Explorer Issues with Website Adding White Background

I am working on making simple cosmetic changes to a website I did not build. More complex job than I thought mostly because of trying to figure out the past designer's coding. I have a basic knowledge and was able to make the needed changes. Except that in Explorer there are white boxes behind my header links. The background used to be white with blue text, I have switched them. Works fine in Chrome, Firefox and Safari.
The website is: iflygillette.com
Anyone have an idea on how to fix this? You can see the screen shoot below. Our slideshow of banner ads also stops after one loop on Explorer. I've been reading through code until I'm cross-eyed. Not sure. Thank you!

Your banner is a Flash animation which cannot be viewed by iPhones, iPads, iTouch, Androids or any other browser/device that does not have Flash player.
You may want to change that to a jQuery rotating banner. For examples, look at jQuery Cycle2 or Wow Slider.
In your SpryMenu.css file towards the bottom, there are hacks for older IE browsers. Currently, your background color is set to white. Change that value. Save and upload the style sheet to your server.
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
        display: inline;
        f\loat: left;
        background: #FFF; /**CHANGE THIS COLOR**/
Nancy O.

Similar Messages

Explorer issue with video swf

Hi can anybody tell me why Internet explorer did not open the video, before I had accept to open this site, in firefox it just open,
I have tried Amara slide show bouilder, and here there is no problem with the swf files in explorer.
I know that I in the internet explorer option can change this irritating bloking, so can anybody tell me why this happened for me
I have visit a lot of internet homepage, where there is a video and where internet explorer did block the site.
I have sent my html file and the swf file.
best regard
kenneth

Hi,
Does the issue occurs with other browser such as Chrome or Firefox?
Please try the following to check the issue:
1. Updating your graphics driver. visit the website of your computer manufacturer to download the latest driver.
2. Disable hardware accelerate to check the issue
Hardware acceleration is a feature in Adobe Flash Player that usually delivers a better video playing experience; however, sometimes it may cause issues.
The option to disable hardware acceleration is only available for certain versions of Adobe Flash Player system plug-in and operating systems (OS).
Follow these steps to see if the option is available:
a. Right-click on the on the video you’re having issues with
b. Click Settings
c. If you see the option Enable hardware acceleration, deselect it. If you don’t see it, the option is not available for you.
d. Click Close
e. Refresh the page and check whether the video is working
Once you disable hardware acceleration, the change will apply across all Internet browsers on your computer.
3. Reset Internet Explorer settings
http://support.microsoft.com/kb/923737
Please understand that reset Internet Explorer to its default configuration. This step will also disable any add-ons, plug-ins, or toolbars that are installed.
4. Disable the security software temporarily and see if it works.
Hope it helps.
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

Safari or IPhone issue with Website ..

Hey guys, .. question..
I have a Win 2003 Server and setup IIS. I've designed a website. Firast I had many *.png and a wallpaper with a size of 500K. I had issues with getting the page loaded, which mean that 2 images were loaded and the rest not. now i reduced each pictures size down to 5K. So the web site will load really quick now.
When I go to my work computer i can access my site without any issues. but the IPhone try to load but then after 5-10 minutes it don't show anything. I connected to EDGE first and then to another WIFI spot to see if it's the connection speed.
So my question, SAFARI on the IPhone do show lots of websites like ESPN or CNN which have a bigger data size but it can't show a simply site that i've made.
what could be the issue? I testd it just now from y work system and it pops up without issues, i also did a cold bootup (IPhone)

flavor4real,
To help narrow it down some, does the page load with Safari beta for Windows on your computer?
Does the page get any errors with tools for validating the HTML of the page? Such as:
http://validator.w3.org/
Have you verified your links to the images are not pointing to your local hard drive, instead of using a URL?
Hope this helps,
Nathan C.

Issue with website Storage Settings panel

Hi
I have an issue with the Website Storage Settings panel. I want to increase the storage settings but the bar always resets when I reload the page.
I only seemed to have this issue after I updated to the latest software. Any help?

You don't specify your operating system. On Windows, try deleting the 'Flash Player' folders in %APPDATA%\Adobe and %APDATA%\Macromedia
No browser window must be active when you do that.

Transparency issues with images over color backgrounds

I have a transparent .png that I place over a color background. When I do this, there's a slight discoloration in the image's transparent background. As a result, it looks the image really isn't transparent, but has a slight white background. I can't seem to get rid of this and have tried for days. Can anyone help me out here?

Thanks Robert. You're a lifesaver. This trick totally worked. You saved me a huge headache. I appreciate it.

IE7 issue with website

I developed my own website in Dreamweaver CS4 checking browser compatibility and validated all pages for both IE and Firefox. I uploaded my files to my Yahoo hosting account and now that it is live I can not view my home page (index.html) and one other page with IE7 - but all pages are viewable with Firefox. I verified that all my pages have the same header information and can't figure out why only these 2 pages are having an issue. When they load in IE I get a blank white screen with 'done' listed on the bottom left of the browser and not showing any errors.
Does anyone have any ideas?
Thanks
Here's my header code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta name="generator" content="HTML Tidy for Linux/x86 (vers 11 February 2007), see www.w3.org" />
<title>Website Design and Development Services - Morgantown PA</title>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii" />
<link rel="shortcut icon" href="images/favorites_image.png" />
<meta name="verify-v1" content="aivAOr+/q1vYQ52EJFhsLVAW6Qc/7Bx5kgptFLfa0Ds=" />
<meta name="keyword" content="web site design, website designers, ecommerce, e-commerce, web development services, web develop, website design services, professional, web page, website design company, design, web design, web application, web applications, flash, cms, content management system, seo, search engine optimization, morgantown, PA" />
<meta name="Description" content="SAS Website Designs offers web development and online services for personal and business needs. Professional web page design services including ecommerce websites, contact management solutions and search engine optimizations services." />


<link href="css/style.css" rel="stylesheet" type="text/css" />
<style type="text/css">
/*<![CDATA[*/
<!--
.center {text-align:center;
img {
    float: none
.bg {
     background-image: url(images/home_bg.jpg);
     background-repeat: no-repeat;
     background-position: top right;
.right {
        margin-left: 48%
.floated {
         float: left;
         width:100%;
         text-align: justify;
         font-weight: bold;
.floated2 {
          float: left;
          width:65%;
.style1 {
        font-weight:bold;
        text-align: center;
/*]]>*/
</style>
</head>

As a Yahoo-hosted site, it will never completely validate due to the code Yahoo inserts after the </html> tag on every page. The validator will help find errors on the rest of the pages, though.
But this particular problem will not be caught by the validator. You have an opening HTML comment in one of your style elements that does not have a matching closing HTML comment. Since using HTML comments inside embedded stylesheets hasn't been need since - oh, what NS 4?, just delete it.
Change this:
<style type="text/css">
/*<![CDATA[*/
<!--
.center {text-align:center;
to this:
<style type="text/css">
/*<![CDATA[*/
.center {text-align:center;
I found your site and you are missing your icon file:
images/favorites_image.png
HTTP/1.x 404 Not Found
Also, delete the non-breaking space following your opening list: <ul>& nbsp;
(space added for forum display)
Mark A. Boyd
Keep-On-Learnin' :-)

Weird issue with website(/s?)

I guess this relates to networking?
Anyway, for some arcane reason DeviantART stopped working, cleared cache, disabled all extensions, flushed history, flushed cookies, did everything, still nothing.
installed midori and firefox, still not working.
so I decided to contact their help desk, which just proved to be an utter waste of time (as expected)
here's a video demonstrating the issue, it's about 5 minutes long and shows extensive testing with all three mentioned browsers (two at stock settings, mind you) and it shows me re-disabling all extensions and clearing everything but saved passwords and form autofill data in chrome.
https://www.youtube.com/watch?v=-eKQRWSL3pc
I'm at loss, it's been over a week now and I've tried everything and can't find even a hint as to what causes it.
at the time of recording the video I was running kernel 3.15.5-1-ARCH, not I'm running 3.15.5-2-ARCH (if that matters), DE is Mate 1.8.1, chrome version 35.0.1916.153 (Official Build 274914), Firefox version 32 and midori whatever version is current.
from what I can tell every other website works fine, no idea if other sites break since I don't visit too many websites.

[shiina@zero-dev ~]$ wget http://www.deviantart.com
--2014-07-30 05:45:47-- http://www.deviantart.com/
Resolving www.deviantart.com (www.deviantart.com)... 199.15.160.100
Connecting to www.deviantart.com (www.deviantart.com)|199.15.160.100|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘index.html’
[ <=> ] 157,698 119KB/s in 1.3s
2014-07-30 05:45:49 (119 KB/s) - ‘index.html’ saved [157698]
as for what stopped working means, the video explains it quite well.
the dropdown menus don't work, the deviantWatch is broken and the menu items are unclickable (whenever I'm hovering over a menu I click after a while, then when nothing happens I click frantically to demonstrate it's not working).
at first I assumed (and still do) that the issue was on their end as it only affects me but they more or less said (heavily paraphrased) "no, fuck you. we can't replicate it on ubuntu therefore it must be on your end"

Having issues with websites and videos

At some point last week, my computer began having problems loading certain websites (I noticed it on about 3 different sites.) The sites would load but not until after several minutes of loading. My main issue is that I can't watch videos on other sites except YouTube. YouTube videos work fine but when I try to watch videos from other sites, it's just a blank box. I'm not sure if these two are related but they both started around the same time. Here are the things I've tried:
-Updated Flash
-Updated Silverlight
-Reset my browser
-Tried other browsers
-Tried logging on as a guest
-Unplugged my router and modem (didn't have much hope for this but, it fixed a problem I was having with YouTube before)
-Downloaded older version of Flash
I tried searching around for solutions but, I haven't been able to find someone with this same problem. Does anyone know what's going on? Thank you in advance.

This issue is normally caused by the person that made the Video, it depends on what they used to create the video.
Some users have had to download different players to eliminate this problem.
Quicktime, Adobe's Flash Player, and on and on.
To eliminate this problem I suggest you download VLC Player and it will Play just about everything out there.
http://www.videolan.org/vlc/index.html
I am almost poitive this will fix your problem and be sure you get the onefor Mac And make it your Default Player
Cheers
Don

Firefox issue with website and feed updating

''Problems:''
I have been having this problem for a while. I provided links to pictures below.
I have one website that sometimes displays properly, while other times, it does not. Also, I have trouble viewing an updated rss feed using firefox. Problems '''cannot''' be replicated with other browsers.
''I have tried: ''
# clearing cache/cookies
# removing all plugins
# starting safe mode and resetting firefox parameters
# did virus/spyware scan
# and im sure other things as well
thanks for the help
problem: http://i56.tinypic.com/20qkikh.jpg
should be like this: http://i52.tinypic.com/2s8fddi.jpg

Very strange.
I had already cleared the recent history according to the instructions from Firefox. But they didn't specify/recommend to delete site preferences as well.
So I only did cache/cookies. Now I just deleted the site preferences and it worked.
thanks a lot for the help.

Issues with Recently added and recently played

When I sync my iPhone, my recently added and my recently played wont sync to my phone. Why?

More info?
Can those playlists be checked like the other playlists that are syncing to your phone?
Can the songs in those playlists even be played?
without that info I'd start with making sure iTunes is up-to-date or deleting and re-creating those playlists.
HT1801 shows how to create a smart playlists which is what each of those are.
"Recently Added" be default is stuff added in the last 2 weeks and "Recently Played" is any music played in the last 2 weeks.

Spotify issue with playlist adding

Hey i've been having a problem with adding new songs to my playlists. So whenever I try and add new songs to my playlist it gives me that notification that tells me I already have this song in my playlist. I thought this was weird since I had never played the song or added it to any of my playlists. So I went to my Starred and added the song to it and it told me that I already had it in when clearly it wasn't in my Starred. So i'm wondering if anyone else is having this problem? I hope yall understand what i'm saying xD.

What is the exact IE version you are currently using? and what version where you on prior to that?
See the following note:
[Note 325616 - ITS 6.20 System requirements|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=325616]
on the supported platforms and Web Browsers for the SAP Standalone ITS 6.20
The supported platforms and Web Browsers for the SAP Integrated
ITS 6.40 and higher are the same platforms supported by the SAP
Web Application Server. Have a look at http://service.sap.com/pam
for more information.

Issue with variables and white space in powershell script that calls a command line command

Guys,
I have a question regarding this script. Each time I run it, it creates the share, but with a space after it. Also I need help figuring out how to put in the variable for the folder path.
Below is the code
$Users=Import-Csv C:\users2.csv
foreach($User in $Users){
$User.SNCORP
$User.HPB
$User
cmd /c "net share "$User.SNCORP"=D:\Users\"$User.HPB" /grant:Everyone,FULL"
The csv file looks like this
HPB,SNCORP
ccarter,carterch$
This is my output in powershell
PS C:\> .\shareflip.ps1
carterch$
ccarter
HPB SNCORP
ccarter carterch$
The syntax of this command is:
NET SHARE
sharename
sharename=drive:path [/GRANT:user,[READ | CHANGE | FULL]]
[/USERS:number | /UNLIMITED]
[/REMARK:"text"]
[/CACHE:Manual | Documents| Programs | BranchCache | None]
sharename [/USERS:number | /UNLIMITED]
[/REMARK:"text"]
[/CACHE:Manual | Documents | Programs | BranchCache | None]
{sharename | devicename | drive:path} /DELETE
sharename \\computername /DELETE
Any help is greatly appreciated.
Christopher

There is no need to use cmd /c. You should be able to use:
net share "$($User.SNCORP)=D:\Users\$($User.HPB)" "/grant:Everyone,Full"
Use showargs.exe (from the article) at the beginning of this line to see the command line PowerShell is actually running (very useful for troubleshooting).
-- Bill Stewart [Bill_Stewart]

Issue with Query (Adding Columns)

Oracle: 10g
I have the following query:
select league_name, moniker, last_name, team_id, team_name, count(1) as Duplicates
from (
select players.league_name, players.moniker, players.last_name, players.player_id, players.team_id, players.team_name
from customer_data.cd_soccer_players players,
      select distinct league_id, player_id
      from (
        select league_id, player_id
        from customer_data.cd_soccer_ytd_player_stats ps
        where league_id in (22,64,39,80,49,51,58,140,54,135)
          and ps.season in (2008,2009)
        union
        select league_id, player_id
        from customer_data.cd_soccer_players pl
        where league_id in (22,64,39,80,49,51,58,140,54,135)
          and status='Y'
    ) player_universe
where player_universe.player_id = players.player_id
    and player_universe.league_id = players.league_id
order by last_name
group by league_name, moniker, last_name, team_id, team_name
having count(1) > 1
order by league_name, team_name, last_nameI'm trying to have the query include the column "player_id" in the output. The issue that I'm having is that if I add the player_id column at the top of the query I have to add it to the group by statement and if that happens I end up getting zero results back (w/out the column there I get back 9 results). Currently none of the player_ids have the same value which is why the get eliminated when I add the player_id to the group by clause. Is there anyway to tweak the query so I add player_id to the output w/out losing the integrity of the data?
Edited by: user652714 on Feb 18, 2009 8:11 AM
Edited by: user652714 on Feb 18, 2009 8:21 AM

I actually ended up finding a solution....this basically does the trick. If anyone has any better ways feel free to share.
select pl.league_name, pl.player_id,pl.player_id_1032, duplicates.moniker MONIKER, pl.moniker fn_2,
   duplicates.last_name LAST_NAME, pl.last_name ln_2
from customer_data.cd_soccer_players pl,
      select league_id, moniker, last_name, count(1) as DUPLICATES
      from (
        select players.league_id, players.moniker, players.last_name, players.player_id,players.player_id_1032, players.team_id
        from customer_data.cd_soccer_players players,
            select distinct league_id, player_id
            from (
              select league_id, player_id, player_id_1032
              from customer_data.cd_soccer_ytd_player_stats ps
              where league_id in (22,64,39,80,49,51,58,140,54,135)
                and ps.season in (2008,2009)
              union
              select league_id, player_id, player_id_1032
              from customer_data.cd_soccer_players pl
              where league_id in (22,64,39,80,49,51,58,140,54,135)
                and status='Y'
          ) player_universe
        where player_universe.player_id = players.player_id
          and player_universe.league_id = players.league_id
        order by last_name
      group by league_id, moniker, last_name
      having count(1) > 1
   ) duplicates
where pl.last_name = duplicates.last_name
and pl.moniker = duplicates.moniker
and pl.league_id = duplicates.league_id
and pl.status = 'Y'
union
select pl.league_name, pl.player_id,pl.player_id_1032, duplicates.moniker as MONIKER, pl.moniker as LAST_NAME,
   duplicates.last_name ln_1, pl.last_name ln_2
from customer_data.cd_soccer_players pl,
      select league_id, moniker, last_name, count(1) as DUPLICATES
      from (
        select players.league_id, players.moniker, players.last_name, players.player_id,players.player_id_1032, players.team_id
        from customer_data.cd_soccer_players players,
            select distinct league_id, player_id
            from (
              select league_id, player_id,player_id_1032
              from customer_data.cd_soccer_ytd_player_stats ps
              where league_id in (22,64,39,80,49,51,58,140,54,135)
                and ps.season in (2008,2009)
              union
              select league_id, player_id,player_id_1032
              from customer_data.cd_soccer_players pl
              where league_id in (22,64,39,80,49,51,58,140,54,135)
                and status='Y'
          ) player_universe
        where player_universe.player_id = players.player_id
          and player_universe.league_id = players.league_id
        order by last_name
      group by league_id, moniker, last_name
      having count(1) > 1
   ) duplicates
where pl.last_name = duplicates.last_name
and pl.moniker is null
and pl.league_id = duplicates.league_id
and pl.status = 'Y'
order by LAST_NAME, MONIKEr, league_nameEdited by: user652714 on Feb 18, 2009 9:48 AM

Load issues with Billing programs in background SDBILLDL or RV60SBT1

We are using SDBILLDL or RV60SBT1 to create billing docs in batch (scheduled background job).
This is not working well, when we have huge load.
Could you please suggest some solutions for this or the reasons for this.
Thanks,
Vinotha M

Hi
Pls let me know the actual error, what you are getting in the back ground job.
Pls also check the OSS note
Note 652219 - SDBILLDL cannot be executed in background
Pls take opinion from SAP / Basis, before implementing the note
Regards
Madhan D

Explorer Issues with Website Adding White Background

Similar Messages

Maybe you are looking for