Experiencing lag while gaming online with WRT310N

I have recently setup my desktop computer wirelessly with the WUSB600N adapter and the WRT310N router. My signal is great and I'm connected at 270 Mbps most of the time. I run Windows XP and have the Windows firewall disabled. I tried to play Guild Wars online last night and ran into problems. Every 15-30 seconds, the game would lag very badly for about 2-3 seconds. On two different occasions, it disconnected from the game entirely. I'm hoping there are simply some settings I can change to fix this. Any ideas?
Solved!
Go to Solution.

Problem solved. Thought I'd post my solution in case anyone else runs into the same problem. After extensive searching on this site and others, I developed a list of things to try. The first one I tried was port forwarding but that didn't help. The second thing I tried was to turn off the Windows WCZ wireless controller. I'm now using the Linksys software to connect and the lag issues have been eliminated. You might wonder why I wasn't using their software to begin with. I had lost wireless connection entirely a couple weeks ago and had to call support. They walked me through changing some settings on my router and setting up the WCZ to control my wireless to get me hooked back up. Apparently the fix was accomplished by changing the router settings alone and had nothing to do with switching to the WCZ. Hope this helps someone.

Similar Messages

  • Is anyone facing the similar problem of visible lag while opening app with 3G data on? It seems apple has made 5s slow to improve iphone 4 performance.5s was very smooth on 7.0.6 even with 3G data on. Is this a bug? Is apple going to fix this soon?

    Is anyone facing the similar problem of visible lag while opening app with 3G data on? It seems apple has made 5s slow to improve iphone 4 performance.5s was very smooth on 7.0.6 even with 3G data on. Is this a bug? Is apple going to fix this soon?

    I have same Problem. I tried all options - Reset All Settings, Erase Content & reset all settings, Upgrated to IOS8.1, Restore using iTune. But problem persists.
    When I turn Cellular Data or Wifi ON, then there is a lag while opening the Apps. But If I turn Data/Wifi off, phone becomes super fast. I have checked with my friends. They are not facing this issue. Not sure if Apple know this.

  • Buying new HDTV but don't want lag while gaming

    Hi all.
    So I'm getting a new HDTV soon, and I want to connect my ps3 and xbox 360 to it. I'm getting the LG 47LH90 (47" 1080p 240 Hz) and I'm getting the Monster Cable HDMI 114013-00
    (THX 1000)  for my ps3 to play movies and such. Thing is, I also want to try Halo 3 online on the TV (I've heard playing Halo on bigger TV's is bad for your aim but I at least want to try).
    So my question is will this HDMI cable I'm getting give me any screen lag while trying to play Halo? (Yes, I have an elite so the 360 has an HDMI port) I've heard people say that VGA cables are also good but if this HDMI cable I have works I want to know if I'll be able to use that so I don't have to buy another cable for nothing. Thanks for responding.
    HDTV link <http://www.bestbuy.com/site/LG+-+47%22+Class+/+1080p+/+240Hz+/+LED-LCD+HDTV/9318623.p?id=12180844102...>
    HDMI cable link <http://www.bestbuy.com/site/Monster+Cable+-+THX+1000+4%27+HDMI+A/V+Cable/9345693.p?id=1218088187400&...>

    If you are gonna use an HDTV, you will have to accept lag. Your best bet is to go with a 60hz LCD or plasma, which you can easily still get. None of that 120hz nonsense. But, what you can do is get any ole HDTV and use the Microsoft VGA cable instead of the HDMI. That will do a lot to reduce your lag to the minimal amount because HDTVs don't use image processing on VGA signals and the newer TVs actually support full 1080p over VGA. Your milage will vary though and you should check the manual of any TV you are considering in order to see what resolutions it supports over VGA so you don't make a blind-buy of the wrong thing.

  • Lag while playing online.

    I just got the WRT54AG router. Now I get a lag while playing xbox live games (360), as well as a lag when playing WoW on my pc. I logged into the router and clicked on the app. and gaming tab, but I do not understand where to type what. Or how to set up adresses on the pc and 360, and whatever else. Can anyone bear with a dummy?

    ensure that the router firmware is v1.79 .. if not go to www.linksys.com/download and download the firmware for the router ... upgrade the firmware through the router's web interface ..
    change the MTU settings on the router to 1365 ..

  • Lagging while gaming

    Not sure what forum for this spands a few. I play Everquest (online game) and have a 2 year old computer w/ Vistas. I slighlty upgraded the video card and added memory. I am running about 3-4 gig I think (I am at wotk). That was upgraded from a computer that was about 1/2 as good. Long story short..when I game, I lag badly (choppy movement) and loads kinda slow with sometimes have graphic issues (naked characters lol). I can still play but it is annoying. Especially because I have every graphic option in the game turned down or off (really sucks for my visual experience sucks now but do it so I can play). I really thought when I upgraded to this computer that I would be able to play a lot easier than other older computer but NO. It is not much better. I was wondering if the best buy thing where they "tune up" your computer would help? I just don't want to spend 100 bucks and nothing change! I have 100 mps internet soi don't think that is it, lots of memory is still available and actually a p[retty clean system. I doubt anybody can say yes or no but I'd rather have some idea if any type of tuning they do may help or would it just be for general computer maintenance. Heck I can even use virus protection when I play for it really slows the entire systaem down. It just doesn't seem right. ideas?
    Solved!
    Go to Solution.

    what graphic card did you upgrade to? did you accidentally upgrade to a lower end?
    did you make sure your powersupply is compatible with ur graphics card? how do u have 100mbps internet? i think you're talking about ethernet connection. from router to network is 100mbps, but ur Internet service provider still limit you at around 10 mbps if u have comcast and 750kbps if u're using dsl. however this won't be an issue if you're problem is graphics issue. whats wrong with "slow mo" porn? (naked characters)

  • Lags while switching apps with iPhone 4 running iOS 7

    I've noticed that since I upgraded to iOS 7, my iPhone lags a lot while switching different apps. This didn't happen to me using iOS 6.1.3. I hope this gets sorted out as soon as possible.

    Either do a reset or reset network settings.
    reset: hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    If that doesn't help. settings - general - reset - reset network settings.
    You will not lose any data doing both of those suggestions.

  • Lag while gaming

    My laptop recently started lagging mid-game.
    In order to help you understand my problem have attached a monitoring screenshot of MSI-AfterBurner
    At the point where my GPU1 usage becomes 100% my games starts lagging terribly and system temperatures seems to drop back to normal at that point.
    (The game is giving me a great 60+fps until that point) Please help me find the solution!!
    [ ERROR: SPECIFIED ATTACHMENT MISSING ]
    My system is MSI-GX60 3BE
    8Gb RAM,
    2Gb Radeon 8970M
    Windows 8.0 64-bit
    P.S please don't recommend updating my drivers and BIOS. Already done that
    Thanks in advance

    Quote from: JakeSully on 15-January-15, 00:40:31
    i would guess Zipper is saying your overclocking amount you assigned on gpu is way to much causing it to being to drop on temps at 100% usage since clock speed is above what gpu can take to be stable at 100% usage so try lowering your overclocking a bit and see if issue remains.
    I haven't overclocked my GPU yet,it's still in it's default state.

  • Lag spikes while gaming, probably due to wireless network

    While gaming online, I get lag spikes, or as I like to call them, due to the nature of what happens, warping, every so often. By warping I mean I do something, my screen shows it, but the action never got sent across the server. So if I were to move right during a warping event, it'd show me that I moved right but then in a second I'm back where I was. (I hope that makes sense)
    As for what I've done to try to rectify this problem:
    Reset the router
    Open up all necessary ports (actually I just enabled DMZ, which would open all ports)
    I would have updated the drivers for my wireless adapter, but this problem also occurs when I'm gaming online on a console connected to the wireless network so I highly doubt the drivers would be the problem.
    As for my router's model number, it's WRT54G.
    Now, for the question I have. Would switching to a WIRED network fix this problem? (despite that pinging from a wireless connection then pinging from a wired connection was consistent)  If so, why? (the why would be to convince my dad, as he believes that due to the consistency in the pinging attempts (only 3-4 packets lost out of 100 when pinging to Google) the problem couldn't be due to the wireless network)
    Many thanks for your time.

    You should try to upgrade your router's firmware, reset and then re-configure your router...
    Download the router's firmware from here 
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    Adjust the Wireless Settings after re-configuring the router - 
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
    Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    -Wireless Network mode should be mixed...
    -Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
    Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...See if you face the same problem...

  • My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails. What is wrong with it?

    My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails, even works fine with headsets. What is wrong with it?

    well i'd seriosly say point a hot hair drier at the speakers as water has entered the phone most commonly via the home button but avoid getting it too hot let it cool every 3 minutes after constant drying. Don't worry I have honestly dont this with my iPhone 4 GSM 16GB. For future reference avoid letting it get wet.

  • My phone lagged while trying to download the new update. It is now stuck on the loading screen that is black with the white apple. How do I fix this?

    My phone lagged while trying to download the new update. It is now stuck on the loading screen that is black with the white apple. How do I fix this?

    Reset the device by pressing and holding the home and power buttons for about 15-20 seconds.

  • Lag while charging

    Hello there,
    I bought my iPhone 5 online one month ago,but i am facing really annoying problem which is my iPhone lag while charging by the charger,it is noticable when navigate between pages on the home screen.(i did restored my phone twice using iTunes).Also i have notcied the vibration is too loud and buzzy.(First time using Apple product maybe it's a common issues)
    And also i want to know where to claim the warrnty on Malaysia,since i bought my iPhone from online apple store in case if something happens.
    sorry for my English
    thnak you,

    That happens to some:
    - Try another cable
    - Try another charging source
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Connection issues while gaming on wireless

    Hi i have recently upgraded to BT infinity and its great im getting high download and upload speed, however im experiencing lag whenever i play games. I am on wireless connection and i know that wired connection is better however it is inconvenient for me. If i have my ethernet cable in there isnt any lag in the game but when i dont it does.
    My connection in a game is never bad and i usually have a max ping of 60ms and an average of 30ms.
    My friend doesnt seem to have any of these issues even though he is on a laptop and his connection speed is around 60Mbs when mine is on about 117Mbs
    I am wondering what the issue even though i have a good connection in game is and if there can be a fix without having to be wired
    Thanks, Sam
    Solved!
    Go to Solution.

    If there is no lag using Ethernet then the problem is wireless and is nothing to do with your broadband connection. You could try changing the wireless channel on the Homehub. See link
    http://bt.custhelp.com/app/answers/detail/a_id/14094/related/1
    You should also check that your wireless network card has up to date drivers. Use the card manufacturer's website rather than using Windows which can be out of date.
    Have you tried gaming at your friends to what happens. This will let you see if the problem is with your computer or if it lies elsewhere such as with wireless interference.

  • Satellite M70 - Drastic drop in FPS while gaming

    My laptop is a Toshiba Satellite M70-148.
    Link: [See here|http://nl.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=NL&BV_UseBVCook ie=yes&PRODUCT_ID=109803]
    I have bought my laptop in febuari 2006. I've been playing the game America's Army v2.5 since that time.
    Since 4-5 months I have been getting serious drops in FPS while gaming. I am talking about from 85 FPS (steady with the highest settings) to more frequently drops to 30-40 FPS and even more to 8-10-15 FPS (on the bare lowest settings).
    At first I thought this could be fixed by increasing RAM memory, so i bought 2 sticks of 1 GB RAM. And this didn't work at all.
    I've installed a fresh backup, with nothing but Windows XP (Home, legal of course with all updates) and the game and i'm still experiencing the drops in FPS.
    What I seem to be hearing is the fan blowing harder when I get the FPS drop and sometimes it does the same when it goes back to 85 fps.
    Because it has been able to run smoothly before I am inclined to think that this is some hardware malfunction that is causing this problem.
    Is there any way I can replace/upgrade the hardware inside my computer?
    Or can someone give me a suggestion as to where i should look to find the problem?
    Thanks a LOT!
    // PAMF

    If you think you have a hardware problem with your notebook, I would go to a service partner from Toshiba.
    You can search for a partner in your region on this website:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
    I hope this helps you...
    best regards,
    Maurice

  • Bootcamped mac stops charging while gaming?

    I've been using Windows 7 with bootcamp on my Macbook Pro for gaming since October of 2013 and this problem only started a few days ago. While in Windows 7, it charges normally until I start running a game or doing something intensive on the computer, at which point the computer stops charging, no matter what the battery percentage is. From what I could find online, everyone says this is normal behavior and there's not enough power to both play the game and charge the computer at the same time, but this only started happening for me a few days ago, so I don't think it's normal. I'll be playing the game and the light on the charger will turn green and stop charging, and eventually I'll get a warning that I only have 7 minutes of power left because the battery's been drained. As soon as I stop the game, the charger goes back to orange and resumes charging.
    While in OSX, the battery stays fully charged and the computer gets its power from the adapter, even while gaming, so it's got to be on the windows side of things. Should I just reinstall bootcamp or something?
    Specs:
    Macbook Pro 15 in, early 2011
    OSX 10.9.2
    2.2 GHz Intel Core i7
    8 GB 1333 MHz DDR3
    Intel HD Graphics 3000 512 MB

    Videos are often CPU/GPU intensive and will create heat inside a MBP.  However they should not be responsible for shutting down the charging process and the charging process itself should not cause a lot of heat.
    Check the connections of the charger and the MBP and see if they are clean.  The contacts on the charger are spring loaded so make certain that they are not stuck.
    Try the SMC reset.  IF there is no success, run an Apple Hardware Test to see if that will pick up any clues:
    http://support.apple.com/kb/ht1509
    You may have to use OPTION D to start it.
    Ciao.

  • Re: [iPlanet-JATO] Experiencing problem while executing model.

    Hi Todd,
    Thanks a lot for your input!
    In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
    column name in the resultset. So I am using this as a column in Jato
    Descriptor for Plan_Dt. Now it is working fine.
    Thanks and Regards,
    Santa.
    ----- Original Message -----
    From: Todd Fast <toddwork@c...>
    Sent: Thursday, July 26, 2001 9:50 AM
    Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
    Santa--
    I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
    execute of TiledView, it throws an exception describing "PLAN_DT not found
    in ResultSet". If you execute this query on the SQL prompt then we getrows
    of data. Please could you tell us how the mapping between model and
    resultset works ? And what changes do we have to make to execute thisquery.
    >>
    SELECT PART_NM,NEWTXTDOLL
    TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
    FROM cpsselect
    WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
    you provide in your model's column descriptors. It sounds as if you are
    providing the column name "PLAN_DT" in a descriptor, and when the model
    tries to look up that column in the result set, there is no such columnand
    the operation fails.
    In order to debug this, you should try running your query with a JDBC
    connection, not SQL*Plus or your command-line SQL tool. What you need to
    find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
    a column name in the resut set. The easiest way to do this is to write a
    simple class that does nothing but use your JDBC driver to connect the
    database and execute this query. After execution, use theResultSetMetaData
    information to find out the column names for the result set. Then, use
    these column names in your JATO column descriptors.
    Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
    I'm sorry, this isn't enough information for me to offer any suggestions.
    Using the technique above, determine which columns are coming back in the
    result set, and make sure your display fields in the TiledView are boundto
    those column names. The problem could be something as simple as a typo in
    the field's bound name, or something more complex like the column in the
    result set being named something you don't expect.
    Another approach might be to alias the columns yourself using the "AS
    <alias>" expression, and assign them names that you choose instead ofusing
    the names assigned by the database or JDBC driver.
    Todd
    [email protected]
    The Information contained and transmitted by this E-MAIL is proprietary to
    Wipro Limited and is intended for use only by the individual or entity to
    which
    it is addressed, and may contain information that is privileged, confidential
    or
    exempt from disclosure under applicable law. If this is a forwarded message,
    the content of this E-MAIL may not have been sent with the authority of the
    Company. If you are not the intended recipient, an agent of the intended
    recipient or a person responsible for delivering the information to the named
    recipient, you are notified that any use, distribution, transmission,
    printing,
    copying or dissemination of this information in any way or in any manner is
    strictly prohibited. If you have received this communication in error, please
    delete this mail & notify us immediately at mailadmin@w...
    [Non-text portions of this message have been removed]

    Hi Todd,
    Thanks a lot for your input!
    In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
    column name in the resultset. So I am using this as a column in Jato
    Descriptor for Plan_Dt. Now it is working fine.
    Thanks and Regards,
    Santa.
    ----- Original Message -----
    From: Todd Fast <toddwork@c...>
    Sent: Thursday, July 26, 2001 9:50 AM
    Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
    Santa--
    I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
    execute of TiledView, it throws an exception describing "PLAN_DT not found
    in ResultSet". If you execute this query on the SQL prompt then we getrows
    of data. Please could you tell us how the mapping between model and
    resultset works ? And what changes do we have to make to execute thisquery.
    >>
    SELECT PART_NM,NEWTXTDOLL
    TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
    FROM cpsselect
    WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
    you provide in your model's column descriptors. It sounds as if you are
    providing the column name "PLAN_DT" in a descriptor, and when the model
    tries to look up that column in the result set, there is no such columnand
    the operation fails.
    In order to debug this, you should try running your query with a JDBC
    connection, not SQL*Plus or your command-line SQL tool. What you need to
    find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
    a column name in the resut set. The easiest way to do this is to write a
    simple class that does nothing but use your JDBC driver to connect the
    database and execute this query. After execution, use theResultSetMetaData
    information to find out the column names for the result set. Then, use
    these column names in your JATO column descriptors.
    Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
    I'm sorry, this isn't enough information for me to offer any suggestions.
    Using the technique above, determine which columns are coming back in the
    result set, and make sure your display fields in the TiledView are boundto
    those column names. The problem could be something as simple as a typo in
    the field's bound name, or something more complex like the column in the
    result set being named something you don't expect.
    Another approach might be to alias the columns yourself using the "AS
    <alias>" expression, and assign them names that you choose instead ofusing
    the names assigned by the database or JDBC driver.
    Todd
    [email protected]
    The Information contained and transmitted by this E-MAIL is proprietary to
    Wipro Limited and is intended for use only by the individual or entity to
    which
    it is addressed, and may contain information that is privileged, confidential
    or
    exempt from disclosure under applicable law. If this is a forwarded message,
    the content of this E-MAIL may not have been sent with the authority of the
    Company. If you are not the intended recipient, an agent of the intended
    recipient or a person responsible for delivering the information to the named
    recipient, you are notified that any use, distribution, transmission,
    printing,
    copying or dissemination of this information in any way or in any manner is
    strictly prohibited. If you have received this communication in error, please
    delete this mail & notify us immediately at mailadmin@w...
    [Non-text portions of this message have been removed]

Maybe you are looking for