Export a column to bibtex.bib with jquery

Hi,
Is it possible to create a link or button with jquery inside my content type(for example in the welcome page of the content type) that export the content of a column of this content type to a .bib file(for example bibtex.bib) ? user click on this link or
button and download this already created .bib file. if it is possible how can I achieve this?

The only content type that has a welcom page is the document set.
You'd then want a custom action on the ribbon to kick off a process that exports the data into a file and attempts to download it. It sounds like you're going to be pushing the limits of what jQuery is suitable for. It's brilliant for displaying content
but it's not typically used to create files for downloading.
You could gather the information from that column using the REST API, it's not the easiest to find guides on but this covers a lot of the basics:
http://www.c-sharpcorner.com/uploadfile/anavijai/rest-api-in-sharepoint-2010-for-listdata-svc-part-2/
Once you've got that data from the list you've got to create a file with that content in the appropriate format. Javascript normally doesn't have access to the file system, for good reason but there is a plugin here that might be of use:
http://jquery.tiddlywiki.org/twFile.html
Once the file has been created you'd need to kick off something that redirects the user to the download link but that's relateively straight forward.
Frankly i'd say managed code is the best option for this, while you might be able to manage it through jQuery and the CSOM it's far from the easiest option and not the one i'd follow. Encode the bibtex file generation process using C# and then call it using
a custom action.

Similar Messages

Exporting historical data to text file with MAX misses columns of data?

I am using Labview 7.1 with DSC module 7.1 and wants to export data to either excel format or .txt.
I have tried this with the historical data export in MAX, and also programmatically with the "write traces to spreadsheet file.vi" available in the DSC module. All my tags in my tag engine file (*.scf) are defined to log data and events. Both the update tag engine deadband and the update database are set to 0 %.
My exported excel or text file seems reasonalbe except that some columns of data are missing. I dont understand
why data from these tags are not in the exported files since they have the same setup in the (.scf) as other tags which are okay exported?
All defined tags can be seen using the NI hypertrend or MAX. Also the ones that are not correctly exported to file.
Appreciate comments on this.
Best regards,
Ingvald Bardsen

I am using LV and DSC 7.1 with PCI-6251 and max 4.2. In fact, just one column of values does not make sense. In attachment, follows the excel exported file. The last of column called ...V-002 that is the problem. I put probes for checking values but them shows correct. When the file is exported that to show values wrong.
The problem of missing values in column i solved putting 0% in field of deadband.
thank you for your help
Attachments:
qui, 2 de ago de 2007 - 132736.xls ‏21 KB

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome. Works in IE. This is my first time trying to post a question - so please be kind. I am also not good with code and am finding css a real challenge after learning to design based on tables. I'm using CS5.
The "test" page with the slide show is: http://www.reardanwa.com/index-slides.html   The same page without the slide show is http://www.reardanwa.com/
I realize the images are not ideally sized - I'll fix those once I get the pages to function. Maybe I need a different slide show? I would prefer a widget that I can modify to required size & postition. Again - I'm not good at building with code from scratch.
The problem is the naviagation links that are directly next to the slide show do not work in Firefox of Chrome. They do work in IE.
I've read about using jQuery.noConflict(); code but can't figure out the correct way to use it in my case or whether that's even part of the solution. I know my code is not well organized as I have cobbled together from various sources in an attempt to format the page the way the client wants it. Also, FYI, I will eventually try to make the page work in Surreal CMS.
I've spent sevaral days over the last several weeks trying to solve sth slide show/navigation conflict - so any specific light you can shed will be much appreciated.
Thanks in advance.
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Reardan Area Chamber of Commerce</title>
<meta name="description" content="home page for Reardan Area Chamber of Commerce" />
<meta name="keywords" content="Reardan WA, chamber of commerce" </>
<script src="scripts/jquery-1.6.min.js" type="text/javascript"></script>
<script src="scripts/jquery.cycle.all.js" type="text/javascript"> </script>
<script type="text/xml">
</script>
<style type="text/css">
                              #slideshow {
                                  padding: 10px;
                                        margin:0;
                              #slideshow-caption{
                                        padding:0;
                                        margin:0;
                              #slideshow img, #slideshow div {
                                  padding: 10px;
                                  background-color: #EEE;
                                  margin: 0;
body {
          font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
          background: #004B8D;
          margin: 0;
          padding: 0;
          color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
          padding: 0;
          margin: 0;
h1, h2, h3, h4, h5, h6, p {
          margin-top: 0;           /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
           /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
.left
position:absolute;
left:0px;
.center
margin:auto;
width:95%;
.box
          position:relative;
          left:-90px;
          width:950px;
          height:350px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          z-index:1000;
.slide{
    position:absolute;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
          border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
          color: #42413C;
          text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
          color: #6E6C64;
          text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
          text-decoration: none;
/* ~~this fixed width container surrounds the other divs~~ */
.container {
          width: 960px;
          min-height:900px;
          padding:5px 0px 0px 0px;
          background: #E8F8FF;
          margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
          background: #E8F8FF;
          padding:10px 5px 0px 5px;
.sidebar1 {
          float: left;
          width: 225px;
          margin: 60px;
          color: #FFFF0D;
          background: #595FFF;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
    z-index:-1;
.sidebar2 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:2;
.sidebar3 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:3;
.content {
          padding: 0px 0px 0px 0px;
          width: 780px;
          float: left;
          background: #E8F8FF;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
          padding: 0px 15px 5px 10px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
          list-style: none; /* this removes the list marker */
          border-top: 0px solid #FFFF66; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
          margin-bottom: 50px; /* this creates the space between the navigation on the content below */
          font: Arial Black, Verdana, , Helvetica, sans-serif;
          font-size:1.3em;
          font-weight:bold;
          z-index:2;
ul.nav li {
          border-bottom: 0px solid #FFFF66; /* this creates the button separation */
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
          padding: 3px 0px 5px 0px;
          display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
          width: 185px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
          text-decoration: none;
          color: #FFFF0D;
          background: #595FFF;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
          background: #595FFF;
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
          color: #FFFFFF;
/* ~~ The footer ~~ */
.footer {
          padding: 10px 0;
          background: #595FFF;
          color: #FFFF0D;
          position: relative;/* this gives IE6 hasLayout to properly clear */
          clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
          float: right;
          margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
          float: left;
          margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
          clear:both;
          height:0;
          font-size: 1px;
          line-height: 0px;
-->
</style>
</head>
<body>
<div class="container">
<div class="header">
<a href="#"><img src="images/Chamber-Logo-2.gif" alt="Reardan Chamber Logo" width="187" height="163" hspace="10" vspace="5" align="top" /></a><img src="images/Reardan-Chamber-Title.gif" width="476" height="204" alt="Reardan Area Chamber of Commerce, Dedicated to Preserving and Enhancing Area Businesses" /><p></p>
<p style="color: #F00">This Site is under construction! Please pardon our dust as we create!</p>
</div>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="about.html">About Us</a></li>
      <li><a href="history.html">Reardan History</a></li>
      <li><a href="activities.html">Activities</a></li>
      <li><a href="business.html">Business<br />
        Directory</a></li>
      <li><a href="about.html">Join the<br />
        Chamber</a></li>
       <li><a href="links.html">Links<br />
  <span style="font-size: 85%">Tourism</span><br />
      </a></li>
    </ul>
     </div>
<br />
<br />
<br />
<br />
<div class="box" +"slide">
<script type="text/javascript">
// BeginOAWidget_Instance_2559022: #slideshow
                           slideshowAddCaption=true;
$(window).load(function() {
$('#slideshow').cycle({
                    after:                              slideshowOnCycleAfter, //the function that is triggered after each transition
                    autostop:                              false,     // true to end slideshow after X transitions (where X == slide count)
                    fx:                                        'blindX',// name of transition effect
                    pause:                              false,     // true to enable pause on hover
                    randomizeEffects:          true, // valid when multiple effects are used; true to make the effect sequence random
                    speed:                              100, // speed of the transition (any valid fx speed value)
                    sync:                              true,     // true if in/out transitions should occur simultaneously
                    timeout:                    5000, // milliseconds between slide transitions (0 to disable auto advance)
                    fit:                              true,
                    height:                       '300px',
                    width:         '525px'   // container width (if the 'fit' option is true, the slides will be set to this width as well)
function slideshowOnCycleAfter() {
          if (slideshowAddCaption==true){
                              $('#slideshow-caption').html(this.title);
// EndOAWidget_Instance_2559022
</script>
<div id="slideshow">
    
    <img src="images/100_1537.jpeg" width="600" height="450" title="caption for image1" /> <img src="images/Parade-2011-2.jpg" width="300" height="225" title="caption for image2" /> <img src="images/100_1495.jpeg" width="600" height="450" title="caption for image3" />
    <div title="sample title"> Images for slide show will need to be re-sized to fit box to avoid distortion</div>
    <img src="images/beach4.jpg" width="200" height="200" title="caption for image4" /> <img src="images/beach5.jpg" width="200" height="200" title="caption for image5" /> </div>

<div id="slideshow-caption"></div></div>
<div class="sidebar2" "anotherClass editable"><p align="center"><strong>Chamber News</strong><br />
Local News item
<br />
Another New item</p>
<p align="center">lots of news this week<br />
    <br />
    <br />
    <br />
</p>
</div>
<div class="sidebar3" "anotherClass editable"><p align="center"><strong>Upcoming Events</strong></p>
<div align="center">    <a href="activities.html" style="color: #FFFF0D">Community wide yard sales</a><br />
    <br />
    <br />
    <br />
    <br />
</div>
</div>
<div class="content"><br />
<br />
</div>
<div class="footer">
        <p align="center"><span style="font-size: small">Reardan Area Chamber of Commerce</span><br />
          <span style="font-size: x-small">[email protected] - 509.796.2102</span><br />
        </p>
        
</div></body>
</html>

If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
    float: left;
    width: 225px;
    margin: 60px 0px 60px 60px;
    color: #FFFF0D;
    background: #595FFF;
    border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;

ALV GRID - export only columns not faded out

Hello,
I hope that this is possible but till now I have no idea.
The request is to provide a download/export function (moving the export file directly to a specific location the user is not allowed to modify-> so standard function not allowed based on specification) which will only export the columns from the ALV GRID which are not faded out.
With the standard files download from the menu bar this is possible.
But how to do this starting with a self defined button?
best regards
Dirk

hi,
if u need a custmozied button with all standard ALV fucntions,
1. goto <b>SE80</b>, under thre <b>function group SALV</b>, there will be <b>GUI_STATUS named as ST</b>ANDARD.
2. copy that into ur program, and add ur own button in that , then write the code for that by chekcing SY-UCOMM.
With Rgds,
S.Barani

Exporting lob columns...???

Is there any limitation of exporting LOB columns from client machines. If the client's export version is lower/greater, then is it going to affect the export of lob columns?

That's a bug. And even if the structure of the version you are dealing with is compatible, the functionality isn't. I suggest you to apply a patch to the client too.
Cause
This problem during export has been introduced with the 9.2.0.5 patchset. In that patchset, a fix has been included for Bug 2948717 "Queries against DBA_SEGMENTS can be slow accessing BYTES/BLOCKS/EXTENTS columns". Note that this fix has also been implemented in Oracle10g Release 1 (10.1.0.2.0).
As a result of that fix, an export from the 9.2.0.5.0 or any higher release database (e.g. 9.2.0.6.0 or 10.1.0.4.0) with a lower release export utility, e.g. 9.2.0.4.0 or 8.1.7.4.0 will now produce the EXP-3 error. For details see:
Bug 3593227 "EXP-3 WHEN EXPORTING A TABLE WITH MORE THAN 1 EXTENT USING EXP BELOW 9.2.0.5"
Bug 3784697 "EXPORT OF LOB FROM 9205 WITH PRE-9205 EXP GIVES EXP-3 (NO STORAGE DEF FOUND)"
These bugs were closed as a duplicate of:
Bug 3291851 "EXP-3: NO STORAGE DEFINITION FOUND FOR SEGMENT" (not a public bug)
Solution
The EXP-3 error only occurs when the export from the 9.2.0.5.0 or any higher release database (e.g. 9.2.0.6.0 or 10.1.0.4.0) is done with a lower release export utility, e.g. 9.2.0.4.0. The reason to run an export from a 9.2.0.5.0
or any higher release database (e.g. 9.2.0.6.0 or 10.1.0.4.0) with a 9.2.0.4.0 export utility, is to import the export dump file later into a target database of that lower release.
Note: if your intention is to export from a 9.2.0.6.0 database in order to import (back) into a 9.2.0.6.0 target database, there is no need to use a pre-9.2.0.5 release export utility. In that situation use the 9.2.0.6.0 export utility.
Workaround 1
Rerun the export and specify the parameter COMPRESS=Y (this is the default value for COMPRESS).
If you have a table with a secondary object, e.g. a LOB column, then this workaround might not work and you will re-produce the EXP-3 error during export. In that case, use workaround 2.
Workaround 2
a. Make a note of the export definition of exu9tne from $ORACLE_HOME/rdbms/admin/catexp.sql
b. Copy this to a new file and add:
"UNION ALL select * from sys.exu9tneb"
to the end of the definition
e.g. In the 9.2.0.5.0 or any higher release source database (e.g. 9.2.0.6.0 or 10.1.0.4.0), the workaround view would be:
CREATE OR REPLACE VIEW exu9tne (
tsno, fileno, blockno, length) AS
SELECT ts#, segfile#, segblock#, length
FROM sys.uet$
WHERE ext# = 1
UNION ALL
SELECT * from sys.exu9tneb
c. Run this as the SYS user (!) against the database that needs to be exported.
d. Re-run the export as required.
e. Put back the original definition of exu9tne as obtained in step a.
Note: only use this workaround when absolutely necessary, and don't forget to put back the original definition of the view SYS.exu9tne as mentioned in step e.

Need to update a single column in a table with some other column value

Hi experts,
I was about to change one column data type in a table. Then I renamed that column name to "old_column_name" . Later I added new column name with required datatype( My case its NCLOB). Now I want to update the new column value with old column value.I mean i have to copy the data. But data amount is very huge. Its more than 1.5 crores of data. But on promote day, I have only 1 hr of outage. Please suggest the effective solution to achieve this.

Hi Stew
I have 1 primary key in my table and 11 foreign keys in my table.there are 20 check constraints as well.
If i go for an online redefine of a table, these objects will be created back automatically?
Please clarify.
This is my table. Here Remarks is the column with CLOB datatype. To support multi language, I need to change it to NCLOB. That column having data so i cant rename it.
So I added new column , after renaming that remarks to old_remarks. Now new column remarks is ready with NCLOB data type, but no data in it.
To copy the old remarks column into new remarks column, i thought to write one script. But how it is achievable using "DBMS_REDEFINITION". Please explain me,
create table XXXXXXXXXX
ID NUMBER(8),
COMPLETED_DATE DATE,
COMMUNICATION_MEDIUM VARCHAR2(32),
REMARKS1 VARCHAR2(4000),
COPY VARCHAR2(1),
IO_MARKER VARCHAR2(3),
EVENT_DATE DATE,
CON_REF_NO NUMBER(8),
DEP_CODE VARCHAR2(6),
SFM_STAFF_NO NUMBER(8),
CRPD_ID NUMBER(8),
CRPD_ID_COPY NUMBER(8),
STATUS VARCHAR2(2),
COMEBACK_NO NUMBER(2),
ADD_ADD_ID NUMBER(10),
AEV_ID NUMBER(8),
OLAY_ID NUMBER(8),
COE_TYPE VARCHAR2(3),
CET_CODE VARCHAR2(6),
DEP_CODE_RAISED_BY VARCHAR2(6),
SFM_STAFF_NO_RAISED_BY NUMBER(8),
USR_CREATED VARCHAR2(30),
CREATED DATE,
USR_CHANGED VARCHAR2(30),
CHANGED DATE,
EXT_REF_ID VARCHAR2(150),
REPLY_EXPECTED_DATE DATE,
SEC_ID VARCHAR2(8) not null,
PROTECTED VARCHAR2(1),
APPROVED_BY NUMBER(8),
DOCUMENT BLOB,
OLD_REMARKS CLOB,
CTS_ID NUMBER(8),
MESSAGE_STATUS VARCHAR2(4),
WORD_DOCUMENT NCLOB,
REMARKS NCLOB
Edited by: Hema on Jul 2, 2012 8:31 AM
Edited by: Hema on Jul 2, 2012 8:31 AM

How can I export a smallformat flatten PDF-file with transparant parts in?

My post on a PDF - more clear with images (english):
http://www.logicontrol.be/gallery/documents/help-eng.pdf
Deze post in nederlandstalige versie:
http://www.logicontrol.be/gallery/documents/help-nl.pdf
Scope?
I'dd like to export an Indesign-file (.indd) to a PDF-file that has to be:
- the smallest possible file size
- which displays images and text sharp on the screen
- which also certainly remain transparent parts of .psd-files after exporting
- that is flattened for easy print
The problem?
▪ How and with which of settings can I export such a file from InDesign 5.0?
▪ If necessary in combination with some settings (after exporting) in our Adobe Acrobat 9 Pro?
Further explanation
The export file contains lots of text, graphics, photographs and drawings. Many of these items are .psd-files that contain transparent areas. The intention is that this transparent parts actually remain transparent even after exporting/flattening /decreasing the PDF.
▪ With InDesign 5.0?
→ In the window Export Adobe PDF: (images see: http://www.logicontrol.be/gallery/documents/help-eng.pdf )
Should I start from a default PDF preset   (if yes > which one??)
Possibilities are: High Quality Print / PDFX-1a: 2001 / PDFX-3:2002 / PDFX-4:2007 / Press Quality / Smallest File Size
Or is it better to create a PDF preset on my own?     (if yes > which settings??)
Standard > PDF/X-format?
Compatibility > PDF-version?
Compression > If artwork should be compressed and downsampled, and if so,
                        which method and settings to I have to use ?
Ouput > How can I control colors and PDF/X output intent profiles in the PDF-file?
Advanced > How can I control fonts, OPI specifications, transparency flattening, and JDF instructions are
                  in the PDF file?
▪ With Adobe Acrobat 9 Pro?
→ How can I reduce the file size extra, so more reducing after exporting into PDF ?
→ How can I flatten the exported file (if not done during the export) ?
!! Important, when I export/reduce/flatten the file, I ‘dd like that the parts of images who were transparent before, stays also transparent after !!
WHAT CAN I DO ??

Hello,
I'm sorry you're having trouble. Unfortunately, this forum is for the ExportPDF service of Acrobat.com. The ExportPDF service functions as a PDF to *.docx file convertion and we can't help with problems specific to the desktop version of Acrobat or InDesign. I'm happy to point you in the right direction.
Acrobat Users moderated forums:
http://forums.adobe.com/community/acrobat
InDesign forums:
http://forums.adobe.com/community/indesign/indesign_general
Good luck!

Export data from BW to oralce with open hub service.

Hi Dear all,
When I tried to export data from BW to oralce with open hub service. There is no available RFC destination for this oracle system. That means i need to create a RFC destination for the oracle server.
How can i achive this, in SM59? But U don't know much how to configure this. Is there any expert can help me there?
Kevin

Hi kevinhuang ,
RFC connection.......... You can check in SM59 tcode...Double click on the the desired Source system
or
RSA1-->Source systems and then right click on Source system and Check
To test RFC connection...RSA1 ....Source system....... Right click on desired source system >> Connection Parameter.....Test connection
Pls go thru this links,
http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
BI Open Hub Destination and data transfer process setup
http://www.ibm.com/developerworks/data/library/techarticle/dm-0802li/index.html
Hope this helps U.
Regards
Chandra Sekhar
Edited by: Chandra Sekhar T on Apr 21, 2009 3:36 PM

Calling Reporting Services Web Service with jQuery possible?

Hi,
is it possible to call the Reporting Services Web Service with jQuery? If yes, can someone post me a small example?
Background:
My plan is to create a html with a form which is also uploaded then into the reportserver. I open this html later by clicking a link in a report (with gotoURL open.window). The report opens the html inclusive the overtaken of some additional parameters
(reportname, reportdescription). These parameters I will use in the html-form as defaultvalues for the corresponding input-text-fields. Now the user can make some changes (i.e. the decription). With a click on a button I will send the new description to
the Reporting Services Web Service by using the SetProperties method, closing the html-window and reload the report. Important is that I want to upload the html also into the reportserver itself.
I have already found how to consume a web service via jQuery but with the Reporting Services Web Service I did not get it running in my tests.
I have referenced to the following jQuery.js: http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js
Here you can see my tests I made with the results:
$.ajax({
type: 'POST',
url: 'http://<..>/ReportServer/ReportService2010.asmx/ListChildren',
data: {'ItemPath':'/','Recursive':false},
complete: function(xData, status) {
$('p').html($(xData.responseXML).text()); // result
$("#divStatus").text( status ); // status }
I got a NULL response with Status success. But where are the items?
Another test which should response only one value was that:
$.ajax({
type: "POST",
contentType: "text/xml; charset=utf-8",
url: "http://<..>/ReportServer/ReportService2010.asmx/GetItemType",
data: {"Item":"/Development"}, // Development is a Folder in my Reportserver-Root
dataType: "xml",
success: function (msg) {
$("#divResult").html(msg.responseXML);
error: function (data, status, error) {
$("#divResult").html("WebSerivce unreachable<br> <br>" + data.responseXML + "<br> <br>(" + error + ")");
Here I got an [object Error]
And here my last test:
var soapMessage = '<?xml version="1.0" encoding="utf-8"?>\
<soap:Envelope \
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" \
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" \
xmlns:xsd="http://www.w3.org/2001/XMLSchema">\
<soap:Body>\
<GetItemType xmlns="http://www.microsoft.com/sql/ReportingServer">\
<ItemPath>/Development</ItemPath>\
</GetItemType>\
</soap:Body>\
</soap:Envelope>';
$.ajax({
type: "POST",
contentType: "text/xml; charset=utf-8",
url: http://<..>/ReportServer/ReportService2010.asmx?wsdl,
data: soapMessage,
dataType: "xml",
success: processSuccess,
error: processError
function processSuccess(data, status, req) {
if (status == "success")
$("#response").text($(req.responseXML).find("Type").text());
function processError(data, status, req) {
alert(req.responseText + " " + status);
Here I got an "Undefined error"
Can anyone help me?
Thanks
René Illner

Hi Rene,
I have one vbscript class to call web services. May be if you need you can use it.
     dim ws
     set ws = new webservice
     ws.url = "http://servername/ReportServer/ReportService2010.asmx"
     ws.method = "MethodName"
     ws.parameters.Add "Parameter1", "Param1 Desc.."
     ws.parameters.Add "Parameter2","[email protected].."
     ws.execute
     set ws = nothing
'------web service calling class
class WebService
public Url
public Method
public Response
public Parameters
public function execute()
    dim xmlhttp
    Set xmlhttp = CreateObject("Microsoft.XMLHTTP")
    xmlhttp.open "POST", Url & "/" & Method, false
    xmlhttp.setRequestHeader "Content-Type", "application/x-www-form-urlencoded"
    xmlhttp.send Parameters.toString
    response = xmlhttp.responseText
    set xmlhttp = nothing
end function
Private Sub Class_Initialize()
    Set Parameters = new wsParameters
End Sub
Private Sub Class_Terminate()
    Set Parameters = Nothing
End Sub
End class
class wsParameters
public mCol
public function toString()
    dim nItem
    dim buffer
    buffer = ""
    for nItem = 1 to Count
      buffer = buffer & Item(nItem).toString & "&"
    next
    if right(buffer,1)="&" then
      buffer = left(buffer,len(buffer)-1)
    end if
    toString = buffer
end function
public sub Clear
    set mcol = nothing
    Set mCol = CreateObject("Scripting.Dictionary")
end sub
public sub Add(pKey,pValue)
    dim newParameter
    set newParameter = new wsParameter
    newParameter.Key = pKey
    newParameter.Value = pValue
    mCol.Add mCol.count+1, newParameter
    set newParameter = nothing
end sub
public function Item(nKey)
    set Item=mCol.Item(nKey)
end function
public function ExistsXKey(pKey)
    dim nItem
    for nItem = 1 to mcol.count
      if mCol.Item(nItem).key = pKey then
        ExistsXKeyword = true
        exit for
      end if
    next
end function
public sub Remove(nKey)
    mCol.Remove(nKey)
end sub
public function Count()
    Count=mCol.count
end function
Private Sub Class_Initialize()
    Set mCol = CreateObject("Scripting.Dictionary")
End Sub
Private Sub Class_Terminate()
    Set mCol = Nothing
End Sub
end class
class wsParameter
   public Key
   public Value
   public function toString()
     toString = Key & "=" & Value
   end function
end class
Regards, RSingh

Export in column format

Dear Gurus,
What if i check the option export in column format while export the database?
Thanks,
Sekhar

Hi,
Adding to the John comments,
If you export the database in the column format the size of the export file will be much more than the data in the cubes.
I had an experience where I used to export the data in column format which results in a file which was
twice the size of the file without the column format.
If you have a lot of data in essbase cubes, I advice you to export data in non columnar format in order to save the disk space.
Thanks,
Sourabh

Unable to export all columns from sharepoint 2010 survey

Have a user that cannot export all columns from a sharepoint survey. When exported, he only gets 3 columns. We've tried a number of things, including exporting from the overview view. We've also made sure that readers had full edit rights, etc. Just for
background, this survey does contain branching logic. Any ideas?

I have had
exactly the same problem before.
There's already a ton of suggestions on these blogs, and I suspect there is a bug somewhere.
As I'm lucky to have Reporting Services in SharePoint mode, I've been using it to export Survey data, pre-process it, and export it to Excel or PDF.

User Login with jquery mobile

I have this code that works perfectly but when i embed with Jquery mobile it fails to work. its a user authenication code
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>

<%
    ' *** Validate request to log in to this site.
    MM_LoginAction = Request.ServerVariables("URL")
    If Request.QueryString <> "" Then MM_LoginAction = MM_LoginAction + "?" + Server.HTMLEncode(Request.QueryString)
    MM_valUsername = CStr(Request.Form("username"))
    If MM_valUsername <> "" Then
        Dim MM_fldUserAuthorization
        Dim MM_redirectLoginSuccess
        Dim MM_redirectLoginFailed
        Dim MM_loginSQL
        Dim MM_rsUser
        Dim MM_rsUser_cmd
        MM_fldUserAuthorization = ""
        MM_redirectLoginSuccess = "source.asp"
        MM_redirectLoginFailed = "error.asp"
        MM_loginSQL = "SELECT Username, Password"
        If MM_fldUserAuthorization <> "" Then MM_loginSQL = MM_loginSQL & "," & MM_fldUserAuthorization
        MM_loginSQL = MM_loginSQL & " FROM dbo.Test_Register_Users WHERE Username = ? AND Password = ?"
        Set MM_rsUser_cmd = Server.CreateObject ("ADODB.Command")
        MM_rsUser_cmd.ActiveConnection = MM_VT_STRING
        MM_rsUser_cmd.CommandText = MM_loginSQL
        MM_rsUser_cmd.Parameters.Append MM_rsUser_cmd.CreateParameter("param1", 200, 1, 70, MM_valUsername) ' adVarChar
        MM_rsUser_cmd.Parameters.Append MM_rsUser_cmd.CreateParameter("param2", 200, 1, 50, Request.Form("password")) ' adVarChar
        MM_rsUser_cmd.Prepared = true
        Set MM_rsUser = MM_rsUser_cmd.Execute
        If Not MM_rsUser.EOF Or Not MM_rsUser.BOF Then
            ' username and password match - this is a valid user
            Session("MM_Username") = MM_valUsername
            If (MM_fldUserAuthorization <> "") Then
                Session("MM_UserAuthorization") = CStr(MM_rsUser.Fields.Item(MM_fldUserAuthorization).Value)
            Else
                Session("MM_UserAuthorization") = ""
            End If
            if CStr(Request.QueryString("accessdenied")) <> "" And true Then
                MM_redirectLoginSuccess = Request.QueryString("accessdenied")
            End If
            MM_rsUser.Close
            Response.Redirect(MM_redirectLoginSuccess)
        End If
        MM_rsUser.Close
        Response.Redirect(MM_redirectLoginFailed)
    End If
%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<link href="http://code.jquery.com/mobile/1.0/jquery.mobile-1.0.min.css" rel="stylesheet" type="text/css" />
<script src="http://code.jquery.com/jquery-1.6.4.min.js" type="text/javascript"></script>
<script src="http://code.jquery.com/mobile/1.0/jquery.mobile-1.0.min.js" type="text/javascript"></script>
</head>
<body>
<div data-role="page" id="page">
<div data-role="header">
    <h1>Header</h1>
</div>
<div data-role="content">
    <form id="form1" name="form1" method="POST" action="login_code.asp">
      <table width="325" border="0" cellpadding="3" cellspacing="3">
        <tr>
          <td width="94"> </td>
          <td width="210"> </td>
        </tr>
        <tr>
          <td>Username</td>
          <td><input type="text" name="username" id="username" /></td>
        </tr>
        <tr>
          <td>Password</td>
          <td><input type="text" name="password" id="password" /></td>
        </tr>
        <tr>
          <td colspan="2"><div align="center">
            <input type="submit" name="button" id="button" value="Submit" />
          </div></td>
        </tr>
      </table>
    </form>
</div>
<div data-role="footer">
    <h4>Footer</h4>
</div>
</div>
</body>
</html>

"Fails to work" in what way?

Export List Of Images Selected Along With Some MetaData

It would be extremely beneficial for LightRoom to have the ability to have an Export feature that creates an ASCII or XML file format (or other common format) of the image file names (and path) that are highlighted/selected. Since LightRoom is a great program that can be used for client previews, this export feature would allow future integration with billing packages to complete the order.
Ideally the export file would contain the selected image path and file name, and metadata such as cropping size selected (especially if selected from the drop-down selection of crop sizes), keyword tags (and/or folder name), title, rating and label.
Thank you for your consideration of this feature request.

I definitely need something similar as well.
E.g. I have a website with a slideshow functionality in it - it would be really useful to export in a textfile the custom order of the pictures prepared for a new slideshow.

Having trouble with jQuery toggle row to work right

The results appear in a table and each row when clicked on shows detailed information. I'm trying to use the jQuery toggle so it can open the detail information under the persons name.
The jQuery code I have is this...
<script>
$(document).ready(function() {
     $("#title").click(function() {
     $("#detail").toggle();
</script>
Then my cfoutput table is this...
<table>
<thead>
<tr><th>First Name</th></tr>
</thead>
<tbody>
<cfoutput query="getRecords">
<tr>
<td id="title">#getRecords.firstN#</td>
</tr>
<tr>
<td id="detail"><cfdiv bind="url:details.cfm?firstN=#firstN#" /></td>
</tr>
</cfoutput>
</tbody>
</table>
Now what happens with that is all the detail records show up with the name and only the first row can toggle. Everything else doesn't do anything. Also is there a way to have the toggle show as closed first? Thank you so much for any help with this.

This is because you are referencing an ID with jQuery. An ID has to be unique, only one can exist, and after you create multiple cells with the same ID, jQuery just takes the first one.
You will be better off using a class instead. So you can change you jQuery to look like this:
$(document).ready(function() {
     $(".title").click(function() {
          $(this).parent().next().find('td').toggle();
This will get the current clicked cells parent row, then go to the next row and look for the cell, then it will toggle.
You then need to change your HTML to be something like this:
<cfoutput query="getRecords">
    <tr>
        <td class="title">#getRecords.firstN#</td>
    </tr>
    <tr>
        <td class="detail"><cfdiv bind="url:details.cfm?firstN=#firstN#" /></td>
    </tr>
</cfoutput>
If you want to hide the detail cell first you can add some CSS to the detail class like so:
.detail {
     display:none;
Here is an example of it all - JSFiddle

How to encrypt column of some table with the single method on oracle7/814?

How to encrypt column of some table with the single method on oracle7/814?

How to encrypt column of some table with the single method on oracle7/814?

Export a column to bibtex.bib with jquery

Similar Messages

Maybe you are looking for