Export ipa file for an iPhone application

i did an application in flash cs5. i attached p12 certificate and provisining profile file. But when i choose "publish" for creating an ipa file, it is running. at the end, there is nothing. i look in folder. i see two files, one of them an tmp file, the other a folder "AOT.....". it doesn't creat an ipa file. why ? what can i do ?
please help me...

one of two things...
1. The publishing is still in progress. those files/folders are temp while the publishing is in progress and is usually cleaned up once it's done and the ipa is created.
2. if the packaging fails or stops abnormally, then the temp files/folders don't get cleaned up and the ipa is not created.
Possible reasons (all of which I have had happen to me from time to time):
1. I was having problems with publishing when spybot 2.0 beta was installed, it was Hooking java and causing it to crash. (system your systems application event log for possible java errors) (Flash uses a java compiler)
2. You do not have enough memory... increase the size of the heap in your jvm.ini (just google it, there are tons of reference material on flash memory management)
3. There is some code someplace in your project which is causing the compiler to crap out
If you can't figure it out, try doing a command line ADT build to see if it gives any additional errors that may be surpressed by flash (I've had that happen too)
Good luck.

Similar Messages

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

Problems installing Xcode for building iPhone applications

Just got a mac mini today for building iphone applications. I'm new to macs.
Downloaded the iPhone SDK. Installed it. But I saw there are a lot of
packages. Do I need to install them all? I've installed the iPhone ones.
When I launch Xcode I get the 'Welcome to Xcode 3.1', which just looks like
a lot of tutorials. How do I run the Xcode application to build iPhone apps?
Cheers,
John.

you just install XCode and it will install ALL packages, the packages that you see are to be installed one by one for expert users or users that want to have a the newest packages.
Remember: Install the iPhone SDK 2.2
you just go to menu and click File > New Project > iPhone and choose the type of project for the iPhone that you want to use, WebApp, UIApp, etc ...
because you are new to the MAC world and probably never used Objective-C in your live, it is good to start somewhere first, buy a good book of the subject, start with the language (Objective-C) them learn about the framework (Cocoa Touch) and then read all about XCode.
In the meanwhile you can check several websites to start knowing what you going to be able to do one day, here are some examples:
- Writing your first iPhone application (payed movies, first for free)
- iPhone Developer Central
- Apps Amuck
- iPhone SDK Articles
remember that you will need to apply to the iPhone Developer Program in order to submit your SDK Apps to the Apple AppStore.
Updated: You can find several movies on YouTube on how to start building apps to the iPhone, but the most seams to do a bad job cause they are screen casting the entire desktop rather the area that we need, so text will be unreadable on such dimensions.

My desktop files and folders no longer appear on the screen. I think this is a result of an iPhoto updating. It appears (from getting info) that now Desktop is being treated like a normal file for which an application to open it must be supplied. Help?

My desktop files and folders no longer appear on the screen. I think this is a result of an iPhoto updating. It appears (from getting info) that now Desktop is being treated like a normal file for which an application to open it must be supplied. Can anything be done? Incila

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

How to create a .exe file for a java application

Hi, I want to create a .exe file for a java application I am developing so that I can schedule it to run at a particular time using Windows Scheduler on WinNT. Is there any way to accomplish this? Or is there any other way in which a Java application can be scheduled to run at a particular time on Windows everyday?

Create a .bat file and run that. Just have, in the .bat file:
java YourClassName Alternatively, you can use javaw YourClassName (without *.bat, just put it into Windows Scheduler like suggested above).
using javaw won't pop up any window...

Can we make jar file for simple j2se application

Hi..Can we make a jar file for simple j2se application so that it can be executed on any system like .exe file...

Read the JAR files section in Sun's Java tutorial.

Exporting MPEG2 files for Blu-ray from 720p60

I am exporting MPEG2 files for Blu-ray from 720p60 using compressor 3.05. I export straight from Final Cut 6 to compressor. It all looks great except I end up with some frames in the video that pixelate. It is just one frame, and the average viewer may not see it, but if you go frame by frame you see it. I thought it was just a bad export, but I exported the file again and the same thing happens again on the exact same frame. The fact that it happened again on the exact same frame was very odd to me. It is this way on five different video files. It's certainly not like that in the original on my timeline, so I don't know why it is doing that.
I guess I will try exporting a quicktime file first and then putting that file through compressor to see if that makes a difference. Any ideas from anybody?

Exporting a quicktime file first still produced the pixelated frame. I'm not sure what else to try.

Is it possible to check the previous backups on a certain backup file for the iPhone.

Is it possible to check the previous backups on a certain backup file for the iPhone. I need to backup and restore the files which were used in the second week of January, but now I am only able to see the latest iteration of the backup. I am assuming that the iPhone backup rewrites on the same set of files. I may be mistaken. Is there any work around to see the old backups? Any kind of help would be seriously appreciated.

You can use zoom: Settings>General>Accessibility.
" A simple double-tap with three fingers instantly zooms in 200 percent, and you can adjust the magnification between 100 and 500 percent."

New issue , when importing new paid app spreadsheet into Configurator iTunes attempts to download an ipa file for each redeem code . If you have 100 codes 100 downloads will start. Call enterprise support if you are seeing this issue.

New issue , when importing new paid app spreadsheet into Configurator iTunes attempts to download an ipa file for each redeem code . If you have 100 codes 100 downloads will start. Call enterprise support if you are seeing this issue.

New issue , when importing new paid app spreadsheet into Configurator iTunes attempts to download an ipa file for each redeem code . If you have 100 codes 100 downloads will start. Call enterprise support if you are seeing this issue.

Download IPA files for applications

We are using MDM software to manage IOS device in organisations. For distributing apps we need .ipa files, Provisioning Profiles and Code signing certificates. Please suggest how can we obtain these for different apps like Lookout, AngryBirds etc.

If you mean you don't want to distribute your app via iTunes then you need a DPS Enterprise account and an iTunes Enterprise developer account to do private distribution.
Neil

Using a local XML file for parsing - iPhone

Good afternoon everyone. I am trying to create an application for the iPhone that will use an XML file for it's data source. I have been attempting to convert the SeismicXML application from the dev center to use a locally stored file, but to no avail. I have it building and running fine, but no data is appearing. Is there anyone that can give me an example of parsing with a locally stored file? Thanks!

NSString *filePath = [[NSBundle mainBundle] pathForResource:@"myFile" ofType:@"xml"];
NSData *myData = [NSData dataWithContentsOfFile:filePath];
if ( myData ) {
NSXMLParser *parser = [[NSXMLParser alloc] initWithData:myData];
[parser setDelegate:myObject];
[parser setShouldProcessNamespaces:NO];
[parser setShouldReportNamespacePrefixes:NO];
[parser setShouldResolveExternalEntities:NO];
[parser parse];
NSError *parseError = [parser parserError];
if ( parseError && error) {
*error = parseError;
// Do post load activity

Problem exporting FXG file for use in Flash

I have a simple rectangle with a 3D-bevel effect built in Illustrator that I need to export as an FXG file for use in Flash.
When I export from Illustrator to an FXG format, it creates bitmaps and embeds those in the FXG file.
if i import directly into Flash CS5 there are transparent gaps (and the symbols created are very complex), and it warns me that the objects aren't compatible with flash and they should be converted to bitmaps first.
Is there a way to export the object to an FXG file and keep it in a vector format?
if not, and this may be an Illustrator question, is there a way to create the same kind of effect so that I can get an end FXG object that will work in Flash?
An example of what I am seeing is posted here: http://idg-partners.com/flash_issue.html
Thanks in advance.

Is there a way to export the object to an FXG file and keep it in a vector format?
Create the bevel edges as separate objects with gradient fills. not sure why you need AI, though. You can do that jsut the same directly in Flash...
Mylenium

Exporting Large Files for Web Use

Most of my images are around 3000x2000 in filesize and between 10MB and 15MB. They are for use on the web so I don't want them to be too large (in MB's.)
What is the best option:
- keep original size and lower the quality-setting from 100% to -let's say- between 75% and 90%
- Resize them -let's say- to half size.
The large files have more pixels but are lower quality, or the resized files are higher quality but have less pixels - what is the best?

You don't need to but it is advisable as scaling always makes images soft.
You have to scale to display an image on a monitor as a monitor is a very
low resolution device. Luckily you can do the sharpening straight in the
export dialog and you don't really need to think about it. Sharpen for
screen at standard setting is usually just fine. So try using the following
settings in the export dialog:
File settings: jpeg, quality 75, Color Space sRGB
Image Sizing: resize to fit long edge, 800 pixels
Output sharpening: Sharpen for screen, amount Standard
Metadata: Minimize embedded metadata (preserves your copyright info
but omits all the edit and
camera info)
Then play
around with the sharpening amount and compare the exports to see what
you prefer. There is very little difference between High and Standard.

I only have the exported .zip file for a project, can I import to captivate and make a .cptx source file?

I am working on a multi-person team with Captivate 7. The CPTX source file cannot be located for one module. We have the exported .zip files in our Version Control system. Can I take these files and recreate the .cptx file. I don't mind having to recreate a little functionality, but am hoping to avoid starting from the beginning with this file.
I know this can be done for RoboHelp files, was hoping some script existed for Captivate as well.

You might be able to save a bit of headache by extracting the content of the zip. Likely a SWF will be inside along with other files. You could then play the SWF and capture the screens. Might save a tiny bit of effort.
Cheers... Rick

How Can I export Sound Files for Sound mixing?

Can someone please explain me the process of exprting sound sound files for the Sound Mixer & Composer? How do I deliver it to them?

Welcome to the forum.
First, what version of PrE are you using, and then, on what OS version?
In general (specifics can come, with the above info), one would Share/Publish+Share (or Export in older versions) the Timeline as an intermediate Audio-only file. That would be Imported, or Opened in the audio-editor program.
In PrE 11, or 12, one would go to Publish+Share, and then Computer. There, they would scroll down the list, to Audio. Note: the scroll bars are not easy to see, but easy to miss. Look to the far right of the Panel. With Audio selected, choose PCM/WAV @ 48KHz 16-bit. That will get you the best file to edit further with your DAW. When that editing is complete, use PCM/WAV @ 48KHz 16-bit, then Import the resultant edited Audio file into the PrE Project, placing it on an empty Audio Track, say Audio 2, or 3. To maintain its position, I would place the CTI (Current Time Indicator) at exactly the point that you want that edited Audio file to be, perhaps at the start of the Timeline. Then, with Snap turned ON, the edited Audio file should snap to the CTI.
When it is in place, you can Delete the other Audio (that which you exported for additional editing), or just go to the Audio Mixer, and check Mute for any Tracks, that contain that original material.
Hope that helps, and if you can let us know a bit more, then someone can step you through any "gray areas," for your specific version.
Good luck,
Hunt

Export ipa file for an iPhone application

Similar Messages

Maybe you are looking for