Executing an oracle stored procedure in xMII 11.5

Dear all,
      I am facing problem executing an oracle stored procedure using sql query in MII. The SP does not have any input or output parameters & consists of only 2 insert statements. I tried to use Command Mode, FixedQuery & FixedQuery With output mode, but the SP doesn't run.
This is the error i get when i use :
execute InsertTest or exec InsertTest -  A SQL Error has occurred on query, ORA-00900: invalid SQL statement
I read in one of the posts to use 'CALL' instead of 'exec' or 'execute'. Even with this i get error which states:
A SQL Error has occurred on query, ORA-06576: not a valid function or procedure name
The syntax i used is CALL InsertTest  -  'InsertTest' is the SP name.
I also checked Sam's comment in one of the posts about jdbc driver. We are using oracle 9i, so i guess there is no problem with the version of DB.
The stored procedure is working fine in SQL Developer, How else can i invoke the SP in MII?
Any help would be greatly appreciated.
Thanks,
Sushma.

Hi all,
for insert create procedure
CREATE PROCEDURE MII_TEST_INSUPD
(ID_IN IN NUMBER,
NAME_IN IN VARCHAR2)
IS
BEGIN
  -- UPDATE ROW
  UPDATE TEST SET
          NAME = NAME_IN
  WHERE
          ID = ID_IN;
  -- NOT RETURN INSERT NEW LINE IN TABLE
  IF SQL%ROWCOUNT = 0 THEN
     INSERT INTO TEST (ID, NAME) VALUES (ID_IN, NAME_IN);                        
  END IF; 
END;
In MII you create a query template
Mode - Command
FixedQuery - insert the code below
CALL MII_TEST_INSUPD ([Param.1],'[Param.2]')
for returns the grid using procedures in oracle you need create a package on oracle server
CREATE PACKAGE PKG_test IS
  TYPE cursortype is ref cursor;
  PROCEDURE test (mycursor in out cursortype);
END PKG_test;
CREATE PACKAGE BODY PKG_test IS
  PROCEDURE test (mycursor in out cursortype) AS
  BEGIN
     open mycursor for select * from test;
  END;
END PKG_test;
In MII you create a query template
Mode -  FixedQueryWithOutput
FixedQuery - insert the code below
CALL PKG_TEST.TEST(?)
Danilo

Similar Messages

  • Calling Oracle stored procedure from xMII Query Templates.

    Hi All,
    We have a requirement to call a Oracle stored procedure from xMII, the SP expects some inputs and then it returns multiple rows.
    I tried different approches with no results, I remember some posts on the same topic but I could not get in search results.
    Looking for some help in this regards
    Rupesh.

    Hi Rupesh Bajaj,
    In oracle stored procedure we have to use Packages..if you used packages the u have to assign to some variable.
    To calling Stored procedure  in Query Template is CALL Testing('[Param.1]','[Param.2]',,:X)
    In above line Testing is Stored procedure name and Param.1 is parameters and X is Package.
    Thanks
    Ravilla Ramesh

  • SOS..How to execute an Oracle Stored procedure

    Please help me.
    I need to execute an oracle stored procedure from a JSP.
    I'M using Jakarta Tomcat and I dont have the Oracle Jbo tags and no BC4j tags.
    Anyone have an example using standar tags or directives???.
    This an emergency call..!!!!!!

    To execute a stored procedure (Oracle or other), you must create a CallableStatement.
    Here is the link to the API description:
    http://java.sun.com/products/jdk/1.2/docs/api/java/sql/CallableStatement.html
    You use it like a query but the the syntax is:
    {call <procedure-name>[<arg1>,<arg2>, ...]}

  • Executing an Oracle Stored Procedure from Sender JDBC adapter

    I could really use some help from someone who had done this before. 
    I've read the help about using the JDBC sender adapter, but it's not helping enough.
    I found this line: "Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
    The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs."
    That's definately what we want to do, but we can't figure out the syntax.
    The procedure in oracle looks like this:
    CREATE OR REPLACE PROCEDURE test_ref_cursor
    ( cur_generic IN OUT result_sets.cur_generic)
    as
    BEGIN
    Open cur_generic for
    select
       proposal_number,
       to_char(sequence_number),
       column_name,
       column_value,
       update_timestamp,
       update_user
       from
       coeus.sap_test;
    END test_ref_cursor;
    And we have tried every kind of statement we can think of, but the file adapter always gives us an "invalid sql statement" error.
    Does anyone know what syntax we need to put in the "Query SQL Statement" in the JDBC sender adapter in order to call this procedure?  Or is there something wrong with the procedure that is causing the error?
    <i>I will absolutely return and give points, but PLEASE read my whole post before answering and do not just link me to or quote the help for configuring a sender JDBC adapter or blogs that are about the JDBC adapter in general but do not deal with the issues I am having. Thank you.</i>

    Hi Vanda,
    Unfortunately, the sender JDBC adapter does not support Oracle's store procedure/function.  Unlike stored procedures from other database vendors, Oracle returns a cursor, not a resultset.  The sender JDBC adapter must send a resultset to XI.
    There are 2 possible ways you can accomplish this:
    1.  Use BPM and call the Oracle stored procedure using a receiver adapter via a asynch-synch bridge.
    2.  Develop a user-module for the adapter, which can be used with a sender adapter.
    Thanks
    Prasad

  • How to execute an Oracle stored procedure which returns many records?

    I have two synchronous scenarios XI<->PI<->JDBC, where JDBC is receiver adapter.
    Each scenario runs a different stored procedure in Oracle database.
    The first stored procedure returns only one record, the second stored procedure returns many records, which come from a cursor.
    In the first scenario I executed the stored procedure following the directions of Help SAP page and works perfectly.
    Link: [http://help.sap.com/saphelp_nw70/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm]
    <root>
      <StatementName5>
        <storedProcedureName action=u201DEXECUTEu201D>
          <table>realStoredProcedureName</table>
          <param1 [isInput=u201Dtrueu201D] [isOutput=true] type=SQLDatatype>val1</param1>
        </storedProcedureName>
      </StatementName5>
    <root>
    I have sought in the forums of SDN and cannot find the way to run the second stored procedure, and receive the information it returns.
    Thank you for your help.
    Rafael Rojas.

    Think It doesnt matter either cursor or result set. Try to get the response back from JDBC and see what are the fields it exactly populating.
    In Procedure you can able to find the columns selecting in Cursors. Give those columns in the DT.
    File - JDBC (Execute-- Procedure)
    To get the response
    JDBC_respose -  File
    Correct me if im wrong.
    Regards
    Ramg

  • Execute Oracle Stored Procedure from Excel

    Is it possible to execute an Oracle Stored Procedure from Microsoft Excel and return the result of the Oracle Store Procedure into the excel spreadsheet.

    Yes. You can use Oracle Objects for OLE to accomplish this. It comes with Excel examples and an online help file with many more examples.

  • JDBC Sender adapter - Oracle - Stored Procedure - Error

    Hello,
    Need few clarifications on JDBC sender adapter and stored procedures when connecting to Oracle DB.
    My scenario is, Oracle to SAPBW. So in sender JDBC adapter, we have used a SP having multiple SQL statements it, esp. one of the SELECT statment having Joins on a table and View.
    My questions are,
    1) Is it possible to have more SQL statements in SP for Sender JDBC?
    2) Is the SP of Oracle DB returns resultset or cursor?
    I have tried in searching the forum perticularly for connecting to Oracle as Sender and below like said  that there is a limitation of XI JDBC when connecting to Oracle.
    Executing an Oracle Stored Procedure from Sender JDBC adapter
    So please clarify the doubts and help me.
    With regards,
    Jilan

    Hi Jilan,
    Unlike what was mentioned in the link given by you that oracle returns cursor and not resultset is not completely true. It may be difficult but certainly not impossible.
    Refer : http://www.enterprisedt.com/publications/oracle/result_set.html
    regards
    joel

  • Execute oracle stored procedure from C# always returns null

    Hi,
    I'm trying to execute a stored procedure on oracle 9i. I'm using .Net OracleClient provider.
    Apparently, I can execute the stored procedure, but it always returns null as a result (actually all the sp's I have there returns null)! I can execute any text statement against the database successfully, and also I can execute the stored procedure using Toad.
    This is not the first time for me to call an oracle stored procedure, but this really is giving me a hard time! Can anyone help please?
    Below are the SP, and the code used from .Net to call it, if that can help.
    Oracle SP:
    CREATE OR REPLACE PROCEDURE APIECARE.CHECK_EXISTENCE(l_number IN NUMBER) AS
    v_status VARCHAR2(5) := NULL;
    BEGIN
    BEGIN
    SELECT CHECK_NO_EXISTENCE(to_char(l_number))
    INTO v_status
    FROM DUAL;
    EXCEPTION WHEN OTHERS THEN
    v_status := NULL;
    END;
    DBMS_OUTPUT.PUT_LINE(v_status);
    END CHECK_CONTRNO_EXISTENCE;
    C# Code:
    string connStr = "Data Source=datasource;Persist Security Info=True;User ID=user;Password=pass;Unicode=True";
    OracleConnection conn = new OracleConnection(connStr);
    OracleParameter param1 = new OracleParameter();
    param1.ParameterName = "v_status";
    param1.OracleType = OracleType.VarChar;
    param1.Size = 5;
    param1.Direction = ParameterDirection.Input;
    OracleParameter param2 = new OracleParameter();
    param2.ParameterName = "l_number";
    param2.OracleType = OracleType.Number;
    param2.Direction = ParameterDirection.Input;
    param2.Value = 006550249;
    OracleParameter[] oraParams = new OracleParameter[] { param1, param2 };
    OracleCommand cmd = new OracleCommand("CHECK_EXISTENCE", conn);
    cmd.CommandType = CommandType.StoredProcedure;
    cmd.Parameters.AddRange(oraParams);
    conn.Open();
    object result = cmd.ExecuteScalar();
    conn.Close();

    Hi,
    Does that actually execute? You're passing two parameters to a procedure that only takews 1 and get no error?
    Your stored procedure doesnt return anything and has no output parameters, what are you expecting to be returned exactly?
    If you're trying to access V_STATUS you'll need to declare that as either an output parameter of the procedure, or return value of the function, and also access it via accessing Param.Value, not as the result of ExecuteScalar.
    See if this helps.
    Cheers,
    Greg
    create or replace function myfunc(myinvar in varchar2, myoutvar out varchar2) return varchar2
    is
    retval varchar2(50);
    begin
    myoutvar := myinvar;
    retval := 'the return value';
    return retval;
    end;
    using System;
    using System.Data;
    using Oracle.DataAccess.Client;
    public class odpfuncparams
         public static void Main()
          OracleConnection con = new OracleConnection("user id=scott;password=tiger;data source=orcl");
          con.Open();
          OracleCommand cmd = new OracleCommand("myfunc", con);
          cmd.CommandType = CommandType.StoredProcedure;
          OracleParameter retval = new OracleParameter("retval",OracleDbType.Varchar2,50);
          retval.Direction = ParameterDirection.ReturnValue;
          cmd.Parameters.Add(retval);
          OracleParameter inval = new OracleParameter("inval",OracleDbType.Varchar2);
          inval.Direction = ParameterDirection.Input; 
          inval.Value="hello world";
          cmd.Parameters.Add(inval);
          OracleParameter outval = new OracleParameter("outval",OracleDbType.Varchar2,50);
          outval.Direction = ParameterDirection.Output;
          cmd.Parameters.Add(outval);
          cmd.ExecuteNonQuery();
          Console.WriteLine("return value is {0}, out value is {1}",retval.Value,outval.Value);
          con.Close();
    }

  • Can sqltaglib.tld execute Oracle stored procedure?

    Is it possible to execute Oracle stored procedure through Oralce's own sqltaglib.tld. The sqltaglib on-line manual only shows how to run SQL query/insert/update statement.
    Thanks,

    I went to a few forums and asked the same question. The boys down at Oracle Community Forums shed some light on this subject and, with their help, I was able to figure it out. Here is the thread for those who want to read: [My Thread @ Oracle Community Forums|http://forums.oracle.com/forums/thread.jspa?messageID=2721348?].
    THE SOLUTION
    cs = con.prepareCall("{ call get_countries(?) }");
    cs.registerOutParameter(1, OracleTypes.CURSOR);
    cs.execute();
    ResultSet rs = ((OracleCallableStatement) cs).getCursor(1);

  • How to execute oracle stored procedure through php as externally?

    hi...
    i am searching for the way that how to execute oracle stored procedure through web service, i am using php and mysql, i have some stored procedures in oracale database, i want to execute them, from php, means the database will be remain mysql, and the stored procedures of oracle will be executed externally...
    Kind regards,
    Wilayat.

    Ok, so first of all this is a kind of strange question. Since Oracle and MYSQL can happily live side by side.
    Make sure you have the oracle client (instant or regular ) installed and OCI_8 is set up and working correctly in PHP. If it is, when you run the phpinfo() routine you will see oci_8 on there. IF PHP connects just fine from the command line yet apache wont connect check permissions and things like the LD_Library Path.
    Then in php, right along with your MySQL statements run Oracle Statements eg:
    <?php
    $OraDB = oci_connect(name,pass,tnsname);
    $MySQLdb = mysql_connect([parms]);
    $oraQueryText = "begin sp_some_proc([some parms]); end;" ;
    $mysqlQuery = " Some mysql Query";
    $oraQuery = oci_parse($OraDB,$oraQueryText );
    oci_execute($oraQuery);
    mysql_execute([parms]);
    ?>
    Use the standard fetch code to get data from either of them.
    If you cannot and I mean absolutely cannot get an admin to link in OCI_8 then you still have recourse although it will be tedious as hell. PHP allows you to exec calls to the OS. You still MUST make sure the Oracle Client is installed and that sqlplus runs from the command line. You will more then likely have to have a shell script written to do this as well, but maybe not as I have never tried it with the exception of capturing the return value of sqlplus and you will have to dig into sqlplus to get it to send its results to a file you can then parse with php.
    Good Luck!

  • BO v5.1 - creating a report from an oracle stored procedure

    Post Author: newrochelle
    CA Forum: Publishing
    hi to all,
    im using BO 5.1 and i need to create a document from an oracle stored procedure that have only one IN parameter and ten OUT parameters.
    Creating the new report I selected the database connection then I choose the stored procedure name from the list, I inserted the value for the IN parameter and finally I click on Run button.
    I got the following error message:
    ORA-06550: line 1, column 38: :PLS-00103: Encountered the symbol
    "," when expecting one of the following: : : ( - + case mod
    new not null others <an identifier> : <a double-quoted
    delimited-identifier> <a bind variable> avg : count current
    exists max min prior sql stddev sum variance : execute forall
    merge time timestamp interval date : <a string literal with
    character set specification> : <a number> <a single-quoted SQL
    string> pipe : <an alternatively-quoted string literal with
    character set specification> : <an alternatively-q :-6550
    it seems to be caused by the OUT parameters!
    i leaved them without any value.
    it's the first time that I used a stored procedure to create a BO report, but I think the OUT parameters are needed to do that, otherwise what data will be presented in the report???
    can you help me?
    please answear me ASAP.
    Thank's in advance
    Regards
    Andrea

    Post Author: synapsevampire
    CA Forum: Publishing
    Try posting in a BO forum, this is Crystal Reports.
    -k

  • Not able to retrive the recordset from oracle stored procedure in VC++

    Hi,
    I am trying to retrieve the records from the reference cursor which is an out parameter for an oracle 9i store procedure in VC++ application. But it is giving the record count as -1 always. Meanwhile i am able to get the required output in VB application from the same oracle 9i store procedure .
    Find the code below which i used.
    Thanks,
    Shenba
    //// Oracle Stored Procedure
    <PRE lang=sql>CREATE OR REPLACE
    PROCEDURE GetEmpRS1 (p_recordset1 OUT SYS_REFCURSOR,
    p_recordset2 OUT SYS_REFCURSOR,
    PARAM IN STRING) AS
    BEGIN
    OPEN p_recordset1 FOR
    SELECT RET1
    FROM MYTABLE
    WHERE LOOKUPVALUE > PARAM;
    OPEN p_recordset2 FOR
    SELECT RET2
    FROM MYTABLE
    WHERE LOOKUPVALUE >= PARAM;
    END GetEmpRS1;</PRE>
    ///// VC++ code
    <PRE lang=c++ id=pre1 style="MARGIN-TOP: 0px">ConnectionPtr mpConn;
    _RecordsetPtr pRecordset;
    _CommandPtr pCommand;
    _ParameterPtr pParam1;
    //We will use pParam1 for the sole input parameter.
    //NOTE: We must not append (hence need not create)
    //the REF CURSOR parameters. If your stored proc has
    //normal OUT parameters that are not REF CURSORS, you need
    //to create and append them too. But not the REF CURSOR ones!
    //Hardcoding the value of i/p paramter in this example...
    variantt vt;
    vt.SetString("2");
    m_pConn.CreateInstance (__uuidof (Connection));
    pCommand.CreateInstance (__uuidof (Command));
    //NOTE the "PLSQLRSet=1" part in
    //the connection string. You can either
    //do that or can set the property separately using
    //pCommand->Properties->GetItem("PLSQLRSet")->Value = true;
    //But beware if you are not working with ORACLE, trying to GetItem()
    //a property that does not exist
    //will throw the adErrItemNotFound exception.
    m_pConn->Open (
    bstrt ("Provider=OraOLEDB.Oracle;PLSQLRSet=1;Data Source=XXX"),
    bstrt ("CP"), bstrt ("CP"), adModeUnknown);
    pCommand->ActiveConnection = m_pConn;
    pParam1 = pCommand->CreateParameter( bstrt ("pParam1"),
    adSmallInt,adParamInput, sizeof(int),( VARIANT ) vt);
    pCommand->Parameters->Append(pParam1);
    pRecordset.CreateInstance (__uuidof (Recordset));
    //NOTE: We need to specify the stored procedure name as COMMANDTEXT
    //with proper ODBC escape sequence.
    //If we assign COMMANDTYPE to adCmdStoredProc and COMMANDTEXT
    //to stored procedure name, it will not work in this case.
    //NOTE that in the escape sequence, the number '?'-s correspond to the
    //number of parameters that are NOT REF CURSORS.
    pCommand->CommandText = "{CALL GetEmpRS1(?)}";
    //NOTE the options set for Execute. It did not work with most other
    //combinations. Note that we are using a _RecordsetPtr object
    //to trap the return value of Execute call. That single _RecordsetPtr
    //object will contain ALL the REF CURSOR outputs as adjacent recordsets.
    pRecordset = pCommand->Execute(NULL, NULL,
    adCmdStoredProc | adCmdUnspecified );
    //After this, traverse the pRecordset object to retrieve all
    //the adjacent recordsets. They will be in the order of the
    //REF CURSOR parameters of the stored procedure. In this example,
    //there will be 2 recordsets, as there were 2 REF CURSOR OUT params.
    while( pRecordset !=NULL ) )
    while( !pRecordset->GetadoEOF() )
    //traverse through all the records of current recordset...
    long lngRec = 0;
    pRecordset = pRecordset->NextRecordset((VARIANT *)lngRec);
    //Error handling and cleanup code (like closing recordset/ connection)
    //etc are not shown here.</PRE>

    It can be linked to internal conversion. In some case, the value of internal or extranal value is not the same.
    When you run SE16 (or transaction N), you have in option mode the possibility to use the exit conversion or not.
    Christophe

  • Calling unix shell script from oracle stored procedure.. urgent!!!!!!!!!!!!

    Hi,
    i havea requirement where in i should be able to call my shell script through oracle stored procedure.i tried the following way..but iam unable to get the result.please find the details below.
    new.sh - my shell script - lctfile (LCTFILE) is the input pa
    v_config_file=`find $FND_TOP -name LCTFILE
    FNDLOAD apps/s0ccer@$dxbs1 0 Y DOWNLOAD $v_config_file /home/bir4163/RPT33/bin/menu.ldt MENU MENU_NAME='AR_NAVIGATE_GUI'
    if [ $? != 0 ];then
    echo "$DATE $0 FNDLOAD DOWNLOAD Failed!" | tee -a $LOG_FILE
    else
    echo "SUCCESS" | tee -a $LOG_FILE
    fi
    CREATE OR REPLACE PROCEDURE test_dbms_scheduler
    AS
    v_text VARCHAR2 (255) := 'AR_NAVIGATE_GUI';
    BEGIN
    DBMS_OUTPUT.put_line ('I am in Procedure');
    DBMS_SCHEDULER.create_job (
    job_name => 'test_dbms_scheduler',
    job_action => '/home/bir4163/RPT33/bin/new.sh',
    number_of_arguments => 1,
    job_type => 'executable',
    start_date => SYSDATE,
    repeat_interval => 'FREQ=SECONDLY; INTERVAL=1',
    enabled => FALSE,
    auto_drop => FALSE,
    comments => 'run shell script'
    DBMS_SCHEDULER.set_job_argument_value (job_name => 'test_dbms_scheduler',
    argument_position => 1,
    argument_value => v_text);
    DBMS_SCHEDULER.enable ('test_dbms_scheduler');
    DBMS_OUTPUT.put_line ('I am back in Procedure');
    EXCEPTION
    WHEN OTHERS
    THEN
    DBMS_OUTPUT.put_line (SQLCODE || SQLERRM);
    END;
    But iam unable to test it as i do not have permissions to access dbms_scheduler.can anybody tell me how to solve this using DBMS_PIPE with a sample code.
    please do help its very urgent
    thanks
    ramya

    Hi,
    Register your Shell Script as a concurrent program, Executable execution method "Host", then use fnd_request.submit_request to submit the program.
    Regards,
    Andries

  • Calling a Oracle stored procedure in orchestrator

    I am trying to execute a stored procedure using the query database IP in orchestrator.  I can select data from the oracle db so i know the prereqs are setup correctly but it fails on executing the stored procedure.
    The syntaxe is execute SPNAME('PARAM!','PARAM2')
    The error is 
    Failed, Oracle failure Database error has occurred. ORA-00900: invalid SQL statement
    Oracle query failure, please verify your query syntax is correct.  Verify correct table names and column names etc...
    The SP works fine in sql developer so im pretty sure the syntax is correct unless the Query Database IP needs a different syntax to work.  

    simple as that.  i actually tried something similar since that is how SCOM executes SP but left the execute command in there so it failed and i moved on.  thanks for the reply.  
    Just for reference i went the powershell route and that worked as well but much more complicated then your solution.  for anyone that wants to know the script is 
    $asm = [System.Reflection.Assembly]::LoadWithPartialName("System.Data.OracleClient") 
    $connectionString = "Data Source=TNSNAME;uid=USERID;pwd=PASSWORD";
    $inputString1 = "PARAMETER INPUT 1";
    $inputString2 = "PARAMETER INPUT 2"
    $oracleConnection = new-object System.Data.OracleClient.OracleConnection($connectionString);
    $cmd = new-object System.Data.OracleClient.OracleCommand;
    $cmd.Connection = $oracleConnection;
    $cmd.CommandText = "SP NAME";
    $cmd.CommandType = [System.Data.CommandType]::StoredProcedure;
    $cmd.Parameters.Add("NAME OF EXPECTED PARAMETER 1", [System.Data.OracleClient.OracleType]::NUMBER) | out-null;
    $cmd.Parameters["NAME OF EXPECTED PARAMETER 1"].Direction = [System.Data.ParameterDirection]::Input;
    $cmd.Parameters["NAME OF EXPECTED PARAMETER 1"].Value = $inputString1;
    $cmd.Parameters.Add("NAME OF EXPECTED PARAMETER 2", [System.Data.OracleClient.OracleType]::VARCHAR2) | out-null;
    $cmd.Parameters["NAME OF EXPECTED PARAMETER 2"].Direction = [System.Data.ParameterDirection]::Input;
    $cmd.Parameters["NAME OF EXPECTED PARAMETER 2"].Value = $inputString2;
    $oracleConnection.Open();
    $cmd.ExecuteNonQuery() | out-null;
    $oracleConnection.Close();
    got help from http://dovetailsoftware.com/clarify/gsherman/2012/05/15/calling-oracle-stored-procedures-using-powershell/

  • Invoking ORACLE Stored Procedure

    Hello guys,
    I have an ORACLE stored procedure which I need to invoke. I'm currently unable to invoke the stored procedure since I'm always getting the same error:
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'test.set_pickup' (structure 'STATEMENTNAME'): java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'SET_PICKUP' ORA-06550: line 1, column 7: PL/SQL: Statement
    I've faced several projects where we needed to invoke stored procedures but these were located in a DB2 or Microsoft SQL Server, and these problems never occured.
    The procedure is set to the minimum, and is now only with one input parameter. I had an input and output parameter but for narrowing the problem I've removed the output.
    The structure for the stored procedure is the one that is referred by SAP or mentioned thousand of times in this forum:
    Statement_name
    StoredProcedureName (attribute ACTION)
      TABLE
      P_TRANSACTION_ID (Attributes isInput, isOutput, type)
    For the basics I'm only filling with one statement.
    I've read some threads with a similar problem but with no response, or solved but with no suggestion on how they solved it.
    Could you please help out?
    Kind regards,
    Gonçalo Mouro Vaz

    Hi,
    Is the structure in Oracle side is of the following format?
    <StatementName>
    <storedProcedureName action=u201D EXECUTEu201D>
        <table>realStoredProcedureeName</table>
    <param1 [isInput=u201Dtrueu201D] [isOutput=true] type=SQLDatatype>val1</param1>
    </storedProcedureName >
      </StatementName>
    Can you paste the structure here?
    Regards
    Suraj

Maybe you are looking for

  • Cannot copy IGMT: the parameter is incorrect

    ok so heres my problem i have had to recently wipe my whole laptop due to a hefty virus and in doing this i lost all my itunes library but once the restoration of my laptop was complete i proceeded to install i-tunes and use the method where you: ope

  • ITunes problems with existing Music Library

    Can someone please advise why since downloading the latest iTunes SW I now have 83 songs (at least two of these songs were purchased directly from the Apple on-line store) in my PC Music Library that cannot be ported to my iPOD. I have tried to Autho

  • MacBook Air (2012 release) not working with projectors

    I recently bought four MacBook Airs (all the new 2012 release) and I can not get any of them to work with an LCD projector. I have tried generic and authetic mini display adapters and have tried a few different projectors.  All I am able to see when

  • Inkscape won't open

    I bought a MAC for the first time a little over a year ago. I really haven't used a lot of the apps that came with it....big mistake. I need to use the inkscape but I can't get it to open. I tried to delete it and reload from a website(sourceforge.ne

  • Getting ITunes to organize files that were previously ripped.

    Greetings Itunes Gurus, I am new to IPods and ITunes. I have several Gigs of audio that I have ripped and used on my previous mp3 player. I now have an IPod. I am wondering how I can have those files copied to my IPod just as they are in the same dir