Execute report RMMVRZ00 with variants

Hi Experts,
Could someone explain how to execute report RMMVRZ00 with variants.
Report RMMVRZ00 is similar to transaction MM60.
I am checking how to execute this report with variants.
Thank you

The following link would help in creating variants
[Creating Report Variants|http://help.sap.com/saphelp_45b/helpdata/en/73/69ee7d55bb11d189680000e829fbbd/content.htm]
If you have any specific requirement with variant, please post again

Similar Messages

  • Background Report Program with Variants to be Overwritten

    I have an Following Scenario.
    I have an Report program with the Selection Screen displaying an Input Parameter of date type sy-datum.This particular program is scheduled as an Background Job.
    Now when i execute the program  in background  the existing variant date must be overwritten with any new values . So please provide an solution for this.
    Thanks
    K.Nadesh Kumar

    hi nadesh,
    enter date on your selection screen , then save variant.
    tick the selection variable check box i.e L.
    now click on pushbutton SELETION VARIABLE.
    Then select type D and select the criteria current date or whatver of your choice.
    if you are not clear then search for the thread "daily background job". I think you will get the answer from there.
    Regards
    Abhinesh

  • Call or Execute, ABAP program with variant

    REPORT Z_call_ABAP_program  NO STANDARD PAGE HEADING.
    TABLES : BKPF , INDX.
    PARAMETERS : ZBUKRS LIKE BKPF-BUKRS OBLIGATORY DEFAULT '0001',
                                 ZGJAHR LIKE BKPF-GJAHR OBLIGATORY DEFAULT '1995'.
    SELECT-OPTIONS : ZPERIOD FOR BKPF-MONAT OBLIGATORY.
    DATA : BEGIN OF CHECK_TAB OCCURS 100,
                     CLIENT LIKE BSEG-MANDT ,
                     COMPANY LIKE BKPF-BUKRS ,
                     FINYR LIKE BKPF-GJAHR ,
                     MONAT LIKE BKPF-MONAT ,
                     LDDT LIKE BKPF-CPUDT ,
                 END OF CHECK_TAB.
    DATA : BEGIN OF CHECK_TABO OCCURS 100,
                      CLIENT LIKE BSEG-MANDT ,
                      COMPANY LIKE BKPF-BUKRS ,
                      FINYR LIKE BKPF-GJAHR ,
                      MONAT LIKE BKPF-MONAT ,
                      LDDT LIKE BKPF-CPUDT ,
                  END OF CHECK_TABO.
    DATA : BEGIN OF CT_KEY ,
                      CLIENT LIKE BSEG-MANDT ,
                      COMPANY LIKE BKPF-BUKRS ,
                      FINYR LIKE BKPF-GJAHR ,
                      MONAT LIKE BKPF-MONAT ,
                      LDDT LIKE BKPF-CPUDT ,
                   END OF CT_KEY.
    START-OF-SELECTION.
    IMPORT CHECK_TAB FROM DATABASE INDX(VP) ID 'CDSDATE'.
    LOOP AT CHECK_TAB.
          MOVE-CORRESPONDING CHECK_TAB TO CHECK_TABO. APPEND CHECK_TABO.
    ENDLOOP.
    LOOP AT CHECK_TAB.
         IF CHECK_TAB-FINYR = ZGJAHR AND CHECK_TAB-MONAT IN ZPERIOD AND
              CHECK_TAB-COMPANY = ZBUKRS.
              CLEAR CT_KEY.
               MOVE: CHECK_TAB-CLIENT TO CT_KEY-CLIENT ,
               CHECK_TAB-COMPANY TO CT_KEY-COMPANY,
               CHECK_TAB-FINYR TO CT_KEY-FINYR ,
                CHECK_TAB-MONAT TO CT_KEY-MONAT ,
                CHECK_TAB-LDDT TO CT_KEY-LDDT.
                EXPORT : CHECK_TAB CT_KEY TO MEMORY.
                SUBMIT ZCDSDTUP
                          WITH YCLIENT = SY-MANDT
                          WITH YCOMPANY = ZBUKRS
                          WITH YFINYR = ZGJAHR
                          WITH YMONAT = CHECK_TAB-MONAT
                          WITH YLDDT = CHECK_TAB-LDDT
                          VIA SELECTION-SCREEN AND RETURN.
                   IMPORT CHECK_TAB FROM MEMORY .
            ENDIF.
    ENDLOOP. 
    SKIP 2.
    WRITE :/2 'Position Before Update'. ULINE /2(53).
    WRITE :/4 'Client' , 11 'Comp.' , 18 'Fin.Yr.' , 27 'Period' ,
    35 'Data Downloaded upto'. SKIP 1.
    LOOP AT CHECK_TABO.
         IF CHECK_TABO-FINYR = ZGJAHR AND CHECK_TABO-MONAT IN ZPERIOD AND
             CHECK_TABO-COMPANY = ZBUKRS.
             WRITE :/5 CHECK_TABO-CLIENT,11 CHECK_TABO-COMPANY,19 CHECK_TABO-FINYR,
                          29 CHECK_TABO-MONAT, 38 CHECK_TABO-LDDT.
          ENDIF.
    ENDLOOP.
    SKIP 3.
    WRITE :/2 'Position After Update'. ULINE /2(53).
    WRITE :/4 'Client' , 11 'Comp.' , 18 'Fin.Yr.' , 27 'Period' , 35 'Data Downloaded upto'. SKIP 1.
    LOOP AT CHECK_TAB.
         IF CHECK_TAB-FINYR = ZGJAHR AND CHECK_TAB-MONAT IN ZPERIOD AND
              CHECK_TAB-COMPANY = ZBUKRS.
              WRITE :/5 CHECK_TAB-CLIENT ,11 CHECK_TAB-COMPANY , 19 CHECK_TAB-FINYR,
                           29 CHECK_TAB-MONAT , 38 CHECK_TAB-LDDT.
         ENDIF.
    ENDLOOP.
    SKIP 3. ULINE.
    WRITE :/7 'PLEASE CONFIRM CAREFULLY THE ABOVE DATES ' ,
                   /5 'BEFORE RUNNING THE DATA DOWNLOAD PROGRAM FOR CDS.'.
    EXPORT CHECK_TAB TO DATABASE INDX(VP) ID 'CDSDATE'.

    You will haev to add the varaint also in the object entry in the transport request.
    For this
    goto Se38 - > select progfram - > click on radio button for varaints - > Cick on Display - > Utilities -> transport request - >  and execute.
    This wil include the varaint also with the program name in the transport request and allow you to directly execute the program after transport to be executed with a varaint.
    Regards,
    Mansi.

  • Help! Report Transaction with Variant ??

    Hi there,
    another opportunity to increase your points.
    Problem :
    I have created a variant for the transaction mb51 (report). And now I wanted to create a 'Report Transaction' .. but I am not able to find my variant in the F4 help. Moreover if I personally type in the variant I get a message which says 'No <u>system variant</u> chosen for nonlocal object'...
    I have no clue where my variant is gone and what the System variant means... please help..
    regards,
    ZAM
    Message was edited by: ZAMUser

    Problem Solved .. I saved my variant with cus& prefix and got over ..
    regards,
    ZAM

  • Copying Queries from one infoset to the other with variants

    Hello Gurus,
    I have two infosets (A & B) based on logical database PNPCE. Infoset A & B are exactly the same. Now, I want to copy the queries of infoset A to infoset B.
    I am unable to copy the queries with variants. And I am getting following message:
    Error when copying query report XXXXXXX= with variants. Error when importing query
    FYI, I am able to copy the queries without variants successfully, using 'Sap Query: Special Copy Functions'.
    Any help on this would be much appreciated.
    Thanks,
    Ikram

    I think you are right. I see  now that I am overcomplicating things.
    To answer your question, no I do not add any color adjustments to the individual compound clips. I double click into the compound clips and make color adjustments to each of the angles from the multicam clip. When copying a clip made from the same multi cam clip from one project to another, any color adjustments made to the angles of that multicam clip that was copied over from the other project, does not carry over to the same multicam clips to the new project it was copied to - even if you break the compound clip apart to just the multicam clip, at least that's what I've noticed.
    But as you said, the easier thing to do, and this makes total sense now, would be create your multicam clip, and use keywords to label the parts in the browser, then drag the clips to the timeline as you need them. I'm assuming that the color corrections you apply to the angles on the timeline will be automatically applied to new keyword clips you drag to the timeline? Also, to name those multicam clips on the timelines, would you use markers? Is this correct?
    I really need to watch a few online tutorials on compound clips, but what Luis said has really cleared things up for me.
    Thanks so much for your help and patience guys!

  • Report RNOTIFUPDATE01 and Variant SAP&WORKPLACE

    Hi all,
    in Solution Manager I scheduled report RNOTIFUPDATE01 with variant SAP&WORKPLACE.
    Following the F1-help and also note 781163 using this variant the report should only replicate/create messages to/in Sol Man which have not been closed yet (status "Solution Confirmed" or "Confirmed Automatically") at Service Marketplace.
    Unfortunately using this variant I got many many old messages in Sol Man now. Messages which have SAP status "Solution Confirmed" and Sol Man user status "Sent to Support". Beside the fact the report did not work correctly (or I did misunderstand something) is there a quick way to get the messages to user status "Confirmed"?
    Report CRM_SOCM_SERVICE_REPORT is not working here.
    Thanks in advance.

    I found tables CRM_JCDS and CRM_JEST which contain the status i need to change (user status and system status in both tables).
    Does anyone know if there is a report to perform changes on these tables?

  • Problem WIth Variant in a report program

    I have a z report program with couple of variants , the problem is the varaints display onlt name of the variant and description when the varaint button is pressed.
    The changed by , date etc details are not getting displayed.
    Thanks
    Arun

    Hi Arun,
    You will not get those data directly from the program execution screen. If you want to get those details, please check table VARID for that variant or program.
    Regards,
    Sourav

  • Creating a report transaction(SE93) and Start with variant

    I have a report that I am creating a transaction using SE93 with in our development client.  I also have a variant associated with this report.
    When I am on SE93, I entered the program name, selection screen = 1000, and choose the dropdown list for "Start with variant", nothng appears.  My variant does not appear in the dropdown.  Why is that? 
    I also tried creating a transport for the variant, thinking that this was the problem, but that didn't help either.
    What am I missing here?
    Thanks for your help.

    Just type the variant name instead of F4. You may see some inconsistencies because the variant is created under local object.
    Edited:
    Right answer would be
    Go to se38 - Enter the program name - choose variants - Change - Enter variant name (choose attributes but not values) - go to UTILITIES (on application menu) - Transport request - Create a transport before you create a transaction.
    The reason: You cannot use local variant in transactions and the variants you have created in the program are local.
    Good luck
    Edited by: Sampath Kumar on Nov 16, 2009 11:04 AM
    Edited by: Sampath Kumar on Nov 16, 2009 11:07 AM

  • Error when executing report with large data selection in Infoview

    Hello,
    This is regarding Error we are facing in BO system.
    We have installed:
    Business Object Enterprise XI 3.1
    Crystal report 2008
    When we are trying to execute report in BO INFOVIEW on production  system, we are facing following error (After 10 mins of execution).
    ========================================================================================
    Windows Internet Explorer
    Stop running this script?
    As script on this page is causing Internet Explorere to tun slowly.
    If it continues to run, your computer might become
    unresponsive.
    ========================================================================================
    Please note: We are getting data via Crytal report. Only, execution in infoview is giving error.
    If we are executing same report with less data(E.g a days data) then we are getting output in Infoview.
    However, when we execute report with more data (6 months data) then we are getting attached error after 10 min of execution time.
    Helpfull reply will be awarded.
    Regards.
    Edited by: Nirav Shah on Dec 14, 2010 6:19 AM

    If it is indeed a server timeout issue, the following document might be usefull: http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/606e9338-bf3e-2b10-b7ab-ce76a7e34432
    It's about Troubleshooting Time-outs in BusinessObjects Enterprise XI, but  a lot is still applicable.
    Hope this helps...
    Martijn van Foeken
    Focuzz BI Services
    http://www.focuzz.nl
    http://nl.linkedin.com/in/martijnvanfoeken
    http://twitter.com/mfoeken

  • Transport of sap queries report with variants

    We created an ABAP Query report (it is system generated report). We created Z transactions to which we attached generated report. We added Z transaction, User group & infoset in transport & transported same to quality system.
    For some transactions report is transported for some it is not. why so?
    Also we created variants for these transactions & mentioned same while creating transaction. These variants are also not transported. I checked that these programs are generated by system as local obj. & when i tried to add variants in transport request using program RSTRANSP system gave me message that cant add variants for local objects.
    Can you please let us know how can we transport Transactions created by ABAP query report with variants?

    Hi
    To use the variants in the other systems, you have to create System Variants. While creating a variant provide the name of the variant starting with CUS& and include the same in request number.
    For transporting the Query, User group and Info set use the Query Transport tool program - RSAQR3TR
    ~~~Ganesh Kumar K.

  • WAD: Execute query with variant

    Hi,
    I would like to create a web report so that for a web item to select a query with variant. Is it possible using WAD?
    Or is there any parameter that could be used in the URL so that I can create directly the URL for this web report, without using WAD anymore?
    Could you please give me some sugestions regarding this problem?
    Thank you,
    Iuliana

    HI Iuliana,
    Take a look at this post:
    Re: Variant for a Web Report
    Hope this helps...

  • Reports with varying number of variables

    Hi all
    I am new to the Forum. I have already searched the db for answers to my question but was unsucessful so far.
    I want to create a report in html which I open in Excel for my colleagues to edit. One report contains a varying number of variables, such as years. I want to be able to order the records by the years in different blocks, i.e. blocks of projects which are carried out in 2006, 2007, etc. Is there a way of generating such a report with a dynamic number of years without using pl/sql?
    Thanks for any help!
    Cheers.

    do you mean you want to use plain sql and sqlplus?
    you can maybe try something like
    set feedb off head off
    break on year skip 1
    col year nopri
    select ename, hiredate, extract(year from hiredate) year from emp order by year;
    SMITH      17.12.80
    WARD       22.02.81
    JONES      02.04.81
    MARTIN     28.09.81
    BLAKE      01.05.81
    ALLEN      20.02.81
    CLARK      09.06.81
    FORD       03.12.81
    JAMES      03.12.81
    KING       17.11.81
    TURNER     08.09.81
    MILLER     23.01.82
    ADAMS      23.05.87
    SCOTT      19.04.87

  • How to save varaint in a report program with tabstrip in selection-screen

    Hi Gurus,
    We have a custom report program and selection screen of this program has a tabstrip of 9 tabs. This program will run in background job and we are facing problem to save variant for this report program. 
    We saved one variant with 'TAB2' populated. But when we execute the report and select that variant and we are not navigated to 'TAB2' automatically. So, code for TAB2 is not triggerd and we are not getting desired output.
    When we set this program with variant in Job, program is not navigated to 'TAB2' as per variant setup.
    Is there any way to save variant for this kind of report ?
    Please help with your suggestions
    Thanks & Regards
    Chandan

    Thanks for your help.
    I found during debugging that it is holding the sy-ucomm of the first tab as default value.  So, I declared a new field in selection screen with No-Display option. When user will select a tab, this new field will hold the value of that sy-ucomm. As this field is in selection screen, it is getting stored in variant also.
    In start-of-selection of program I am checking this field value and accordingly set the TABSTRIP.
    Thanks again for your help.....
    Regards,
    Chandan

  • Converting smartform into executable(report) program..........

    Hi Abapers,
                I had a requirement to convert the smartform 'zpurchase'(customized std. PO form /SMB80/MMPO_ES), into an executable(report) program..so tat the user can execute this program by giving the Po Number in the run time and get the required form print out....
              I had written a print program(zpo)  for this form, but after executing i got only the layout not the values .... So guide me how to pull the values from tcode ME23N.....
    REPORT  ZPO.
    tables: ekko,pekko,ekpo,ekpa,eket,ekkn,ekek,komk.
    *parameters: iv_druvo like druvo.
    parameters: iv_ekpo like ekpo-ebeln.
    data : fm_name type rs38l_fnam.
    data: it_ekpo like standard table of ekpo,
          it_ekpa like standard table of ekpa,
          it_pekpo like standard table of pekpo,
          it_eket like standard table of eket,
          it_tkomv like standard table of komv,
          it_ekkn like standard table of ekkn,
          it_ekek like standard table of ekek,
          it_komk like standard table of komk.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        FORMNAME                 = 'ZPURCHASE'
    *   VARIANT                  = ' '
    *   DIRECT_CALL              = ' '
    IMPORTING
        FM_NAME                  = fm_name
    * EXCEPTIONS
    *   NO_FORM                  = 1
    *   NO_FUNCTION_MODULE       = 2
    *   OTHERS                   = 3
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

    Code as follows..........
    CALL FUNCTION fm_name
      EXPORTING
    *   ARCHIVE_INDEX              =
    *   ARCHIVE_INDEX_TAB          =
    *   ARCHIVE_PARAMETERS         =
    *   CONTROL_PARAMETERS         =
    *   MAIL_APPL_OBJ              =
    *   MAIL_RECIPIENT             =
    *   MAIL_SENDER                =
    *   OUTPUT_OPTIONS             =
    *   USER_SETTINGS              = 'X'
        IS_EKKO                    = ekko
        IS_PEKKO                   = pekko
    *   IS_NAST                    =
    *   IV_FROM_MEM                =
    *    IV_DRUVO                   = druvo
    * IMPORTING
    *   DOCUMENT_OUTPUT_INFO       =
    *   JOB_OUTPUT_INFO            =
    *   JOB_OUTPUT_OPTIONS         =
      TABLES
        IT_EKPO                    = it_ekpo
        IT_EKPA                    = it_ekpa
        IT_PEKPO                   = it_pekpo
        IT_EKET                    = it_eket
        IT_TKOMV                   = it_tkomv
        IT_EKKN                    = it_ekkn
        IT_EKEK                    = it_ekek
        IT_KOMK                    = it_komk
    * EXCEPTIONS
    *   FORMATTING_ERROR           = 1
    *   INTERNAL_ERROR             = 2
    *   SEND_ERROR                 = 3
    *   USER_CANCELED              = 4
    *   OTHERS                     = 5
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • Problem to spool when Executing reports in background

    Hi experts,
    I  executed  reports in backgroud , but when i checked in SM37 the generated spool not given proper layout format.
    This problem occurs when report having more columns.
    plz help me earliest.
    Regards,
    jyotsna

    Hi jyotsna,
    this happens with ALV output because the output format is determined at runtime.
    You can control the print format used: Just fromyour reports list in online mode, choose PRINT. A Popup should come up letting you specify the printer, number of copies, pages to be printed and so on.
    At the bottom of the popup you have the Properties button. This button opens the overview sceen for all the available print parameters. Double-Click the Format section, choose a format you want to use.The the Specifications button takes you to another screen. Here you can choose 'Valid for this report only' and Check the Background checkbox.The push the 'Copy settings' button. Then Enter to close all the popups. This should help. Additionally you can set a default layout variant for your list to be used.
    For this, in the ALV list, use Menu Settings-Layout-Layout Management. Here yu can set a default variant.
    Regards,
    Clemens

Maybe you are looking for

  • Error while creating activity by using BAPI

    Hi, While creating activity by using BAPI Im getting error as follows, Start processing of refference object handle generated. Integrity rule a d0008 broken business partner with function from vbkakom not vbpakom Integrity rule a d0008 broken edit al

  • Deleting files from hard drive

    How can I delete files without Finder asking for my digital ID? This is annoying

  • Lable colors & thumbnail images

    I like to use label colors to quickly see what kind of footage is in my timeline (ie: interview vs. broll vs. a scene) but I'm getting annoyed by the color cast being also applied to thumbnails in the browser and in the timeline if I choose to displa

  • How Do I get the right patches from my keyboard into LOgic??

    Please help me. I'm a beginner of Logic. Can someone tell me how to record the sound that I want to record into the MIDI track?? When I click on the first track with the grand piano picture, and then play my keyboard, I dont hear grand piano but stri

  • A  tracking program

    I need some help please. I want to develop an application that can track somebody's movement with the help of a mobile phone that is possessed by the person being tracked. I should be able to see an icon moving on a map as the person moves from place