111d1829f0000e829fbfe/frameset.htm
Thanks,
Naren -
Hi All,
Can any one tell me is there any Remote function module to update the values of components in STPO table while creating Sales order BOM, Material BOM, and WBS BOM. For example I want to update the Spare Part Indicator for Item components based on Plant.
Please do the needful..
Regards
YathishFor material bom: CSAP_MAT_BOM_CREATE
and CSAP_ORD_BOM_CREATE for Order BOM.
Regards,
Ravi -
Hi. i used Function module to change Characteristic values of a sales order
hi. i used Function module to change Characteristic values of a sales order..
but sales order's Characteristic values didn't change.
And the Function module doesn't occur any log message.
please tell me wrong code, and how to solve this problem.
if i have wrong method, what data can i pass to change the characteristic values
DATA: LT_E1CUVAL TYPE TABLE OF E1CUVAL.
DATA: WA_E1CUVAL TYPE E1CUVAL.
DATA: LS_CFG_HEAD LIKE CUXT_CUCFG_S,
LS_INSTANCES LIKE CUXT_CUINS_S,
LS_VALUES LIKE CUXT_CUVAL_S,
LS_E1CUCFG LIKE E1CUCFG,
LS_E1CUINS LIKE E1CUINS,
LS_E1CUVAL LIKE E1CUVAL,
LS_PROFILE LIKE E1CUCOM,
LS_VBAP LIKE VBAP,
L_CUOBJ LIKE INOB-CUOBJ,
L_ATINN LIKE CABN-ATINN.
DATA: LT_INSTANCES LIKE CUXT_CUINS_S OCCURS 0,
LT_PART_OF LIKE CUXT_CUPRT_S OCCURS 0,
LT_VALUES LIKE CUXT_CUVAL_S OCCURS 0,
LT_VAR_KEYS LIKE CUXT_CUVK_S OCCURS 0,
LT_KSML LIKE KSML OCCURS 0 WITH HEADER LINE,
BEGIN OF LT_CLINT OCCURS 0,
CLINT LIKE KSSK-CLINT,
END OF LT_CLINT.
DATA: LT_CUIB LIKE CUIB_CUOBJ_S OCCURS 0 WITH HEADER LINE.
DATA: E_ROOT_INSTANCE TYPE CUXT_INSTANCE_NO.
DATA: EV_ROOT_PERSIST_ID TYPE IBEXTINST_DATA-EXT_INST_ID.
DATA: EV_CFG_HAS_CHANGED TYPE XFELD.
DATA: EV_HANDLE_APPL_LOG TYPE BALLOGHNDL.
DATA: L_CUOBJ_NEW TYPE CUOBJ.
DATA: L_OWNER TYPE IBXX_BUSINESS_OBJECT.
REFRESH LT_E1CUVAL.
CLEAR LS_VBAP.
SELECT SINGLE CUOBJ INTO CORRESPONDING FIELDS OF LS_VBAP
FROM VBAP WHERE VBELN = I_VBELN
AND POSNR = I_POSNR.
IF SY-SUBRC <> 0.
RAISE INSTANCE_NOT_FOUND.
ENDIF.
REFRESH LT_CUIB. CLEAR LT_CUIB.
LT_CUIB-INSTANCE = LS_VBAP-CUOBJ.
APPEND LT_CUIB.
CALL FUNCTION 'CUCB_INITIALIZER'
EXPORTING
IT_INSTANCES = LT_CUIB[].
CALL FUNCTION 'CUXI_GET_SINGLE_CONFIGURATION'
EXPORTING
I_ROOT_INSTANCE = LS_VBAP-CUOBJ
IMPORTING
E_CFG_HEAD = LS_CFG_HEAD
ES_PROFILE = LS_PROFILE
ET_RETURN = ET_RETURN
TABLES
E_TAB_INSTANCES = LT_INSTANCES
E_TAB_PART_OF = LT_PART_OF
E_TAB_VALUES = LT_VALUES
E_TAB_VAR_KEYS = LT_VAR_KEYS
EXCEPTIONS
INVALID_INSTANCE = 1
NO_ROOT_INSTANCE = 2
INSTANCE_IS_A_CLASSIFICATION = 3
INTERNAL_ERROR = 4
NO_PROFILE_FOUND = 5
INVALID_DATA = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
CASE SY-SUBRC.
WHEN 1.
RAISE INSTANCE_NOT_FOUND.
WHEN 3.
RAISE INSTANCE_IS_A_CLASSIFICATION.
WHEN OTHERS.
RAISE INVALID_DATA.
ENDCASE.
ELSE.
LOOP AT LT_VALUES INTO LS_VALUES.
IF LS_VALUES-CHARC = 'SAP_MILLCA_PACKAGING'
OR LS_VALUES-CHARC = 'PD_CA_PACKING_DM'.
LS_VALUES-VALUE = '7100010'. "This is test data
MODIFY LT_VALUES FROM LS_VALUES.
ELSE.
DELETE LT_VALUES WHERE CHARC = LS_VALUES-CHARC.
ENDIF.
CLEAR LS_VALUES.
ENDLOOP.
ENDIF.
영업정보 특성 변경
CALL FUNCTION 'CUXI_SET_SINGLE_CONFIGURATION'
EXPORTING
I_CFG_HEADER = LS_CFG_HEAD
I_ROOT_INSTANCE = LS_VBAP-CUOBJ
I_PLANT =
I_STRUCTURE_EXPLOSION_DATE =
I_STRUCTURE_EXPLOSION_APPL_ID =
I_LOGSYS =
IS_PROFILE = LS_PROFILE
IV_ONLY_SINGLE_LEVEL =
IV_HANDLE_APPL_LOG =
IV_OBJECT_APPL_LOG = 'CIF'
IV_SUBOBJECT_APPL_LOG = 'T_CNFG'
IMPORTING
E_ROOT_INSTANCE = E_ROOT_INSTANCE
EV_ROOT_PERSIST_ID = EV_ROOT_PERSIST_ID
EV_CFG_HAS_CHANGED = EV_CFG_HAS_CHANGED
EV_HANDLE_APPL_LOG = EV_HANDLE_APPL_LOG
ET_RETURN = ET_RETURN
TABLES
I_TAB_INSTANCES = LT_INSTANCES
I_TAB_PART_OF = LT_PART_OF
I_TAB_VALUES = LT_VALUES
I_TAB_VAR_KEYS = LT_VAR_KEYS
I_TAB_BLOB =
EXCEPTIONS
NO_CONFIGURATION_DATA = 1
NO_ROOT_INSTANCE = 2
INVALID_INSTANCE = 3
INSTANCE_IS_A_CLASSIFICATION = 4
INTERNAL_ERROR = 5
NO_PROFILE_FOUND = 6
INVALID_DATA = 7
OTHERS = 8
IF SY-SUBRC <> 0.
CASE SY-SUBRC.
WHEN 1.
RAISE NO_CONFIGURATION_DATA.
WHEN 3.
RAISE NO_ROOT_INSTANCE.
WHEN 3.
RAISE INVALID_INSTANCE .
WHEN 3.
RAISE INSTANCE_IS_A_CLASSIFICATION.
WHEN 3.
RAISE INTERNAL_ERROR.
WHEN OTHERS.
RAISE INVALID_DATA.
ENDCASE.
ENDIF.
COMMIT WORK.
save configuration with next commit
CLEAR: LS_INSTANCES.
READ TABLE LT_INSTANCES INTO LS_INSTANCES INDEX 1.
L_OWNER-OBJECT_TYPE = LS_INSTANCES-OBJ_TYPE.
L_OWNER-OBJECT_TYPE = 'PVS_POSVAR'.
L_OWNER-OBJECT_KEY = LS_INSTANCES-OBJ_KEY.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
EXPORTING
ROOT_INSTANCE = LS_VBAP-CUOBJ
ROOT_OBJECT = L_OWNER
IMPORTING
NEW_INSTANCE = L_CUOBJ_NEW
EXCEPTIONS
INVALID_INSTANCE = 1
INVALID_ROOT_INSTANCE = 2
NO_CHANGES = 3
OTHERS = 4.
IF SY-SUBRC > 1 AND SY-SUBRC <> 3.
CLEAR LS_VBAP-CUOBJ.
RAISE INTERNAL_ERROR.
ELSEIF SY-SUBRC = 1.
LS_VBAP-CUOBJ = L_CUOBJ_NEW.
ENDIF.
What's wrong?
help me to solve this problem.
Thanks a lot.<b>SD_SALES_DOCUMENT_READ</b> Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
<b>SD_SALES_DOCUMENT_READ_POS</b> Reads sales document header and item material: tables VBAK, VBAP-MATNR
<b>SD_DOCUMENT_PARTNER_READ</b> partner information including address. Calls SD_PARTNER_READ
<b>SD_PARTNER_READ</b> all the partners information and addresses
<b>SD_DETERMINE_CONTRACT_TYPE</b>
In: at least VBAK-VBELN
Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
<b>SD_SALES_DOCUMENT_COPY</b>
<b>RV_ORDER_FLOW_INFORMATION</b> Reads sales document flow of sales document after delivery and billing
SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
SD_PACKING_PRINT_VIEW
SD_DELIVERY_VIEW Data collection for printing
called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
regards
vinod -
Call an ABAP program or a function module from command prompt/python script
Dear All,
I want to call a function module/ABAP program from command prompt or a python script.
Let me explain with an example.
There is a function module "z_add" that takes two integers as input parameters and generates their sum.
the sum is the output parameter.
Now i want to call this function module from command prompt / python script and pass parameters to this function module.
In return i must get the sum(i.e. the output of function module).
I tried using STARTRFC ,was able to call the FM but could not get the return value(output) from FM.
Can you please provide me the code of such a function module and the method to call it thereby passing parameters and getting the sum.
Thanks and regards,
Gaurav
Edited by: gauravkec2005 on Mar 4, 2010 7:41 AMthank you both! helpful answers! :o)
anyway!
i have written the program which is called from the SAPScript:
/: PERFORM GET_VATNUMBER IN PROGRAM ZFI_F140_OPERATIONS
/: USING &BKPF-BUKRS&
/: CHANGING &VATNUMBER&
CE VAT Registration No : &VATNUMBER&
REPORT zfi_f140_operations.
FORM get_vatnumber TABLES in_par STRUCTURE itcsy
out_par STRUCTURE itcsy.
DATA: lv_co_code TYPE bukrs,
lv_vat_no TYPE stceg.
READ TABLE in_par WITH KEY name = 'BKPF-BUKRS'.
MOVE in_par-value TO lv_co_code.
SELECT SINGLE stceg FROM t001
INTO lv_vat_no WHERE bukrs = lv_co_code.
out_par-name = 'VATNUMBER'.
WRITE lv_vat_no TO out_par-value.
CONDENSE out_par-value.
MODIFY out_par INDEX 1.
ENDFORM.
it is not working and i cannot work out why...
i have not been ABAPing for very long but have had a go....
any thoughts as to what i have done wrong?
or point me where i should be looking? thank you! -
Executing Function Module SXI_GET_SLDDATA
Executing Function Module SXI_GET_SLDDATA with input IM_SLD_NAMESPACE = " " gives following message in EX_ERROR_TEXT
Connection to SLD not possible: Exception in SLD client: AbapSLDRequestHandler.ping(): server connection ***failed *** on Fri Feb 01 15:50:22 GMT+05:30 2008
Can some one please adise how do I get list of business systems defined in SLD in the output table EX_BUSINESS_SYSTEMS ?
Please suggest a fresh approach to get any output from this FM including any particular settings that need to be done in trasaction rz70 Visual Admin of WAS, Hostfiles in respective communicating serversHi Catherine ,
The function module uses assorted tables in import parameters and hence can not be tested as others.
SAP provides a report CRM_ORDER_READ to test the function module.
Thanks.
Praveen. -
Crystal Reports Based on SAP Function Module and Transperant Tables
Hi,
I need to develop reports based on SAP trasperant tables and to filter the records I require to use one of the function module in SAP.
I have created parameters in Crystal reports that are required for the function to execute and are included in the where clause of the query. This helped the fuction to get those parameters and execute it.
The thing is that the fuction works fine with one set of parameters and gives accurate results both in SAP and Crystal Reports.
But fails for other set of parameters.
It works fine when we directly execute function in SAP produces a record set. But, when we pass those parameters from Crystal Reports it fetches no data.
Can anybody tell me the exact procedure to use function module and transperent tables together in Crystal Reports ?
Thanks in Advance.
Niwas JoshiHi,
This is going to be hard to explain, however you need to recognize that the function has input and possibly output (export) parameters. Crystal Reports is able to work with these parameters. However it is up to you to figure out how these parameters are used effectively to give you the correct results when joining the function with other data sources such as transparent tables.
If you're using transparent tables and functions in a Crystal Report, then you need to link these objects in such a way so that a left outer join for example is using the function's output parameters to join to the transparent table equivalent fields. However if the table is the starting point then the joins from the table should join the Input parameters of your function.
you can set these joins in the Database menu | Database Expert | Links of Crystal Reports. -
Call an Function Module from BSP page to import an CSV file to internal tab
Hi Experts,
I am working on creating a web application in BSP which will call the function module ALSM_EXCEL_TO_INTERNAL_TABLE.
This function module imports an excel file into an internal table.
Since this is the first time I am working on BSP I am not sure how to call this FM from event handler tab in BSP page.
What I could gather from previous posts is that we need to create an attribute which should take the value of the export parameter of the function module.But I am kind of messed up on this.
Could u guys please help ,I would be extremely grateful.Points will be assigned for sure
Thanking in anticipation
AnkitCould you please let me know how I can call an abap function module from a transformation? (from abap xslt program). I know how we can call methods of a class from the transformations, but no idea how we can call function modules. Any suggestions or a sample code snippet towards this will be very useful for me.
Thanks,
Shashi. -
Calling a function module from APO Macro
Hi,
Can I call a function module from a macro directly without going through the user exit? If so, how should I pass the parameters to the function module? I don't have to get the results back to macro.
RegardsHi Asokan - you can call a function module directly from a macro providing it is designed to be called from a macro. For example if you are in the Macrobuilder and use the menu path Edit -> Edit User Function then you will get a list of existing function modules that you can call directly by inserting a Operator/function into your macro. If you want to call a function module not listed in the User Function drop down list then you will either need the user exit or create a custom function module as a wrapper and register the wrapper function module in the Edit User Function menu path. Calling a function module will always return a value - but you can choose to ignore that value depending on how you build your macro.
Regards
Andy -
Calling function modules from a BSP page
Hi all
How do we call function modules from a BSP page.
regards,
PaulOk, You want to construct the URL pointing to a BW report and want to execute the same when a button is clicked right? if yes here is the answer.
for constructing the BW query URL
http://<bwserver>:<port>/sap/bw/BEx?sap-language=ENCMD=LDOC&infocube=<cube anme>&query=<query name>&var_name_1=<variable name1>&var_value_ext_1=<variable value 1>&var_name_2=<variable name2>&var_value_ext_2=<variable value 2>
(for more info on how to pass parameters to BW query URL refer to the BW web designer reference manual which can be found at http://services.sap.com/bw)
and for executing this from a button use onclientclick property of htmlb:button along with window.open
<htmlb:button id ="BWQ"
onClientClick = "javascript:window.open("<%= BW_URL %>" );"/>
Hope this is clear.
Regards
Raja -
CNTL_ERROR while calling a function module from Java webdynpro
I am calling a RFC function module from javawebdynpro app
which inturn calls a function module performing BDC on CAPP transaction. When I run this from SE37 of the same system or a different system everything works fine. But when called from Java webdynpro app, it raises a CNTL_ERROR exception and creates a short dump.
Any help on this is highly appreciatedGood catch, BI Learner. This was exactly it: when assigning the values from SOURCEFIELDS directly to the import/export parameters, you have to make sure that the types are EXACTLY the same, otherwise it will not work (the routine stops with an error when calling the FM, but there is no dump).
Therefore, to solve my problem, I created the declarations precisely as expected by the FM and assigned the values to these fields:
DATA:
SOURCEVAL TYPE /BIC/OIINVQTY,
SOURCEUOM TYPE /BIC/OIUSUOM,
USITM TYPE /BIC/OIUSITM,
TARGETUOM TYPE /BIC/OIUSUOM,
CONVERTED_COST TYPE /BIC/OIINVQTY.
DATA PRODUCTION_UOM TYPE /BIC/OIUSUOM.
" get the Production UOM
SELECT SINGLE I~/BIC/USPRDUOM
FROM /BIC/PUSITM AS I
INTO PRODUCTION_UOM
WHERE I~/BIC/USITM = SOURCE_FIELDS-/BIC/USITM AND I~OBJVERS = 'A'.
IF ( SY-SUBRC = 4 ). " no records found
"RAISE PARTNO_NOT_FOUND.
RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
ENDIF.
" load the parameters
SOURCEVAL = SOURCE_FIELDS-/BIC/USFRZMFC.
SOURCEUOM = SOURCE_FIELDS-BASE_UOM.
USITM = SOURCE_FIELDS-/BIC/USITM.
" then you can call the FM
CALL FUNCTION 'Z_CA_CONVERT_US_COST'
EXPORTING
PSOURCEVAL = SOURCEVAL
PSOURCEUOM = SOURCEUOM
PUSITM = USITM
PTARGETUOM = PRODUCTION_UOM
IMPORTING
PTARGETVAL = CONVERTED_COST
EXCEPTIONS
CONVERSION_NOT_MAINTAINED = 1
PARTNO_NOT_FOUND = 2
OTHERS = 3.
" ... [do the rest]
Thanks for your help,
Dennis -
Call ABAP function module from script?
Hi,
I have an ABAP function module, which works fine when I call it in a transformation.
Since I don't need to execute this function for each record but rather for each file I process, I would like to move the call from the DataFlow to a script in the WorkFlow. When I click on the 'functions' button the ABAP FM is available in my SAP Datastore, so I drag and drop it into my script. I also make sure to populate all required variables.
There are no error messages or warning when I check my job definition.
When I execute it, I get the following RFC error:
Function call <xxx ( abcd ) > failed, due to error <150413>: <RFC CallReceive exception <FUNCTION_NOT_FOUND>.>.
Is it just not possible to call an RFC enabled function module in SAP from a script or am I doing something wrong here?
Thanks,
Jan.Could you please let me know how I can call an abap function module from a transformation? (from abap xslt program). I know how we can call methods of a class from the transformations, but no idea how we can call function modules. Any suggestions or a sample code snippet towards this will be very useful for me.
Thanks,
Shashi. -
Function module to find charateristic values
hi all,
i need to find charateristic value and characteristic description for the given class type and batch number (CHARG) of a material.. is there any function module that gives these value because this value r not stored in the tables..
thanks in advance,
aswin.Hi,
Please check this FM.
VC_I_GET_CONFIGURATION
CUCB_GET_CONFIGURATION
call function 'VC_I_GET_CONFIGURATION'
exporting
INSTANCE = vbap-cuobj
LANGUAGE = SY-LANGU
TABLES
CONFIGURATION = i_config
EXCEPTIONS
INSTANCE_NOT_FOUND = 1
INTERNAL_ERROR = 2
NO_CLASS_ALLOCATION = 3
INSTANCE_NOT_VALID = 4
OTHERS = 5.
OR
data: i_char type table of comw with header line.
* Retrieve Characteristics.
call function 'CUD0_GET_VAL_FROM_INSTANCE'
exporting
instance = vbap-cuobj
tables
attributes = i_char
exceptions
instance_not_found = 1.
Regards,
Ferry Lianto -
How to call function module from IP
Hi
I need to trigger the process chain from the input ready queries in Bex analyzer. I figured out that I need to call RSPC_API_CHAIN_START.
How do we go about in calling the above function module in IP.
Thanks in advance
IHi Matt
Thanks for your response, it was very productive at the right time as we saw our process chain running indefinetly. With selecting all chars to be changed, it ran just once with no errors.
what is TA ? I know rsplan- transaction code for the planning modeler.
Can you tell me how can we call function module in custom exit planning function.
Where should I embed the code
CALL FUNCTION 'RSPC_API_CHAIN_START'
EXPORTING
I_CHAIN = 'ZPC_CCATOPCA'.
I_T_VARIABLES =
I_SYNCHRONOUS =
I_SIMULATE =
I_NOPLAN =
IMPORTING
E_LOGID =
EXCEPTIONS
FAILED = 1
OTHERS = 2
thanks in advance -
How to call a ECC 6 Function module from BI 7 process chain
Hi BI Gurus
I wann to push the data from infocube to ECC 6 ( Tcurr) table on a daily basis, and we have a function module written in ABAP and this FM is in ECC 6 sytem and we need to call this function module from BI inorder to update the TCURR table.
I used ABAP programm in Process chain but i failed as i dint see any functionality for FM. i could see only abap programm.
I need any you advise on this.
thanks in advanceHi,
If you are able to see the ABAP report of ECC 6, this ABAP report will inturn call this function module.
Call the report in process chain.
Maybe you are looking for
-
Does anyone know how to get the Dell 5100cn printer working on Lion? Thanks.
-
I have lost the google toolbar in Safari. How do I get it back. Reset Safari does nor help.
-
Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied any one has a solution?? please...
-
Que 4 formats "Adobe média encoder cs 5.5" MAC OS X
Bonjour à toute la communauté Adobe. Je viens vers vous aujourd'hui car j'ai un soucis avec Adobe média encoder cs5.5 sur MAC OS X. Comme marqué dans le titre, le logiciel ne me propose que 4 formats d'export pour les vidéos ce qui m'embête un peu ca
-
Can someone explain the difference between "sync only checked songs and music" and "manually manage music and videos" in the Summary options section? I just did a sync to bring in a ringtone and lost all my music - I had "sync only..." selected. Am I