Cannot copy IGMT: the parameter is incorrect
ok so heres my problem
i have had to recently wipe my whole laptop due to a hefty virus and in doing this i lost all my itunes library but once the restoration of my laptop was complete i proceeded to install i-tunes and use the method where you:
open itunes preferences
go into my computer and copy the music to a destination and then import the folder into itunes to have my collection back
but for some reason half way through copying and pasting it get the error message "cannot copy IGMT: the parameter is incorrect"
and only copies half my collection does anyone know the solution to this problem or a way around it?
much appreciated and thnx in adavnce to any help!
Sounds like that IGMT file is corrupt.
Try copying things over in chunks, and skip that file.
Here's the answer from a different forum:
http://forums.afterdawn.com/thread_view.cfm/344692
Similar Messages
-
Error 0x80070057: The parameter is incorrect on Copy Paste
Hi,
When trying to copy a file off a networked drive I get the following error: Error 0x80070057: The parameter is incorrect.
This is the second time this has occurred. The first time I was trying to copy 4 files and 3 of them were copied correctly and the other was not. The solution then was to add it to a zip archive and then copy that.
This time, adding it to an archive does not work.
This is not a file path issue, other files with longer source and destination paths copy fine.
Any idea what is going on?
Cheers,
JasonHi,
Before going any further, I would like to verify these siturations:
1 Does this issue occur with other type of file?
2 Does this issue occur when copy from USB drive?
Parameter is incorrect is an idiopathic symptom (it could be a network connection problem, a file with unrecognizable attributes, a corrupted file, or any number
of other causes). That is the error that windows reports and it doesn't tend to be very helpful in diagnosing the actual problem.
For your case, please try to reinstall WinRAR, and logon with
Clean Boot
to see if the same issue occurs.
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
I have a procedure used to make http post requests to a REST web service external to my SQL server, using MSXML2.ServerXMLHttp via POST request. This procedure works without issue in SQL 2008 r2, but upon upgrade to 2012, begins to fail with the message
: "The Parameter is incorrect."
It is failing when I attempt to exec the 'send' method on line 137. I cannot find any documentation about how the MSXML2.ServerXMLHttp object needs to be treated differently in 2012. I found a similar question here: http://social.technet.microsoft.com/Forums/sqlserver/en-US/a6de1eea-5fe9-4087-809b-524c98f20a4d/msxml6dll-methodsend-dont-work-in-windows-server-2012-and-sql-2008r2?forum=sqlxml
But it isn't resovled - just indications to file a bug report - and one solution that says to just copy the DLL from 2008 over to 2012 to fix the issue. Is that really the right solution here or does someone have information on how to do this properly with
2012?
Here is my procedure:
CREATE procedure [dbo].[HTTP_REQUEST](@response varchar(4000) out,
@method varchar(64),
@p1name varchar(256) = null,
@p1value varchar(max) = null,
@p2name varchar(256) = null,
@p2value varchar(max) = null,
@p3name varchar(256) = null,
@p3value varchar(max) = null,
@p4name varchar(256) = null,
@p4value varchar(max) = null,
@p5name varchar(256) = null,
@p5value varchar(max) = null,
@p6name varchar(256) = null,
@p6value varchar(max) = null,
@parent_table varchar(30) = null
As
Declare
@obj int
,@hr int
,@status int
,@msg varchar(255)
,@apiKey varchar (64)
,@params varchar (max)
SET @apiKey = (Select a.default_value from T_DEFAULTS a WHERE a.parent_table = @parent_table AND a.field_name = 'm2apiKey')
SET @params = ''
If @apiKey is null
Begin
select @msg = 'Invalid mail2 APIKey'
RAISERROR(@msg, 11, 2) WITH SETERROR
return -101
End
If @method is null
Begin
select @msg = 'No valid mail2 API method provided'
RAISERROR(@msg, 11, 2) WITH SETERROR
return -101
End
exec @hr = sp_OACreate 'MSXML2.ServerXMLHttp', @obj OUT
if @hr <> 0 begin Raiserror('sp_OACreate MSXML2.ServerXMLHttp.3.0
failed', 16,1) return end
exec @hr = sp_OAMethod @obj, 'open', NULL, 'POST', 'http://api.someapiurl.net/REST/', true
if @hr <>0 begin set @msg = 'sp_OAMethod Open failed' goto eh end
exec @hr = sp_OAMethod @obj, 'setRequestHeader', NULL, 'Content-Type',
'application/x-www-form-urlencoded'
if @hr <>0 begin set @msg = 'sp_OAMethod setRequestHeader failed' goto
eh end
--Set Timeouts
exec @hr = sp_OAMethod @obj, 'setTimeouts',NULL,5000,5000,10000,10000
if @hr <>0 begin set @msg = 'sp_OAMethod setTimeouts failed' goto
eh end
--Add Method
SET @params = '&method='+@method
--Add API key
SET @params = @params + '&key='+@apiKey
--Add p1 if present
IF @p1name IS NOT NULL
BEGIN
SET @params = @params + '&' + @p1name + '=' + @p1value
END
--Add p2
IF @p2name IS NOT NULL
BEGIN
SET @params = @params + '&' + @p2name + '=' + @p2value
END
--Add p3
IF @p3name IS NOT NULL
BEGIN
SET @params = @params + '&' + @p3name + '=' + @p3value
END
--Add p4
IF @p4name IS NOT NULL
BEGIN
SET @params = @params + '&' + @p4name + '=' + @p4value
END
--Add p5
IF @p5name IS NOT NULL
BEGIN
SET @params = @params + '&' + @p5name + '=' + @p5value
END
--Add p6
IF @p6name IS NOT NULL
BEGIN
SET @params = @params + '&' + @p6name + '=' + @p6value
END
--SELECT @params
--Send the request
exec @hr = sp_OAMethod @obj, send, NULL, @params
if @hr <>0 begin set @msg = 'sp_OAMethod Send failed' goto eh end
--Get the status
exec @hr = sp_OAGetProperty @obj, 'status', @status OUT
if @hr <>0 begin set @msg = 'sp_OAGetProperty read status failed on get status' goto
eh
end
if @status <> 200 begin set @msg = 'sp_OAMethod http status ' +
str(@status) goto eh end
if @status = 200 begin print 'sp_OAMethod http status is 200:Successful ' +
str(@status) + @params end
exec @hr = sp_OAGetProperty @obj, 'responseText', @response OUT
if @hr <>0 begin set @msg = 'sp_OAGetProperty read response failed on get response text error code' + convert(varchar,@hr) goto
eh end
exec @hr = sp_OADestroy @obj
return
eh:
exec @hr = sp_OADestroy @obj
Raiserror(@msg, 16, 1)
return
Many thanks for the input -
ChrisHow can I fix the problem? changing the OS? I just bought the new server. I do?
thanks
Miky
Rambaldi -
We are using DPM Version: 4.1.3465.0 with System Center 2012 Service Pack 1 to back up VMs in our Hyper V Cluster. We have a total of 37 VMs with a combination of 2008r2 servers and 2012 servers. One of our 2012 servers will not backup, and we consistently
get the message "An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))". I have seen this error message when I Googled it, but cannot get past it. I have deleted the Protection Group and
data and tried to re-create, but get the same errors. I also thought the the server might be mis-reporting the data size, but I expanded that to cover the replication data. I have also tried to perform consistancy checks multiple times with no luck. I have
not seen a difinitive answer from my Google searches, so was hopeful someone has seen this also, and have had success in resolving. Currently this server has no backup recovery points, so I am worried if it does crash. I think I have the rollups installed
as well.Hi Kelly,
does the issue still persists? -
Hi,
Im trying to backup a system state in windows server 2008 R2 HAPP02 using DPM 2010 and im recieving the following error.
Source: Backup, Event ID 5
The backup operation that started at '2011-09-19T06:08:29.143748400Z' has failed with following error code '2155347997'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
I tried to run WBADMIN START SYSTEMSTATEBACKUP -backupTarget:c: and then i recieve the following error
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Please wait while system state files to back up are identified.
This might take several minutes...
Found (1113) files.
Found (6575) files.
Found (10393) files.
Found (13356) files.
Found (16175) files.
Found (27117) files.
Found (30612) files.
Found (34342) files.
Found (36966) files.
Found (40656) files.
Found (41935) files.
Found (45428) files.
Found (48639) files.
Found (51805) files.
Found (57721) files.
Found (64792) files.
Found (72735) files.
Found (77340) files.
Found (81183) files.
Found (81254) files.
Found (81254) files.
Found (81254) files.
The search for system state files is complete.
Starting to back up files...
The backup of files reported by 'Task Scheduler Writer' is complete.
The backup of files reported by 'VSS Metadata Store Writer' is complete.
The backup of files reported by 'Performance Counters Writer' is complete
The backup of files reported by 'IIS Config Writer' is complete.
Overall progress: 0%.
Currently backing up files reported by 'System Writer'...
Overall progress: 1%.
Currently backing up files reported by 'System Writer'...
Overall progress: 2%.
Currently backing up files reported by 'System Writer'...
Overall progress: 4%.
Currently backing up files reported by 'System Writer'...
Overall progress: 5%.
Currently backing up files reported by 'System Writer'...
Overall progress: 7%.
Currently backing up files reported by 'System Writer'...
Overall progress: 8%.
Currently backing up files reported by 'System Writer'...
Overall progress: 9%.
Currently backing up files reported by 'System Writer'...
Overall progress: 11%.
Currently backing up files reported by 'System Writer'...
Overall progress: 12%.
Currently backing up files reported by 'System Writer'...
Overall progress: 13%.
Currently backing up files reported by 'System Writer'...
Overall progress: 15%.
Currently backing up files reported by 'System Writer'...
Summary of the backup operation:
The backup of the system state failed [2011-09-19 09:42].
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-19-09-2011_09-36-37.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-19-09-2011_09-36-37.log
The operation ended before completion.
The parameter is incorrect.
When i check the backup_error log file i found the following error
Error in backup of C:\ during read: Error [0x80070057] The parameter is incorrect.
Any ideas about the error?
Thanks in advnace,
Laith.sorry for the delay.
This error condition has been found with Anti-virus software.
Use Msconfig to disable all antivirus services and Startup items [or uninstall temporarily] and test.
Reviewing logs.
[0]0ED8.124C::09/22/2011-14:05:02.204 [usa]HardWrite: NtWriteFile failure: 0xc000009d, 0xbb9ee000, 0x10000
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::SetFormatStatus
backup.cpp@4817] ERROR:Format was unable to complete successfully, final result: 57
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::FormatMedia
backup.cpp@4740] ERROR:Format on
\\?\Volume{d841345f-e505-11e0-bb05-00155d646a25} failed.
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::FormatMedia
backup.cpp@4746] INFO:Format done
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::MountVHD
backup.cpp@15683] ERROR:FormatMedia
\\?\Volume{d841345f-e505-11e0-bb05-00155d646a25} failed, hr: 0x80780046
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@15702] EXIT: CBlbBackupAsync::MountVHD
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::CreateVHD
backup.cpp@9127] ERROR:MountVHD failed for
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901\9f1ea685-a26b-11de-bbc7-806e6f6e6963.vhd failed hr=0x80780046
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@9138] EXIT: CBlbBackupAsync::CreateVHD
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@9592] EXIT: CBlbBackupAsync::PrepareTargetVolumesForSSB
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::BackupToMediaForSSB
backup.cpp@10379] ERROR:SSB call failed with hr=0x807800c5, detailed hr=0x80780046
[0]ed8.124c 09/22/2011-14:05:02.208 [blbsrv
restoresystemstate.cpp@131] ENTER: CBlbsrvSystemStateRestore::StopFileLogging
[0]ed8.124c 09/22/2011-14:05:02.208 [blbsrv
restoresystemstate.cpp@138] EXIT: CBlbsrvSystemStateRestore::StopFileLogging
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@10449] EXIT: CBlbBackupAsync::BackupToMediaForSSB
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::PerformSystemStateBackup
backup.cpp@17287] WARNING:SSB operation unsuccessful with hr=0x80780046
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbSystemStateBackupAsync::SetState
systemstatebackup.cpp@1061] INFO:ENGINE STATE:BACKUP SYSTEM STATE:5
[0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::PerformSystemStateBackup
backup.cpp@17300] INFO:Backup has system state = 0
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@17306] EXIT: CBlbBackupAsync::PerformSystemStateBackup
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@17331] ENTER: CBlbBackupAsync::UpdateBackupInfoIfRequired
[0]ed8.124c 09/22/2011-14:05:02.208 [service
backup.cpp@17379] EXIT: CBlbBackupAsync::UpdateBackupInfoIfRequired
[0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper
componentbackuphelper.cpp@1456] ENTER: CBlbComponentBackupHelper::BackupComplete
[0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper CBlbComponentBackupHelper::BackupComplete
componentbackuphelper.cpp@1460] INFO:bIsBackupFailed: 0
[0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper
componentbackuphelper.cpp@1261] ENTER: CBlbComponentBackupHelper::BuildSppBackupCompleteStateArray
[0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper
componentbackuphelper.cpp@1323] EXIT: CBlbComponentBackupHelper::BuildSppBackupCompleteStateArray
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: CVssAsrAPIBackup::GetVolumeComponents
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: BootGetWinREVolGuid
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: _GetElementData
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn][WPP_ASR_ERROR] NT STATUS ERROR 0xc0000225(STATUS_NOT_FOUND) [status]: (bootlib.cpp:497)
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]EXIT: _GetElementData
[0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]EXIT: BootGetWinREVolGuid
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrsys][WPP_ASR_INFO]Disk
\\?\Volume{9f1ea685-a26b-11de-bbc7-806e6f6e6963} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrsys][WPP_ASR_INFO]Disk
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrsys][WPP_ASR_INFO]Disk
\\?\Volume{d513444f-a276-11de-b33e-00155d663512} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrwriter][WPP_ASR_INFO]cComponents = 3 , cMaxComponents = 5 (asrwriterbackup.cpp:602)
[0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: CVssAsrAPIBackup::GetVolumeComponents
[0]0F3C.0EE0::09/22/2011-14:05:02.429 [asrcmn]ENTER: CVssAsrAPIBackup::GetDiskComponents
[0]0F3C.0EE0::09/22/2011-14:05:02.429 [asrcmn]ENTER: DiskListInitialize
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: GetDriveTypeByHandle
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: GetDriveTypeByHandle
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrsys][WPP_ASR_INFO]Disk
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: GetDriveTypeByHandle
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: GetDriveTypeByHandle
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrsys][WPP_ASR_INFO]Disk
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: DiskListInitialize
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: DiskListMarkClusteredDisks
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: DiskListMarkClusteredDisks
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: DiskListPopulateLayoutInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrsys][WPP_ASR_INFO]Getting disk info:
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrbkup.cpp:1415)
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: AsrpGetDiskLayout
[0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: DiskForceDriversSync
[0]0F3C.0EE0::09/22/2011-14:05:02.709 [asrcmn]EXIT: DiskForceDriversSync
[0]0F3C.0EE0::09/22/2011-14:05:02.709 [asrcmn]ENTER: AsrpGetMorePartitionInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.709 [asrcmn]ENTER: GetRdisk0DeviceNumber
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]EXIT: GetRdisk0DeviceNumber
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]ENTER: AsrGetSystemVolumeGlobalRootPath
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]EXIT: AsrGetSystemVolumeGlobalRootPath
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: AsrpGetMorePartitionInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: AsrpGetDiskLayout
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrsys][WPP_ASR_INFO]Disk device number=1 (asrbkup.cpp:1495)
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrsys][WPP_ASR_INFO]Getting disk info:
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrbkup.cpp:1415)
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: AsrpGetDiskLayout
[0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: DiskForceDriversSync
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]EXIT: DiskForceDriversSync
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: AsrpGetMorePartitionInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: GetRdisk0DeviceNumber
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]EXIT: GetRdisk0DeviceNumber
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: AsrGetSystemVolumeGlobalRootPath
[0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: AsrGetSystemVolumeGlobalRootPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: DiskBuildDevicePartitionPath
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrOpen
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: MtMgrGetMountPoints
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: MtMgrGetSymbolicNames
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: AsrpGetMorePartitionInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: AsrpGetDiskLayout
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrsys][WPP_ASR_INFO]Disk device number=0 (asrbkup.cpp:1495)
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: DiskListPopulateLayoutInfo
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]ENTER: DiskListMarkOfflineDisks
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrsys][WPP_ASR_INFO]Getting Online/Offline disk:
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrsys.cpp:233)
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrsys][WPP_ASR_INFO]Getting Online/Offline disk:
\\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrsys.cpp:233)
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: DiskListMarkOfflineDisks
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: CVssAsrAPIBackup::GetDiskComponents
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]ENTER: CVssAsrAPIBackup::GetBcdComponent
[0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
[0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]ENTER: GetVolumeNameFromDeviceName
[0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]EXIT: GetVolumeNameFromDeviceName
[0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]EXIT: CVssAsrAPIBackup::GetBcdComponent
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3149] ENTER: CBlbBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3209] ENTER: CBlbBackupAsync::QueryVolumeBackupStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [componenthelper
componentbackuphelper.cpp@1850] ENTER: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [componenthelper
componentbackuphelper.cpp@1944] EXIT: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3342] EXIT: CBlbBackupAsync::QueryVolumeBackupStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3359] ENTER: CBlbBackupAsync::QuerySystemStateBackupStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
systemstatebackup.cpp@740] ENTER: CBlbSystemStateBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
systemstatebackup.cpp@874] EXIT: CBlbSystemStateBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3399] EXIT: CBlbBackupAsync::QuerySystemStateBackupStatus
[0]ed8.f68 09/22/2011-14:05:03.228 [service
backup.cpp@3192] EXIT: CBlbBackupAsync::QueryStatus
[0]ed8.124c 09/22/2011-14:05:03.742 [componenthelper
componentbackuphelper.cpp@1518] EXIT: CBlbComponentBackupHelper::BackupComplete
[0]ed8.124c 09/22/2011-14:05:03.742 [service
backup.cpp@6290] ENTER: CBlbBackupAsync::WriteBackupComponents
[0]ed8.124c 09/22/2011-14:05:03.742 [blbengutils
BlbSecurityUtils.cpp@1146] ENTER: CBlbImpersonationHelper::ImpersonateCaller
[0]ed8.124c 09/22/2011-14:05:03.742 [blbengutils CBlbImpersonationHelper::ImpersonateCaller
BlbSecurityUtils.cpp@1178] INFO:No impersonation done.
[0]ed8.124c 09/22/2011-14:05:03.742 [blbengutils
BlbSecurityUtils.cpp@1183] EXIT: CBlbImpersonationHelper::ImpersonateCaller
[0]ed8.124c 09/22/2011-14:05:03.743 [util
systemutils.cpp@709] ENTER: BlbutilRegReadDWORD
[0]ed8.124c 09/22/2011-14:05:03.743 [util BlbutilRegReadDWORD
systemutils.cpp@731] WARNING:RegQueryValueEx NoTargetSnapshot unsuccessful, hr:0x80070002
[0]ed8.124c 09/22/2011-14:05:03.743 [util
systemutils.cpp@749] EXIT: BlbutilRegReadDWORD
[0]ed8.124c 09/22/2011-14:05:03.755 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.755 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:03.755 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.755 [service
backup.cpp@6444] EXIT: CBlbBackupAsync::WriteBackupComponents
[0]ed8.124c 09/22/2011-14:05:03.755 [service
backup.cpp@8946] ENTER: CBlbBackupAsync::UpdateLocalCatalogAfterbackup
[0]ed8.124c 09/22/2011-14:05:03.755 [service
backup.cpp@7790] ENTER: CBlbBackupAsync::GetComponentsList
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'TasksStore' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (0) <NULL>\TasksStore.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'WriterMetadataStore' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (1) <NULL>\WriterMetadataStore.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'PerformanceCounters' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (2) <NULL>\PerformanceCounters.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'WMI' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (3) <NULL>\WMI.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'IISMETABASE' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (4) <NULL>\IISMETABASE.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'COM+ REGDB' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (5) <NULL>\COM+ REGDB.
[0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'IISCONFIG' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (6) <NULL>\IISCONFIG.
[0]ed8.124c 09/22/2011-14:05:03.768 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'System Files' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (7) <NULL>\System Files.
[0]ed8.124c 09/22/2011-14:05:03.768 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
componentbackuphelper.cpp@249] INFO:Component 'Registry' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::GetComponentsList
backup.cpp@7856] INFO:Adding component (8) <NULL>\Registry.
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@7917] EXIT: CBlbBackupAsync::GetComponentsList
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@7943] ENTER: CBlbBackupAsync::AddComponentsToLocalCatalog
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@7961] EXIT: CBlbBackupAsync::AddComponentsToLocalCatalog
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@11835] ENTER: CBlbBackupAsync::SetVolumesInLocalCatalog
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@1557] ENTER: CBlbVolumeBackupContext::GetOriginalAccessPath
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@1585] EXIT: CBlbVolumeBackupContext::GetOriginalAccessPath
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::SetVolumesInLocalCatalog
backup.cpp@11894] INFO:Not adding volume C: to catalog since it failed
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::SetVolumesInLocalCatalog
backup.cpp@11943] ERROR:Backup of all the source volumes failed.
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@11970] EXIT: CBlbBackupAsync::SetVolumesInLocalCatalog
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::UpdateLocalCatalogAfterbackup
backup.cpp@8986] ERROR:CBlbBackupAsync::SetVolumesInLocalCatalog failed with hr=0x80780049
[0]ed8.124c 09/22/2011-14:05:03.768 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.768 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:03.768 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@9050] EXIT: CBlbBackupAsync::UpdateLocalCatalogAfterbackup
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@15335] ENTER: CBlbBackupAsync::RemoveESPCache
[0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::RemoveESPCache
backup.cpp@15338] INFO:No esp cache created, so not freeing up
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@15345] EXIT: CBlbBackupAsync::RemoveESPCache
[0]ed8.124c 09/22/2011-14:05:03.768 [service BlbBackupThreadFunc
backup.cpp@19732] INFO:BlbBackupThreadFunc took 363232 ms to complete
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@15795] ENTER: CBlbBackupAsync::DismountAllVHDs
[0]ed8.124c 09/22/2011-14:05:03.768 [service
backup.cpp@15723] ENTER: CBlbBackupAsync::DismountVHD
Unknown( 70): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 68): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 69): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 77): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 78): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 74): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 79): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 80): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 71): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
Unknown( 72): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
[0]ed8.124c 09/22/2011-14:05:03.769 [service CBlbBackupAsync::DismountVHD
backup.cpp@15744] ERROR:CBlbVhdHelper::Dismount failed for '\\?\Volume{d841345f-e505-11e0-bb05-00155d646a25}', hr: 0x80070490
[0]ed8.124c 09/22/2011-14:05:03.769 [service
backup.cpp@15775] EXIT: CBlbBackupAsync::DismountVHD
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.769 [service
backup.cpp@15819] EXIT: CBlbBackupAsync::DismountAllVHDs
[0]ed8.124c 09/22/2011-14:05:03.769 [service BlbBackupThreadFunc
backup.cpp@19738] WARNING:DismountAllVHDs unsuccessful with hr=0x80070490
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbBackupTargetUtils.cpp@3225] ENTER: BlbDeleteOldBackupLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1258] ENTER: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@637] ENTER: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@589] ENTER: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@618] EXIT: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@693] EXIT: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1151] ENTER: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbFindFiles
BlbFsUtils.cpp@1208] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup\Backup-*'
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1232] EXIT: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbDeleteOldLogFiles
BlbFsUtils.cpp@1303] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup', retaining '5' logs
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1336] EXIT: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1258] ENTER: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@637] ENTER: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@589] ENTER: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@618] EXIT: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@693] EXIT: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1151] ENTER: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbFindFiles
BlbFsUtils.cpp@1208] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup\Backup_Error*'
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1232] EXIT: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbDeleteOldLogFiles
BlbFsUtils.cpp@1303] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup', retaining '5' logs
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1336] EXIT: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1258] ENTER: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@637] ENTER: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@589] ENTER: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@618] EXIT: GetWindowsLogsDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [util
blbtrace.cpp@693] EXIT: GetBlbTracingDirectory
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1151] ENTER: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbFindFiles
BlbFsUtils.cpp@1208] INFO:Found '0' log files in path 'C:\Windows\Logs\WindowsServerBackup\Backup_Operations*'
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1232] EXIT: BlbFindFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbDeleteOldLogFiles
BlbFsUtils.cpp@1303] INFO:Found '0' log files in path 'C:\Windows\Logs\WindowsServerBackup', retaining '5' logs
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbFsUtils.cpp@1336] EXIT: BlbDeleteOldLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbBackupTargetUtils.cpp@3260] EXIT: BlbDeleteOldBackupLogFiles
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils CBlbImpersonationHelper::Revert
BlbSecurityUtils.cpp@1215] INFO:No revert needed.
[0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
[0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper
componentbackuphelper.cpp@1456] ENTER: CBlbComponentBackupHelper::BackupComplete
[0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper CBlbComponentBackupHelper::BackupComplete
componentbackuphelper.cpp@1460] INFO:bIsBackupFailed: 1
[0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper CBlbComponentBackupHelper::BackupComplete
componentbackuphelper.cpp@1473] INFO:BackupComplete already attempted.
[0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper
componentbackuphelper.cpp@1518] EXIT: CBlbComponentBackupHelper::BackupComplete
[0]ed8.124c 09/22/2011-14:05:03.769 [service
backup.cpp@13649] ENTER: CBlbBackupAsync::DeleteSourceSnapshotsIfNeeded
[0]ed8.124c 09/22/2011-14:05:03.769 [service
PerformanceManager.cpp@550] ENTER: CPerformanceManager::Initialize
[0]ed8.124c 09/22/2011-14:05:03.769 [service
PerformanceManager.cpp@281] ENTER: CPerformanceManager::QueryPerformanceSettings
[0]ed8.124c 09/22/2011-14:05:03.770 [service CPerformanceManager::QueryPerformanceSettings
PerformanceManager.cpp@382] INFO:Buffer size is 4. First line is <NULL>
[0]ed8.124c 09/22/2011-14:05:03.770 [service CPerformanceManager::QueryPerformanceSettings
PerformanceManager.cpp@389] INFO:Custom performance settings is empty.
[0]ed8.124c 09/22/2011-14:05:03.770 [service
PerformanceManager.cpp@484] EXIT: CPerformanceManager::QueryPerformanceSettings
[0]ed8.124c 09/22/2011-14:05:03.770 [service
PerformanceManager.cpp@560] EXIT: CPerformanceManager::Initialize
[0]ed8.124c 09/22/2011-14:05:03.777 [util
systemutils.cpp@709] ENTER: BlbutilRegReadDWORD
[0]ed8.124c 09/22/2011-14:05:03.777 [util BlbutilRegReadDWORD
systemutils.cpp@731] WARNING:RegQueryValueEx DoNotDeleteFFBSnapshot unsuccessful, hr:0x80070002
[0]ed8.124c 09/22/2011-14:05:03.777 [util
systemutils.cpp@749] EXIT: BlbutilRegReadDWORD
[0]ed8.124c 09/22/2011-14:05:03.777 [service
PerformanceManager.cpp@585] ENTER: CPerformanceManager::GetSettingsForVolume
[0]ed8.124c 09/22/2011-14:05:03.777 [service
PerformanceManager.cpp@620] EXIT: CPerformanceManager::GetSettingsForVolume
[0]ed8.124c 09/22/2011-14:05:03.777 [service CBlbBackupAsync::DeleteSourceSnapshotsIfNeeded
backup.cpp@14045] INFO:Deleting current snapshot (\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy8\)
[0]ed8.124c 09/22/2011-14:05:03.931 [service
backup.cpp@14082] EXIT: CBlbBackupAsync::DeleteSourceSnapshotsIfNeeded
[0]ed8.124c 09/22/2011-14:05:03.933 [service
backup.cpp@14432] ENTER: CBlbBackupAsync::SetSourceDiffAreasIfNeeded
[0]ed8.124c 09/22/2011-14:05:03.933 [service
backup.cpp@14539] EXIT: CBlbBackupAsync::SetSourceDiffAreasIfNeeded
[0]ed8.124c 09/22/2011-14:05:03.933 [service
backup.cpp@14737] ENTER: CBlbBackupAsync::ResetTargetDiffAreaSize
[0]ed8.124c 09/22/2011-14:05:03.933 [service CBlbBackupAsync::ResetTargetDiffAreaSize
backup.cpp@14754] INFO:Not resetting diff area
[0]ed8.124c 09/22/2011-14:05:03.933 [service
backup.cpp@14866] EXIT: CBlbBackupAsync::ResetTargetDiffAreaSize
[0]ed8.124c 09/22/2011-14:05:03.963 [service BlbBackupThreadFunc
backup.cpp@19873] ERROR:Backup operation aborted with hr=80780049
[0]ed8.124c 09/22/2011-14:05:03.963 [service CBlbSystemStateBackupAsync::SetState
systemstatebackup.cpp@1061] INFO:ENGINE STATE:BACKUP SYSTEM STATE:5
[0]ed8.124c 09/22/2011-14:05:03.963 [service CBlbBackupAsync::SetState
backup.cpp@14709] INFO:ENGINE STATE:BACKUP:12. Previous state:8
[0]ed8.124c 09/22/2011-14:05:03.963 [util
fileutils.cpp@1388] ENTER: BlbutilDeleteDirectory
[0]ed8.124c 09/22/2011-14:05:03.963 [util
fileutils.cpp@1183] ENTER: BlbutilDeleteDirectory2
[0]ed8.124c 09/22/2011-14:05:03.970 [util
fileutils.cpp@1344] EXIT: BlbutilDeleteDirectory2
[0]ed8.124c 09/22/2011-14:05:03.970 [util BlbutilDeleteDirectory
fileutils.cpp@1443] INFO:Aborting deletion of
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901 as one or more diectories or files are not getting deleted
[0]ed8.124c 09/22/2011-14:05:03.970 [util BlbutilDeleteDirectory
fileutils.cpp@1463] INFO:Total number of files/directories deleted in
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901 is 17
[0]ed8.124c 09/22/2011-14:05:03.970 [util BlbutilDeleteDirectory
fileutils.cpp@1465] INFO:Deleting
\\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901 took 0 ms
[0]ed8.124c 09/22/2011-14:05:03.970 [util
fileutils.cpp@1467] EXIT: BlbutilDeleteDirectory
[0]ed8.124c 09/22/2011-14:05:03.970 [service
backup.cpp@12718] ENTER: CBlbBackupAsync::PublishAllBackupStopEvents
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbBackupAsync::PublishAllBackupStopEvents
backup.cpp@13047] INFO:Backup info for Volume [hr=8078001D, detailed hr = 0, Flags=1574, backupTypeDetermined = 1, IsCritical = 1]
[0]ed8.124c 09/22/2011-14:05:03.971 [componenthelper
componentbackuphelper.cpp@1850] ENTER: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.124c 09/22/2011-14:05:03.971 [componenthelper
componentbackuphelper.cpp@1944] EXIT: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.124c 09/22/2011-14:05:03.971 [service
systemstatebackup.cpp@1526] ENTER: CBlbSystemStateBackupAsync::GetSSBTimes
[0]ed8.124c 09/22/2011-14:05:03.971 [service
systemstatebackup.cpp@1531] EXIT: CBlbSystemStateBackupAsync::GetSSBTimes
[0]ed8.124c 09/22/2011-14:05:03.971 [blbengutils
BlbSqmUtils.cpp@342] ENTER: PublishBackupSqmDatapoint
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@13273] EXIT: CBlbBackupAsync::PublishAllBackupStopEvents
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@15016] ENTER: CBlbBackupAsync::UpdateBackupStatInRegistry
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@14895] ENTER: CBlbBackupAsync::GetLastSuccessfulBackupInfo
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbBackupAsync::GetLastSuccessfulBackupInfo
backup.cpp@14960] INFO:Last successful backup stats. utc time 0, target name (NULL), target access path (NULL)
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@14991] EXIT: CBlbBackupAsync::GetLastSuccessfulBackupInfo
[0]ed8.124c 09/22/2011-14:05:03.971 [helper
blbBackupStatUpdater.cpp@205] ENTER: CBlbBackupStatUpdater::SaveStatsToRegistry
[0]ed8.124c 09/22/2011-14:05:03.971 [helper CBlbBackupStatUpdater::SaveStatsToRegistry
blbBackupStatUpdater.cpp@233] INFO:RegOpenKeyEx was unsuccessful for HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsBackup. hr=0x80070002
[0]ed8.124c 09/22/2011-14:05:03.971 [helper
blbBackupStatUpdater.cpp@368] EXIT: CBlbBackupStatUpdater::SaveStatsToRegistry
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbBackupAsync::UpdateBackupStatInRegistry
backup.cpp@15058] WARNING:pBlbBackupStatUpdater->SaveStatsToRegistry unsuccessful with hr=0x80070002. This should be fine on server skus.
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@15069] EXIT: CBlbBackupAsync::UpdateBackupStatInRegistry
[0]ed8.124c 09/22/2011-14:05:03.971 [service BlbBackupThreadFunc
backup.cpp@19957] WARNING:UpdateBackupStatInRegistry unsuccessful with hr=80070002
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
restoresystemstate.cpp@259] ENTER: CBlbsrvSystemStateRestore::FinalRelease
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
restorefiles.cpp@162] ENTER: CBlbsrvRestoreFiles::FinalRelease
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
srvutil.cpp@139] ENTER: BlbsrvFreeRestoreFileSpecs
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
srvutil.cpp@151] EXIT: BlbsrvFreeRestoreFileSpecs
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
restorefiles.cpp@210] EXIT: CBlbsrvRestoreFiles::FinalRelease
[0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
restoresystemstate.cpp@312] EXIT: CBlbsrvSystemStateRestore::FinalRelease
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbAsync::Done
async.cpp@187] INFO:Marking async operation as completed
[0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbAsync::Done
async.cpp@190] INFO:Calling CompleteAsyncOperation for parent operation
[0]ed8.124c 09/22/2011-14:05:03.971 [service
backup.cpp@19987] EXIT: BlbBackupThreadFunc
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3149] ENTER: CBlbBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3209] ENTER: CBlbBackupAsync::QueryVolumeBackupStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [componenthelper
componentbackuphelper.cpp@1850] ENTER: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [componenthelper
componentbackuphelper.cpp@1944] EXIT: CBlbComponentBackupHelper::FillComponentConsistencyStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3342] EXIT: CBlbBackupAsync::QueryVolumeBackupStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3359] ENTER: CBlbBackupAsync::QuerySystemStateBackupStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
systemstatebackup.cpp@740] ENTER: CBlbSystemStateBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
systemstatebackup.cpp@874] EXIT: CBlbSystemStateBackupAsync::QueryStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3399] EXIT: CBlbBackupAsync::QuerySystemStateBackupStatus
[0]ed8.f68 09/22/2011-14:05:04.227 [service
backup.cpp@3192] EXIT: CBlbBackupAsync::QueryStatus
[0]bf0.fe0 09/22/2011-14:05:04.228 [util
blbtrace.cpp@853] ENTER: BlbStopTracing
[0]bf0.fe0 09/22/2011-14:05:04.228 [util
blbtrace.cpp@397] ENTER: BlbStopTracing
[0]bf0.fe0 09/22/2011-14:05:04.228 [util
blbtrace.cpp@51] ENTER: BlbAllocateEventTraceProp
[0]bf0.fe0 09/22/2011-14:05:04.228 [util
blbtrace.cpp@83] EXIT: BlbAllocateEventTraceProp
Log Name: Microsoft-Windows-Backup
Source: Microsoft-Windows-Backup
Date: 9/22/2011 1:28:44 AM
Event ID: 5
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HEIAPP02.heimstaden.local
Description:
The backup operation that started at '2011-09-22T06:22:24.687716500Z' has failed with following error code '2155347997'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Sumesh P - Microsoft Online Community Support -
Error Message: "The parameter is incorrect" when trying to modify SSLs
Like I wrote in my subject line, RoboHelp pop-ups the error message “The Parameter is incorrect” when I try to modify any SSL.
What happens next, is that the “Print Document General” window opens, but does not allow me to select anything (the fields are blank).
If I close the window and open it again, it seems to work until I have to select the styles from our Microsoft Word Template.
Then the error message “The parameter is incorrect” appears again, and RoboHelp does not allow me to select anything but a stylesheet
(which is not what I need).
This is very strange, because not only until recently I was able to build Word documents and PDFs, but also my colleagues are able to
produce them out of my source.
Even the old projects, that I was able to build, now I cannot.
I do not have any problem in generating CHMs.
Until now I have tried everything I found in the forum:
I deleted the PSS file (also following the advice in your snippet number 14 from 10 – RoboHelp HTML –Features and Use).
http://forums.adobe.com/thread/120022
I reinstalled RoboHelp and the Adobe Technical Communication Suite (I also used CCleaner to delete the registries).
http://forums.adobe.com/thread/598335
I gave Administrator rights to all users in my computer (what seemed to work for some SSLs, but not for all)
http://forums.adobe.com/thread/870339
I am also looking at all programs that I installed since the last time I was able to build .docs in case there is a conflict, but I do not find anything!
My computer has Windows 7 installed and I use the Adobe Technical Communication Suite 3.5, with RoboHelp 9.
My Microsoft Office is 2010.
Can somebody please help me? Did someone have the same problem?
Thanks in advance.Hi there
I know you said you reinstalled, but did you reinstall before or after you gave administrator rights to all users on your computer? And how many users *ARE* on your computer?
Often you need administrator rights to properly install things.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
Application Error - The parameter is incorrect
During a call on skype, as I was playing a video game, my computer encountered a "blue screen of death". I figured there was something wrong with my hard drive but when my computer rebooted, it seemed fine. However, after my computer attempted to start up applications many of them crashed and restarted with no problem. Except skype, I encountered an application error saying "The parameter is incorrect". I then tried uninstalling and installing, but as I was trying to install Skype it gave me a more specific error "Exception EOutOfResources in module Skype.exe at 0016DED2. The parameter is incorrect". Please help! I cannot install Skype at all.
Attachments:
application error.PNG 29 KBTry first to reset all Skype settings.
Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
Restart Skype.
N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder. -
Initial cause of problem was trying to duplicate bootable SD card and it wrote it to C Drive system partition. Finally stumbled around and got system volume rebuilt and got it running again but Recovery partition got deleted in the process. I used W7 Recover/repair since Toshiba options seemed to be to overwrite everything (backup was month old, so wanted to avoid restoring since system files and data were still "there". I can use Toshiba program to make Repair, Recovery and Image copies. However, I cannot use W7 Backup program to make a Repair disk or Image backup. I get the error message: "System Repair disc could not be created The parameter is incorrect (0x80070057)"
I suspose the next thing to try would be to run System file checker since W7 sees a problem that the Toshiba utilities do not detect. Is there any "risk" of running the system file checker (sfc.exe), which also changes permissions on all system files.
I would like to correct any lurking system file problem, but also don't want to take a step backward trying to correct it. I have a W7 Windows disk.
Would appreciate suggestion.... leave alone and trust Toshiba image/recovery DVD I've made, try to correct it or leave well enough alone and hope it doesn't bite me later when I need to do a recovery. Thanks....Hi! I just got to add my 2 cents! Very nice replies and good information. Nice work Jerry and eagle!
Dokie!
Just one small problem the link has a down load manager. I'll let eagle explain that?? My advise is not to use a down load manager period! If you scroll down to the bottomof the page, you will be fine.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture48.JPG 297 KB
Capture49.JPG 146 KB -
I'm getting this on only one of my many virtual servers for some reason.. i've dug around.. i saw there may be a "private" fix for this issue..
The specific message is:
The replica of Volume D:\ on server02.domain.local is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing recovery points,
but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))
This is not a sharepoint server..
Any thoughts here
EDIT:
I am not seeing any indication of errors on the event viewer of the server being backed up..
Tech, the Universe, Everything: http://tech-stew.comHi,
We have released the fix in UR1.
Issues that are fixed in System Center 2012 R2 Data Protection Manager Update Rollup 1
Issue 1
A 0x80070057 error occurs when a session is closed prematurely. This error is caused by a failure during a consistency check.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Remote App can't print- Error: The parameter is incorrect
good morning everyone!
I have a server 2012R2 with RDS and I published remoteapp in RD Web also my users can access but...
When they log in their sessions from their computers want to print (for example in notepad) it gives the next message: "The parameter is incorrect".
They connect through a VPN SSL using a FG.
have anyone have this issue?
thanks for your time.1. You can try reinstalling Printer drivers.
2. Reconfigure printer on client machine
remove printer -> add printer -> local
3. Check the RDS server, Whether Printer redirection is enabled or not,
host machine: Computer configuration -> windows components -> remote desktop services -> remote desktop session host -> printer redirection
set "use remote desktop easy print printer driver first" to disabled
Restart client machine
Regards,
Manjunath Sullad -
SQL The Parameter is incorrect
Hi!
I have installed the latest SQL MP (6.5.4.0) at a Swedish customer that before have a lot of running script errors that was caused by the SQL MP difference scripts. Now we only get one of this alarm left. The alarm is "Operations manager failed to start
a process" from many of the SQL servers. We get two difference text descriptions:
1) The text says that the "The parameter is incorrect" the workingflow is from
Microsoft.SQLServer.2012.DBEngine.ServiceMonitor
Microsoft.SQLServer.2008.Database.ServiceMonitor
2) The text says that the "Processes is ending with 0" the workingflow is from
Microsoft.SQLServer.2012.Database.Configuration.TomPagrDetection
Microsoft.SQLServer.2012.DBEngineDiscoveryRule.Server
//Mats AHi Mats,
Please first update the Monitor Agent:
Update Rollup for Microsoft Monitoring Agent (KB 3032946)
https://support.microsoft.com/en-us/kb/3032946
Is there any event log error? Please also help capture a screenshot.
Btw, did you see any performance issue on the mointor servers? If so, please increase the desktop heap on the mointor servers.
1. Open regedit and take a backup.
2. Go to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems\Windows. Export it for backup purpose.
3. The default data for this registry value will look something like the following (all on one line):
%SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,20480,768 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=sxssrv,4 ProfileControl=Off MaxRequestThreads=16
4. Modify the SharedSection to SharedSection=1024,20480,1536
5. Save and reboot the machine.
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Error while opening HFM Application "The Parameter is Incorrect"
I have recently installed HFM 11.1.2.1 and created an applicatiion. When I try to open that application, system is giving an error message stating "The Parameter is Incorrect"
Error Reference Number: {DB65561D-1ECC-4227-9361-BB662D71078A};User Name: admin@Native Directory
Num: 0x80070057;Type: 0;DTime: 8/24/2011 5:08:09 PM;Svr: HYPERION;File: CHsxServerImpl.cpp;Line: 2025;Ver: 11.1.2.1.000.3082;
Num: 0x80070057;Type: 0;DTime: 8/24/2011 5:08:15 PM;Svr: HYPERION;File: CHsxServerImpl.cpp;Line: 2361;Ver: 11.1.2.1.000.3082;
Num: 0x80070057;Type: 0;DTime: 8/24/2011 5:08:15 PM;Svr: HYPERION;File: CHsxServerImpl.cpp;Line: 4092;Ver: 11.1.2.1.000.3082;
Num: 0x80070057;Type: 1;DTime: 8/24/2011 5:08:15 PM;Svr: HYPERION;File: CHsxServer.cpp;Line: 1460;Ver: 11.1.2.1.000.3082;DStr: OpenApplication: DEMOAPP;
Num: 0x80070057;Type: 0;DTime: 8/24/2011 5:08:15 PM;Svr: HYPERION;File: CHsxClient.cpp;Line: 2417;Ver: 11.1.2.1.000.3082;
Did I do something wrong in the installation?After upgrading to version 9.3.3, 11.1.1.3.50 or 11.1.2.1 this error could occur with the below scenario...
The cause was due to a program change in these upgrade version, with how logins work when accessing HFM via workspace. Any login to HFM that does not go through workspace, will inconsistently cause this error.
To resolve this issue in version 11.1.2.1, download and apply Patch 12865428.
Refer : Financial Management Error "The Parameter Is Incorrect" Appears Frequently in HsvEventlog.log After Upgrade to Version 9.3.3, 11.1.1.3.50 or 11.1.2.1 (Doc ID 1290122.1) -
I tried to backup my computer and it didn't make any progress for many hours. After a few hours I gave up and closed the backup panel. I restarted the computer and now the panel comes blank with the external backup drive plugged in. If I double click
the backup folder on the external drive and click restore I keep getting the error dialogue, "The parameter is incorrect. (0x80080057)".
If I don't plug in the drive it and click Options > Change backup settings I get the same error dialogue. Note, the backup control panel displays and says the drive is not plugged in and shows the last time I attempted to backup. It says that backup was
complete but some files were skipped. The error code is 0x8100002F.
I tried to solve the problem using: http://support.microsoft.com/kb/982736/en-us It did not help.
I have looked into some of the logs and found this:
Description
Windows Backup failure
Problem signature
Problem Event Name: WindowsBackupFailure
Operation: Backup
AppVer: 6.1.7601
HRESULT: 0x81000015
TargetType: 11
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Files that help describe the problem
WindowsBackup.1.etl
This is the second to last time I backed up.
Someone else had this problem: http://www.techsupportforum.com/forums/f299/solved-windows-7-backup-0x80070057-error-546542.html
They had a restore image and could go back to an earlier time. I do not have this option.
What can I do?Hi,
I doubt this was External harddrive problem. Please check Event log about VSS error log. If there is any error message with VSS.
If so, please refer to the link below for more details about VSS error.
http://technet.microsoft.com/en-us/library/ee692290(v=ws.10).aspx
In addition, please also try to backup your system to other location for test if it had same problem. If not, it should be external drive problem.
Roger Lu
TechNet Community Support -
"The parameter is incorrect" is the error msg. on a blank screen when I log in to a particular web site.
Of many tabs at the site only one gives this error.
Without logging in I can navigate as I desire.
I access this site on a daily basis. Using Safari is no problem at all.
FF 16.0.2 on a mac 10.6.8 this also occurred before upgrade to 16.0.2
I have not applied any bells or whistles to FF . . to my knowledge.
BobClear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
Contribute 6.5 the parameter is incorrect error
I have three clients who all have the same problem on the same day on different site. When they try to edit a page and add a link they get an error message 'the parameter is incorrect' - if they continue to add link from the pop up box Contribute crashes. Any ideas?
Not sure if you've tried, but you might get better/faster answers in the Contribute Forum: Contribute General Discussion
Maybe you are looking for
-
On a brand new Yoga 3 PRO 1370 - I am getting very low WIFI signal on all my routers. Compared side by side : Think pad yoga and yoga 3 pro - the first one have full bars on signal , the 3 pro have only 1-2 bars and disconnect all the time. Only whe
-
Up until 2 months ago my Canon Power Shot G6 has always worked with my IMac. However, my system no longer recognizes the camera upon connecting via usb. Why? What should I do?
-
Toshiba 50M2U Display Issue - Help!
Colors are not displaying correctly on our Toshiba; dark colors are replaced with a green hue. It's most noticible in the initial boot up, with the red TOSHIBA logo appearing on top of a green screen that should normally be black. I messed around wit
-
Help.................. I am definitely missing something. I want to do something like the attached, stacked bar chart example. This is pretty much one of the examples. What I need is for a horizontal chart instead of a vertical. When I right click
-
Installation of SAP BO 4.0
Hi guys, I have to install SAP 4.0 in my client server on top of MES Camstar Intelligence. The client has give me two keys: 1- SAP BusinessObjects Enterprise for Query, Reporting and Analysis for NUL-5 2- SAP BusinessObjects Enterprise for Query, Rep