Exemptions in Infotype 0580 not considered in Income Tax Calculation

Dear All,
The following fields or options are displayed, when we execute the infotype 00580 i.e. Previous Employment Tax details.
1]Salary as per provisions u/s 17(1)
2]Value of perquisites u/s 17(2)
3]Profits in lieu of salary u/s 17(3)
4]Exemptions u/s 10
5]Professional Tax
6]Provident Fund
7]Income Tax Deducted
8]Surcharge Deducted
9]Education Cess Deducted
10]Medical Exemption
11]Leave Encashment Exemption Amount
12]Gratuity Exemption
13]VRS Exemption
14]Number of LTA Exempt
15]LTA Carried Forward*
I have entered amount in 1,2,4,5,6,7,8,11,12 & 13 and processed the payroll. The amounts entered in 11,12 & 13 are not being considered in Income Tax calculation while all other are considered.
Can anyone tell me what is the problem and what I have to do for those amounts to be considered for Income Tax calculation.
Regards
Sudhir Shrisunder

Hi Sudhir,
Can you check if following wage types are present in system by processing of INPET-
Leave Encashment Exemtwage type (/4V7) - This wage type stores the amount entered as the sum of all leave encashment exemptions availed. It gets processed only on the event of the separation of the employee from your organisation. The value of this wage type gets deducted from the maximum exemption limit for leave encashment exemption
Gratuity Exemptionwage type (/4V8) - This wage type stores the amount entered as the total gratuity availed. It gets processed only on the event of the separation of the employee from your organisation. The value of this wage type gets deducted from the maximum exemption limit for gratuity exemption amount.
VRS Exemption wage type (/4V9) - This wage type stores the amount entered as the Voluntary Retirement Scheme (VRS) exemption amount availed. VRS Exemption wage type (/4V9) gets processed only on the event of the separation of the employee from your organisation. No tax exemption is given, in case the employee has availed of the same with any of the previous employers
If these wage types are present then calculation is correct.
Plz note that the value of these wage type get deducted from the maximum exemption limit of the corresponding exemption amounts. Exemption has already compared been considered for them and tax component were computed correspondingly.
Let me know if stll not clear.
Regards,
Praveen

Similar Messages

Income Tax Calculations 2008

Hi Friends,
I have a Issue in Income Tax calculation,
for the month of September, the form 16 for a particular employee is a follows
Form 16 summary
Gross Salary                   783,399.00
Exemption U/S 10                 5,600.00
Balance                        777,799.00
Empmnt tax (Prof Tax)            1,125.00
Aggrg Deduction                  1,125.00
Incm under Hd Salary           776,674.00
Gross Tot Income               725,513.00
Agg of Chapter VI              106,008.00
Total Income                   619,510.00
Tax on total Income             90,853.00
Tax payable and surcharg        93,579.00
Tax deducted so far             24,100.00
Income Tax                       9,926.00
Now i have added a wage Type called Special pay -Rs.100000 in IT 15, eventhough this amount is reflecting in monthly gross salary and RT table, this amount is not considered for Income tax . I.e with or without Wage type Special pay, The gross salary considred for Income Tax is 783399(without any change). Why it is so.
Rgds,
Sekar.

Hi Sekar,
Make sure that you have assigned the right processing and cumulation classes to your wage type in table V_512W_D
Make sure that in table V_512W_D cumulation class 1 is ticked for this wagetype.
Warm Regards,
Kapil Kaushal

Income tax calculation

Dear All,
Presently In payroll system income tax calculation is based on allowance paid basis. but our client is required that is projected bais. for example
presently if am paying bonus through info type 15 rs 100,000 then system is deducting tax from remaining month in equal installment but client is required that it has to be deducted one time at this month.
please help me
BMS

Dear All,
I read the attached document in sap note i.e.1024284 in this sap note attached document is Guideline.pdf in this document they have clearly mention that ....
Introduction
There may be a need to apply flat tax rate on irregular payments for a particular month. If
they are required to be taxed separately it is not possible to do in the regular payroll run
in the system currently. Currently the system supports TDS at different rate on these
payments through offcycle payroll run. This document explains how this can be achieved
during regular run.
It means if we applied this note then system will deduct flat % on bonus amount if i am wrong please tell me the fact
BMS

Income Tax Calculation problem: Urgent Help Needed

Dear Gurus,
I am facing a unique problem. Our client has two incentives
1) Product Incentive
2) Sales Incentive
Every month incentive figures get changed. These two are Monthly Regular Income (Cumulations Class 24) i.e. included in annual tax calculation.
Now for tax calculation, my client wants "Actual Earning" and "Estimated Earning for the rest of the year" to be different. But Income tax calculation in SAP (for the month of April 2007) takes Actual Earning and multiplied it by 12( i.e. 11+1) to calculate Estimated Earning. But my client wants this Estimated Earning to be different.
Now please let me know is this possible in SAP system and how to calculate this?
Your help will be highly appreciated
Waiting for an early reply.
Thanking You,
With Best Regards,
Pratik

Hi,
I am not understand your problem give your mb then i talk to you
mhpo

Income Tax Calculations - Issue

Client is saying that as per their existing SAP system, the Income tax calculation is made on Gross salary. And they are saying that if any additional taxable payout is made in a month to an employee, then the total tax on this additional payout should be paid by the employee in the same month. So basically his total tax would be the (general regular monthly tax + total tax on the additional payment), which as per them the system is not calculating correctly since October 2010.

Hi,
Thanks for your reply Jurgen & Remi. I am pretty new to Payroll & this is India Payroll.
Now, the issue is how should I proceed ahead.
1. The client says that the wage types are already configured in the system in such way that on certain wage types, the tax which is calculated is paid in the same month. Can u pls inform that which processing class & cumulation class do I need to check in Table 512w_d for this wage type.
2. As I need to see this whole functioning in Schema, pls guide as to where I should check this whole tax calculation in Schema.
3. The function I have heard which is used is India for Income tax is INTAX.
Looking forward to your reply.
Thanks a lot!!!
Edited by: SAP ST on Nov 25, 2010 7:24 PM

Income Tax Calculations

Hi Folks
My Project is going Live on July 2006. Regarding Income tax i would like to upload all the Master data and Salary data effective 1-Apr-06 and would like to run the payroll manually for three months(April, May and June)by changing the Control Record.
I do not want to go for mid year Go-Live.
If i run Payroll Manually for three months manually the Income Tax is getting calculated from April itself where in Actual go live is only from July and i would like to deduct the system for Income Tax from July only.
How to make the system to calculate Income Tax only from July when i run Payroll manually from April.
Appreciate any help or Any other idea to make the system to work fine.
Regards
Ragavan

Hi,
Sorry for the delayed response. I just got into the group and saw your message. Hope your Go-Live was smooth and successful. One way to address the issue is to have an adjustment figure (either as a payment or deduction) and balance the income tax deducted so far and give the provision for calculations from July onwards.
Would appreciate if you can share how you went about it.
Thanks
Pradeep

Income tax calculation error

Dear All
for an Employee , his total taxable income is Rs 2,65,395 pe annum
so per month it would be Rs 22116.
But it is showing income tax for april month as Rs 44,210.
His PAN is also being maintained.
Kindly guide me in resolving this issue.
Regards
Vish

Hi Vishwesh,
Many a times the scenario is seen.
It is not necessary that if Total TAXABLE INCOME = X
Then Tax per month is X/12.
In the month of April, there must be an allowance that makes the tax more for this person.
Please check the RT well.
If u do not find any extra amount in RT then check for PAN Number entries , has it been manintained from day 1 and what rate is it calculating.
Regards,
Prabha

Income tax calculation for Payroll India

Hi guys,
I want to know how the wage type /436 (Tax on Total) is generating.
For example the total Income of an employee i.e. /434 is 417,480 for the month May 2007. I understood, how /434 is generating. But I am not realising how /436 (Rs. 74,244) is generating.
The slab is as per the FY 2007
110,000.00----
0.00 INR
150,000.00----
10.00INR
250,000.00----
20.00INR
99,999,999.00----30.00INR
Can any body explain me. I am waiting for your valuable reply.
Regards
Prasad

Hi Prasad,
Have you found any answer for /436.
Now am also is same position " HOW /436 IS CALCULATING" my client also want to see the TAX complete calculation.
PLEASE FRIENDS, help me out, ITS VERY URGENT in my UAT presentation.
Now again am starting this thread, Who ever gives required output they can awared their points.
Kind Regards,
Saisree.S

List of emp for whom rebate is not considered in pay roll

hi experts,
can any one help me to get the list of employees for whom rebate is not considered for income tax calculation in pay roll run.
its urgent.
thanks in advance
shiva

As suggested try with wage type reporter identify the wage type for rebate and execute it for all employee so that you will get information for whom it is considered.
Regards
Venkatesh

Issue in income tax computation

Dear All,
I have some issue in income tax calculation India Payroll for few employees.
Listed the problems below
1. Exemption Under Section 10 is not considered during Income tax calculation
2. Medi-claim is not deducted from gross salary

Hi Lakshman,
Exemption under sec 10 should be considered in the tax calculation. In the Tax calculation all the amount u/s 10 will be stored in wage type /130 and it will subtracted from the Gross salary (/416).
If this is not happening then please check the configuration of the wage type which you are using.
Normally Medical exemption will be processed before the arrival of gross salary.
Hope this will help you.
Thanks & Regards
Saroj Hial

URGENT:Income Tax Problem in Payroll

Hi dear friends,
when India payroll is run the Conveyance Allowance is not considering for Income TAX Exemption.
I had assigned the TAX Code correctly with limit 800 per month.
When i check the technical Wage Type /130 ,it contains only HRA amount which is having tax exemption.
My conveyance allowance Wage type is in IT 0008.
I am struggling with this problem @ client location.
Please give a help by checking out this problem
<b>Wishing you all a Happy X-Mas and Prosperous New Year
Regards</b>

Hi Abhilash,
Please check the following tables.
1. V_T7INCA----
Conveyance Types.
2. V_T7INC9----
Conveyance Allowance Eligibility. Here You need to assign
                             Grouping for Allowances for each Conveyance Type and WT
                             for Conveyance.
3.V_T7INT9----
Taxability of Wage Types. Here You need to assign the
                         Conveyance WT to Taxcode SCNV with Exemption amount of
                         Rs 800 and Tax Type is 'Tax amount is Limit Based' and
                         frequency is 'Monthly'.
4 You have to maintain table V_T7INA9 with that WT.
Try with this.....
Good Luck
Laxmi

LTA Exemptions in Infotype 582

Hi All,
The LTA amount which need to be exempted is entered in Infotype 582 - LTA subtype. This is not taken for Income Tax taxable amount.
I need some help is understanding the technical internals like - what could make this LTA exemption component not getting participated in PA00_M40_CALC(payroll driver) though entered in 582 infotype. When checked in PC_Payresult - RT, the Annual Exemptions /133 is missing the LTA defined ???
Note: The same is not the case with Medical Exemption which is maintained in the same 582 infotype in - MDA subtype.
Thanks
Gopal

Nitin,
I have already mapped /3L1, /4E5 and 1503 WT to Tax Code SLTA - to try out... but still the LTA is not working fine. So all these entries are found in this T7INT9 table.
Note: I am maintaining Additional Payment(Infotype 15) for LTA re-imbursements and Exemptions(Infotype 582)maintained for Taxation.
I think I have missed out something which is causing this issue. But appreciate this forum members for rendering help to resolve this issue. This is my first SDN posting and its interesting to see the good inputs/solutions provided.
Thanks
Gopal

Sales Order is not consider for MRP in MRP Type PD and Strategy 40

Sales Order quantity is not consider for net requirement calculating in MRP.
My MRP Type is PD and Strategy 40.
Also in MD04 Sales order is not appearing.

Dear,
Requirements to MD04 will flow based on the settings you maintain in OVZ9 for the combination of "Availability Check" and "Checking Rule". Here whatever fields you choose under the tab "In/outward movements", that will be considered.
It may be because of Requirement type Missing at schedule line category level . In MD04 requirement are pass on Either Individually or collectively . In Case of Individual each schedule line create one entry in MD04 ( Stock Requirement list)
So check the materail master for checking group is maintain or not?
Please refer this thread also,
Re: Sale order not reflecting in MD04
After that run MRP again and check the result.
Regards,
R.Brahmankar

Income tax gross salary projection

Hi,
Income tax calculations upto Jan 2012, i.e 10th period gross salary calculations is calculating correctly, but the calculations for February 2012 shows the Gross salary only for three months ( i.e Jan 2012, feb 2012, Mar 2012).
Tax exemptions and all exemptions are taking the same.
Please help me in resolve this issue.
Regards,
Madhu

Hi Madhu,
Do you have any rehiring or company code change for the pernr? Please go through the explanation below:
/416 is calcualted with the following logic as mentioned:
/416 = /4VA + /4V1 + /4VJ + /4VK + /410/411/413-/414 + (S89-/616)
1. In normal cases, /410 is formed as follows:
/410 = /124 (CRT) + /124 (RT) + current /124 * projection factor
2. However, the logic does not remain same in case of company code changes. For company code changes scenarios, the calculation will happen as follows:
/410 = /124 (RT) + current /124 * projection factor.
/124 from CRT will not be considered in such a scenario. Instead once, /410 is formed and /416 is to be arrived, previous employment details would be considered (/4V* wagetypes).
Can you please review the SAP note 941288 projection of income,and check the settings as available in your system. Let me know if it still doesn't work.
Regards,
Nishtha

Income tax issue for mid month joinees

Issue 2:
For New (mid month) joinee at the first month gross salary is calculated based on the earned salary amount *12 months (or no. of remaining months for financial yr end), but in my client income tax deducted based on the actual salary (not earned salary) from the first month onwards.
For example :
Employee X,
Joined date 15.08.2011,
Actual salary = 1,00,000 INR. Earned salary for 15 days = 50,000 INR.
While Start Payroll for the period 5th (August) 2011. The WT /416 Gross salary = 4,00,000 (50000*8). Based on this gross salary income tax calculated, But I want to calculated the gross at first month (august 2011) based on follows,
Gross salary : August month earned salary = 50,000 + Actual salary per month =1,00,000*7 =7,00,000.
Gross salary = 7,50,000 INR.
Please give me some solution
Thanks and regards
Mohan .V

Hi Param Dayal,
New issues rise Now....
For New (mid month) joinee at the first month Exemption U/S 10 is calculated based on the Conveyance Allowance amount *12 months (or no. of remaining months for financial yr end), but in my client income tax Exemption U/S 10 based on the actual salary (not earned salary) from the first month onwards.
For example :
Employee X,
Joined date 15.08.2011,
Conveyance Allowance = 800 INR. Earned Conveyance Allowance for 15 days = 400 INR.
While Start Payroll for the period 5th (August) 2011. The WT /130 Exemption U/S 10 = 3,200 (400*8). Based on this Conveyance Allowance The Exemption U/S 10 calculated, But I want to calculated the Exemption U/S 10 at first month (august 2011) based on follows,
August month earned Conveyance Allowance = 400 INR + Actual Conveyance Allowance per month =800*7 =5,600.
Exemption U/S 10 = 6,000 INR.
Please give me some solution
Thanks and regards
Mohan .V
Edited by: mohantamilan on Sep 26, 2011 2:52 PM

Exemptions in Infotype 0580 not considered in Income Tax Calculation

Similar Messages

Maybe you are looking for