Exlusive-IP zone not plumbing all intfcs on system reboot

Hi:
I set up an exclusive ip zone with 2 network interfaces and 2 different ips.
They are bge1 - 192.168.2.12
and bge2 - 192.168.1.116
I also have the hostname.bge1 and hostname.bge2 files set up with the respective host names from the /etc/hosts file in the zone.
Interestingly, when the system is rebooted (init 6, e.g.) only the bge1 interface is plumbed in the non-global zone when it is started
From the global zone, however, I am able to reboot the zone with the zoneadm command: zoneadm -z zone reboot
and now both the interfaces are plumbed.
Is this a bug in the exclusive-ip zones ? or am I forgetting something? I would prefer it if both the interfaces were plumbed upon system start-up.
Thanks in advance!

Did you managed to answer this question since I have just noticed the same problem - day before I go on leave.
I have a zone with an exclusive IP and when ever I reboot the Hardware (global zone) the zone comes up with out a network. At the moment I fix the problem my rebooting the zone. The problem does not seem to be reported with sun before.
Sun Microsystems Inc.   SunOS 5.10      Generic January 2005
State of current zones:
ID NAME             STATUS     PATH                           BRAND    IP
0 global           running    /                              native   shared
2 ldap             running    /zone/ldap                     native   shared
3 smtp             running    /zone/smtp                     native   excl
$ su
$ Password: root password
# zlogin -C -e\@ smtp
[Connected to zone 'smtp' console]
smtp console login: root
Password:
Last login: Fri Jul 11 10:56:51 on console
Jul 11 11:08:04 smtp login: ROOT LOGIN /dev/console
Sun Microsystems Inc.   SunOS 5.10      Generic January 2005
# ifconfig -a
# lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
       inet 127.0.0.1 netmask ff000000
# init 6
smtp console login: root
Password:
Last login: Fri Jul 11 10:56:51 on console
Jul 11 11:08:04 smtp login: ROOT LOGIN /dev/console
Sun Microsystems Inc.   SunOS 5.10      Generic January 2005
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
       inet 127.0.0.1 netmask ff000000
e1000g1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
       inet 193.61.29.3 netmask ffffff00 broadcast 193.61.29.255
       ether 0:1e:68:1e:1b:b
# cat /var/svc/log/network-physical:default.log
[ Jul 11 10:55:23 Leaving maintenance because clear requested. ]
[ Jul 11 10:55:23 Enabled. ]
[ Jul 11 10:55:23 Executing start method ("/lib/svc/method/net-physical") ]
[ Jul 11 10:55:23 Timeout override by svc.startd. Using infinite timeout ]
ifconfig: plumb: e1000g1: No such file or directory
moving addresses from failed IPv4 interfaces: e1000g1 (couldn't move, no alternative interface).
add net default: gateway 193.61.29.245: Network is unreachable
[ Jul 11 10:55:23 Method "start" exited with status 96 ]
[ Jul 11 10:56:39 Enabled. ]
[ Jul 11 10:56:40 Executing start method ("/lib/svc/method/net-physical") ]
[ Jul 11 10:56:40 Timeout override by svc.startd. Using infinite timeout ]
configuring IPv4 interfaces: e1000g1.
add net default: gateway 193.61.29.245
[ Jul 11 10:56:41 Method "start" exited with status 0 ]Any ideas.
I will take this up with Sun at a later date.

Similar Messages

Photoshop CS5 extended not recognizing all of my system memory

I reinstalled photoshop CS5 and prior to that the 3D repousse tool was not working properly but the performance section recognized all 16 GB of memory I have. After the reinstall, it only recognizes 3.5. This is very strange and I am at a loss of how to solve this issue. My system is dual quad core AMD opertons with 2.01 GHz of speed. 16GB of DDR2 RAM and a Nvidia GTX 285 Graphics card. OS is Windows 7 premium. All drivers have been updated as of today. Please let me know if you had the same problem and let me know how you fixed it.

Are you running Windows 32 bit? That prevents 64 bit apps from running.
If you are running a 64 bit version of Windows, and the 64 bit version of Photoshop -- then Photoshop should see most of your installed RAM (can use all of it because of OS overhead and the size of the binaries).

S10 x86, 3com pcmcia 3c589 can not plumb.

I use 3com pcmcia 3c589c, it's can not plumb by s10_x86 also:
#prtconf -D
pci8086,2448, instance #0 (driver name: pci_pci)
pci8086,2527
pci1509,2420, instance #0 (driver name: rtls)
pci1509,2950, instance #0 (driver name: pcic)
pci1509,2980, instance #0 (driver name: hci1394)
#man pcelx
Identifying an Unrecognized Card
If you insert a 3C589 card and it is not recognized (no spe-
cial files created), use the prtconf command and attempt to
identify the problem:
1. Become root.
2. Run the prtconf -D command to see if your 3C589 card is
recognized. A recognized device will appear in the
prtconf output. For example:
# prtconf -D
pcic, instance #0 (driver name: pcic)
network, instance #0 (driver name: pcelx)
3. If pcelx does not appear in the prtconf output, there is
a problem with the PC Card adapter configuration or with
the hardware. You can determine whether the problem is
with the card or the adapter by attempting to use the
card on another machine or by using it on the same
machine using DOS.
The 3c589c can be using on the same laptop using win2000/redhat.
Any body help me?

Try initpcic
# pkgadd -d initpcic-1.7.pkg
The following packages are available:
1 XIGSpcic Xi Graphics PCIC adapter init driver
(i386) 1.7
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: all
Installing Xi Graphics PCIC adapter init driver as <XIGSpcic>
## Executing preinstall script.
### Checking SunOS version
### ERROR: You must have Solaris verson 5.6, 5.7, 5.8 or 5.9
pkgadd: ERROR: preinstall script did not complete successfully
Installation of <XIGSpcic> failed.
Xi Graphics PCMCIA patch
Additional PC Card (PCMCIA) adapter support for Solaris 6, 7 and 8 x86. This package tries to work around a problem in the Solaris bus enumerator boot code. While it detects that a PCMCIA bridge is present, it does not properly initialize the bridge, and therefore it is not available when the system boots. What this package does is to force the bridge into an ISA only mode so that the bridge is usable after boot. Of course this means that CardBus cards cannot be used with this package. This package does not provide support for any of the Solaris Card specific drivers, so if your card is not on the Solaris HCL, it still will not work with this patch.

How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Can not see all the clips in large Icon view in my bin

I arranged my clips in a bin in large Icon view but i can not see all the clips in the bin while in that mode. I see the clips when in list mode or when i drag them out of the bin into the main bin. As soon I drag them back in large icon view bin they do not show up, when going back in list view they are there.
Any idea
Also my daughter accidently pulled the electrical plug, which turned my external hard drive off. So the media was off line. I hit reconnect the clip but the clip does not show as connected in the bin it keeps the Media offline icon but putting the clip in the viewer or time line it plays it. So the clip is reconnected
hope anybody can help with those two issues thanks

Nick
thanks for your message it helped to show the clips. Here how I solved it. I put the clips i could not see in large Icon view, to the Project folder. Even in the project folder I was only seeing the clips with Thumbnail in list view. When i hit large Icon view the clips disappeared, and they could not have been lower down as i only have about 5 folders in the project. I then clicked arrange the clip by name and they showed up again. Like that i dragged the clip back in to its bin and it showed up. The reason for going back and forth I arranged the clips manually in the bin before and when hitting arrange by name it spread them to far apart and put the clips not in a sequence I liked.
for the second part I followed Neil's suggestion it worked.

Can not view all the thumbnails in version 9 adobe standard

Hello,
I recently installed adobe standard 9 running parallel with adobe standard 5.
My end user is claiming of the view setting for patient data. She can not scroll all the way to the bottom
as she could in adobe 5. She can see all the thumbnails minus the last row. I have changed the prefereces to show the same
as adobe 5. However I can not get the correct settting to make it right for her.
Any adivse or trouble shoot steps would be appreciated. Adobe said to update the product, I have done that last night.

How do I do that?
Date: Tue, 14 Dec 2010 10:10:01 -0700
From: [email protected]
To: [email address deleted by host]
Subject: Acrobat Windows Can not view all the thumbnails in version 9 adobe standard
Change the size of the thumbnails, change the size of the thumbnails window, or upgrade Acrobat X.
>

Can not use all the tools in my drawing markups any ideas on getting them to work?

Can not use all the tools in my drawing markups any ideas on getting them to work?

Hi tonys60181,
Could you please let me know what version of Adobe Acrobat are you using.
What all drawing tools are you unable to access?
Is this issue specific to one PDF file or all?
What exactly happens when you try to use any drawing markup?
Please let me know.
Regards,
Anubha

Using tab groups but Firefox 28.0 crashes and even can not save all tabs in archive recently

Hi. I installed tab groups addon on my firefox 28.0 (firefox portable version) and each group has its tabs. of course. Problem is that Firefox crashes when i work on a group with the tabs and even can not save all tabs in archive as MAFF recently too. When i try to save all tabs in archive as... i choose the name and hit save and wait but after some time this crashes too. Last time i saved all my tabs and groups as MAFF or other file was end of april and since then i can not save them anymore because of the crashing.
I read on the help site to delete Firefox then reinstall ect. to fix problems but I DO NOT want to erase my groups with their tabs as i chose this solution working with group tabs as it would be to hard on my cpu when i use for each group a different browser for example.
Please help me fix this problem with the crashes but without loosing my groups and its tabs as they are all important and do not wish to erase them as i use them all.
Thanks and hope for a soon reply :)

Can you give me your crash reports?
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here.

I can not see all "Divisions" in BP Rel.--Partner Function Assignment

Hi,
When I edit "Partner Function Assignment" in BP reliationship such like BUR011("Employee Responsible"),
I can not see all "Divisions" in list which I can see in configuration via SPRO-->Customer Relationship Management->Master Data->Orgnizational Management->Division Setting->Define Divisions.
E.g., in configuration, I can see 7 records of divisions from "001" to "007", but in "Partner Function Assignment" of BP relationship, I can only see "002" to "004".
Do you know why? Thanks a lot!
Best regards,
Long

hi
that should not be happening,if they are visible in one client then should be there in another too
do one things try run this
hrbc1_atributes_buffer_update
it will refresh the buffers of your org structure and then you may be able to add this
also check the check box where it is mentioned that"object determination should be permitted"
remember it will run only for once after you run this the check box will be unchecked again
i guess it may solve your probs
also try to structure your org structure index
use t code
crmd_index_om
and withtin the object type give O
and execute
best regards
ashish

Why the 2LIS_08TRTK extractor can not get all data

Hello, BW Gurus.
Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.

Is it because
<i>
Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.
</i>
- from oss note 573470.

2lis_11_VAITM not inserting all data in ODS

Hello Gurus.
I'm using extractor 2lis_11_VAITM, when I test the extractor in RSA3, it is bringing me all registers of table VBAP, but when I load this extractor into an ODS in BW, It is not inserting all registers into the cube, some "return orders" are missing, how can i solved this problem ???? I'm using in ODS key Doc number and position.
THANKS IN ADVANCED.

Hi Sudheer, ther is no selections during data load, and also ther isn't any routine(either in transfer or update rules). It's supposed that all registers have to be loaded to the ODS no ?? because i'm using key Doc number and positions, so I want all documents with all positions to be loaded, but this is not happening, there are missing the "'return orders'".
Any other idea of why this is happening ??

FDM export to HFM - 2nd export did not clear all data from 1st export?

Has anyone experienced exporting a replacement FDM file to HFM where the 2nd file did not contain an account that was present in the original file and that account/value in the 1st file then remained in the HFM trial balance and caused it to be out of balance? Does the replace export option not clear all the prior file data? The only unusual part of it might be that the problem account was derived using logic group script? Thanks.

Thanks Hensen - Sure, it was easy enough to fix once I deduced what the problem was - although my solution was just to use the data clear function and reload. The real question is how to prevent it from happening again and it sounds like I can't do much about it - other than trying to train the users to watch out for do-over files that have fewer accounts than the original load?? Am I wrong to think that HFM should try to fully clear all previous data from a load file if there is a replacement or at least try to validate whether or not all prior accounts have been repopulated?? There's plenty of good validation in the validation step of FDM. Why not during the export step? If this makes sense, I'll put in another "enhancement request" to support.

We can not clear all recents(30 recents call). When Tango show "No recents call". We touch other buttons and come back to Recents button again. It still show 30 recents call.

We can not clear all recents(30 recents call). When Tango show "No recents call". We touch other buttons and come back to Recents button again. It still show 30 recents call.

No one here is going to do anything about it. Send feedback to Apple.
http://www.apple.com/feedback/ipad.html
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

Can not sync all photos in Aperture into Iphone 5

I can not sync all photos in Aperture into Iphone 5. It always can sync some photos into 5. Then finish and prompts: "itunes can not synchronize (other)thousands of projects, and see more information in itunes". That means most of my photos can not seen on Iphone 5, it seems just can't import to 5. Is that the problem of Iphone or the pictures in Aperture, or even just because lack of sufficient space?

Solved here...
Photos app not syncing with iTunes

Can not See All of my Music Library on the play list

I accidently moved my music library (My documents/My music/my itunes...)
When I moved it back, iTunes does not see all the song (over 2000). It only see the purchased music. I can use the Add to Library function (In the File menu) and add each song, song by song and I have added a few dozen songs back to the play list. So all the music is there, in the directory, Just can not get iTunes to recogize them.
ANY suggestions to adding the whole library back at once.
Thanks
Dell 4400 Windows XP

Do you at least have the little ! (exclamation point) next to the "missing" songs?
I just had the same thing happen to me, but mine occurred simply by upgrading to the latest version of iTunes... in the process it "lost" about half of my music.
I simply unchecked "Keep iTunes Music folder organized" under prefrences/advanced tab.. hit "OK", then went back in and re-checked it, hit OK and iTunes began "organizing" my library and miraculously iTunes found all of the missing music.
There are some decent articles about moving your iTunes library on the support site. They don't always work as advertised, but you're pretty much stuck with My Documents/My Music/iTunes on Windows.
You may be able to reverse things by following those instructions as well.

Exlusive-IP zone not plumbing all intfcs on system reboot

Similar Messages

Maybe you are looking for