Existing Customized COPA characteristic to add check table

Hi,
I already have this customized COPA characteristic- tied to an operating concern. This COPA characteristic uses a customized data element.
Now I want to add a check table to it. I have already added a Value Table to the domain of the characteristic's data element. But in t-code: KEA5, the characteristic still does not show the check table under the 'Validation' section. Also in KEA5, it does not allow me to edit the characteristic.
Does anyone know how I can add the check table under the 'Validation' section in KEA5? Your help is very much appreciated!
Thank you.

Hello, I have to apply the scenario 3 of the sapnote 70623 also, but I am having problem when try to change the domain for the data element RKEG_WW403.. Object name RKEG_WW403 reserved for generated objects in package KEG0.
Object name RKEG_WW403 reserved for generated objects in package KEG0
Message no. TR247
Diagnosis
The object name belongs to a name range protected for generated objects.
This name is used by generation functions and is reserved for package KEG0.
Procedure
Create object:
Choose a different object name.
If you want to keep this object name for a particular reason, enter package KEG0. The object is automatically flagged as generated when it is created.
Change object:
To allow repairs, the object can be changed.
Thanks for your help!!!!

Similar Messages

How to add check tables or search helps to search help parameters?

Hello Forum!
I have made a Z-Search help, and I have a problem with some of my parameters.
The field (MARC)-EKGRP (Purchasing Group) has a check Table (T024) and the matching search help (H_T024).
I seem to find no possibility to add this check Table search help to my EKGRP parameter in my Z-Searc Help.
(Therefore, the End-User has to type it in Manually, there is no F4 funktionality...)
Is there a way to do this?
Thanx for replying!
Kind Regards,
Pieter
PS: I´m experiencing the same problems with other fields as well: to parameter (MARA-)MFRNR I would like to add the seach Help 'KRED', for it appears on my Z-Search Help. And so on....

Thanks, Archna Raja!
This is certainly the right direction to look for a solution.
However, i can not get it to work.
In debugger Mode I have populated the SHLP-FIELDDESCR field 4AVAILABL with X.
Result: The button for the search help appears. But when I click on it, nothing happens.
I than also tried this in combination with populating the fields:
REFTABLE
CHECKTABLE
No search Help window opened..
I did not find a fileld where I can indicate the Search help in the SHLP Structure.
Am I missing out on something?
Kind Regards,
Pieter
PS: I´m trying to get a search help for The filed EKGRP.
Check Table: T024 Serach Help: H_T024
Edited by: Pieter De Fré on Nov 30, 2010 11:38 AM

Mandatory field in COPA characteristic group not checked

Hello,
I have customized a COPA characteristic group in KEPA transaction entering the product as a mandatory characteristic.
Then I have posted a document in FBD9 taking a reference document that does nor have filled the product and the system does not show an error and the document is posted without the mandatory field.
How could I solve this problem?
Thank you very much
Regards

Hi
Did you assign this char group in KE4G against your Busn Trans or in KEVG2 against record type B?
If yes, and still it is not reading it, then refer note 115500.. you may need to apply this note
Regards
Ajay M

New ipad, existing customer - how much to add to plan?

Hi, I'm really interested in purchasing a new ipad with Verizon service - does anyone know how much this will cost per month? Also can you go month to month? I would prefer an annual contract but researching all prices. It's most likely the "user" and not the system ;) but I'm having a hard time navigating without having an ID for the ipad (haven't gotten it yet) - thanks!

I would be curious whether you have other lines with Verizon. If so, do you have a smartphone? Are you on the Share Everything plan? If you have a smartphone, would you be using the iPad when not near the smartphone.
I ask these questions because quite often a wifi only iPad would be sufficient. For the most part, I use my iPad when wifi is available. When wifi is not available, I provide data to my iPad via the included hotspot on my smartphone on my Share Everything plan. There is no monthly fee for my iPad, but if I had a cellular iPad, I would be paying $10/month for access.

COPA - How to add table when create new characteristic

Hi all,
I want to create new characteristic in COPA, that is batch (as currently, FG's price is manged by batch).
I find that this value is maintain in table VBRP. However, when I create new characteristic, I dont is this table in current list.
Please tell me how can I add this table ?
Step by step what I did is:
1.KEA5: create new characteristic
2. enter characteristic name
3. choose "transfer from SAP table"
4. because it doesnt have table VBRP in the this, so I type directly "Table Fields --> Table"
5. Systems show mesg "Enter valid reference table"
Please tell me how can I add this table ?

Hi Emily,
Pls check the SAP Note 111232 which gives similar solution that of you are looking for...
Follow the procedure...
Please create a characteristic by transferring it from table VBRP and
then change the automatically from system defined TKEZU entries like
the note 111232 explains.
The way to solve the problem would be to change the assignment
table TKEZU by exchanging VBRP with KOMP in the table name:
(1) Delete the following entry in table TKEZU (you can maintain TKEZU
with view V_TKEZU in transaction SM30):
Characteristic, B Tran, Table, Field name, Offset, Length
(2) Add the following entry to table TKEZU:
Characteristic, B Tran, Table, Field name, Offset, Length
XXXXX KEDR KOMP BWTAR
(3) Generate the environment of your operating concern.
Pls revert with result...
Srikanth Munnaluri

RSRV Check Check if characteristic values of text table exist in SID table

Hello Guys,
I have run the RSRV check Check if characteristic values of text table exist in SID table and I got a warning
when I check the Text table and compare it to attribute table, total entries in text table is more than entries in attribute table..
TEXT TABLE DONT HAVE ANY LANGUAGE...
is it possible that there are more entries in text rather than attributes... again THERE are no language..
Many Thanks

try to do a 'select * from table' and catch the
exception as it might fail if the table doesn't exist.Which might take quite a time if the table is big! If you really want to do that I'd use SELECT * FROM table WHERE 1=2
A better way is, to ask the DatabaseMetadata object to retrieve information about the table...
Thomas

COPA user-defined charact. w. own value maint. with existing check-table

Dear Experts,
I need to create a user-defined characteristic with own value maintenance with the pecularity that it needs to refer to the same check table as another user-defined characteristic with own value maintenance.
Could anybody explain me how I can do that?
Thanks in advance for your kind support.
Best Regards,
Eric

Hi Eric,
Generally when you are creating user defined charachteristic with own value maintainance check table is created by the system. So you requirement is not possible to achieve. As a workaounr you can create two char as you want and then copy the content of the first check table to the second one. This will have the same impact as what you have described.
Best Regards,
Abhisek Patnaik

Add new fields with EEW and assign a standard check table?

Hi,
I would like to add more language fields to a BP - Sold-to (Organization). As I see, one possibility is to use EEW.
Is it then possible to link this field to an existing check table in order to get the existing langauge codes by default?
Thanks in advance!
//a

Hi,
Actually i am working on the similar task. I added 2 custom fields in order item level using EEWB. I added the check table to my custom field but for some reason it wouldn't show up. So i added the values to the DOMAIN assigned to the custom field and the values showed up on the screen in the seatch help.
I am actually still trying to find other possibilities. I will let you know if i find any.
Hope this helps you,
Karuna.

Check table TFBEFU_CR: entry 10 does not exist

Dear all
When i am doing GR for Order (T.Code : MB31),the system displays the following message.
Check table TFBEFU_CR: entry 10 does not exist
plz give me the solution as early as possible,bcaz it is very urgent to me.
Thanks in advance.
Regards
Basava sreenu

Dear Mr.Basava,
I'm not sure,but try with this.
For the particular material which you are using in MB31 for Good's receipt for
Order,check whether the storage location is present in T code MMSC-Extend
material storage location.If not add and save,then try in MB31.
If useful reward points.
Regards
Mangal

Cannot add a new SHIP_TO address to a exist customer by using Interface

Hi,
I am encountered an error when i am using Customer Import Interface to add a new SHIP_TO address to a exist customer,
the template format of the Excel i used like below: <will insert to table: ra_customers_interface_all>
Customer Num. | Customer Name | Site Name | Address | Site Use Code | ... ...
1 | oracle | AA | address1 | BILL_TO |... ...
1 | oracle | AA | address1 | SHIP_TO |... ...
1 | oracle | AB | address2 | SHIP_TO |... ...
I am able to import top 2 rows correctly, as those 2 sites with same Site Name AA;one is BILL_TO site and another one is SHIP_TO address; I tested for few customers, it can run correncty if the BILL_TO address and SHIP_TO address are same.
But when running import for the third row to add another SHIP_TO address<AB&address2> to the exist customer<1&oracle>,the error raised, it gave error message like below:
The Customer Number has been used by another customer,import failed !
I am not too clear about this error,i just want to add a SHIP_TO address to the exist customer<1&oracle> and don't want to create a new customer.
what should i pay attention to? please give me some tips,,,,,,
Thanks a lot...
Rock Lei

Did you ever get a response or resolution? I have the same issue. Did you get a fix for this? If so, could you share?
Thanks

Check table not working for custom field in tcode CAT2.

Hi Guys,
I have created a ZCITY table for Plant which has below 3 field
Code (5 Char) u2013 Key field
Spras (2 char ) Language u2013 Key field
Description (40 Character)
I have added a custom field ZZCITY in CI_CATSDB with check table as ZCITY.
Now in tcode CAT2, when I enter the city code (eg. 12345) thru keyboard. 12345 does not exist in table ZCITY.
System is not giving any error message.
How I can I validate the input data using check table.
Thanks,

HI
At the Domain Level of field ZZCITY enter the VALUE TABLE field in the Value Range Tab of the Domain.
Cheers & Happy Diwali
Ram

Check table 150F: entry O does not exist

Hi,
when i am doing 102 (previous period) for a subcontracting order error message is coming
Error: Check table 150F: entry O does not exist
{ Long text:
Check table 150F: entry O does not exist
Message no. M7001
Diagnosis
In table 150F the entry O is missing.
Procedure
Make sure your entries are correct.
If table has not been maintained correctly, please inform your systems administrator.}
Where we maintain in customizing entry for this table ?

Hi,
To enter the special stock indicator O in the table go to SE16 and give input as 150F, click on contonue. Give O as special stock indicator. Thanking you.

I need to add check whether 21 fields of a internal table are empty or not.

Hello,
I need to add check whether 21 fields of a internal table are empty or not.How can we write a code for the same wand what would be the correct syntax for it.
I tried entering all the fields in the IF loop with AND condition but its giving syntax error.Perhaps this is because the lenght of the IF condition would be more than the allowed one.

Hi,
After the select quiery.
If not itab is initial.
Message 'Table is not empty' type 'I'.
Endif.
Regards,
Jagadish.

How to add check box in table control?

Dear frnds,
In our requirement i am used tablec ontrol for dialog programming, but i am confused about addition of check box as fields in table control.
Any help are welcome from your side.

Hi,
Chk this demo program: DEMO_DYNPRO_TABCONT_LOOP_AT
& RSDEMO02.
Another way:
Go to the edit mode of the screen select the table control column you want to make it as check box and follow the menu EDIT->CONVERT->check box.
(make sure that column definition in itab/ddtab is of size 1 char)
Also chek out this link:
Add Check box in Table control
Hope these help you.
Regards,
Anjali

How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
can I import the same way as I did previously??
but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
please help ...
thanks

Hi,
Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
In step 1 use a suitable database connection that can access the relevant table definitions.
In step 2 select the schema (or schemas) to import. The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
In step 3 select the tables to import. (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
After the import itself has completed, the "Compare Models" dialog is displayed. This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
Just selecting the Merge button should apply all the additions and changes in the new import.
Having updated your Relational Model, you can then update your Logical Model. To do this you repeat the "Engineer to Logical Model". This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
Just selecting the Engineer button should apply all the additions and changes.
I hope this helps you achieve what you want.
David

Existing Customized COPA characteristic to add check table

Similar Messages

Maybe you are looking for