Executing multiple SQL statements fails using ODBC
Executing multiple SQL statements will fail with error 'ORA-00911 invalid character' when connecting to an Oracle database using ODBC driver version 8.01.07.00.
When I use either my application or the Oracle ODBC Test client utility connecting using ODBC driver version 8.01.07.00 I can only get a single CALL statement (as shown below) to execute:
CALL BHInsert (TO_DATE('2003.07.23 10:04:28','YYYY.MM.DD HH24:MI:SS'),'BATCH_ID','1:CLS_FRENCHVANILLA-1','
','Event File
Name','\\KILLIANS\BATCHCTL\SampleDemo1\JOURNALS\1.evt','','AREA1','','','','','','1','','','','','',' ','');
When I try to execute the following string with multiple CALL statements (as shown below) it fails with the following error being returned - ORA-00911: invalid character
CALL BHInsert (TO_DATE('2003.07.23 10:04:28','YYYY.MM.DD HH24:MI:SS'),'BATCH_ID','1:CLS_FRENCHVANILLA-1','
','Event File
Name','\\KILLIANS\BATCHCTL\SampleDemo1\JOURNALS\1.evt','','AREA1','','','','','','1','','','','','',' ','');
CALL BHInsert (TO_DATE('2003.07.23 10:04:28','YYYY.MM.DD
HH24:MI:SS'),'BATCH_ID','1:CLS_FRENCHVANILLA-1','Version','Recipe Header','1.0','','AREA1',' ','
','','','','1','','','','','',' ','');
CALL BHInsert (TO_DATE('2003.07.23 10:04:28','YYYY.MM.DD
HH24:MI:SS'),'BATCH_ID','1:CLS_FRENCHVANILLA-1','Version Date','Recipe Header','5/18/2001 1:28:32
PM','','AREA1',' ',' ','','','','1','','','','','',' ','');
CALL BHInsert (TO_DATE('2003.07.23
10:04:28','YYYY.MM.DD HH24:MI:SS'),'BATCH_ID','1:CLS_FRENCHVANILLA-1','Author','Recipe Header','Mark
Shepard','','AREA1',' ',' ','','','','1','','','','','',' ','');
I've tried adding a line feed in addition to the space at the end of each call but that doesn't seem to help. Also have tried unsuccessfully to change the seperator used between each call using various valid continuation characters.
Executing multiple CALL statements from within Oracle's SQL Worksheet connecting as the same user and password, as my application executes successfully. However when I try this from within the Oracle ODBC test client, it fails with the same ORA-00911 error that I'm seeing in my application.
I'm currently trying the more recent ODBC drivers, however any ideas or suggestions would be greatly appreciated.
Can you take the begin ... end block and run it using SQL*Plus?
I can't think of any documentation that would specifically answer this question. I'm sure if you read & absorbed the ODBC Programmers Reference (2000+ pages) you'd be able to find out, but I don't know of a quick way to find out.
You can enable SQL*Net tracing. There are a fair number of options for enabling this tracing-- http://tahiti.oracle.com has all the Oracle manuals online, which should give you enough info to configure exactly what you want.
I would suggest, however, that you look into more performant/ scalable alternatives rather than going too far down this path. A block with lots of SQL statements with literals isn't going to make your database happy even if you get it to work.
Justin
Similar Messages
-
How to execute multiple sql statements
hi all
i am wondering if i can execute multiple sql statements in one shot with >> execute immediate command
for example:
i define the variable as X := sql statement
Y := sql statement
z := sql statement
can i do execute immediate (X,Y, Z);
if yes how ?? and if not any possible alternate
thanksStarting with Ganesh's code
DECLARE
l_statement VARCHAR2 (2000);
v_passwd VARCHAR2 (200);
v_username VARCHAR2 (200) := 'test';
v_pwd_key VARCHAR2 (200) := 'lwty23';
v_dblink_name VARCHAR2 (2000);
v_dblink_drop VARCHAR2 (2000);
v_dblink_create VARCHAR2 (2000);
v_dblink_check_connection VARCHAR2 (2000);
l_number NUMBER;
BEGIN
--<<c_instance>>
FOR c_instance IN (SELECT *
FROM v_oracle_instances
WHERE environment = 'Developement')
LOOP
SELECT encpwd_owner.display_db_encpwd (v_username,
c_instance.host_name,
c_instance.instance_name,
v_pwd_key)
INTO v_passwd
FROM DUAL;
v_dblink_name := c_instance.host_name || '_' || c_instance.instance_name;
v_dblink_create :=
' CREATE DATABASE LINK '
|| v_dblink_name
|| ' CONNECT TO '
|| v_username
|| ' '
|| 'IDENTIFIED BY '
|| v_passwd
|| ' USING'
|| ' ''(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)(HOST= '
|| c_instance.host_name
|| ')(PORT='
|| c_instance.LISTENER_PORT
|| '))(CONNECT_DATA=(SID='
|| c_instance.instance_name
|| ')))''';
v_dblink_check_connection := 'select 1 from global_name@' || v_dblink_name || '.QCM'; --- Notice this change. I am simply selecting 1. That should be enough to test the database link.
v_dblink_drop := 'drop database link ' || v_dblink_name || '.QCMTLAF';
-- l_statement := 'BEGIN ' || v_dblink_create ';' || v_dblink_check_connection ';' || v_dblink_drop '; END ;'
BEGIN
EXECUTE IMMEDIATE (v_dblink_create);
DBMS_OUTPUT.PUT_LINE ('DB Link ' || v_dblink_name || ' Created');
EXCEPTION
WHEN others THEN
dbms_output.put_line( 'Failed to create the database link ' || v_dblink_name );
dbms_output.put_line( dbms_utility.format_error_backtrace() );
INSERT INTO error_table( column_list )
VALUES( <<list of values>> );
END;
EXECUTE IMMEDIATE (v_dblink_check_connection) INTO l_number; --- Notice this.
DBMS_OUTPUT.PUT_LINE ('DB Link ' || v_dblink_name || ' Tested');
BEGIN
EXECUTE IMMEDIATE (v_dblink_drop);
DBMS_OUTPUT.PUT_LINE ('DB Link ' || v_dblink_name || ' Dropped');
EXCEPTION
WHEN others THEN
dbms_output.put_line( 'Failed to drop the database link ' || v_dblink_name );
dbms_output.put_line( dbms_utility.format_error_backtrace() );
INSERT INTO error_table( column_list )
VALUES( <<list of values>> );
END;
END LOOP;
END;But I agree with the point that others have brought up that it really doesn't make sense to create and drop a database link like this.
Justin -
How to execute multiple SQL statements thru frontend?
With SQL Server database, you can execute multiple SQL statements.
Ex.
SQLCommand cmd = new SQLCommand();
cmd.CommandText = "SELECT * FROM EMP; SELECT * FROM DEPT";
cmd.ExecuteXXX();
Note that for SQL Server, ";" (semocolon) is used as a separator.
What separator is required for Oracle ? Or rather, can I execute multiple SQL statements against Oracle database (10g) ?
(Why I want to do it is a totally diff. subject !)
Thanks,
Ami.Hello,
You could use an anonymous PL/SQL block to batch multiple statements.
If you want to use SELECT statements, you would open a REF CURSOR for each SELECT and return the REF CURSOR to your application. INSERT, UPDATE, and DELETE statements can just be passed as is.
A simple REF CURSOR example might look like:
begin
open :v_refcursor1 for select * from emp;
open :v_refcursor2 for select * from dept;
end;Where v_refcursor1 and v_refcursor2 are parameters defined as a REF CURSOR type.
Hope that helps a bit...
- Mark -
Issue on execute multiple SQL Statement on MySQL
Hi,I plan to execute dozenes of INSERT SQL statement on MySQL by JDBC:org.gjt.mm.mysql.Driver,But it throws the unkown exeption,pls kindly help
The code is like the follwoing
sql="insert into TEST values('100','test') ";
stmt=cnMySQL.createStatement();
stmt.addBatch(sql);
stmt.addBatch(sql);
stmt.executeBatch();
//stmt.executeUpdate(sql);The Exception is very tough,paste for all
javax.servlet.ServletException
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:497)
at org.apache.jsp.testBean_jsp._jspService(testBean_jsp.java:293)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:136)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:204)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:289)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2396)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:405)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:380)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:508)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:533)
at java.lang.Thread.run(Thread.java:484)
I have tried another way to execute multiple SQL.But the same Exception ocurred.
String sql="insert into TEST('100','100V'); "+
"insert into TEST('100','100V') ";
stmt.executeUpdate(sql);
Can't it the jdbc of MM support this kind of operation? And is there any better JDBC for mySQL?
Apprieciated for all!!! -
How to execute multiple sql statements in oracle?
I want to execute multiple statements in a single transaction in oracle. Following are my queries:
Create table temp_table as Select * from table;
SELECT * FROM temp_table d;
drop table temp_table ;
I am using sql comment text in asp.net
I am using executenonquery command in asp.net.
Thanks,
DivyaSigCle ,
Here's an example that executes 3 statements;
begin insert into foo values(1); insert into foo values(2); insert into foo values(3); end;
923354,
The block doesn't compile because temp_table doesn't exist at the point you're trying to compile the anonymous block. I'd recommend re-reading the doc link and forum link provided to get a better understanding of how temp tables work, as it's simply different with Oracle. You don't create Oracle temporary tables on the fly; you create them ahead of time and then just use them. The data itself is already specific to a particular session; you don't create and drop the table each time.
Also, you can't just "select * from table" in plsql. The results have to GO SOMEWHERE. Usually you'd either open a cursor and process it in the block, or send out a ref cursor if you want to send the data to a client side app. The ref cursor data wouldn't actually be fetched until the block completes though, so you'd need to use ON COMMIT PRESERVE ROWS, which would also mean you'd need to clean up the data yourself (delete the data from the table when you're done with it).
Corrections/comments welcome.
Greg -
Wish: Executing multiple SQL statements
I've noticed Raptor, SQL Worksheet, and Toad all execute everything from the beginning even if there was an error. This can be bad if the next statement depended on the first statement being successfull.
Also, when executing a single statement and you get an error, I've seen a message box pop up saying there was an error. This is annoying. Can there be an option to always put the error message in the script output?
Could you also have another option to execute a bunch of sql statements starting where the cursor is located? This way, if you were executing say 5 SQL statements, but it failed on the 3rd. You could correct the 3rd SQL statement, and then continue on starting with the 3rd.I tried preview 2 (0804), and it is awesome. Thank you so much!
This time, I didn't have to do anything. It ran out-of-the-box for me on Windows XP using Oracle 9i. I even still have all my other java runtimes and SDK's in the PATH. Nice work ignoring those. This should make my admins happy. And since we don't need to worry about the Oracle client, it will make the DBAs happy. Yay!
I tried what you mentioned, and it works.
WHENEVER SQLERROR EXIT FAILURE;
SELECT 1 FROM DUAL;
SELECT 2 FROM DUALX;
SELECT 3 FROM DUAL;
It stops executing on the SELECT 2 FROM DUALX; which is what I needed.
1
1
1 rows selected
Error starting at line 4 in command:
SELECT 2 FROM DUALX
Error report:
SQL Error: ORA-00942: table or view does not exist -
How to execute multiple sql statement?
In an single transaction I want to execute two update statements. I don't know how to break those statements and send to oracle from Asp.Net to execute.
I tried go and ; .
Below is myQuery string*
update abc set One = 10 where Two = 3 ; update xyz set Three = 10 where Four = 3 ;
Additional info
I am using sql comment text in asp.net
I am using executenonquery command in asp.net.Hi,
If you want to execute multiple statements in a single transaction, you could either:
a) create a local transaction (via an OracleTransaction object), then call executenonquery multiple times within that transaction, or
b) pass them all in an anonymous block for a single round trip.. ie, begin update abc set One = 10 where Two = 3 ; update xyz set Three = 10 where Four = 3 ;end;
The database doesn't permit multiple statements passed at once (other than in a plsql block).
Hope it helps, corrections/comments welcome
Greg
PS, questions such as this would be better posted in the ODP.NET forum; this forum is for issues regarding ODT.NET (a VS plugin)
ODP.NET -
JDBC -APPLET executing multiple SQL statements
Hello All,
Can I someone please help with this one.
I get the following error
java.sql.sqlException [Microsoft ODBC Manager] Invalid cursor State
when using
1. an ODBC datasource and connect using JDBC-ODBC
bridge.
2. Is it correct to use executeQuery & executeUpdate functions using the same connection and statement objects.
3. What is meant by the above error? This error occurs
while running the applet in Netscape
4. IE says can't class not found sun/jdbc/odbc
Expecting a useful reply.Dear Friend,
Invalid cursor state error occurs when you try to do something on a position of resultset which does not have any row in it. Example ,when you try to retrieve value from resultset when cursor is at beforefirst or afterlast. So you have to call next() so as to get value if the cursor is at beforefirst.
You can call any number of executexxx methods using a statement.
For free trial versions of JDBC Drivers visit www.Atinav.com -
Executing multiple SQL statements
I'm using the SQL worksheet in JDeveloper to run SQL statements. JDeveloper won't run more than one statement at a time. Here's an easy example:
SELECT COUNT(*)
FROM TABLE1
WHERE PRICE IS NULL;
SELECT COUNT(*)
FROM TABLE1
WHERE PRICE > 0;
I get the following error when I submit multiple statements: ORA-00911: invalid character. I'm using the studio edition version 10.1.3.2.0.
Does Anybody know how to go around this or it is just that JDeveloper doesn't handle multiple statements?Hi,
I don't have a 10.1.3 instance to check currently. I suppose there would be an option to run script (along with run option).
Try this.
Open the SQL worksheet.
Type the statements.
SELECT COUNT(*)
FROM TABLE1
WHERE PRICE IS NULL;
SELECT COUNT(*)
FROM TABLE1
WHERE PRICE > 0;Select all (Ctrl+A), right click and see if you have a Run Script option in the context menu. If yes, select and it would work fine.
-Arun -
How to execute multiple sql statements in parallel ?
Hi There,
I have 10 stored procedures, each one will take approximately 5 seconds to run individually.
Now I need to combine the results of these 10 stored procedures into single result set.
So I have created one more stored procedure "proc_AllSPs" to get the single result set.
The procedure "proc_AllSPs" is taking one minute to run because all the procedures inside the "proc_AllSPs" are running
one after the other and taking 5 seconds each.
If there is any other way that all the procedures run parallelly, then the procedure "proc_AllSPs" can run in 5 seconds time.
Sorry if I am not being elaborated.
PLease get back to me if any piece of information is needed.
Any kind of help is truly thankful.
Thanks,
SequelBugCould you tell me how to execute two stored procedures or two sql statements in parallel
For eg:
First procedure name is proc_sp1 which takes 1 minute to run
Second procedure name is proc_sp2 which takes 1 minute to run
I want to accomplish the below query in 1 minute by executing statement1 and statement2 parallelly.
go
select * from openrowswt('sqloledb','server','exec proc_sp1') --statement1
union
select * from openrowset('sqloledb','server','exec proc_sp2') --statement2
go
OR
go
Select * into #Temp1 from openrowswt('sqloledb','server','exec proc_sp1') --statement1
select * into #Temp2 from openrowset('sqloledb','server','exec proc_sp2') --statement2
Select * from #Temp1
UNION ALL
Select * from #Temp2
go
Thanks,
SequelBug -
Executing multiple sql statements from a single sql file
Hi, I am Vijay Krishna.
I want to drop user, drop tablespace, create tablespace and create user from a single executable file or a single sql file. The command should be in sequence. How can we achieve it? Can I anybody help me in this regard. I want this as soon as possible. It's urgent. Kindly post a reply.
Also, how can we know the oracle home directory from a java program? The problem is we should know the Oracle home directory and use it for creating the tablespace. In the userinterface we will give just for a new database user creation. I will be really thankfull if anybody can help me in this regard.It is showing any error messages.
I will diplay the entire batch file which we are using.
sqlplus / as sysdba
drop user examination cascade;
drop tablespace examination;
create tablespace examination
datafile 'C:\oracle\product\10.1.0\oradata\orcl\examination.dbf'
size 500M autoextend on;
create user examination identified by examination
default tablespace examination
quota unlimited on examination;
grant connect, resource to examination;
exit;
when i run the batch file from the DOS prompt it is entering into the sql prompt and coming out in a fraction of a second. We are just seeing a screen coming and going. But no error messages are being displayed.
first we thought that as we are giving the create tablespace and create user in the same file we created another file and tried without having the create commands. Even then the user didn't get dropped. -
Excuting multiple sql statements
Hi to everybody.
I'm quite new to Oracle even if i have quite a big experience with MySQL and SQL commands. I'm facing a problem that I suppose it is a really basic one.
I received a dump of an Oracle database in a .sql format. I mean that both the schema and the data are build through a large number of sql statements. In particular the schema is made through a lot of "create table ..." while the data are built through "insert into..". My need is to import these database in a fresh Oracle database Oracle 10 g XE.
I've installed it on a Debian system and i can succesfully execute a single SQL command both through the web interface http://localhost:8080/apex and logging as oracle user through the sqlplus username/passwd command.
My problem is that the data are split on about 12000 SQL "INSERT INTO.." so executing all of them one by one could be a little annoying :-)
<u>So I'm asking if there is a way to instruct Oracle to execute multiple SQL statements reading it from a file (like MySQL does for example).</u>
I' m considering to write a script to do it if there's no better way. I know that there're better way to dump databases in Oracle but I can change the .sql format since it is the only one that I got.in SQL*Plus you can execute a SQL file with the start command or it's shorthand version @:SQL> start filename.sql
or
SQL> @filename.sql -
MDM Database command execution error. A SQL statement failed to execute
Hi,
When we tried to execute an MDM Java query modify/create, we get the following dump.
Is this anything to do with the parameters that we pass or is it something to do with the database ?
We have checked the code and we do not find anything wrong with the code at all.
We are using Java API 5.5.63.73 and calling MDM API's using WebDynpro for Java.
I have noticed this issue has been raised here as well :
Database command execution error. (While mounting a repository)
com.sap.mdm.commands.CommandException:
com.sap.mdm.internal.protocol.manual.ServerException: Database command execution error. A SQL
statement failed to execute. The actual error may have been written to a log file. at
com.sap.mdm.data.commands.ModifyRecordCommand.execute(ModifyRecordCommand.java:163) at
Regards,
Subramanian V.
Edited by: Subramanian Venkateswaran on Dec 10, 2008 8:11 PMHi Subramanian ,
The error looks more like a problem with the data base or MDM system rather than the java code.
Which is the underlying database you are using with MDM? As some users have faced some difficulties when working with the DB2 Data base,If this is the data base you too are working upon then may be the issue could be similar,if possible try using the Oracle or SQL data base as these databse show more compatibility than a DB2 when working with MDM .
Also check the MDM users autorization and authentication to modifyor create recordrs in MDM.try given the user the ADMIN rights,and tehn try and see if teh user is able to modify/Create the mdm records.
Lastly you can check the database instance and listener configuration correctly.try restarting the Database service form the system if possible.
Hope It Helped
Thanks & Regards
Simona Pinto -
Execute multiple dml statements concurrently.
Hi all,
I have a requirement to execute multiple dml statements at the same time. I tried to achieve this using dbms_job, but failed.
I scheduled 3 dbms_job at the same time. Each job has a bulk insert statement, inserting into a single target table. The 3 jobs kicked off, but there were close a minute apart.
Is there any other way to achieve this?You can launch 3 separate SQL Plus sessions, but how do you execute the dml statements at the same exact time?From my desktop machine, here's how I'd do it:
Create a dos batch file (runall.cmd for example) that looks like this:
start some_command.cmd
start some_command.cmd
start some_command.cmd
Then just double click on it. This will lauch some_command.cmd in 3 separate sessions. Each will be launched but will not wait to complete before launching the next.
Inside the batch file, some_command.cmd, you can have whatever you want. But it will probably be sqlplus.exe with some command line options (one of them a .sql script).
This is how I've used Tom Kite's "DIY Parallelization". But I normally would have a parameter (like a range or something) to keep the DMLs mutually exclusive. -
Hi all,
I have an Windows XP OS with SP3.
I have installed the Oracle 11g server.
On trying to connect to the ODBC connection, i get the following error message:
Unable to connect SQL State=S1000 [Oracle][ODBC][Ora]ORA-12170: TNS: Connect timeout occured
On trying the tnsping,
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 09-OCT-2
011 13:11:05
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
E:\app\Gautam\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.
5.207)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl))
TNS-12535: TNS:operation timed out
On trying to connect with SQL Developer, i get the following error:
Status: Failure - Test failed: Io Exception: The Network Adapter could not establish the connection
However i am able to connect to the same using SQL Plus
Another issue that occurs is that the Oracle Enterprise Manager shows the following error after a while:
Agent Connection to Instance
Status Failed
Details ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
The following services are all up during this point of time:
OracleDBConsoleorcl
OracleOraDb11g_home1TNSListener
OracleServiceORCL
Any help in this regard will be very useful as this is hindering the progress of my work.
Thanks in advance for the help.
- Gautam841683 wrote:
Hi,
I did try and delete my listener.ora and then create a new one..
That did not solve my issue..
What are the steps for configuring the listener again.
Thanks for the response..
- Gautamno listener.ora file is required.
just do as below
lsnrctl start
Maybe you are looking for
-
Java API for running entire ".sql" files on a remote DB ( mySQL or Oracle)?
Hi, Would anyone happen to know if there's a java API for executing entire ".sql" files (containing several different SQL commands), on a remote database server ? It's enough if the API works with MySQL and/or Oracle. Just to demonstrate what i'm loo
-
Core Image and Intel GMA950 graphics processor
Does the Intel GMA950 graphics processor support Core Image? Mac Mini Mac OS X (10.4.4)
-
Query about use activex control in Developer form
I'm an oracle developer and My name is milton datta.I cant' use activex control in forms.Pls. anybody would help me how to use activex control in developer forms.If possible provide me with some examples. my email address is [email protected]
-
I have 2 movies, "Sneak Peek: America The Story of Us" on my computer attempting to download. One is HD 156.9 MB, the other 62.3 MB. I have tried several things to remove them from my account but that doesn't work. What can I do to remove them?
-
Why will some email attachments not open with firefox but will with another browser
PDF attachments and some pictures won't open.