Exit to suppress system messages in Crm

Hi
I need to know if there is a exit, badi or process in CRM 4 that can be used to suppress error messages.
An annoying message appears in the Activity screen and the activity monitor screen. I need to get rid of this
Thanks for any help

I don't believe that there is anyway to "get rid of" a standard SAP message. I have heard of configuration which would allow you to change the message type, like from error to warning and so on, but then this wouldn't help you in your situation.
The only way that I can think of to get rid of the message is to go directly into the SAP code and comment out that line, although this is not recommended.
Regards,
Rich Heilman

Similar Messages

SAPBEX - suppress system messages via VBA?

Hi All,
I've got a few queries embedded in a notebook where I need to refresh them and then process through a number of macros for formatting/processing. I've got the automatic logon and variable macro code working, and the only thing stopping me setting to run at 7am every morning when I'm not here is the System Messages which pop up on logon. Can anyone help me with a way to suppress these or click through them?
Image to make sure people know which messages I mean - [http://img294.imageshack.us/img294/2262/systemmessageqp2.png]
Thanks for any help in advance!
Matt
PS: I've tried searching on the forum and the wiki, but no joy.
Edited by: Matt White on Jun 17, 2008 2:32 PM - added PS.

anyone got any ideas, or even just advice that this isn't possible?

How to suppress forms Message?

When I use NEW_FORM from within a form, before exiting the
current form it asks me to save the changes, how do I supress
this message?
I tried on-message, but doesn't work!
Any help is appreciated.
Thanks!
null

Dennis Bourgeois (guest) wrote:
: geek (guest) wrote:
: : When I use NEW_FORM from within a form, before exiting the
: : current form it asks me to save the changes, how do I supress
: : this message?
: : I tried on-message, but doesn't work!
: : Any help is appreciated.
: : Thanks!
: Here's a couple of ideas,
: - Try setting system.message level to a higher number (maybe
: 20) prior to calling your new form and then set it back when
the
: new form has been established.
: - Try using clear_form(NO_VALIDATE) just before calling your
new
: form.
: - Try using the on-error trigger instead of the on-message
: trigger
: Good luck.
Actually, the only way to "suppress" this message is to either
reset the :SYSTEM.FORM_STATUS or (much recommended) set the
message level to 25 and commit the form before the new_form.
After all, the reason for this message is that the user has
supposedly made changes to the data that need to be committed. If
you are getting this message w/o making changes, then you need to
check your code because something is setting a base table value.
null

How to suppress IDOC message

Hi
I am calling an outbound transaction CC92 for change master from RFC. Now once IDOC gets created i get a message that IDOC created.
Now i do not want this pop up. How do i suppress this message pop up.
Edited by: Rohit Kadage on Dec 15, 2008 8:23 PM

Dennis Bourgeois (guest) wrote:
: geek (guest) wrote:
: : When I use NEW_FORM from within a form, before exiting the
: : current form it asks me to save the changes, how do I supress
: : this message?
: : I tried on-message, but doesn't work!
: : Any help is appreciated.
: : Thanks!
: Here's a couple of ideas,
: - Try setting system.message level to a higher number (maybe
: 20) prior to calling your new form and then set it back when
the
: new form has been established.
: - Try using clear_form(NO_VALIDATE) just before calling your
new
: form.
: - Try using the on-error trigger instead of the on-message
: trigger
: Good luck.
Actually, the only way to "suppress" this message is to either
reset the :SYSTEM.FORM_STATUS or (much recommended) set the
message level to 25 and commit the form before the new_form.
After all, the reason for this message is that the user has
supposedly made changes to the data that need to be committed. If
you are getting this message w/o making changes, then you need to
check your code because something is setting a base table value.
null

Unable to Log-in *SAP System Message : Error while reading a Dynpro*

Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name   : server0
pid         : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

Can not start Messaging server in Sun Java System Messaging Server 6 2005Q1

Hi all,
I installed Sun Java System Messaging Server 6 2005Q1 from Solaris 10 DVD on Solaris 10.
After the installation, I got directory server, admin server running but messaging server not running. I can not start Messaging server (start smtp, http, pop, imap). I found in directory which I installed messaging server but I could not see script "start-msg" and "stop-msg".
# pwd
/opt/SUNWmsgsr/sbin
# ls
MoveUser ha_ip_config imquotacheck imsdirmig mkbackupdir
UpgradeMsg5toMsg6.pl hashdir imsbackup imsexport readership
configure imexpire imsconnutil imsimport reconstruct
control-params.txt iminitquota imscripter imsrestore relinker
deliver immonitor-access imsdaaci mboxutil useconfig
Any idea what might have gone wrong?
Thanks.

Thanks.
I have a problem when I configure the Messaging Server (by running the /opt/SUNWmsgsr/sbin/configure script):
Hostname mailtest for this machine is not a fully qualified domain name. Please
correct this before attempting to configure Messaging Server. Please make sure
that your DNS is working properly.
<Press ENTER to continue> {"<" goes back, "!" exits}
Can you help me fix this problem?
Thanks.

Suppress the message do you want to save the changes you have made

hi all
i have written a rollback
it clears my record
but gives me the message
do you want to save the changes you have made
i have written
:system.message_level :=25;
rollback;
:system.message_level=0;
but still it is giveing me the message
can you please tell me how to suppress this message
please help me
thanks
mandar

try in reverse

Suppress a message

Hello,
I use the triggers "ON MESSAGE" and "ON ERROR" and write null in the triggers to suppress the messages. So it works fine. But if I change for example make a an alter table I get the Message if I want to save the changes! How can I suppress this Message, too!
thanks

I'm not sure what you mean by null trigger, but here is a message handler I created that has proven effective for all my needs so far.
At the form level...
create trigger for 'ON-ERROR'
PR_HANDLE_MESSAGE( 'ERROR' );
create trigger for 'ON_MESSAGE'
PR_HANDLE_MESSAGE( 'MESSAGE' );
In the Program Units...
.PROCEDURE PR_HANDLE_MESSAGE (MSG_TYPE VARCHAR2) IS
. ALERT_BTN NUMBER;
. errtype VARCHAR2(3) := MESSAGE_TYPE;
. errcod NUMBER := MESSAGE_CODE;
. errtxt VARCHAR2(80) := MESSAGE_TEXT;
.BEGIN
.--* Generic system and error messages handler.
. IF errcod IN ( 40100, 40102, 41000, 40200, 41051 ) THEN
. -- Suppress these user messages
. ----------------------------------------------------------- -- ErrNo Message text
. -- 40100 At first record.
. -- 40102 Record must be entered or deleted first
. -- 40200 Field is protected against update
. -- 40212 Invalid value for field xxxx.
. -- 40350 Query caused no records to be retreived
. -- 40400 Transaction complete. N records saved.
. -- 40401 No changes to save
. -- 41000 This function not currently available
. -- 41026 Field does not understand operation
. -- 41045 Cannot find item: invalid ID.
. -- 41051 You can't create records here
. NULL;
. ELSIF errcod IN (-1) THEN
. -- Show these on status line
. -- ErrNo Message text
. MESSAGE(errtype||'-'||to_char(errcod)||': '||errtxt);
. ELSE
. IF MSG_TYPE = 'ERROR' THEN
. MESSAGE( errtype||'-'||to_char(errcod)||': '||errtxt );
. RAISE FORM_TRIGGER_FAILURE;
. ELSE
. MESSAGE( errtype||'-'||to_char(errcod)||': '||errtxt);
. END IF;
. END IF;
.END;

Problem: Regarding Broadcast Messaging in CRM 4.0 and EP5.0

Hi,
We are trying to configure Webclient in CRM4.0 system and integrating into the portal(EP 5). We did the configuration part of Broadcast Messaging in CRM system and also in portal. But when we tried to access broad casting iview(Realtime Status -> Overiew)
through the portal it is giving error
<b>" com.sap.broadcast.client.DisplayContainer2 notinited. "</b>.
It would be greatful if anyone help me in this problem and will give you full points with immediate effect.
Thanks in advance.
Cheers....
Susan

Hi Emilio,
can you please goto SE38, execute MSSPROCS and display the stored procedure
sap_new_dbcheck?
I've seen one case by now, when the part, that is creating the stored procedure, was commented out: in this case it looks like:
CREATE procedure sap_new_dbcheck(
     @dbname varchar(30),
     @outputfile nvarchar(200)=NULL   ) as
begin
    SET NOCOUNT ON
       for testing:
       select @dbname = 'master'
if this applies to you please remove the comment marks in front of the lines (--)
in order that the procedure sap_new_dbcheck is really created again, if you run it in MSSPROCS.
Regards,
Beate

Suppressing error messages from stderr

I am using JNI to connect to some C++ code (which I did not write myself) that has been compiled into DLLs. The writers of the C++ code found it necessary to spam a lot of status messages to stderr (using fprintf(stderr, "spam message")) and I want to suppress that output so that it doesn't show up in the console when my Java application is running. I have tried the following but it hasn't worked:
PrintStream out = System.out;
PrintStream err = System.err;
System.setOut(new PrintStream(new OutputStream() {
public void write(int arg0) throws IOException {}
System.setErr(new PrintStream(new OutputStream() {
public void write(int arg0) throws IOException {}
// call native methods
System.setOut(out);
System.setErr(err);
Does anyone else know how I can suppress the messages? Thanks

redirect stderr to /dev/null ?

Call to Web Sevice in External (non SAP) system from SAP CRM

Hi,
I have to make a call to External system from SAP CRM 5.0 system. The external system will provide a sample webservice which SAP will try to initiate
Can you please tell me:
1. What settings/object needs to be maintained in SAP in order to make this call.
2. how I can make a call to this Web-Service from a BADI and pass the values to web service and also capture the returning value.
Please explain in detail
Thanks,
Mike

Hi Oliver,
I have gone through the documentation and had been able to create a proxy object, uploaded the WSDL file (from local directory) and created logical port,
However, when testing the service, I didn't received a sucess message but
<CX_AI_SYSTEM_FAULT>
<CODECONTEXT>Local</CODECONTEXT>
<CODE>ERROR_WEBSERVICE_RUNTIME_INIT</CODE>
<ERRORTEXT>Error when instantiating the Web service runtime (Error when initializing SOAP client application: ' error_text' )</ERRORTEXT>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
</cls:CX_AI_SYSTEM_FAULT>
What might be the Problem ?

Suppressing Information messages

Hi,
I need to suppress the information messages which I was getting while creating the sales order in VA01 with reference to the Billing document.
VA01 >> Order number >> CREATE WITH REF >> BILLING DOC NUMBER >> CLICK COPY >> getting Information Msg (Needs to suppress)
Getting Information messages saying that copying Items from Billing to Sales order is not defined.
This is a copy control procedure . in VTAF transaction no line items were mentioned for the specific Order.
I just want to suppress the messages which I was getting while copying the line items
Thanks
Abdul.

Why are you doing this via BDC, since you can delete several tables in one go via the repository information system (SE90)?
Thomas

Avoiding system messages in oracle forms.

Hi All,
I'm Working with Oracle forms using oracle form builder in R12. I want to Avoid System message (Save message) so i'm using :system.message_level := 5; but i can't avoid Save message. how can i solve this.
Thanks & Regards,
Macks

You could override on-message trigger and forms will fire this trigger instead of standard message. Whatever you write here will happen. You could suppress given message and let everything else go.

System message problem

Hi All
I have created a form using screen painter
I have done all the functionalities and validation.
No problem, Every thing is clear.
But When I close the form(that is while pressing the X symbol)
A system message appears.
Do you want to save the changes?
With three buttons Yes No Cancel
I don't want this message box to appear.
Is there any way to block this message bar.
Thank you in advance
-Anto

Hi Doshi
I have changed the property of the form as NO TITLE.
I have put a picture box of the title which looks like that.
Now X mark is also there.
So I have again given it in another picture box.
So that I can catch the item press event from it.
In the item press I have typed the coding which I mentioned before.
So no cancel button is here.
No save Button is here.
No exit button is here.
-Anto

Suppress error message in 10g

using
:system.message_level:=25;
commit;
:system.message_level:=0;
i can suppress error message in froms 9i but when i run that form in iAS10g
the message "no changes to save" does not suppress.

It's not a good idea to suppress error messages. If there is a problem, then you (or user) won't know.
If you are using the system.message_level only to try and suppress, the "no changes to save" message, then a better way is to check if there are changes before doing the commit. Like this:
IF :System.Form_Status = 'CHANGED' THEN
Commit_Form;
END IF;

Exit to suppress system messages in Crm

Similar Messages

Maybe you are looking for