Export Adaptive Filter Toolkit Algorithm To C Using LabVIEW C Code Generation Toolkit
I want to evaluate the performance of some of the standard adaptive filters & have planned to use "Adaptive Filter Toolkit" from NI. Once the desired adaptive filter is selected I want to implement the same filter algorithm in FreeScale controller.
I understand that LabVIEW C code generation toolkit exports the LabVIEW code to ANSI C code. However, I'm interested in knowing if this toolkit would be able to export Adaptive filter toolkit algorithm as well (since the underlying IP would be in the form of DLL's).
Any help on this matter would highly be appreciated !!
I want to evaluate the performance of some of the standard adaptive filters & have planned to use "Adaptive Filter Toolkit" from NI. Once the desired adaptive filter is selected I want to implement the same filter algorithm in FreeScale controller.
I understand that LabVIEW C code generation toolkit exports the LabVIEW code to ANSI C code. However, I'm interested in knowing if this toolkit would be able to export Adaptive filter toolkit algorithm as well (since the underlying IP would be in the form of DLL's).
Any help on this matter would highly be appreciated !!
Similar Messages
-
Getting trial version of adaptive filter toolkit
Hello,
I am Hisham Elgannas, PhD student at Florida institute of technology. I have Labview 2009 and first I need to upgrade it to Labview 2011. second , I need to try the adaptive filter toolkit (trial vrsion if that possible). I do research on interferomter sensors and I use the labview to acquire and digitaly process the data. I need to see how the adaptive filter and the noise cancellation toolkits work with me so that if they worked with me then I will purchase it. please tell me what should I do in order to upgrade my labview and to have trail versions of the above mentioned toolkits.
regards,
Hisham Elgannas
3215573871.Hey Hisham,
Regarding upgrading from LabVIEW 2009 to LabVIEW 2011, you will want to talk to you IT department or System Admin to see what licensing agreements your institution has. They will most likely want to get in touch with their Account Manager and see if they have a license that will work with LabVIEW 2011.
As Jeff pointed out, you can download a trial version of the toolkit from that link.
Hope it all works for what you are trying to do!
Joe S
Applications Engineer
National Instruments -
Add multiple graphs in one chart(ex.scatter chart) using labview excel report generation toolkit
How to add multiple graphs in one chart(ex.scatter chart) using labview excel report generation toolkit. Assume like my test data is like below:
X-Axis
Data1
Data2
1
1
2
13
2
3
14
3
4
15
5
5
16
3
6
7
7
The above graph generated manually in excel. I want to generate the same using excel report generation toolkit. when I use Excel Insert Graph.vi where the input data is 2D array with numeric data but here labview converts the empty cells (eg.x -axis 1,data1- is empty) as zero and while plotting i am getting zero for empty cell values.
Can anyone please help me on how to plot the graph without adding zero for empty cells?
Thanks&Regards,
Bharathi T
TE
X-Axis
Data1
Data2
1
1
2
13
2
3
14
3
4
15
5
5
16
3
6
7
7Hi Bharathi,
The Excel Insert graph function takes in only 2d arrays as inputs. Since arrays can only have numeric values, any table with a null string is read as 0. Now to get a plot like you mentioned, you could read the table and replace blank Strings as NaN. NaN values in an array when plotted do not appear in the excel sheet. For reference I have attached a sample vi to help you understand.
Regards
Vijetha Nuthakki,
Applications Engineer
NI Systems India
Attachments:
Excel_graph_multiplot.vi 21 KB -
How to Export data from a Table to Excel using PL/SQL Code
Hi,
I need to export data from a table to the excel sheet using PL/SQL script.
could you pls provide with custom codes or sample procedures.
Bobbyhttp://asktom.oracle.com/pls/ask/f?p=4950:8:7947129213057862756::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:728625409049
-
Hello,
I am a bit confused at writing the C code for the CIN. The3 code labview
gives me is:
CIN MgErr CINRun(LStrHandle var1) {
My code that I need to use needs the string input that IU had sent to the
CIN. What is the actual name of the variable that the string is passed as?
Is it LStrHandle, or var1, or the entire LStrHandle var1? Because my code
uses
messagesend(char), where char must be this variable that labview is sending.
I would apreciate any help I can get. This is the last issue I have with
my project before I can start debugging. Thanks
JMHJMH wrote:
> Hello,
>
> I am a bit confused at writing the C code for the CIN. The3 code labview
> gives me is:
> CIN MgErr CINRun(LStrHandle var1) {
>
> My code that I need to use needs the string input that IU had sent to the
> CIN. What is the actual name of the variable that the string is passed as?
> Is it LStrHandle, or var1, or the entire LStrHandle var1? Because my code
> uses
> messagesend(char), where char must be this variable that labview is sending.
> I would apreciate any help I can get. This is the last issue I have with
> my project before I can start debugging. Thanks
>
> JMH
Let's first back up and make some changes.
1) Decide how many and the types of inputs / outputs the CIN will use.
2) Create the Controls / Indicators / Constants on the Fr
ont Panel / diagram
2A) NAME ALL OF THESE ITEMS
3) Drop the CIN on the diagram start wiring the items to the CIN
[Right click on a terminal of the CIN and select 'Add Parameter' to get more
terminals]
4) Right click on the CIN and select 'Create .c file'
Now the Variables have names you can understand. IF you skip 2A then LabVIEW
will name
the variables as var1, var2, ......varN for the number of variables
(parameters) you add.
So to answer the question var1 in this case is the string coming into the CIN.
The LStrHandle is the datatype (in this case a pointer to a pointer to the
string ) of var1.
I don't want to offend you but I get the impression that you are not
comfortable
with C code and CINs. These are not for the faint of heart. I would strongly
suggest
you look for another solution to the problem before resorting to using CINs.
Of course if I have misinterpreted here you are more than welcome to send me a
lashing.
Good Luck
Kevin Kent
Attachments:
Kevin.Kent.vcf 1 KB -
Dynamically build VI using LabVIEW
I'm currently working on an application and I would like to be able to generate VI's using LabVIEW. I remember seeing something like this being used before, so I would like to know how one would go about accomplishing such a feat. The point is that I want to be able to use LabVIEW to generate LabVIEW VI's add some elements to those VI's (controls, functions, etc).
Thanks in advance,I can not comment on when, but it will become available, someday.
Vision Builder has been doing this for years.
The LV State Diagram Editor (which is wonderful by the way) can obviously edit diagrams and is apparently implemented as a VI!
THe SD Editor (which is great by the way, I love this thing, NO MORE PowerPoint to design) is an incredibly small add-on. This leads me to suspect much of this functionality (i.e. VI's to edit VI's) is already implmented in LV, we just do not have mechanisms to get at it (other than using the very restricted tools mentioned above).
I stongly agree with Wiebe in that this functionality will be rather challenging to master.
It will also be dificuly to support!
Imagine the type of code that would result. here
is one mind bogling possiblity.
Write three VI's
"A.VI" alternately calls "B" and "C".
"B.VI" Executes a "random VI" evaluates the reuslts and clones a modified version of itself as "C.VI" based its evaluation of the random code results and any prior experiments it has performed.
C.VI then duplicates the actions of B.
This could lead to a type of artificial intellegent code that is able to adapt it own algorithm.
What happens if the code after learning and growing decides it does not want to do math anymore and would rather just listen to the same albumn over and over again?
How does a support engineer address that?
The reason I present this extreme case was that this functionaly, when it comes, it will be limited at first (as we see in dynamic event registration).
I seem to remember Rolf Kalbermatter (on Info-LabVIEW) saying something like "Self modifying code is a bad idea and went out style years ago".
Just my thoughts,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
How can I capture live video and still image by a DirectX compatible USB webcam using LabView ?
Dear forum members
I'd like to design a user interface which shows a live video and capture still images for it by a DirectX compatible USB webcam using LabView or NI Vision Toolkit, how can I do this ? and If this is possible How can I reach the webcam DirectX filter properties and set them using LabView ? I would be grateful to anyone Who lead me to the correct solution.
Sincerely
Cem DEMiRKIRCem,
With our example programs you can acquire and save an image (IMAQ >> File Input and Output >> Snap and Save to File.vi) from one camera, if you double the VI's to create the image and the image task, you can easily have one program acquire and save for two cameras.
I may need more information on what you mean by calibration. Do you mean basic camera setup? That can be done in Measurement and Automation Explorer by setting up the options within the IMAQ settings for each camera. Or do you mean more complex calibration for special types of images? The more description of what you mean, the better I will be able to help you get it done. You mentioned zoom and motion parameters, what kind of motion? Our vision drivers only control triggering the camera to acquire, then analyzing, processing and displaying the resulting image.
If you have more details on exactly what you want to do, that would be great. Let me know if you have more questions, thanks!
-Allison S.
Applications Engineering
-Allison S.
Calibration Services
Product Support Engineer -
How to filter by manager's name using selection screen
Hi all,
I am trying to modify the report to filter data from the report based on the manger name given in selection screen. As the manger's name was given in selection screen.. records have to come only of the employee how were working under that entered manager name.
I am unable to follow this code to modify.. where to add select criteria to filter... please make modify to my code..
I am pasting my code here, Can any one kindly help for this scenario.
TABLES: PA0001, "HR Master Record: Infotype 0001 (Org. Assignment),
PA0002,
P0000,
PA9001,
PA0007,
HRP1001, "Infotype 1001 DB Table
PA0034. "HR Master Record: Infotype 0034 (Corporate Function)
*Internal table for holding output data
DATA: IT_PA0002 LIKE PA0002 OCCURS 100 WITH HEADER LINE,
IT_PA9001 LIKE PA9001 OCCURS 100 WITH HEADER LINE,
IT_PA0007 LIKE PA0007 OCCURS 100 WITH HEADER LINE,
IT_PA0034 LIKE PA0034 OCCURS 100 WITH HEADER LINE.
DATA: IT_RET LIKE BAPIRET2,
IT_ACT LIKE BAPI_SWHACTOR OCCURS 0,
IT_STR LIKE BAPI_STRUC OCCURS 0,
IT_ORG LIKE BAPI_OBJEC OCCURS 0,
IT_POS LIKE BAPI_OBJEC OCCURS 0,
IT_SUP LIKE BAPI_OBJEC OCCURS 0,
IT_FCAT LIKE BAPI_HRAQFIELDDESCRIPTION OCCURS 0,
IT_FDAT LIKE BAPI_HRFIELDDATA OCCURS 0,
IT_ORGS TYPE STANDARD TABLE OF BAPI_OBJEC WITH HEADER LINE,
IT_POSS TYPE STANDARD TABLE OF BAPI_OBJEC WITH HEADER LINE,
IT_SUPR TYPE STANDARD TABLE OF BAPI_OBJEC WITH HEADER LINE,
V_DATE TYPE SY-DATUM,
IT_T500P LIKE T500P OCCURS 0 WITH HEADER LINE,
IT_TT500P LIKE T500P OCCURS 0 WITH HEADER LINE,
IT_T001P LIKE T001P OCCURS 0 WITH HEADER LINE .
DATA: IT_PA0001 LIKE PA0001 OCCURS 100 WITH HEADER LINE,
P_ENDDA LIKE sy-datum.
DATA: Begin of I_HRE,
pernr like pa0001-pernr, "Emp Number
nachn like pa0002-nachn, "Last Name
vorna like pa0002-vorna, "First Name
plans like BAPI_OBJEC-LONG_TEXT, "Position
div_text like pa9001-div_text,
kztim like ZKZTIM_VAUES-name,
stext like T591S-STEXT, "Corporate function text
werks like BAPI_OBJEC-LONG_TEXT,
btrtl like pa0001-btrtl,
orgeh like BAPI_OBJEC-LONG_TEXT,
kostl like pa0001-kostl,
mstbr like pa0001-mstbr, "Supervisor
End of I_HRE.
DATA: I_HR like I_HRE occurs 100 with header line.
DATA: V_PLANS LIKE PA0001-PLANS,
V_EMP LIKE PA0001-PERNR,
V_KOSTL LIKE PA0001-KOSTL,
V_SUPER LIKE BAPI_OBJEC-LONG_TEXT,
V_EMP_POS LIKE BAPI_OBJEC-LONG_TEXT,
V_SUPER_POS LIKE BAPI_OBJEC-LONG_TEXT,
V_HEADER TYPE N VALUE 1,
V_COUNTER TYPE N VALUE 1,
EMP_INDICATOR TYPE N,
V_ORGEH LIKE BAPI_OBJEC-LONG_TEXT,
V_WERKS LIKE BAPI_OBJEC-LONG_TEXT,
V_KZTIM LIKE ZKZTIM_VAUES-NAME,
V_STEXT LIKE T591S-STEXT.
DATA: v_file TYPE string, "Detail Filename
v_filerecord(1000),
f_filerecord(1000),
drive(3),
mstbr like pa0001-mstbr, "Supervisor
count type n value 0.
SELECTION-SCREEN BEGIN OF BLOCK SELECTION WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_PERNR FOR P0000-PERNR,
S_WERKS FOR PA0001-WERKS,
S_BTRTL FOR PA0001-BTRTL,
S_PERSG FOR PA0001-PERSG,
S_ORGEH FOR PA0001-ORGEH,
S_DIV FOR PA9001-DIV_CODE,
S_KZTIM FOR PA0007-KZTIM,
S_sname for pa0001-sname, " this is to enter name
" as manager name
S_FUNKT FOR PA0034-FUNKT.
SELECTION-SCREEN END OF BLOCK SELECTION.
SELECTION-SCREEN BEGIN OF BLOCK SELECTION1 WITH FRAME TITLE TEXT-002.
PARAMETERS: P_BEGDA LIKE SY-DATUM DEFAULT sy-datum.
* P_ENDDA LIKE SY-DATUM DEFAULT '99991231'.
SELECTION-SCREEN END OF BLOCK SELECTION1.
START-OF-SELECTION.
if P_BEGDA is initial.
p_begda = sy-datum.
endif.
if P_ENDDA is initial.
p_endda = sy-datum.
endif.
if S_PERSG is initial.
* S_PERSG-SIGN = 'I'.
* S_PERSG-OPTION = 'EQ'.
* S_PERSG-LOW = '1'.
* APPEND S_PERSG.
* S_PERSG-SIGN = 'I'.
* S_PERSG-OPTION = 'EQ'.
* S_PERSG-LOW = '6'.
* APPEND S_PERSG.
S_PERSG-SIGN = 'I'.
S_PERSG-OPTION = 'NE'.
S_PERSG-LOW = '5'.
APPEND S_PERSG.
endif.
SELECT * FROM PA0001 into IT_PA0001
WHERE PERNR IN S_PERNR
AND WERKS IN S_WERKS
AND BTRTL IN S_BTRTL
AND PERSG IN S_PERSG
AND ORGEH IN S_ORGEH
AND BEGDA LE P_BEGDA
AND ENDDA GE P_ENDDA.
APPEND IT_PA0001.
ENDSELECT.
IF not S_DIV[] is initial.
SELECT * FROM PA9001 into IT_PA9001
WHERE DIV_CODE IN S_DIV.
APPEND IT_PA9001.
ENDSELECT.
ENDIF.
IF not S_KZTIM[] is initial.
SELECT * FROM PA0007 into IT_PA0007
WHERE KZTIM IN S_KZTIM.
APPEND IT_PA0007.
ENDSELECT.
ENDIF.
IF not S_FUNKT[] is initial.
SELECT * FROM PA0034 into IT_PA0034
WHERE FUNKT IN S_FUNKT.
APPEND IT_PA0034.
ENDSELECT.
ENDIF.
SORT IT_PA0001 by SNAME.
LOOP AT IT_PA0001.
IF not S_DIV[] is initial.
READ TABLE IT_PA9001 with key pernr = IT_PA0001-PERNR.
IF sy-subrc ne 0.
continue.
ENDIF.
ENDIF.
IF not S_KZTIM[] is initial.
READ TABLE IT_PA0007 with key pernr = IT_PA0001-PERNR.
IF sy-subrc ne 0.
continue.
ENDIF.
ENDIF.
IF not S_FUNKT[] is initial.
READ TABLE IT_PA0034 with key pernr = IT_PA0001-PERNR.
IF sy-subrc ne 0.
continue.
ENDIF.
ENDIF.
V_COUNTER = 1.
V_EMP = IT_PA0001-PERNR.
V_KOSTL = IT_PA0001-KOSTL.
* WRITE: (10) V_EMP, (20) PA0002-NACHN, (20) PA0002-VORNA.
WRITE: / SY-VLINE. " Left border
WHILE V_EMP NE ''.
PERFORM GET_SUPER CHANGING V_EMP V_SUPER
V_EMP_POS.
if v_emp ne ''.
select single * into it_pa0002 from pa0002
where pernr = v_emp
and begda LE p_begda
and endda GE p_endda.
IF V_HEADER = 1.
PERFORM HEADING.
V_HEADER = 0.
ENDIF.
WRITE: (10) V_EMP, (17) IT_PA0002-NACHN
,(17) IT_PA0002-VORNA, (40) V_EMP_POS.
move v_emp to i_hr-pernr.
move IT_PA0002-NACHN to i_hr-nachn.
move IT_PA0002-VORNA to i_hr-vorna.
move V_EMP_POS to i_hr-plans.
EMP_INDICATOR = V_COUNTER.
IF V_COUNTER = 1.
select single * into it_pa9001 from pa9001
where pernr = v_emp
and begda LE p_begda
and endda GE p_endda.
select single * into it_pa0007 from pa0007
where pernr = v_emp
and begda LE p_begda
and endda GE p_endda.
PERFORM GET_KZTIM_TEXT CHANGING it_pa0007-kztim V_KZTIM.
select single * into it_pa0034 from pa0034
where pernr = v_emp
and begda LE p_begda
and endda GE p_endda.
PERFORM GET_FUNKT_TEXT CHANGING it_pa0034-funkt v_stext.
write: (8) IT_PA9001-DIV_CODE, (17) V_KZTIM,
(25) V_STEXT.
move IT_PA9001-DIV_CODE to i_hr-div_text.
move v_KZTIM to i_hr-kztim.
ENDIF.
IF V_COUNTER = 0.
WRITE: (1) '|'.
ENDIF.
IF V_COUNTER = 1.
PERFORM GET_NAMES.
WRITE: (20) V_WERKS, (5) IT_PA0001-BTRTL
,(20) V_ORGEH,(11) V_KOSTL, (3) '|'.
V_COUNTER = 0.
move V_WERKS to i_hr-werks.
move IT_PA0001-BTRTL to i_hr-btrtl.
move V_ORGEH to i_hr-orgeh.
move V_KOSTL to i_hr-kostl.
ENDIF.
clear it_pa0002.
refresh it_pa0002.
endif.
V_EMP = V_SUPER.
move V_SUPER to i_hr-mstbr.
if EMP_INDICATOR EQ 1.
append i_hr.
endif.
clear i_hr.
ENDWHILE.
NEW-LINE.
CLEAR : V_KZTIM, it_pa9001, it_PA0007.
ENDLOOP.
* Check if its a background Job
IF SY-BATCH NE SPACE.
perform write_file. "Output File
ENDIF.
ULINE.
*& Form GET_SUPER
* This subroutine takes the position number and get the position
* number that it reports to and then who is holding that position and
* then the name of the person who is holding that position in order to
* provide the supervisors name for the person in that position.
* --> p1 text
* <-- p2 text
FORM GET_SUPER CHANGING EMP_SUB EMP_SUPER
EMP_SUB_POS .
DATA: v_reporto like hrp1001-varyf value space,
v_holder like hrp1001-varyf value space,
v_filled like hrp1001-varyf value space,
v_otype like hrp1001-otype value space,
v_objid like hrp1001-objid value space.
CLEAR: v_reporto, v_holder, v_filled, v_otype, v_objid,
EMP_SUB_POS.
Select single plans
into v_plans
from pa0001
where pernr = emp_sub
and begda LE p_begda
and endda GE p_endda.
CALL FUNCTION 'BAPI_ORGUNITEXT_DATA_GET'
EXPORTING
PLVAR = '01'
OTYPE = 'S'
OBJID = v_PLANS
KEYDATE = SY-DATUM
SCENARIO = ' '
* EVALPATH = 0
EVALDEPTH = 0
IMPORTING
RETURN = IT_RET
TABLES
* ACTORTAB = IT_ACT
* STRUCTURALDATA = IT_STR
OBJECTSDATA = IT_SUP
* FIELDCATALOGUE = IT_FCAT
* FIELDDATA = IT_FDAT
IF SY-SUBRC EQ 0.
READ TABLE IT_SUP INTO IT_SUPR
WITH KEY PLAN_VERS = '01'
OBJECTTYPE = 'S'
OBJECT_ID = v_PLANS.
IF SY-SUBRC EQ 0.
MOVE IT_SUPR-LONG_TEXT TO EMP_SUB_POS.
ENDIF.
ENDIF.
Select Single varyf
into v_reporto
from hrp1001
where otype = 'S'
and objid = v_plans
and rsign = 'A'
and relat = '002'
and begda LE p_begda
and endda GE p_endda.
if sy-subrc = 0.
move v_reporto+0(1) to v_otype.
move v_reporto+2(8) to v_objid.
Select single varyf
into v_holder
from hrp1001
where otype = v_otype
and objid = v_objid
and rsign = 'A'
and relat = '008'
and begda LE p_begda
and endda GE p_endda.
if sy-subrc = 0.
move v_holder+0(1) to v_otype.
move v_holder+2(8) to v_objid.
EMP_SUPER = v_objid.
IF EMP_SUB = EMP_SUPER.
EMP_SUPER = ''.
ENDIF.
* Select single varyf
* into v_filled
* from hrp1001
* where otype = v_otype
* and objid = v_objid
* and rsign = 'A'
* and relat = '209'.
* if sy-subrc = 0.
* CLEAR: IT_RET, IT_ACT, IT_STR, IT_FCAT, IT_FDAT,
* IT_SUP, IT_SUPR.
* REFRESH: IT_POSS.
* move v_filled+0(2) to v_otype.
* move v_filled+2(8) to v_objid.
* CALL FUNCTION 'BAPI_ORGUNITEXT_DATA_GET'
* EXPORTING
* PLVAR = '01'
* OTYPE = v_otype
* OBJID = v_objid
* KEYDATE = V_DATE
* SCENARIO = ' '
** EVALPATH = 0
* EVALDEPTH = 0
* IMPORTING
* RETURN = IT_RET
* TABLES
** ACTORTAB = IT_ACT
** STRUCTURALDATA = IT_STR
* OBJECTSDATA = IT_SUP
** FIELDCATALOGUE = IT_FCAT
** FIELDDATA = IT_FDAT
* IF SY-SUBRC EQ 0.
* READ TABLE IT_SUP INTO IT_SUPR
* WITH KEY PLAN_VERS = '01'
* OBJECTTYPE = v_otype
* OBJECT_ID = v_objid.
* IF SY-SUBRC EQ 0.
* MOVE IT_SUPR-LONG_TEXT TO EMP_SUPER.
* ENDIF.
* ENDIF.
* endif.
endif.
endif.
if sy-subrc <> 0.
EMP_SUPER = ''.
endif.
ENDFORM. " GET_SUPER
*& Form HEADING
* text
* --> p1 text
* <-- p2 text
FORM HEADING .
FORMAT INTENSIFIED OFF. " Remove any INTENSIFIED
FORMAT COLOR COL_HEADING INTENSIFIED." Title color
WRITE: (10) 'Employee', (17) 'Last Name'
,(17) 'First Name', (40) 'Position'
,(8) 'Division', (17) 'Management Type'
,(25) 'Corporate Function'
,(20) 'Personnel Area', (5) 'PSA'
,(20) 'Org. Unit',(11) 'Cost Center',(3) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
,(10) 'Supervisor', (17) 'Last Name'
,(17) 'First Name', (40) 'Position', (1) '|'
ULINE . " Line below titles
NEW-LINE.
WRITE: / SY-VLINE. " Left border
FORMAT COLOR OFF.
ENDFORM. " HEADING
*& Form GET_NAMES
* text
* --> p1 text
* <-- p2 text
FORM GET_NAMES .
CLEAR: IT_RET, IT_ACT, IT_STR, IT_ORG, IT_POS, IT_FCAT, IT_FDAT,
IT_ORGS, IT_POSS, V_ORGEH, V_WERKS.
REFRESH: IT_ORGS, IT_POSS.
MOVE SY-DATUM TO V_DATE.
CALL FUNCTION 'BAPI_ORGUNITEXT_DATA_GET'
EXPORTING
PLVAR = '01'
OTYPE = 'O '
OBJID = IT_PA0001-ORGEH
KEYDATE = V_DATE
SCENARIO = ' '
* SCENARIO = 'MDT1'
* EVALPATH = '0 '
EVALDEPTH = 0
IMPORTING
RETURN = IT_RET
TABLES
* ACTORTAB = IT_ACT
* STRUCTURALDATA = IT_STR
OBJECTSDATA = IT_ORG
* FIELDCATALOGUE = IT_FCAT
* FIELDDATA = IT_FDAT
IF SY-SUBRC EQ 0.
READ TABLE IT_ORG INTO IT_ORGS
WITH KEY PLAN_VERS = '01'
OBJECTTYPE = 'O '
OBJECT_ID = IT_PA0001-ORGEH.
IF SY-SUBRC EQ 0.
MOVE IT_ORGS-LONG_TEXT TO V_ORGEH.
ENDIF.
ENDIF.
CALL FUNCTION 'HR_TMW_READ_T500P'
EXPORTING
PERSA = IT_PA0001-WERKS
IMPORTING
W500P = IT_T500P
EXCEPTIONS
NO_ENTRY_FOUND = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC EQ 0.
MOVE IT_T500P-NAME1 TO V_WERKS.
CLEAR: IT_T500P.
REFRESH: IT_T500P.
ENDIF.
* CALL FUNCTION 'HR_TMW_READ_T001P'
* EXPORTING
* PERSA = PA0001-WERKS
* BTRTL = PA0001-BTRTL
* IMPORTING
* W001P = IT_T001P
* EXCEPTIONS
* NO_ENTRY_FOUND = 1
* OTHERS = 2.
* IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
* IF SY-SUBRC EQ 0.
* MOVE IT_T001P-BTEXT TO IT_HRR05-BTRTL.
* ENDIF.
ENDFORM. " GET_NAMES
*& Form GET_KZTIM_TEXT
* text
* <--P_V_EMP text
* <--P_V_KZTIM text
FORM GET_KZTIM_TEXT CHANGING P_KZTIM_ID
P_KZTIM.
select single NAME into P_KZTIM from ZKZTIM_VAUES
where TYPE eq P_KZTIM_ID.
ENDFORM. " GET_KZTIM_TEXT
*& Form GET_FUNKT_TEXT
* text
* <--P_V_EMP text
* <--P_V_KZTIM text
FORM GET_FUNKT_TEXT CHANGING P_FUNKT_ID
P_STEXT.
select single STEXT into P_STEXT from T591S
where SPRSL eq 'EN' and
INFTY eq '0034' and
SUBTY eq P_FUNKT_ID.
ENDFORM. " GET_KZTIM_TEXT
*& Form write_file
* text
* --> p1 text
* <-- p2 text
FORM write_file .
* Checking the System ID
if sy-sysid = 'RD1'.
drive = 'D:\'.
else.
drive = 'M:\'.
endif.
* concatenate drive sy-sysid
* '\Output\Reports\HR\HR_Public\Emp_Hierarchy'
* sy-datum
* '.xls' into v_file.
concatenate drive sy-sysid
'\Output\Reports\HR\HR_Public\Emp_Hierarchy.xls'
into v_file.
OPEN DATASET v_file FOR OUTPUT in text mode encoding default.
concatenate 'Employee'
'Last Name'
'First Name'
'Position'
'Division'
'Management Type'
'Corporate Function'
'Personnel Area '
'PSA'
'Org. Unit'
'Cost Center'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
'Supervisor'
'Last Name'
'First Name'
'Position'
into v_filerecord
separated by CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
transfer v_filerecord to v_file. "Writing to file
clear v_filerecord.
loop at IT_PA0001.
do.
if count eq 0.
read table i_hr with key pernr = IT_PA0001-pernr.
concatenate i_hr-pernr
i_hr-nachn
i_hr-vorna
i_hr-plans
i_hr-div_text
i_hr-kztim
i_hr-stext
i_hr-werks
i_hr-btrtl
i_hr-orgeh
i_hr-kostl
into v_filerecord
separated by CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
mstbr = i_hr-mstbr.
count = count + 1.
else.
read table i_hr with key pernr = mstbr.
concatenate v_filerecord
i_hr-pernr
i_hr-nachn
i_hr-vorna
i_hr-plans
into f_filerecord
separated by CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
v_filerecord = f_filerecord.
mstbr = i_hr-mstbr.
clear i_hr.
endif.
if mstbr eq space.
exit.
endif.
enddo.
transfer v_filerecord to v_file. "Writing to file
clear: v_filerecord, f_filerecord, count.
endloop.
CLOSE DATASET v_file.
ENDFORM. " write_file
Edited by: Surender Batlanki on Feb 20, 2008 7:50 AM
Edited by: Surender Batlanki on Feb 20, 2008 7:59 AM
Edited by: Surender Batlanki on Feb 20, 2008 8:12 AM
Edited by: Surender Batlanki on Feb 20, 2008 3:16 PM
Edited by: Alvaro Tejada Galindo on Feb 20, 2008 9:26 AMHi Surender,
In the Perform GET_SUPER, you are getting manager's OBJID. Use this OBJID and from PA0001 get Manger's name.
While passing data to output table, filter that table by Manager's name and then pass output table for display.
Hope this helps u.
<REMOVED BY MODERATOR>
Regards,
Preeti
Edited by: Alvaro Tejada Galindo on Feb 20, 2008 9:26 AM -
What are the fft based algorithms DIAdem is using?
Greetings! I am relatively new to DIAdem and am trying to find some basic information about how DIAdem is performing some calculations, specifically the FFT based functions. The DIAdem help does not cover in depth what I would like to know and I cannot find anything on NI's website or these boards (yet) that does. I did find one post that discussed the algorithms used in DIAdem Crash Analysis (originating from the NHTSA?) that gave a very good discussion, but this is specific to Crash. Is there a similar paper for the algorithms within DIAdem? Yes, I have run the same data through both DIAdem and an app we currently use and the results are very close, but this anecdotal evidence is not enough to satisfy the folks I work for. Can someone point me in the correct direction? Thanks!
Hi,
DIAdem is using several different FFT algorithms, depending on the version of DIAdem and the mathematical function. The basic FFT, witch is calculating the real/imaginary part out of the time signal, is well defined. Each algorithm gives almost the same result. There are only very small differences on the last bits of the float values. The basic FFT algorithm is usually not very large. It is easy to use different functions or libraries depending on the needs. The results have to be the same in all cases.
DIAdem 10.2 is using a new algorithm which is able to do FFT calculations with any number of values, not just the power of two. This algorithm is also used in other NI-products like LabVIEW. A large afford is going into the quality and speed of this algorithm because not only the simple FFT but also a number of additional functions like the sound and vibration toolkit for LabVIEW is depending on this.
The difficult part, when it comes to comparison between DIAdem and other FFT calculations, is always the large number of options. You need to know the number of values, sampling frequency, window function, window correction and the averaging. You can calculate peak, rms or power spectrum and so on. Depending on the options, you can get very different but still correct results.
Crash is much more a question of standards. Starting with sampling frequencies and ending with precise defined algorithms to get a result like the HIC-value witch has to be reproducible and comparable between cars from different vendors all over the world.
As soon as you start to do real world FFT calculations there are so many options and possible ways do get the results you need, that it is impossible to discuss all of them in a documentation of a Software like DIAdem. You could write a series of books about this.
If you have specific questions about the FFT results, you can give it a try and ask on this forum.
Ulrich Bierwisch -
ES11X-G4-H essbase export adapter issue
Hello,
i have this problem with essbase export adapter for FDM:
When i perform export step everything seems to be fine but /APPS/myFdmApp/myFile.dat doesn't contain records that i can find with both on web interface and with a query on oracle fdm's system views "VDATAFACT" or "VDATA" (on repository database).
No errors or reject records infos are shown nor in fdm neither in essbase (system and app) log.
This happens with very large input file (300mb). Anyone has some ideas on what's happening?
Thank you in advance,
Daniele
FDM: v11.1.2.1
EsbAdapter: ES11X-G4-H
S.O.: Win2008 SE R2 (x64)
RDBMS: Oracle 11.2.0.1.0 (on linux)I've opened a service request. Here it is the last message i got from them. Please note that this SR had lasted over 2 month.
What they say basically is: it doesen't work but FDM is not designed for big amount of data, so we are not going to fix it.
Which is the max filesize handled by FDM is unknown....
Daniele
Hi Daniele,
Good Morning!
I tried to Reach you on the Number Mentioned in the SR.We Discussed This Issue With the Product Specialist and They have Suggested Not to Use 200Mb File, because it is too Big for FDM to Handle it, Please Try to Split the File and Load it, FDM is not a ETL tool to Handle Such big File.Please let me know if you want anything Else on This.
With Regards,
xxxxx.
Hello xxxxx,
could you please provide me the max file size handled by fdm? I'd like to have some docs on that also.
regards,
Daniele
Hi Daniele,
There is No Limitation as such FDM is not designed to load Millions of records. It's a End user fiinancial tool, not designed to be used as an ETL tool, so there is not a restriction per say, but it's not designed to be used in that manner.
With Regards,
xxxxx -
Building of a Robust Spline Profile Filter using Labview
Hi Thank you to anyone that followed me here from my previous post.
I am looking for some help with the building and implementation of the above mentioned filter. I have the mathematics attached. I will have access to Labviews Digital Filter Toolkit in a couple of days.
The purpose of this filter is to create a mean line through the peaks and vallys of a surface profile.
Attachments:
Spline Filter.docx 431 KBHey Simone,
I have used some basic labview code to generate a couple of matrices and I've done some basic calculations, I was hoping to show you how to implement them. As for the spline filter there is on in the DFT, if you press CTRL+Space bar it will bring up LabVIEW search (this takes some time to load) the type spline and you should find it.
Regards
Andrew George @ NI UK
Attachments:
matrix.vi 12 KB -
Help needed while exporting crystal reports to HTML file format using java
Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanksthe ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM -
How do I set the thumbnail image of my videos that export to my computer? I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.
Or how does Premiere 11 determine where to set the image for the video it is exporting?
I already know how to use Freeze frame and save the image to my computer by Publish+Share/Computer/ Immage.
Thanks,
MikeMike
This is not Adobe. Rather user to user. We are all visitors here.
Just a bit of history....back in the days of Premiere Elements 4, you could set a "poster frame" in what was called the Project area. You did this by right clicking a blank area there and, from the drop down menu that appeared, selecting View/Preview Area, and using the poster frame feature there.
As I said, when a video imports into Premiere Elements, the thumbnail of the import has been presenting as the first frame of the video. With this Preview area "poster frame" option, you could set the video's thumbnail in the Project area so that the first frame was another frame in the video. But, this "perk" was restricted to thumbnails of the video in Project area.
If you exported to file with the first frame modified video, the export's thumbnail in Windows Explorer would present with other than the real first frame or the poster frame as the first frame.
Also, in more recent versions, I have observed that the export to file does not display the real first frame of the video in Windows Explorer. Seems random, but I have not kept track.
And, remember, at the onset I wrote
As far as I have ever seen, Premiere Elements Windows uses the first frame of the video for its thumbnail in the program.
I know of no way within Premiere Elements to control what the program opts to do in this matter. In some compatibility
issues, it opts to give no image but a generic one.
I did not say that you can expect to have the Premiere Elements' export file's thumbnail in Windows displaying with its real first frame. And, the more you get into this, depending on the versions, more details need to be added to my comment about "...first frame of video for its thumbnail in the program..."
I would have to look into all this further to get perspective on the contributing factors.
ATR
Add On...The Poster Frame feature appeared in versions 4, 7, 8, and 9 by my count. -
Exporting the Browse Sequence XML file for Use in Another Project
When I generate a browse sequence based on the TOC using zero for the book level, instead of getting A, A1, A2, B, B1, B2, I get A, B, A1, A2, B1, B2. The TOC runs through all 1st level items first, cycles back through all 2nd level item, then 3rd level, etc.
My workaround was to auto-create the browse sequence at a 0 level and then manually manipulate it to output according to how my readers would actually read my online book (ie A Aa A1 A1a A1b A2 A2a A2b B B1 etc etc).
Now that I have my browse sequence in the correct order for this project, I do not want to repeat these steps every time I create a new version of my OLH for the same guide after some minor updates have been made to the FM source.
There is a file named whbrs.xml inside the output folder and it contains the browse sequence order I specified during my workaround steps.
Is it possible to export this file to another location for use in another project referencing the same guide?
This methodology is much preferred as I am working at an enterprise level with multiple documents (some numbering in the hundreds of pages) and do not want to have to manually use my workaround for each project I update over the next few years.Hi Kristopher
You probably wouldn't want to use that particular file as it's an output file. You would likely have better luck using the ProjectName.BRS file as that one should be a source file.
However, keep in mind that whether (or how well) this will work will entirely depend on having the recipient project using the same identical structure and identical file names.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
How can I export an .PLT file from Illustrator without using any other software but Illustrator
I'm in the URGENT need of exporting a file to .PLT and no using any other software like the producer's software.
You can't. AI doesn't produce .PLT files.
Maybe you are looking for
-
I would like to update Garageband to the newest version for my macbook pro (OS X 10.6.8)
I currently have Garageband V3.0.5 and I would like to update but when I try to get V4 or higher I get an error. Is this as high as I can go with my operating system?
-
Inbound IDoc w/message ORDERS - issues with error processing
We are using inbound IDoc ORDERS05 with message type ORDERS to create the sales orders in SAP. In WE20 we have the following settings: - partner type LS (= Sales Org VKORG) - process code ORDE - trigger by background program - post-processing agent o
-
I can't download anything When I want to download a app it says after entering apple password it says connection manager invoke retry or cancel
-
Variable Screen for 3.5 BEx Queries In EP 6.0 Iviews
Friends, Does anyone know how to force the variable screen in an EP 6.0 Iview based on a 3.x BW. I have a query written in Web BEx with several optional variables. When I launch this from Web BEx it stops at the variable screen. The problem is that
-
Good afternoon. After spending an hour searching the internet for information about this topic on the internet, I was directed here. I am shooting large numbers of pictures in NEF, and I want to make edits to them in ACR in a batch, as one can with A