Execution of $ORACLE_HOME/root.sh
Hi There,
We are installing SAP portal on Oracle and solaris. I had a doubt for execution of $ORACLE_HOME/root.sh as root user.
Do we need to execute $ORACLE_HOME/root.sh as root user only(what is process if root user access not provided to us) or can we use other user with root privilages. Please provide your valueble inputs ASAP.
Regards,
If you look into the script root.sh, you will see a hard-coded check for user root.
So the answer will be:
No, you cannot use other user.
Edit this script at your own risk ....
Similar Messages
-
Error CLSRSC-507 during the execution of root.sh on second node
Hi all.
OS.......: Red-Hat 6.5
RDBMS: Oracle 12.1.0.2.0
During the installation of a 2-node RAC in a RHEL 6.5, during the execution of the root.sh script in the second node, i get the following error:
[root@oraprd02 grid]# ./root.sh
Performing root user operation.
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/12.1.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /u01/app/12.1.0/grid/crs/install/crsconfig_params
2015/05/04 22:47:16 CLSRSC-4001: Installing Oracle Trace File Analyzer (TFA) Collector.
2015/05/04 22:47:59 CLSRSC-4002: Successfully installed Oracle Trace File Analyzer (TFA) Collector.
2015/05/04 22:48:00 CLSRSC-363: User ignored prerequisites during installation
OLR initialization - successful
2015/05/04 22:48:46 CLSRSC-507: The root script cannot proceed on this node oraprd02 because either the first-node operations have not completed on node oraprd01 or there was an error in obtaining the status of the first-node operations.
Died at /u01/app/12.1.0/grid/crs/install/crsutils.pm line 3681.
The command '/u01/app/12.1.0/grid/perl/bin/perl -I/u01/app/12.1.0/grid/perl/lib -I/u01/app/12.1.0/grid/crs/install /u01/app/12.1.0/grid/crs/install/rootcrs.pl ' execution failed
The root.sh on the first node completed successfully. I get the succeeded message from the script in the first node.
Have anyone faced this problem? Any assistance will be most helpfull.
Thanks in advance.crsd and cssd logs were empty and there was no relevant info in crs alert
i am just reinstalling clusterware now
one thing i wanted to ask
why does owner ship of raw files change back to root (after node restart)
even though i chnged them to oracle -
Grid installation: root.sh failed on the first node on Solaris cluster 4.1
Hi all,
I'm trying to install the Grid (11.2.0.3.0) on the 2 node-clusters (OSC 4.1).
When I run the root.sh on the first node, I got the out put as follow:
xha239080-root-5.11# root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /Grid/CRShome
Enter the full pathname of the local bin directory: [/usr/local/bin]:
/usr/local/bin is read only. Continue without copy (y/n) or retry (r)? [y]:
Warning: /usr/local/bin is read only. No files will be copied.
Creating /var/opt/oracle/oratab file...
Entries will be added to the /var/opt/oracle/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /Grid/CRShome/crs/install/crsconfig_params
Creating trace directory
User ignored Prerequisites during installation
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding Clusterware entries to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'xha239080'
CRS-2676: Start of 'ora.mdnsd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'xha239080'
CRS-2676: Start of 'ora.gpnpd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'xha239080'
CRS-2672: Attempting to start 'ora.gipcd' on 'xha239080'
CRS-2676: Start of 'ora.cssdmonitor' on 'xha239080' succeeded
CRS-2676: Start of 'ora.gipcd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'xha239080'
CRS-2672: Attempting to start 'ora.diskmon' on 'xha239080'
CRS-2676: Start of 'ora.diskmon' on 'xha239080' succeeded
CRS-2676: Start of 'ora.cssd' on 'xha239080' succeeded
ASM created and started successfully.
Disk Group DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk 9cdb938773bc4f16bf332edac499fd06.
Successful addition of voting disk 842907db11f74f59bf65247138d6e8f5.
Successful addition of voting disk 748852d2a5c84f72bfcd50d60f65654d.
Successfully replaced voting disk group with +DATA.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 9cdb938773bc4f16bf332edac499fd06 (/dev/did/rdsk/d10s6) [DATA]
2. ONLINE 842907db11f74f59bf65247138d6e8f5 (/dev/did/rdsk/d8s6) [DATA]
3. ONLINE 748852d2a5c84f72bfcd50d60f65654d (/dev/did/rdsk/d9s6) [DATA]
Located 3 voting disk(s).
Start of resource "ora.cssd" failed
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'xha239080'
CRS-2672: Attempting to start 'ora.gipcd' on 'xha239080'
CRS-2676: Start of 'ora.cssdmonitor' on 'xha239080' succeeded
CRS-2676: Start of 'ora.gipcd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'xha239080'
CRS-2672: Attempting to start 'ora.diskmon' on 'xha239080'
CRS-2676: Start of 'ora.diskmon' on 'xha239080' succeeded
CRS-2674: Start of 'ora.cssd' on 'xha239080' failed
CRS-2679: Attempting to clean 'ora.cssd' on 'xha239080'
CRS-2681: Clean of 'ora.cssd' on 'xha239080' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'xha239080'
CRS-2677: Stop of 'ora.gipcd' on 'xha239080' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'xha239080'
CRS-2677: Stop of 'ora.cssdmonitor' on 'xha239080' succeeded
CRS-5804: Communication error with agent process
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Grid Infrastructure stack
Failed to start Cluster Synchorinisation Service in clustered mode at /Grid/CRShome/crs/install/crsconfig_lib.pm line 1211.
/Grid/CRShome/perl/bin/perl -I/Grid/CRShome/perl/lib -I/Grid/CRShome/crs/install /Grid/CRShome/crs/install/rootcrs.pl execution failed
xha239080-root-5.11# history
checking the ocssd.log, I see some thing as follow:
2013-09-16 18:46:24.238: [ CSSD][1]clssscmain: Starting CSS daemon, version 11.2.0.3.0, in (clustered) mode with uniqueness value 1379371584
2013-09-16 18:46:24.239: [ CSSD][1]clssscmain: Environment is production
2013-09-16 18:46:24.239: [ CSSD][1]clssscmain: Core file size limit extended
2013-09-16 18:46:24.248: [ CSSD][1]clssscmain: GIPCHA down 1
2013-09-16 18:46:24.249: [ CSSD][1]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2013-09-16 18:46:24.250: [ CSSD][1]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2013-09-16 18:46:24.250: [ CSSD][1]clssscExtendLimits: The current soft limit for locked memory is 4294967293, hard limit is 4294967293
2013-09-16 18:46:24.250: [ CSSD][1]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2013-09-16 18:46:24.250: [ CSSD][1]clssscSetPrivEnv: Setting priority to 4
2013-09-16 18:46:24.253: [ CSSD][1]clssscSetPrivEnv: unable to set priority to 4
2013-09-16 18:46:24.253: [ CSSD][1]SLOS: cat=-2, opn=scls_mem_lockdown, dep=11, loc=mlockall
unable to lock memory
2013-09-16 18:46:24.253: [ CSSD][1](:CSSSC00011:)clssscExit: A fatal error occurred during initialization
Do anyone have any idea what going on and how can I fix it ?Hi,
solaris has several issues with DISM, e.g.:
Solaris 10 and Solaris 11 Shared Memory Locking May Fail (Doc ID 1590151.1)
Sounds like Solaris Cluster has a similar bug. A "workaround" is to reboot the (cluster) zone, that "fixes" the mlock error. This bug was introduced with updates in september, atleast to our environment (Solaris 11.1). Prior i did not have the issue and now i have to restart the entire zone, whenever i stop crs.
With 11.2.0.3 the root.sh script can be rerun without prior cleaning up, so you should be able to continue installation at that point after the reboot. After the root.sh completes some configuration assistants need to be run, to complete the installation. You need to execute this manually as you wipe your oui session
Kind Regards
Thomas -
Root.sh failed at second node OUL 6.3 Oracle GRID 11.2.0.3
Hi, im installing a two node cluster mounted on Oracle Linux 6.3 with Oracle DB 11.2.0.3, the installation went smooth up until the execution of the root.sh script on the second node.
THe script return this final lines:
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node nodo1, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
Start of resource "ora.crsd" failed
CRS-2800: Cannot start resource 'ora.asm' as it is already in the INTERMEDIATE state on server 'nodo2'
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Grid Infrastructure stack
Failed to start Cluster Ready Services at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 1286.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
In $GRID_HOME/log/node2/alertnode.log It appears to be a Cluster Time Synchronization Service issue, (i didn't synchronyze the nodes..) however the CTSS is running in observer mode, wich i believe it shouldn't affect the installation process. After that i lost it...there's an entry CRS-5018 indicating that an unused HAIP route was removed... and then, out of the blue: CRS-5818:Aborted command 'start' for resource 'ora.asm'. Some clarification will be deeply apreciated.
Here's the complete log:
2013-04-01 13:39:35.358
[client(12163)]CRS-2101:The OLR was formatted using version 3.
2013-04-01 19:40:19.597
[ohasd(12338)]CRS-2112:The OLR service started on node nodo2.
2013-04-01 19:40:19.657
[ohasd(12338)]CRS-1301:Oracle High Availability Service started on node nodo2.
[client(12526)]CRS-10001:01-Apr-13 13:41 ACFS-9459: ADVM/ACFS is not supported on this OS version: '2.6.39-400.17.2.el6uek.i686'
[client(12528)]CRS-10001:01-Apr-13 13:41 ACFS-9201: Not Supported
[client(12603)]CRS-10001:01-Apr-13 13:41 ACFS-9459: ADVM/ACFS is not supported on this OS version: '2.6.39-400.17.2.el6uek.i686'
2013-04-01 19:41:17.509
[ohasd(12338)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
2013-04-01 19:41:17.618
[gpnpd(12695)]CRS-2328:GPNPD started on node nodo2.
2013-04-01 19:41:21.363
[cssd(12755)]CRS-1713:CSSD daemon is started in exclusive mode
2013-04-01 19:41:23.194
[ohasd(12338)]CRS-2767:Resource state recovery not attempted for 'ora.diskmon' as its target state is OFFLINE
2013-04-01 19:41:56.144
[cssd(12755)]CRS-1707:Lease acquisition for node nodo2 number 2 completed
2013-04-01 19:41:57.545
[cssd(12755)]CRS-1605:CSSD voting file is online: /dev/oracleasm/disks/ASM_DISK_1; details in /u01/app/11.2.0/grid/log/nodo2/cssd/ocssd.log.
[cssd(12755)]CRS-1636:The CSS daemon was started in exclusive mode but found an active CSS daemon on node nodo1 and is terminating; details at (:CSSNM00006:) in /u01/app/11.2.0/grid/log/nodo2/cssd/ocssd.log
2013-04-01 19:41:58.549
[ohasd(12338)]CRS-2765:Resource 'ora.cssdmonitor' has failed on server 'nodo2'.
2013-04-01 19:42:10.025
[gpnpd(12695)]CRS-2329:GPNPD on node nodo2 shutdown.
2013-04-01 19:42:11.407
[mdnsd(12685)]CRS-5602:mDNS service stopping by request.
2013-04-01 19:42:29.642
[gpnpd(12947)]CRS-2328:GPNPD started on node nodo2.
2013-04-01 19:42:33.241
[cssd(13012)]CRS-1713:CSSD daemon is started in clustered mode
2013-04-01 19:42:35.104
[ohasd(12338)]CRS-2767:Resource state recovery not attempted for 'ora.diskmon' as its target state is OFFLINE
2013-04-01 19:42:44.065
[cssd(13012)]CRS-1707:Lease acquisition for node nodo2 number 2 completed
2013-04-01 19:42:45.484
[cssd(13012)]CRS-1605:CSSD voting file is online: /dev/oracleasm/disks/ASM_DISK_1; details in /u01/app/11.2.0/grid/log/nodo2/cssd/ocssd.log.
2013-04-01 19:42:52.138
[cssd(13012)]CRS-1601:CSSD Reconfiguration complete. Active nodes are nodo1 nodo2 .
2013-04-01 19:42:55.081
[ctssd(13076)]CRS-2403:The Cluster Time Synchronization Service on host nodo2 is in observer mode.
2013-04-01 19:42:55.581
[ctssd(13076)]CRS-2401:The Cluster Time Synchronization Service started on host nodo2.
2013-04-01 19:42:55.581
[ctssd(13076)]CRS-2407:The new Cluster Time Synchronization Service reference node is host nodo1.
2013-04-01 19:43:08.875
[ctssd(13076)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/app/11.2.0/grid/log/nodo2/ctssd/octssd.log.
2013-04-01 19:43:08.876
[ctssd(13076)]CRS-2409:The clock on host nodo2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
2013-04-01 19:43:13.565
[u01/app/11.2.0/grid/bin/orarootagent.bin(13064)]CRS-5018:(:CLSN00037:) Removed unused HAIP route: 169.254.0.0 / 255.255.0.0 / 0.0.0.0 / eth0
2013-04-01 19:53:09.800
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5818:Aborted command 'start' for resource 'ora.asm'. Details at (:CRSAGF00113:) {0:0:223} in /u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log.
2013-04-01 19:53:11.827
[ohasd(12338)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.asm'. Details at (:CRSPE00111:) {0:0:223} in /u01/app/11.2.0/grid/log/nodo2/ohasd/ohasd.log.
2013-04-01 19:53:12.779
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:53:13.892
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:53:43.877
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:54:13.891
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:54:43.906
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:55:13.914
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:55:43.918
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:56:13.922
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:56:53.209
[crsd(13741)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 20:07:01.128
[crsd(13741)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 20:07:01.278
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 20:07:08.689
[crsd(15248)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 20:13:10.138
[ctssd(13076)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/app/11.2.0/grid/log/nodo2/ctssd/octssd.log.
2013-04-01 20:17:13.024
[crsd(15248)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 20:17:13.171
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 20:17:20.826
[crsd(16746)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 20:27:25.020
[crsd(16746)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 20:27:25.176
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 20:27:31.591
[crsd(18266)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 20:37:35.668
[crsd(18266)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 20:37:35.808
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 20:37:43.209
[crsd(19762)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 20:43:11.160
[ctssd(13076)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/app/11.2.0/grid/log/nodo2/ctssd/octssd.log.
2013-04-01 20:47:47.487
[crsd(19762)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 20:47:47.637
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 20:47:55.086
[crsd(21242)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 20:57:59.343
[crsd(21242)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 20:57:59.492
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 20:58:06.996
[crsd(22744)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 21:08:11.046
[crsd(22744)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 21:08:11.192
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 21:08:18.726
[crsd(24260)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 21:13:12.000
[ctssd(13076)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/app/11.2.0/grid/log/nodo2/ctssd/octssd.log.
2013-04-01 21:18:22.262
[crsd(24260)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 21:18:22.411
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 21:18:29.927
[crsd(25759)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 21:28:34.467
[crsd(25759)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 21:28:34.616
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 21:28:41.990
[crsd(27291)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 21:38:45.012
[crsd(27291)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 21:38:45.160
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 21:38:52.790
[crsd(28784)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 21:43:12.378
[ctssd(13076)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/app/11.2.0/grid/log/nodo2/ctssd/octssd.log.
2013-04-01 21:48:56.285
[crsd(28784)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 21:48:56.435
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 21:49:04.421
[crsd(30272)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 21:59:08.183
[crsd(30272)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 21:59:08.318
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 21:59:15.860
[crsd(31772)]CRS-1012:The OCR service started on node nodo2.Hi santysharma, thanks for the reply, i have two ethernet interfaces: eth0 (public network 192.168.1.0) and eth1 (private network 10.5.3.0), there is no device using that ip range, here's the output of route command:
(Sorry for the alignment, i tried to tab it but the editor trims it again)
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
private * 255.255.255.0 U 0 0 0 eth1
link-local * 255.255.0.0 U 1002 0 0 eth0
link-local * 255.255.0.0 U 1003 0 0 eth1
public * 255.255.255.0 U 0 0 0 eth0
And the /etc/hosts file
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
10.5.3.1 nodo1.cluster nodo1
10.5.3.2 nodo2.cluster nodo2
192.168.1.13 cluster-scan
192.168.1.14 nodo1-vip
192.168.1.15 nodo2-vip
And the ifconfig -a
eth0 Link encap:Ethernet HWaddr C8:3A:35:D9:C6:2B
inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::ca3a:35ff:fed9:c62b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:34708 errors:0 dropped:18 overruns:0 frame:0
TX packets:24693 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:48545969 (46.2 MiB) TX bytes:1994381 (1.9 MiB)
eth1 Link encap:Ethernet HWaddr 00:0D:87:D0:A3:8E
inet addr:10.5.3.2 Bcast:10.5.3.255 Mask:255.255.255.0
inet6 addr: fe80::20d:87ff:fed0:a38e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:5344 (5.2 KiB)
Interrupt:23 Base address:0x6000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0 frame:0
TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1320 (1.2 KiB) TX bytes:1320 (1.2 KiB)
Now that i'm thinking i've read somewhere that ipv6 was no supported...yet there's no relation with the 169.254.x.x ip range. -
ORA-12154 as oracle user, whit the root account it works fine
Hello there,
I've a problem with a client installation if I try to connect to the database. I've the following configuration:
1. Database: Running on a Ubuntu Jeos VM, Oracle 11g (Release 11.1.0.6.0 64 bit)
2. Client: Running on a CentOS 5.2 VM, Oracle Client 10g Linux 32bit
I've configured the tnsnames.ora and stored it in the $ORACLE_HOME/network/admin directory. The content of the tnsnames.ora file is the following:
ORCL64=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.12.128)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
If I try to connect to the database as the oracle user with the following command sqlplus SYS@ORCL64 AS SYSDBA, I'll get the ORA-12154 TNS:could not resolve the connect identifier specified error message. If I try the same as the root user it works fine and I can establish the connection. The same result I've got if I try the command tnsping ORCL64. As the root user the tnsnames adapter can resolve the alias, as the oracle user this is'nt possible and I'll get the error message: TNS-03505: Failed to resolve name. In both he uses the paramter file /u01/app/oracle/network/admin/sqlnet.ora. The content of the sqlnet.ora file is the following:
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT).
Have you any suggestions how can I resolve this problem to get a connection with the oracle user.
Thank you in advance
SvenHello,
thanks for your answers. On the CentOS maschine, where the client is installed, there are no directory's $ORACLE_HOME/bin/oracle and $ORACLE_HOME/bin/lsnrctl. The output from the $ORACLE_HOME/network/admin/*ora is:
-rw-r----- 1 oracle oinstall 171 28. Apr 21:25 /u01/app/oracle/network/admin/sqlnet.ora
wx---- 1 root root 118 5. Mai 11:33 /u01/app/oracle/network/admin/tnsnames.ora
The post-install script $ORACLE_HOME/root.sh I've started.
On the Ubuntu Jeos VM, where the database is installed, the output from the 3 directories are:
ls -l $ORACLE_HOME/bin/oracle
-rwsr-s--x 1 oracle oinstall 188459338 2009-02-23 09:21 /u01/app/oracle/product/11.1.0/db_1/bin/oracle
ls -l $ORACLE_HOME/bin/lsnrctl
-rwxr-x--x 1 oracle oinstall 143599 2009-02-23 09:48 /u01/app/oracle/product/11.1.0/db_1/bin/lsnrctl
ls -l $ORACLE_HOME/network/admin/*ora
-rw-rw-r-- 1 oracle oinstall 542 2009-03-25 19:08 /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
-rw-rw-r-- 1 oracle oinstall 191 2009-02-23 09:57 /u01/app/oracle/product/11.1.0/db_1/network/admin/sqlnet.ora
-rw-rw-r-- 1 oracle oinstall 324 2009-03-25 19:12 /u01/app/oracle/product/11.1.0/db_1/network/admin/tnsnames.ora
Kind regards
Sven -
I would like to setup an action in Adobe Pro X that will OCR all files contained in a root directory and its subfolders. I change the "Start with" dialog to "A Folder on My Computer." A dialog pops up and lets me browse to the network drive. I select the drive and click ok.
I setup the OCR and other settings.
But when I run the action, it doesn't do anything.
If I instead setup the action by browsing to a specific folder on the network, the OCR runs correctly and OCR's all files, including the subfolders in the selected folder.
Is there a way to tell it to OCR everything in the folders and subfolders on the root network drive?For anyone else having this problem after running root.sh as root and who isn't getting it resolved after trying the above suggestion, you should check wether SELinux is enabled and preventing the memory relocation of shared libraries.
Check wether SELinux is enabled :
+/usr/sbin/selinuxenabled && echo SELINUX ENABLED+
Check wether you can load the libclntsh shared library by trying to start sqlplus ... $ORACLE_HOME/bin/sqlplus
An errormessage along these lines is a good indication SELinux is getting in your way:
sqlplus: error while loading shared libraries: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
(You should also see these errors in the logfile $ORACLE_HOME/cfgtoollogs/crsconfig/rootcrs_$HOSTNAME.log )
To resolve, deconfigure the Oracle clusterware stack, change the SELinux security context of the shared library and re-run root.sh. Everything as the root user:
su - root
+$ORACLE_HOME/crs/install/rootcrs.pl -verbose -deconfig -force+
chcon -t textrel_shlib_t /u01/app/11.2.0/grid/lib/libclntsh.so.11.1
+$ORACLE_HOME/root.sh+
Good luck.
-ycl -
Oracle 8.1.7 installation on Mandrake 9.2 Linux
Hello Oracle Linux experts,
I've got problem with installation of Oracle 8.1.7 on Mandrake 9.2 linux... I know that Mandrake not certified for running Oracle 8i - but may be someone could help ? I managed to install it successfully on 8.x and 9.0 versions
of Mandrake - but 9.2 (currently installed one giving me problems). I could finish the installation - but unfortunately not all oracle modules (including oracle binary) built successfully. And I've got some errors on a linking stage (even if I run setup_stubs.sh - and according to log file generated by this script all modules have been rebuild) Any suggestions ? Am I missing something ? This are the steps that I was using for Mandrake 9.0 and now I am trying the same ones on 9.2:
---cut---
This is what I've done:
1. Create oracle installation account (in my case 'ora817' and use 'dba' as primary group) As shell for this account I used 'bash'
2. Create all required directory structure for Oracle installation i.e.
ORACLE_BASE=/apps/ora_817
ORACLE_HOME=${ORACLE_BASE}/product/8.1.7
3. In home directory of ora817 use create / update file .bash_profile:
---.bash_profile---
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
# PATH=$PATH:$HOME/bin
# export PATH
# unset USERNAME
JAVA_HOME=/usr/local/java; export JAVA_HOME
ORACLE_BASE=/apps/ora_817; export ORACLE_BASE
ORACLE_HOME=${ORACLE_BASE}/product/8.1.7; export ORACLE_HOME
PATH=${PATH}:${ORACLE_HOME}/bin; export PATH
if [${LD_LIBRARY_PATH} == ""]
then
LD_LIBRARY_PATH=${ORACLE_HOME}/lib:/usr/lib:/usr/local/lib
else
LD_LIBRARY_PATH=${ORACLE_HOME}/lib:${LD_LIBRARY_PATH}
fi
export LD_LIBRARY_PATH
export LD_ASSUME_KERNEL=2.2.5
umask 002
unset LANG
unset LANGUAGE
---.bash_profile---
4. Update / create .bashrc file in the same directory:
---.bashrc---
# .bashrc
# User specific aliases and functions
# Source global definitions
if [ -f /etc/bashrc ]; then
. /etc/bashrc
fi
unset LANG
unset LANGUAGE
unset LC_MONETARY
unset LC_NUMERIC
unset LC_MESSAGES
unset LC_COLLATE
unset LC_CTYPE
unset LC_TIME
unset NLS_LANG
---.bashrc---
Then you would have to logout and login back so that changes take place and that's it - your Oracle Universal Installer will start !!!
Few other notes:
Before installation you would have to make sure that you got Java JDK-1.1.8 - file should be called:
jdk118_v3-glibc-2.1.3.tar.bz2
You could find it on the net.
During installation there will be step when you would have to run file $ORACLE_HOME/root.sh - make sure that you edit this file before execution:
Line 102:
RMF=/bin/rm -f
is changed into
RMF="/bin/rm -f"
and line 156
RUID=`/usr/bin/id|$AWK -F\( '{print $2}'|$AWK -F\) '{print $1}`
is changed into
RUID=`/bin/id|$AWK -F\( '{print $2}'|$AWK -F\) '{print $1}'`
Please note that id command in Mandrake 9.0 linux located in /bin directory and not in /usr/bin !
Also path for 'sed' module should be changed from /usr/local/bin to just /bin
After installation I suggest to unset LD_ASSUME_KERNEL
env variable and install and run glibc-2.1.3-stubs.tar.gz package that will relink modules for use with newer version of glibc. Copy this package to $ORACLE_HOME directory, untar it - i.e.
tar -xvzf ./glibc-2.1.3-stubs.tar.gzand then run ./setup_stubs.sh script. (make sure that you do so by the same user that was used during oracle installation)
This file you could get from oracle OTN web site.
---cut---
Regards,
AlexJust some additional information - I think that I found the problem - but no solution so far:
When I am trying to rebuild (relink) oracle (using relink script from $ORACLE_HOME/bin - it worked for all other options apart from 'oracle' and as a result oracle binary in
$ORACLE_HOME/bin is missing....) this is kind of error that I've got:
---cut---
- Linking Oracle
rm -f /apps/oracle/product/8.1.7/rdbms/lib/oracle
gcc -o /apps/oracle/product/8.1.7/rdbms/lib/oracle -L/apps/oracle/product/8.1.7/rdbms/lib/ -L/apps/oracle/product/8.1.7/lib/ -L/apps/oracle/product/8.1.7/lib//stubs/ -Wl,-E /apps/oracle/product/8.1.7/rdbms/lib/opimai.o /apps/oracle/product/8.1.7/rdbms/lib/ssoraed.o /apps/oracle/product/8.1.7/rdbms/lib/ttcsoi.o /apps/oracle/product/8.1.7/rdbms/lib/kpuasvr.o /apps/oracle/product/8.1.7/lib/nautab.o /apps/oracle/product/8.1.7/lib/naeet.o /apps/oracle/product/8.1.7/lib/naect.o /apps/oracle/product/8.1.7/lib/naedhs.o /apps/oracle/product/8.1.7/rdbms/lib/config.o -lserver8 -lskgxp8 -lclient8 -lvsn8 -lwtcserver8 -lcommon8 -lgeneric8 /apps/oracle/product/8.1.7/rdbms/lib/defopt.o -lknlopt -lslax8 -lpls8 -lplp8 -lserver8 -lclient8 -lvsn8 -lwtcserver8 -lcommon8 -lgeneric8 -lknlopt -lslax8 -lpls8 -lplp8 `cat /apps/oracle/product/8.1.7/rdbms/lib/nmliblist` -ldbicx8 -ldbicx8 -ljox8 -lserver8 -lwwg8 -lobk `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtcserver8 -lcommon8 -lgeneric8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtcserver8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtcserver8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lserver8 `if /usr/bin/ar tv /apps/oracle/product/8.1.7/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lordsdo8"; fi` -lordts8 -lctxc8 -lctx8 -lzx8 -lgx8 -lctx8 -lzx8 -lgx8 -lordvirt8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /apps/oracle/product/8.1.7/lib/sysliblist` `if [ -f /usr/lib/libsched.so ] ; then echo -lsched ; else true; fi` -Wl,-rpath,/apps/oracle/product/8.1.7/lib:/lib:/usr/lib -lm `cat /apps/oracle/product/8.1.7/lib/sysliblist` `if [ -f /usr/lib/libsched.so ] ; then echo -lsched ; else true; fi` -ldl -lm -ldl `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /apps/oracle/product/8.1.7/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lsql8 -lsql8
/usr//bin/ld: /apps/oracle/product/8.1.7/rdbms/lib/oracle: hidden symbol `__fixunssfdi' in /usr//bin/../lib/gcc-lib/i586-mandrake-linux-gnu/3.3.1/libgcc.a(_fixunssfdi.oS) is referenced by DSO
collect2: ld returned 1 exit status
make: *** [apps/oracle/product/8.1.7/rdbms/lib/oracle] Error 1
---cut---
Any comments ? -
Open-vm-tools/official vmware tools not installing.
I'm trying to install the latest offical vmware tools (16/9/2013) and open-vm-tools but both seem to always fail. I tried some of the patches listed on the wiki, but nothing got me anywhere. The big thing I'm trying to accomplish is to be able to use vmhgfs but, I'd like to have all the tools if possible. Here is what I did.
Open Vm Tools
#[root@localhost] - [14-01-01 18:09:33] - [/home/toxicarrow/Documents/firewall] - [R:0]
pacman -S open-vm-tools open-vm-tools-dkms
resolving dependencies...
looking for inter-conflicts...
Packages (2): open-vm-tools-5:2013.09.16-5 open-vm-tools-dkms-5:2013.09.16-5
Total Installed Size: 8.21 MiB
:: Proceed with installation? [Y/n]
(2/2) checking keys in keyring [#####################################################################################################################] 100%
(2/2) checking package integrity [#####################################################################################################################] 100%
(2/2) loading package files [#####################################################################################################################] 100%
(2/2) checking for file conflicts [#####################################################################################################################] 100%
(2/2) checking available disk space [#####################################################################################################################] 100%
(1/2) installing open-vm-tools [#####################################################################################################################] 100%
>>>
>>> You can mount VMware Shared Folders via:
>>> mount -t vmhgfs .host:/ /mnt/hgfs
>>>
>>> or by adding this line to /etc/fstab:
>>> .host:/ /mnt/hgfs vmhgfs defaults 0 0
>>>
Optional dependencies for open-vm-tools
gtkmm [installed]
libnotify [installed]
libxtst [installed]
fuse [installed]
libsm [installed]
open-vm-tools-modules: for linux kernel
open-vm-tools-dkms: for linux-lts and other kernels [pending]
netctl: suspend-resume network state [installed]
networkmanager: suspend-resume network state
(2/2) installing open-vm-tools-dkms [#####################################################################################################################] 100%
>>> Enable building of open-vm-tools modules:
>>> $ dkms add open-vm-tools/2013.09.16
>>>
>>> Enabling vmxnet driver in /usr/lib/modprobe.d/open-vm-tools-modules.conf
>>> (this will disable pcnet32 driver)
>>>
>>> If vmxnet driver doesn't handle your NIC, you have to manually
>>> disable loading of pcnet32 driver
>>>
#[root@localhost] - [14-01-01 18:09:47] - [/home/toxicarrow/Documents/firewall] - [R:0]
pacman -S open-vm-tools-modules
warning: open-vm-tools-dkms-5:2013.09.16-5 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Packages (1): open-vm-tools-dkms-5:2013.09.16-5
Total Installed Size: 5.57 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [#####################################################################################################################] 100%
(1/1) checking package integrity [#####################################################################################################################] 100%
(1/1) loading package files [#####################################################################################################################] 100%
(1/1) checking for file conflicts [#####################################################################################################################] 100%
(1/1) checking available disk space [#####################################################################################################################] 100%
(1/1) reinstalling open-vm-tools-dkms [#####################################################################################################################] 100%
>>> Enable building of open-vm-tools modules:
>>> $ dkms add open-vm-tools/2013.09.16
>>>
#[root@localhost] - [14-01-01 18:10:14] - [/home/toxicarrow/Documents/firewall] - [R:0]
dkms install -m open-vm-tools -v 2013.04.16 -k $(uname -r)
Error! Could not find module source directory.
Directory: /usr/src/open-vm-tools-2013.04.16 does not exist.
#[root@localhost] - [14-01-01 18:13:14] - [/home/toxicarrow/Documents/firewall] - [R:2]
dkms install -m open-vm-tools -v 2013.09.16 -k $(uname -r)
Kernel preparation unnecessary for this kernel. Skipping...
Building module:
cleaning build area....
make KERNELRELEASE=3.12.6-1-ARCH VM_UNAME=3.12.6-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmblock; make VM_UNAME=3.12.6-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmci; make VM_UNAME=3.12.6-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmhgfs; make VM_UNAME=3.12.6-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmsync; make VM_UNAME=3.12.6-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmxnet; make VM_UNAME=3.12.6-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vsock........
Error! Build of vmblock.ko failed for: 3.12.6-1-ARCH (x86_64)
Consult the make.log in the build directory
/var/lib/dkms/open-vm-tools/2013.09.16/build/ for more information.
#[root@localhost] - [14-01-01 18:13:45] - [/home/toxicarrow/Documents/firewall] - [R:7]
Official Tools
Before patches
#[root@localhost] - [14-01-02 2:40:49] - [/home/toxicarrow/vmware/vmware-tools-distrib] - [R:32]
./vmware-install.pl
A previous installation of VMware Tools has been detected.
The previous installation was made by the tar installer (version 4).
Keeping the tar4 installer database format.
You have a version of VMware Tools installed. Continuing this install will
first uninstall the currently installed version. Do you wish to continue?
(yes/no) [yes]
Uninstalling the tar installation of VMware Tools.
Stopping services for VMware Tools
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: done
Unmounting HGFS shares: done
Guest filesystem driver: done
VM communication interface socket family: done
VM communication interface: done
Stopping Thinprint services in the virtual machine:
Stopping Virtual Printing daemon: done
The removal of VMware Tools 9.6.1 build-1378637 for Linux completed
successfully.
Installing VMware Tools.
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc/init.d]
What is the directory that contains the init scripts?
[/etc/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
The path "/usr/lib/vmware-tools" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
The path "/usr/share/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]
The installation of VMware Tools 9.6.1 build-1378637 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]
Initializing...
Making sure services for VMware Tools are stopped.
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: done
Unmounting HGFS shares: done
Guest filesystem driver: done
VM communication interface socket family: done
VM communication interface: done
Stopping Thinprint services in the virtual machine:
Stopping Virtual Printing daemon: done
sh: : command not found
sh: : command not found
Before you can compile modules, you need to have the following installed...
make
gcc
kernel headers of the running kernel
Searching for GCC...
Detected GCC binary at "/bin/gcc".
The path "/bin/gcc" appears to be a valid path to the gcc binary.
Would you like to change it? [no]
Searching for a valid kernel header path...
Detected the kernel headers at "/lib/modules/3.12.6-1-ARCH/build/include".
The path "/lib/modules/3.12.6-1-ARCH/build/include" appears to be a valid path
to the 3.12.6-1-ARCH kernel headers.
Would you like to change it? [no]
make: Entering directory '/tmp/modconfig-lyoMIO/vmci-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-lyoMIO/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/driverLog.o
LD [M] /tmp/modconfig-lyoMIO/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-lyoMIO/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-lyoMIO/vmci-only/vmci.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-lyoMIO/vmci-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-lyoMIO/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory '/tmp/modconfig-lyoMIO/vmci-only'
make: Entering directory '/tmp/modconfig-VlEWPD/vmci-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-VlEWPD/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/driverLog.o
LD [M] /tmp/modconfig-VlEWPD/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-VlEWPD/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-VlEWPD/vmci-only/vmci.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-VlEWPD/vmci-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-VlEWPD/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory '/tmp/modconfig-VlEWPD/vmci-only'
make: Entering directory '/tmp/modconfig-VlEWPD/vsock-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-VlEWPD/vsock-only/linux/af_vsock.o
CC [M] /tmp/modconfig-VlEWPD/vsock-only/linux/vsockAddr.o
CC [M] /tmp/modconfig-VlEWPD/vsock-only/linux/notifyQState.o
CC [M] /tmp/modconfig-VlEWPD/vsock-only/linux/util.o
CC [M] /tmp/modconfig-VlEWPD/vsock-only/linux/stats.o
CC [M] /tmp/modconfig-VlEWPD/vsock-only/linux/notify.o
CC [M] /tmp/modconfig-VlEWPD/vsock-only/driverLog.o
LD [M] /tmp/modconfig-VlEWPD/vsock-only/vsock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-VlEWPD/vsock-only/vsock.mod.o
LD [M] /tmp/modconfig-VlEWPD/vsock-only/vsock.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-VlEWPD/vsock-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-VlEWPD/vsock-only'
cp -f vsock.ko ./../vsock.o
make: Leaving directory '/tmp/modconfig-VlEWPD/vsock-only'
The module vmxnet3 from this package is not supported for kernels >= 3.10.
Please enable this module in your kernel. You may also have to enable
HYPERVISOR_GUEST.
The module pvscsi from this package is not supported for kernels >= 3.10.
Please enable this module in your kernel. You may also have to enable
HYPERVISOR_GUEST.
The module vmmemctl from this package is not supported for kernels >= 3.10.
Please enable this module in your kernel. You may also have to enable
HYPERVISOR_GUEST.
The VMware Host-Guest Filesystem allows for shared folders between the host OS
and the guest OS in a Fusion or Workstation virtual environment. Do you wish
to enable this feature? [yes]
make: Entering directory '/tmp/modconfig-C1YUSD/vmci-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-C1YUSD/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/driverLog.o
LD [M] /tmp/modconfig-C1YUSD/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-C1YUSD/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-C1YUSD/vmci-only/vmci.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-C1YUSD/vmci-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-C1YUSD/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory '/tmp/modconfig-C1YUSD/vmci-only'
make: Entering directory '/tmp/modconfig-C1YUSD/vmhgfs-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/message.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/rpcout.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/hgfsUtil.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/cpName.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/request.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/stubs.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/link.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/bdhandler.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/transport.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/module.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/file.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/super.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/vmci.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/dir.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/fsutil.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/hgfsBd.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/filesystem.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/page.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/backdoorGcc64.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/backdoor.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/hgfsEscape.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/inode.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/dentry.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/cpNameLite.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/kernelStubsLinux.o
LD [M] /tmp/modconfig-C1YUSD/vmhgfs-only/vmhgfs.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-C1YUSD/vmhgfs-only/vmhgfs.mod.o
LD [M] /tmp/modconfig-C1YUSD/vmhgfs-only/vmhgfs.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-C1YUSD/vmhgfs-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-C1YUSD/vmhgfs-only'
cp -f vmhgfs.ko ./../vmhgfs.o
make: Leaving directory '/tmp/modconfig-C1YUSD/vmhgfs-only'
The vmxnet driver is no longer supported on kernels 3.3 and greater. Please
upgrade to a newer virtual NIC. (e.g., vmxnet3 or e1000e)
The vmblock enables dragging or copying files between host and guest in a
Fusion or Workstation virtual environment. Do you wish to enable this feature?
[yes]
NOTICE: It appears your system does not have the required fuse packages
installed. The VMware blocking filesystem requires the fuse packages and its
libraries to function properly. Please install the fuse or fuse-utils package
using your systems package management utility and re-run this script in order
to enable the VMware blocking filesystem.
VMware automatic kernel modules enables automatic building and installation of
VMware kernel modules at boot that are not already present. This feature can be
enabled/disabled by re-running vmware-config-tools.pl.
Would you like to enable VMware automatic kernel modules?
[no]
Detected X server version 1.14.5
Distribution provided drivers for Xorg X server are used.
Skipping X configuration because X drivers are not included.
Warning: This script could not find mkinitrd or update-initramfs and cannot
remake the initrd file!
Checking acpi hot plug done
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: done
VM communication interface: done
VM communication interface socket family: failed
Guest filesystem driver: failed
Mounting HGFS shares: failed
VMware User Agent: done
Guest operating system daemon: done
Unable to start services for VMware Tools
Execution aborted.
After patches
#[root@localhost] - [14-01-02 2:44:39] - [/home/toxicarrow/vmware] - [R:0]
git clone https://github.com/rasa/vmware-tools-patches.git
Cloning into 'vmware-tools-patches'...
remote: Reusing existing pack: 134, done.
remote: Total 134 (delta 0), reused 0 (delta 0)
Receiving objects: 100% (134/134), 22.06 KiB | 0 bytes/s, done.
Resolving deltas: 100% (74/74), done.
Checking connectivity... done.
#[root@localhost] - [14-01-02 2:44:55] - [/home/toxicarrow/vmware] - [R:0]
ls
= VMwareTools-9.6.1-1378637.tar.gz manifest.txt* run_upgrader.sh vmware-tools-distrib/ vmware-tools-patches/ vmware-tools-upgrader-32* vmware-tools-upgrader-64*
#[root@localhost] - [14-01-02 2:44:57] - [/home/toxicarrow/vmware] - [R:0]
cp VMwareTools-9.6.1-1378637.tar.gz vmware-tools-patches
#[root@localhost] - [14-01-02 2:45:13] - [/home/toxicarrow/vmware] - [R:0]
cd vmware-tools-patches
#[root@localhost] - [14-01-02 2:45:17] - [/home/toxicarrow/vmware/vmware-tools-patches] - [R:0]
ls
LICENSE VMwareTools-9.6.1-1378637.tar.gz patch-module.sh* patches/ untar-and-patch-and-compile.sh*
README.md download-patches.sh* patch-modules.sh* untar-all-and-patch.sh* untar-and-patch.sh*
#[root@localhost] - [14-01-02 2:45:18] - [/home/toxicarrow/vmware/vmware-tools-patches] - [R:0]
./untar-and-patch-and-compile.sh
=== Patching ./VMwareTools-9.6.1-1378637.tar.gz ...
--- Applying vmci/vmware9.k3.8rc4.patch ...
patching file linux/driver.c
Hunk #1 FAILED at 124.
Hunk #2 FAILED at 1750.
Hunk #3 FAILED at 1978.
3 out of 3 hunks FAILED -- saving rejects to file linux/driver.c.rej
--- Applying vmhgfs/vmhgfs-uid-gid-kernel-3.12-tools-9.6.1.patch ...
patching file file.c
patching file filesystem.c
patching file fsutil.c
patching file inode.c
Hunk #1 succeeded at 514 (offset -3 lines).
Hunk #2 succeeded at 617 (offset -3 lines).
Hunk #3 succeeded at 1216 (offset -3 lines).
patching file shared/compat_cred.h
--- Applying vmhgfs/vmhgfs-d_count-kernel-3.11-tools-9.6.0.patch ...
patching file inode.c
Hunk #1 succeeded at 31 with fuzz 1.
Hunk #2 FAILED at 1893.
Hunk #3 FAILED at 1946.
2 out of 3 hunks FAILED -- saving rejects to file inode.c.rej
--- Applying vmhgfs/vmware9.compat_mm.patch ...
patching file shared/compat_mm.h
Hunk #1 FAILED at 91.
Hunk #2 FAILED at 100.
2 out of 2 hunks FAILED -- saving rejects to file shared/compat_mm.h.rej
--- Applying vmhgfs/patch_inode.c.patch ...
patching file inode.c
Hunk #1 FAILED at 1798.
Hunk #2 FAILED at 1818.
2 out of 2 hunks FAILED -- saving rejects to file inode.c.rej
--- Applying vmblock/vmblock.3.11.patch ...
patching file linux/file.c
--- Applying vmblock/vmblock.3.10.patch ...
patching file linux/control.c
Creating a new VMware Tools installer database using the tar4 format.
Installing VMware Tools.
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc/init.d]
What is the directory that contains the init scripts?
[/etc/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
The path "/usr/lib/vmware-tools" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
The path "/usr/share/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]
The installation of VMware Tools 9.6.1 build-1378637 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]
Initializing...
Making sure services for VMware Tools are stopped.
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: done
Unmounting HGFS shares: done
Guest filesystem driver: done
Stopping Thinprint services in the virtual machine:
Stopping Virtual Printing daemon: done
sh: : command not found
sh: : command not found
make: Entering directory '/tmp/modconfig-HrsGw6/vmci-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-HrsGw6/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/driverLog.o
LD [M] /tmp/modconfig-HrsGw6/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-HrsGw6/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-HrsGw6/vmci-only/vmci.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-HrsGw6/vmci-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-HrsGw6/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory '/tmp/modconfig-HrsGw6/vmci-only'
make: Entering directory '/tmp/modconfig-pVUBEq/vmci-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-pVUBEq/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/driverLog.o
LD [M] /tmp/modconfig-pVUBEq/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-pVUBEq/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-pVUBEq/vmci-only/vmci.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-pVUBEq/vmci-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-pVUBEq/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory '/tmp/modconfig-pVUBEq/vmci-only'
make: Entering directory '/tmp/modconfig-pVUBEq/vsock-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-pVUBEq/vsock-only/linux/af_vsock.o
CC [M] /tmp/modconfig-pVUBEq/vsock-only/linux/vsockAddr.o
CC [M] /tmp/modconfig-pVUBEq/vsock-only/linux/notifyQState.o
CC [M] /tmp/modconfig-pVUBEq/vsock-only/linux/util.o
CC [M] /tmp/modconfig-pVUBEq/vsock-only/linux/stats.o
CC [M] /tmp/modconfig-pVUBEq/vsock-only/linux/notify.o
CC [M] /tmp/modconfig-pVUBEq/vsock-only/driverLog.o
LD [M] /tmp/modconfig-pVUBEq/vsock-only/vsock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-pVUBEq/vsock-only/vsock.mod.o
LD [M] /tmp/modconfig-pVUBEq/vsock-only/vsock.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-pVUBEq/vsock-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-pVUBEq/vsock-only'
cp -f vsock.ko ./../vsock.o
make: Leaving directory '/tmp/modconfig-pVUBEq/vsock-only'
The module vmxnet3 from this package is not supported for kernels >= 3.10.
Please enable this module in your kernel. You may also have to enable
HYPERVISOR_GUEST.
The module pvscsi from this package is not supported for kernels >= 3.10.
Please enable this module in your kernel. You may also have to enable
HYPERVISOR_GUEST.
The module vmmemctl from this package is not supported for kernels >= 3.10.
Please enable this module in your kernel. You may also have to enable
HYPERVISOR_GUEST.
The VMware Host-Guest Filesystem allows for shared folders between the host OS
and the guest OS in a Fusion or Workstation virtual environment. Do you wish
to enable this feature? [yes]
make: Entering directory '/tmp/modconfig-ukgHfB/vmci-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-ukgHfB/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/driverLog.o
LD [M] /tmp/modconfig-ukgHfB/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-ukgHfB/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-ukgHfB/vmci-only/vmci.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-ukgHfB/vmci-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-ukgHfB/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory '/tmp/modconfig-ukgHfB/vmci-only'
make: Entering directory '/tmp/modconfig-ukgHfB/vmhgfs-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/backdoorGcc64.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/message.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/request.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/filesystem.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/cpName.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/dentry.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/rpcout.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/hgfsUtil.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/stubs.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/hgfsEscape.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/link.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/transport.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/module.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/file.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/super.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/vmci.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/bdhandler.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/dir.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/fsutil.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/hgfsBd.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/page.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/backdoor.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/inode.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/cpNameLite.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/kernelStubsLinux.o
LD [M] /tmp/modconfig-ukgHfB/vmhgfs-only/vmhgfs.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-ukgHfB/vmhgfs-only/vmhgfs.mod.o
LD [M] /tmp/modconfig-ukgHfB/vmhgfs-only/vmhgfs.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-ukgHfB/vmhgfs-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-ukgHfB/vmhgfs-only'
cp -f vmhgfs.ko ./../vmhgfs.o
make: Leaving directory '/tmp/modconfig-ukgHfB/vmhgfs-only'
The vmxnet driver is no longer supported on kernels 3.3 and greater. Please
upgrade to a newer virtual NIC. (e.g., vmxnet3 or e1000e)
The vmblock enables dragging or copying files between host and guest in a
Fusion or Workstation virtual environment. Do you wish to enable this feature?
[yes]
NOTICE: It appears your system does not have the required fuse packages
installed. The VMware blocking filesystem requires the fuse packages and its
libraries to function properly. Please install the fuse or fuse-utils package
using your systems package management utility and re-run this script in order
to enable the VMware blocking filesystem.
VMware automatic kernel modules enables automatic building and installation of
VMware kernel modules at boot that are not already present. This feature can be
enabled/disabled by re-running vmware-config-tools.pl.
Would you like to enable VMware automatic kernel modules?
[no]
Detected X server version 1.14.5
Distribution provided drivers for Xorg X server are used.
Skipping X configuration because X drivers are not included.
Warning: This script could not find mkinitrd or update-initramfs and cannot
remake the initrd file!
Checking acpi hot plug done
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: done
VM communication interface: done
VM communication interface socket family: failed
Guest filesystem driver: failed
Mounting HGFS shares: failed
Guest operating system daemon: done
Unable to start services for VMware Tools
Execution aborted.
#[root@localhost] - [14-01-02 2:46:53] - [/home/toxicarrow/vmware/vmware-tools-patches] - [R:0]
Any idea what I should be doing?I have the same problem on ESXI 5.5 for over a month now, tried the patches, tried the LTS kernel which others say results in an immediate result without patches, nothing seems to work and nobody seems to be able to offer a solution.
Did you make any progress ??
Error! Build of vmblock.ko failed for: 3.10.25-1-lts (x86_64)
Consult the make.log in the build directory
/var/lib/dkms/open-vm-tools/2013.09.16/build/ for more information.
make[2]: *** No rule to make target '/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock/linux/inode', needed by '/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock/vmblock.o'. Stop.
Makefile:1224: recipe for target '_module_/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock' failed
make[1]: *** [_module_/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock] Error 2
make[1]: Leaving directory '/usr/src/linux-3.10.25-1-lts'
Makefile:120: recipe for target 'vmblock.ko' failed
Last edited by crankshaft (2014-01-10 11:32:32) -
Error While running Installer to upgrade to 9.2.0.4
Hello,
I was trying to upgrade my database 9.2.0.1 to 9.2.0.4.
Following up the article "Oracle9i Database Patch Set Notes Release 9.2.0.4"
When I try to run the Installer for the Patch set, I receive this error:
Initializing Java Virtual Machine from /u01/oracle/Disk1/./stage/Components/oracle.swd.jre/1.3.1.0.0a/1/DataFiles/Expanded/jre/aix/jre/bin/java. Please wait...
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using '2.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:77)
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java:142)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:72)
at java.awt.Window.<init>(Window.java:202)
at java.awt.Window.<init>(Window.java:244)
at java.awt.Frame.<init>(Frame.java:329)
at java.awt.Frame.<init>(Frame.java:276)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:593)
Although I exported the display to number 2 : #export DISPLAY=2
and googling for a possible solution, I did the following with no luck:
$DISPLAY=:2.0
$ export DISPLAY
$ xhost +
I am using the cygwin to get to the GUI of the operating system.
Any help?
Thank you.Hello Srini,
Thank you for your reply. I ran the installer located in /u01/oracle/oui/install and pressed the 'About Oracle Universal Installer' and the version of the oui was 9.2.0.4
I then clicked on the Installed products, it took like for ever to execute, so I ran the sqlplus.
When I connencted to the sqlplus, I saw that the database is still 9.2.0.1
So I continued to installation procedure marked on "Oracle9i Database Patch Set Notes Release 9.2.0.4" document.
after installing the new oui, I should execute the $ORACLE_HOME/root.sh in a root session. I did and I suppose to see the installer window and go through with the wizard but the cursor just returns.
Is there any thing wrong with my installation procedure, although I followed the steps mentioned in the document step by step.
kinldy advice.
Regards, -
Hi,
I'm trying to install Oracle 8.1.5 (EE) on Red Hat 6.1. Everything goes fine until I get the message:
Summary Oracle8i Enetrprise Edition 8.1.5:
Space requirements
Volume / Required 444 MB: Available not available.
But I have 3GB free space.........
Please help.
//PatrikI have carried out the instructions as detailed, I then run the dbassist $ and get the documented error, continuing I choose custom and define my database. Once complete I choose to create the script rather than run the "Create Database" directly. Once complete I then run the SQL script to find out that Oracle is not loaded, looking at the first script that it tries to run I notice that the original error that I get is a shared segment error... Any Thoughts??
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
Ignore it. There are some other quircks to it. Namely:
1) Select oinstall as the group to own the Oracle software. After entering
this you will be prompted to run the /tmp/orainstall/oraInstall.sh as root.
Please make sure you run this as root before proceeding.
% cd /tmp/orainstall
% ./oraInstall.sh
2) When you reach the "Installation Types" window, you must select Custom.
3) When you reach the "Available Product Components" window, you can select
everything. Do NOT de-select intermedia.
5) You will asked whether you wish to create a database as part of the
installation. Regardless of your answer, the installer will start the
Database Configuration Assistant (dbassist) and attempt to create a
database at the end of the install.
6) When dbassist runs at the end of the install, the following error is
displayed "JNLS Exception: oracle.ntp.jnls.JNLSException Unable to find any
National Character Sets. Please check your Oracle installation."
This is a known problem <bug:884001>. Ignore the warning.
7) When database assistant starts, select cancel to exit. You should not
attempt to create a database before applying the 8.1.5.0.2 patch set.
8) When you exit the database assistant, you will go back into the Oracle
Universal Installer to complete the installation. Exit the installer at
this point.
Now you are out of the installer, there are some additional tasks to
perform. The file permissions on lsnrctl and several other executables will be
incorrect (despite the fact you ran $ORACLE_HOME/root.sh at the appropriate time). To
fix this do the following:
$ cd $ORACLE_HOME/install/utl
$ ./linux.sh
This will recompile and fix the permissions problems.
Now you need to apply the 8.1.5.0.2 patch set. Extract the file you
downloaded into a suitable directory.
$ tar xvfz linux_815patches.tgz
$ cd linux_815patches
$ ./linux_815patches.sh
This will apply the patches. Check the log files in /tmp for any errors.<HR></BLOCKQUOTE>
null -
Oracle 10g installation on aix 52
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/crsctl.bin because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/clscfg because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
Failed to initialize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated.Would like to see the http://download-west.oracle.com/docs/cd/B19306_01/relnotes.102/b19074/toc.htm#CJAFJGIC or for linux, see http://www.puschitz.com/InstallingOracle10g.shtml.
Its trustworthy sites and my request is to delete all the files and start clean-installation again.
Revert back if any clarifications required.
Regards,
Star Nirav
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program
/dbms/oracle/10g/OraHome/bin/crsctl.bin because of
the following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
Cannot load program
/dbms/oracle/10g/OraHome/bin/clscfg because of the
following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
lize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated. -
Problem in creating database after installion oracle on AIX6.1
Hi.
I have to install oracle 10g on AIX 6.1 silently so i have followed the the below steps:
1. downloaded patch 6613550 and run ./rootpre.sh of that patch as root user
2. created required oracle user and groups ( oracle and dba respectively)
3. installed 10.2.0.1 version by using the following command :
su - oracle -c "/Disk1/runInstaller -ignoreSysPrereqs -silent -responseFile /enterprise.rsp"
4. run oraInventory/orainstRoot.sh
5. run $ORACLE_HOME/root.sh
6. installed oracle 10.2.0.3 patchset using the command :
su - oracle -c "/p10_10203_AIX64-5L/Disk1/runInstaller -ignoreSysPrereqs -silent -force -debug \
FROM_LOCATION="/p10_10203_AIX64-5L/Disk1/stage/products.xml" \
ORACLE_HOME="given $ORACLE_HOME value" \
ORACLE_HOME_NAME="OraDb10g" \
TOPLEVEL_COMPONENT='{"oracle.patchset.db","10.2.0.3.0"}'"2>&1
7. then i am Configuring oracle to startup automatically
8. creating a database using the following command :
su - oracle -c "$ORACLE_HOME/bin/dbca -silent -createDatabase -templateName General_Purpose.dbc -gdbname tc -passwordDialog false -sysPassword sys_password -listeners LISTENER"
but when i execute this command it hangs .. doesn't show any error messages. nothing else..
could any one please help me with that.. where i went wrong..
Note : I have used the same command for creating a database for AIX 5.3 and i worked... but i didn't installed and patchset 6613550 and 10.2.0.3 as 10.2.0.1 is certified with AIX 5.3
please help me .. its urgentdear friend
thans for replying
in fact i ddi not work
i did the following:
1 CREATE OR REPLACE TRIGGER t_CREATE_SYN
2 AFTER CREATE ON SCHEMA
3 BEGIN
4 DECLARE
5 vCUR INTEGER;
6 vEXE NUMBER;
7 CURSOR TAB_CUR IS
8 SELECT TABLE_NAME FROM USER_TABLES;
9 BEGIN
10 vCUR := DBMS_SQL.OPEN_CURSOR;
11 FOR I IN TAB_CUR LOOP
12 DBMS_SQL.PARSE (vCUR,'CREATE PUBLIC SYNONYM '||' '||I.TABLE_NAME||' '||' FOR '||' '||' '||user||'.'||i.table_name,DBMS_SQL.NATIVE);
13 vEXE := DBMS_SQL.EXECUTE(vCUR);
14 END LOOP;
15 DBMS_SQL.CLOSE_CURSOR(vCUR);
16 END;
17 NULL;
18* END;
SQL> /
Trigger created.
SQL> CREATE TABLE TAR_TAB ( ID NUMBER);
CREATE TABLE TAR_TAB ( ID NUMBER)
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-30511: invalid DDL operation in system triggers
ORA-06512: at "SYS.DBMS_SYS_SQL", line 824
ORA-06512: at "SYS.DBMS_SQL", line 32
ORA-06512: at line 10
i woder is it possible to write a DDL command in database trigger?
and how can i achive my task -
Not able to create database silently
Hi.
I have to install oracle 10g on AIX 6.1 silently so i have followed the the below steps:
1. downloaded patch 6613550 and run ./rootpre.sh of that patch as root user
2. created required oracle user and groups ( oracle and dba respectively)
3. installed 10.2.0.1 version by using the following command :
su - oracle -c "/Disk1/runInstaller -ignoreSysPrereqs -silent -responseFile /enterprise.rsp"
4. run oraInventory/orainstRoot.sh
5. run $ORACLE_HOME/root.sh
6. installed oracle 10.2.0.3 patchset using the command :
su - oracle -c "/p10_10203_AIX64-5L/Disk1/runInstaller -ignoreSysPrereqs -silent -force -debug \
FROM_LOCATION="/p10_10203_AIX64-5L/Disk1/stage/products.xml" \
ORACLE_HOME="given $ORACLE_HOME value" \
ORACLE_HOME_NAME="OraDb10g" \
TOPLEVEL_COMPONENT='{"oracle.patchset.db","10.2.0.3.0"}'"2>&1
7. then i am Configuring oracle to startup automatically
8. creating a database using the following command :
su - oracle -c "$ORACLE_HOME/bin/dbca -silent -createDatabase -templateName General_Purpose.dbc -gdbname tc -passwordDialog false -sysPassword sys_password -listeners LISTENER"
but when i execute this command it hangs .. doesn't show any error messages. nothing else..
could any one please help me with that.. where i went wrong..
Note : I have used the same command for creating a database for AIX 5.3 and i worked... but i didn't installed and patchset 6613550 and 10.2.0.3 as 10.2.0.1 is certified with AIX 5.3
thanks in advanceHi
oh.. sorry.. i am putting it there.Dont be sorry ;) i hope u got your answer soon,please close thread (change thread status to answered so it pretend to lose time of other forums user while they are searching open question which is not answered)
Regard
Helios -
Oracle 9.2 Installation Guide; User question
Hi,
i want to install Oracle 9.2 on SuSE Linux 9.3 professional. Beacuase
of that i read Ivan Kartik's Installation Guide. But i don't understand the
first step. I create an oracle user, but how can i log in as the oracle
user?
Because whenever i try to install oracle as the standard user (not the root)
i get the error that i don't have the specific permissions to install the
configuration assistant.
Can somebody help me, please??
Thank you
DanielHello.
You don't need contact me because I'm checking this section every day.
Installtion of Oracle SW is performed under non privileged user (usually oracle).
Of course there are some steps which could be done with super user rights only.
As far I know there are three steps which must be done by root:
1. create oracle user (dba group)
2. execute the /tmp/OrainstRoot.sh script
3. execute $ORACLE_HOME/root.sh after installation
4. (optional) install new JRE (as desribed in my article)
If you don't have root acount there must be a person responsible for OS (System administrator - SA) with the root account. So when you need to perform som of above steps contant your SA.
I can see (from your post) that you have root account.
I create an oracle user, but how can i log in as the oracle user?Example:
Assume that you are logged as root (or other user). In this case use following command:
su - oracle
Because whenever i try to install oracle as the standard user (not the root)
i get the error that i don't have the specific permissions to install the
configuration assistant.1. You could use other shell (terminal) where you will be logged as root to perform steps under privilegged user
2. or when "su - oracle" was used then simply exit current session by "exit" command.
3. you could login as root when you execute su - command. -
Grid Infrastructure installable for Oracle Restart only (No ASM)?
Hello,
Can Oracle Grid Infrastructure be installed for its Oracle Restart functionality only? i.e., No ASM,; this box uses local RAID 5 filesystems only.
This is a standalone 32-bit RHEL 5 system with Oracle Database 10gR2 already installed that I intend to upgrade to 11gR2. Just experimenting with installing Grid Infrastructure for only its restart capability. There isn't anything out there I've found that addresses this other than the Oracle doc stating that the Infrastructure must be installed if I want to use ASM or Oracle Restart.
I'm currently in the installer in a Software Only installation waiting for my SysAdmin to run the root.sh script, but in looking at this script, it looks like it might try to do things with CRS, voting files and the like, which do not exist.
Thank you!
-JonHi Erik,
Can Oracle Grid Infrastructure be installed for its Oracle Restart functionality only? Yes ... you can do that installing Software Only
I'm currently in the installer in a Software Only installation waiting for my SysAdmin to run the root.sh script, but in looking at this script, it looks like it might try to do things with CRS, voting files and the like, which do not exist.Don't worry about that ... at the end of the execution of the root.sh script will report a proceedings to configure only Oracle Restart.
Only this resource "ora.evmd" will appear online.
Regards,
Levi Pereira
Maybe you are looking for
-
Can anyone help me with a 3 week old Infinity Conn...
Hi Let me get it out there, I'm bored of BT, I'm bored of BT India and I'm bored of customer services moving you round to someone else and lying to you about what they said. You find someone who says they want to help, then you call them back and th
-
Transfer videos from IPhone 3GS to a Mac
I cannot figure how to transfer videos taken on my IPhone to my Mac. Anyone?
-
We are using Adobe Acrobat 8 Professional in our offices. But we are unable images in the pdf files. For example: http://www.europacmetrology.co.uk/uploads/StingerFlyer2.pdf The two images in the middle of this first page and seconds are darkened gra
-
Am I missing something in the recommended list?
I followed the recommendation in the doc-7311. I add the word content after the link. I click on discussions. I am missing the original posters name and the last posters name. If the discussion has not been answered, and the original poster was also
-
PDW connection manager and Windows authentication
I'm new to SSIS 2012, but I've got the SSDT BI 2012 (x86) installed. I'm also connecting to a SQL Server 2012 Parallel Data Warehouse. I've been able to connect to it via SQL Server Object Explorer with Windows Authentication. No worries. However, in