Exporting historical data to text file with MAX misses columns of data?

I am using Labview 7.1 with DSC module 7.1 and wants to export data to either excel format or .txt.
I have tried this with the historical data export in MAX, and also programmatically with the "write traces to spreadsheet file.vi" available in the DSC module. All my tags in my tag engine file (*.scf) are defined to log data and events. Both the update tag engine deadband and the update database are set to 0 %.
My exported excel or text file seems reasonalbe except that some columns of data are missing. I dont understand
why data from these tags are not in the exported files since they have the same setup in the (.scf) as other tags which are okay exported?
All defined tags can be seen using the NI hypertrend or MAX. Also the ones that are not correctly exported to file.
Appreciate comments on this.
Best regards,
Ingvald Bardsen

I am using LV and DSC 7.1 with PCI-6251 and max 4.2. In fact, just one column of values does not make sense. In attachment, follows the excel exported file. The last of column called ...V-002 that is the problem. I put probes for checking values but them shows correct. When the file is exported that to show values wrong.
The problem of missing values in column i solved putting 0% in field of deadband.
thank you for your help
Attachments:
qui, 2 de ago de 2007 - 132736.xls ‏21 KB

Similar Messages

How to Write Waveform graph data to Text File with user option to do so

So, I'm new to labview and am having trouble writing one program in particular. I have a waveform graph that runs for 120 seconds generating a sine curve. I am, however, having a difficult time getting the program to write the x and y coordinates into a text file. I have attached what I have so far.
The first task I was assigned was to write a program that creates a snusoidal curve on the front pannel adding one data point each half second for 120 seconds. The plot should only start when the user presses a start button.
The next part involves giving the user an option to write the generated data to a spreadsheet file called "sine.txt". The file name and location should be hardcoded. The file should contain the x and y coordinates of each data point in columns separated by tabs, also known as delimited.
I have spent several hours tweaking the attached program and I just can't seem to get it to work right. Any suggestions would help at this point.
Sincerely,
A frustrated chemistry student whose research mentor is out of town
Solved!
Go to Solution.
Attachments:
Sinusoidal Curve (saving to excel).vi ‏45 KB

First, you are not creating Excel files. You are creating text files. And it seems that your Write to file is already creating X (time) vs. Y (data curve) that is tab delimited.
Everything else you are doing is just too complicated or a Rube Goldberg.
All you need is the attached.
Attachments:
Sinusoidal_Curve_(saving_to_Text_file).vi ‏69 KB

Data getting truncated while exporting report to a text file in crystal 10?

Hi All,
I am using crystal 10.When exporting report to a text file ,a dialog prompts asking for Character perinch with a default value 9.If I change the value from 9 to 16 i am getting the correct data(that means character per inch value is 16) and it update "CharPerInch" value in registry under following location to 16.
HKEY_CURRENT_USER\Software\Crystal Decisions\10.0\Crystal Reports\Export\Text
The dialog asked for character per inch also has option to select not to prompt again and i also selected that in first go.
When i export the report again in text format it didn't prompt for number of character per inch but the data gets truncated.
What i believe is even though it updates entry in registry and reads, it is not using the same value for export. It never consider the value that is in registry, if the check box is not selected then it is using the value entered in the dialog and if the check box is selected then in the next run it uses the default value as 9.
Can anyone suggest me how to override this problem ? Is there any other setting place in registry where i can enter the number of character per inch.I don't want to crystal to prompt always for character per inch.

Hi Venkateswaran,
The other option to avoid truncation of the data could be
Right click the text filed
Click on Format Text to open the Format Editor
On Common tab check the text box for Can Grow.
This will prevent the data from truncating in preview as well as while exporting to text.
Otherwise you will have to set the characters per inch to 16 each time. I donu2019t see changing the registry value causing any difference here.
Regards,
Aditya Joshi

Export Excel Table in .txt File with space delimited text in UNICODE Format

Hi all
I've a big unsolved problem: I would like to convert an Excel table with some laboratory data in it (descriptions as text, numbers, variables with some GREEK LETTERS, ...). The output should be a formatted text with a clear structure. A very good solution is
given by the converter in Excel "Save As" .prn File. All works fine, the formattation is perfect (it does not matter if some parts are cutted because are too long), but unfortunately the greek letters are converted into "?"!!!
I've tried to convert my .xlsx File in .txt File with formatting Unicode and the greek letters are still there! But in this case the format is not good, the structure of a table is gone!
Do you know how to save an Excel file in .prn but with Unicode formatting instead of ANSI or a .txt with space delimited text?
Thanks a lot to everyone that can help me!
M.L.C.

This solution works in Excel/Access 2013.
Link the Excel table into Access.
In Access, right-click the linked table in the Navigation Pane, point your mouse cursor to "Export", and then choose "Text File" in the sub-menu.
Name the file, and then under "Specify export options", check "Export data with formatting and layout". Click "OK".
Choose either Unicode or Unicode (UTF-8) encoding. Click "OK".
Click "Close" to complete the export operation.

Export data into text file

Hi all,
I want to export table data into a delimeted text file with SQL*Plus.
[edit]
Sorry, non delimited text file
[edit]
Example:
CREATE TABLE delim (
col_a VARCHAR2(20),
col_b VARCHAR2(40)
value stored in
col_a = FISH_1
col_b = FISH_2
spool x:\test_1.lst
set feedback off;
set HEADING off;
set pagesize 0;
set linesize 60;
select col_a, col_b
from table delim;
spool off;
=>
FISH_1
FISH_2
When I now do the same with
set linesize 62;
the reslut is like this
=>
FISH_1 FISH_2
In the output of the second example there is a blank between col_a and col_b.
I have to export the column data without this one blank between columns.
Is there any way to do this?
Thanks and cheers,
ben
Message was edited by:
ben512

Well in your example there is one space between the two columns, anyway you can see in my previous example that there is a set colsep and that show what you want.
But here is another example:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> create table test (
2 col_a VARCHAR2(5),
3 col_b VARCHAR2(3)
4 );
Table created.
SQL>
SQL> insert into test (col_a, col_b)
2 values('abc', 'FA');
1 row created.
SQL>
SQL> insert into test (col_a, col_b)
2 values('def', 'KL');
1 row created.
SQL> insert into test values ('12345','123');
1 row created.
SQL> rem if you don't want to have a space between the two columns then
SQL> set head off
SQL> set colsep ""
SQL> select col_a, col_b from test;
abc FA
def KL
12345123
SQL> rem if you want to have one space between the two columns then
SQL> set colsep " "
SQL> select col_a, col_b from test;
abc FA
def KL
12345 123
SQL>

Exporting text files with song names and artist names only

I need help exporting a playlist as a text file. I know how to do this already,(right click playlist and select "export song list...") but when i open it up in notepad, it is unorganized and is very hard to read. I am burning a disc for my mom and pasting the playlist on the back of the cd cover. I dont want to type out every artist and song name. Help is appreciated.

do you have a copy of Excel (or a different spreadsheet) on the PC, kevin? if so, try opening the text file with that. then it's relatively easy to remove information by deleting the columns of info that you don't want.

How to export bulk data in text file

Dear,
We have an requirement to get data from GL CONTAINING below tables, but it's taking lot of time, could you share the best way to get data in text file as quick as possiable.
from gl_je_headers_v,gl_je_lines,GL_JE_CATEGORIES
,gl_code_combinations_v
where gl_je_headers_v.je_header_id = gl_je_lines.je_header_id
AND GL_JE_CATEGORIES.je_category_name = gl_je_headers_v.je_category
and gl_code_combinations_v.CODE_COMBINATION_ID =
gl_je_lines.code_combination_id
and gl_code_combinations_v.CHART_OF_ACCOUNTS_ID = 50349
AND gl_je_headers_v.PERIOD_NAME = 'SEP-2012'

it's based on formatting data in text file
you can use utl_file but it's row by row process your data
you can try spool
as example
spool c:\tmp\myfile.txt
select *
from emp;
spool off;or try export for example in sql developer

How to extract data from text file to database table

Hi ,
I am trying to upload data in text file to database table using GUI_UPLOAD function .what would be the program for that.
thanks in advance.

Hi,
I don't think you have a standard sap program to upload data from file to database table...
Instead you can create a custom program like this..
DATA: T_FILEDATA(1000) OCCURS 0 WITH HEADER LINE.
DATA: T_ZTABLE LIKE ZTABLE OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      = 'C:\TEST.TXT'
tables
    data_tab                      = T_FILEDATA
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT T_FILEDATA.
T_ZTABLE = T_FILEDATA.
APPEND T_ZTABLE.
ENDLOOP.
MODIFY ZTABLE FROM TABLE T_ZTABLE.
COMMIT WORK..
Thanks,
Naren

Spool SQl data into text file using dynamic sql

Hi,
I am spooling output data into text file using command
select 'select t.mxname,bo.lxtype,t.mxrev'||chr(10)||'from mx_1234567'||chr(10)||
'where <condition>';
here mxname varchar(128),lxtype(128),mxrev(128) all are of varchar type.I want the output in format
e.g Part|1211121313|A
but due to column width the output,I am getting is with spaces.
"Part then blank spaces |1211121313 then blank spaces |A"
how can I remove these spaces between columns.I used set space 0 but not working.
Thanks in advance.
Your help will be appreciated.

Hi Frank,
I have seen your reply for SET LINE SIZE function. But, I could not be able to understand it.
I am facing similar kind of issue in my present project.
I am trying spool more than 50 columns from a table into flat file. Because of more column lengths in few columns, i am getting space. There are so many columns with the same issue. I want to remove that space.so that, data can fit perfectly in one line in .txt file without any wrap text.
Below is my sample query.sql. Please let me know the syntax. My mail id : [email protected]
--Created : Sep 22,2008, Created By : Srinivasa Bojja
--Export all Fulfillments
--Scheduled daily after 1:00am and should complete before 3:30am
WHENEVER SQLERROR EXIT SQL.SQLCODE
SET LINESIZE 800
SET WRAP OFF
SET PAGESIZE 800
SET FEEDBACK OFF
SET HEADING ON
SET ECHO OFF
SET CONCAT OFF
SET COLSEP '|'
SET UNDERLINE OFF
SPOOL C:\Fulfillment.txt;
SELECT SRV.COMM_METHOD_CD AS Method,
SRV.SR_NUM AS "Fulfillment Row_Id",
CON.LAST_NAME AS "Filled By"
SRV.SR_TITLE AS Notes,
SRVXM.ATTRIB_04 AS "Form Description"
FROM SIEBEL.S_SRV_REQ SRV,
SIEBEL.S_SRV_REQ_XM SRVXM,
SIEBEL.S_USER USR,
SIEBEL.S_CONTACT CON
WHERE SRV.ROW_ID = SRVXM.PAR_ROW_ID AND
SRV.OWNER_EMP_ID = USR.ROW_ID AND
CON.ROW_ID= SRV.CST_CON_ID;
SPOOL OFF;
EXIT;

How to generate a text file with values from internal table

hi,
can anybody help me out to get the values from different internal table written into a text file.
regs,
raja

used gui_download,ws_download,cl_gui_file_save.
data: ld_filename type string ;
ld_filename = 'c:\demo.txt'.
DATA: begin of it_datatab occurs 0,
row(500) type c,
end of it_datatab.
HII
call function 'GUI_DOWNLOAD'
exporting
filename = ld_filename
filetype = 'ASC'
tables
data_tab = it_datatab[]
exceptions
file_open_error = 1
file_write_error = 2
others = 3.
gui_download

Unable to find file error while loading data from text file to Oracle

Hi,
I am having a interface where i am loading a data of Text file to Oracle.
But when i am trying to do this i am getting following error.
ODI-1227: Task SrcSet0 (Loading) fails on the source FILE connection SAPMM.
Caused By: java.sql.SQLException: File not found: d:/mdb/#General.get_filename
     at com.sunopsis.jdbc.driver.file.FileResultSet.<init>(FileResultSet.java:160)
     at com.sunopsis.jdbc.driver.file.impl.commands.CommandSelect.execute(CommandSelect.java:57)
     at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
SAPMM is connection name.
I am using get_filename to get the filename and it is fetching correct value as the this variable refreshes in previous step of this interface.
KM used for loading is File to SQL
What would be cause of this error?
Thanks,
Mahesh

Hi,
Did a testing and following are the result
I have
A> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Execution of Interface which gets the file name from v_filename and load into target table
Package executes successfully.
B> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Scenario of Interface which gets the file name from v_filename and load into target table
Package executes with erre as it is not able to find the file
C> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Execution of Interface which gets the file name from v_filename and load into target table
4. Now create a scenario of the package , use the generated scenario in another package say main_package
Execution of main_package is successful.
Thanks,
Sutirtha

Reading dilimited input from a text file with tokenizer

i am trying to read in a text file with the following structure: 2 integers on each line with comma as the delimitor.
i am using the BufferedReader stream and Tokenizer to detect ",".
try {
BufferedReader in = new BufferedReader(new FileReader(filename));
//read in the data file
while ((s = in.readLine())!= null) {
int i = 0;
for (i = 0; i < 100; i++) {
t = new StringTokenizer(s,",");
A1 = Integer.parseInt(t.nextToken());
catch (IOException e) {System.err.println(e);}
When i print out A1[i], it only reads the last line of the text file. Please tell me what's wrong.
Also i'd really like A1[i] to store the integer before the comma and another array A2[i] to store the integer after the comma. Please help.
Thanks.
p.s. A1 and A2 are arrays...when i previewd message in Netscape 7 it left out the brackets and the index....

What is the for i loop for? If it is to read the next line from the file, then the while loop has taken care of it. Other than this there should be no problem with the rest of the code.
Just add another line to store the next token into A2.

Importing text file with variable spaces

Hi all
I have a text file with a varying amount of spaces in it. Typical output from the file is attached.
How can I separate the values into separate columns please?
Thanks in advance.

You're going to need some substrings:
DECLARE @flatFileLine VARCHAR(MAX) = '2002 01118511 0.00 0 0.00 0.00 PENDING '
SELECT
SUBSTRING(@flatFileLine,1,4),SUBSTRING(@flatFileLine,5,17),SUBSTRING(@flatFileLine,22,17),SUBSTRING(@flatFileLine,39,17),SUBSTRING(@flatFileLine,56,17),SUBSTRING(@flatFileLine,73,17),SUBSTRING(@flatFileLine,90,17)

Export Screen to Flat Text file

Hello,
I'm very new in SAP and need to modify a little program.
I would like to export the current screen in a flat text file.
The file must be stored on the SAP server ( /usr/sap/data/bel) so not on my local harddrive.
I searched and found found functions like WS_download and GUI_download, but I'm not sure how to use them. Can somebody help me please?
Curent Code of my report:
REPORT ZAT_CLRDEP01.
Tables declaration
tables : vbrp,bkpf,bseg.
Data declaration
data: begin of itab1 occurs 0,
          vbeln like vbrp-vbeln,
          arktx like vbrp-arktx,
          belnr like bkpf-belnr,
      end of itab1.
data: begin of itab2 occurs 0,
          vbeln like vbrp-vbeln,
          arktx like vbrp-arktx,
          belnr like bkpf-belnr,
      end of itab2.
data: begin of itab3 occurs 0,
          kunnr like bseg-kunnr,
          name1 like kna1-name1,
          vbeln like vbrp-vbeln,
          zfbdt like bseg-zfbdt,
          belnr like bkpf-belnr,
          augcp like bseg-augcp,
          augbl like bseg-augbl,
          arktx like vbrp-arktx,
      end of itab3.
data: begin of itab4 occurs 0,
          kunnr like bseg-kunnr,
          name1 like kna1-name1,
          vbeln like vbrp-vbeln,
          zfbdt like bseg-zfbdt,
          augcp like bseg-augcp,
          augbl like bseg-augbl,
          arktx like vbrp-arktx,
          pswbt like bseg-pswbt,
      end of itab4.
data: vbeln_tst like vbrp-vbeln.
Selections
parameters accgrp like vbrp-ktgrm default '03' obligatory.
parameters compcde like bkpf-bukrs default 'LOI' obligatory.
select-options: billdoc for vbrp-vbeln.
select-options: customer for bseg-kunnr.
select-options: fiscyear for bkpf-gjahr.
select-options: reldate for bseg-augcp.
select-options amount for bseg-pswbt.
INITIALIZATION.
fiscyear-low = sy-datum(4).
fiscyear-high = sy-datum(4).
append fiscyear.
reldate-high = sy-datum.
append reldate.
amount-low = '100'.
amount-high = '2000'.
append amount.
START-OF-SELECTION.
refresh: itab1,itab2,itab3,itab4.
clear : itab1,itab2,itab3,itab4.
clear: vbeln_tst.
select * into corresponding fields of table itab1
    from vbrp inner join bkpf
    on    vbrpmandt = bkpfmandt
      and vbrpvbeln = bkpfxblnr
    where vbrp~ktgrm = accgrp
      and bkpf~bukrs = compcde
      and bkpf~gjahr = fiscyear.
loop at itab1.
    if itab1-vbeln ne vbeln_tst.
      move itab1-belnr to itab2-belnr.
      move itab1-vbeln to itab2-vbeln.
      move itab1-arktx to itab2-arktx.
      append itab2.
    endif.
    vbeln_tst = itab1-vbeln.
endloop.
loop at itab2.
    select * from bseg
                  where bukrs = compcde
                    and belnr = itab2-belnr
                    and gjahr = fiscyear
                    and buzei = '001'
                    and augcp in reldate
                    and augbl ne ''
                    and vbeln in billdoc
                    and kunnr in customer.
      if sy-subrc = 0.
        move itab2-belnr to itab3-belnr.
        move bseg-kunnr to itab3-kunnr.
        select single name1 from kna1
                      into itab3-name1
             where kunnr = itab3-kunnr.
        move itab2-vbeln to itab3-vbeln.
        move bseg-zfbdt to itab3-zfbdt.
        move bseg-augcp to itab3-augcp.
        move bseg-augbl to itab3-augbl.
        move itab2-arktx to itab3-arktx.
        append itab3.
      endif.
    endselect.
endloop.
loop at itab3.
    select * from bseg
                where bukrs = compcde
                  and belnr = itab3-belnr
                  and gjahr = fiscyear
                  and hkont = '0000488600'
                  and pswbt in amount.
      if sy-subrc = 0.
        move itab3-kunnr to itab4-kunnr.
        move itab3-name1 to itab4-name1.
        move itab3-vbeln to itab4-vbeln.
        move itab3-zfbdt to itab4-zfbdt.
        move itab3-augcp to itab4-augcp.
        move itab3-augbl to itab4-augbl.
        move itab3-arktx to itab4-arktx.
        move bseg-pswbt to itab4-pswbt.
        append itab4.
      endif.
    endselect.
endloop.
END-OF-SELECTION.
sort itab4 by kunnr.
loop at itab4.
    at first.
      write:/ '   customer                    ','billing doc.',
      'Billing date',' Release date','Release doc.',
     '            material                         ','G/L amount'.
    endat.
    write:/ itab4-name1.
    write at 36 itab4-vbeln.
    write at 47 itab4-zfbdt.
    write at 61 itab4-augcp.
    write at 74 itab4-augbl.
    write at 88 itab4-arktx.
    write at 127 itab4-pswbt.
endloop.
Thanks in advance!
Kindly regards,
Nico

Hello,
Thanks for your help and fast reaction, I added the 'open dataset' but probably made some minor error:
I'm getting field "result" (name of my text file) is unknown. It is neither in one of the specified tables or defined by a 'DATA' statement
Currently have following code:
Objet du programme :                                                 *
      Recherche de documents de facturation SD sur base de           *
      l' "account assignment group" de l'article                     *
      Stocker ces valeurs dans une table interne afin                *
      de retrouver les pièces comptables correspondantes.            *
      Afficher le N° du document de facturation, celui de la         *
      pièce comptable, la date de release du release document.       *
REPORT ZAT_CLRDEP01.
Tables declaration
tables : vbrp,bkpf,bseg.
Data declaration
data: begin of itab1 occurs 0,
          vbeln like vbrp-vbeln,
          arktx like vbrp-arktx,
          belnr like bkpf-belnr,
      end of itab1.
data: begin of itab2 occurs 0,
          vbeln like vbrp-vbeln,
          arktx like vbrp-arktx,
          belnr like bkpf-belnr,
      end of itab2.
data: begin of itab3 occurs 0,
          kunnr like bseg-kunnr,
          name1 like kna1-name1,
          vbeln like vbrp-vbeln,
          zfbdt like bseg-zfbdt,
          belnr like bkpf-belnr,
          augcp like bseg-augcp,
          augbl like bseg-augbl,
          arktx like vbrp-arktx,
      end of itab3.
data: begin of itab4 occurs 0,
          kunnr like bseg-kunnr,
          name1 like kna1-name1,
          vbeln like vbrp-vbeln,
          zfbdt like bseg-zfbdt,
          augcp like bseg-augcp,
          augbl like bseg-augbl,
          arktx like vbrp-arktx,
          pswbt like bseg-pswbt,
      end of itab4.
data: vbeln_tst like vbrp-vbeln.
Selections
parameters accgrp like vbrp-ktgrm default '03' obligatory.
parameters compcde like bkpf-bukrs default 'LOI' obligatory.
select-options: billdoc for vbrp-vbeln.
select-options: customer for bseg-kunnr.
select-options: fiscyear for bkpf-gjahr.
select-options: reldate for bseg-augcp.
select-options amount for bseg-pswbt.
INITIALIZATION.
fiscyear-low = sy-datum(4).
fiscyear-high = sy-datum(4).
append fiscyear.
reldate-high = sy-datum.
append reldate.
amount-low = '100'.
amount-high = '2000'.
append amount.
START-OF-SELECTION.
refresh: itab1,itab2,itab3,itab4.
clear : itab1,itab2,itab3,itab4.
clear: vbeln_tst.
select * into corresponding fields of table itab1
    from vbrp inner join bkpf
    on    vbrp~mandt = bkpf~mandt
      and vbrp~vbeln = bkpf~xblnr
    where vbrp~ktgrm = accgrp
      and bkpf~bukrs = compcde
      and bkpf~gjahr = fiscyear.
loop at itab1.
    if itab1-vbeln ne vbeln_tst.
      move itab1-belnr to itab2-belnr.
      move itab1-vbeln to itab2-vbeln.
      move itab1-arktx to itab2-arktx.
      append itab2.
    endif.
    vbeln_tst = itab1-vbeln.
endloop.
loop at itab2.
    select * from bseg
                  where bukrs = compcde
                    and belnr = itab2-belnr
                    and gjahr = fiscyear
                    and buzei = '001'
                    and augcp in reldate
                    and augbl ne ''
                    and vbeln in billdoc
                    and kunnr in customer.
      if sy-subrc = 0.
        move itab2-belnr to itab3-belnr.
        move bseg-kunnr to itab3-kunnr.
        select single name1 from kna1
                      into itab3-name1
             where kunnr = itab3-kunnr.
        move itab2-vbeln to itab3-vbeln.
        move bseg-zfbdt to itab3-zfbdt.
        move bseg-augcp to itab3-augcp.
        move bseg-augbl to itab3-augbl.
        move itab2-arktx to itab3-arktx.
        append itab3.
      endif.
    endselect.
endloop.
loop at itab3.
    select * from bseg
                where bukrs = compcde
                  and belnr = itab3-belnr
                  and gjahr = fiscyear
                  and hkont = '0000488600'
                  and pswbt in amount.
      if sy-subrc = 0.
        move itab3-kunnr to itab4-kunnr.
        move itab3-name1 to itab4-name1.
        move itab3-vbeln to itab4-vbeln.
        move itab3-zfbdt to itab4-zfbdt.
        move itab3-augcp to itab4-augcp.
        move itab3-augbl to itab4-augbl.
        move itab3-arktx to itab4-arktx.
        move bseg-pswbt to itab4-pswbt.
        append itab4.
      endif.
    endselect.
endloop.
END-OF-SELECTION.
sort itab4 by kunnr.
EXPORT OUTPUT TO FLAT TEXT FILE :                                    *
open dataset result for output in text mode.
if sy-subrc = 0.
loop at itab4.
at first.
write:/ ' customer ','billing doc.',
'Billing date',' Release date','Release doc.',
' material ','G/L amount'.
endat.
write:/ itab4-name1.
write at 36 itab4-vbeln.
write at 47 itab4-zfbdt.
write at 61 itab4-augcp.
write at 74 itab4-augbl.
write at 88 itab4-arktx.
write at 127 itab4-pswbt.
transfer itab4 to result.
endloop.
close dataset result.
endif.
Thank you!
Regards,
Nico

How do you fix error message "data rate for this file is too high for DVD. You must replace this file with one of a lower data rate".

When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.

What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

Exporting historical data to text file with MAX misses columns of data?

Similar Messages

Maybe you are looking for