How Can I export Sound Files for Sound mixing?

Can someone please explain me the process of exprting sound sound files for the Sound Mixer & Composer? How do I deliver it to them?

Welcome to the forum.
First, what version of PrE are you using, and then, on what OS version?
In general (specifics can come, with the above info), one would Share/Publish+Share (or Export in older versions) the Timeline as an intermediate Audio-only file. That would be Imported, or Opened in the audio-editor program.
In PrE 11, or 12, one would go to Publish+Share, and then Computer. There, they would scroll down the list, to Audio. Note: the scroll bars are not easy to see, but easy to miss. Look to the far right of the Panel. With Audio selected, choose PCM/WAV @ 48KHz 16-bit. That will get you the best file to edit further with your DAW. When that editing is complete, use PCM/WAV @ 48KHz 16-bit, then Import the resultant edited Audio file into the PrE Project, placing it on an empty Audio Track, say Audio 2, or 3. To maintain its position, I would place the CTI (Current Time Indicator) at exactly the point that you want that edited Audio file to be, perhaps at the start of the Timeline. Then, with Snap turned ON, the edited Audio file should snap to the CTI.
When it is in place, you can Delete the other Audio (that which you exported for additional editing), or just go to the Audio Mixer, and check Mute for any Tracks, that contain that original material.
Hope that helps, and if you can let us know a bit more, then someone can step you through any "gray areas," for your specific version.
Good luck,
Hunt

Similar Messages

How can I export to PDF for Offset printing including color and grayscale photo's?

After reading dozens of forum, I still don’t found the answer.
I made a photobook with full-colur and B/W photos for Offset printing. I want the B/W to be in grayscale to avoid color possible color shades. It seems InDesign doesn’t support grayscale, the images become way to dark. Even with exporting without any colour conversion or destination and/or including original colour profiles, the grayscale pictures are being exported to dark to PDF.
How can I export to PDF for Offset printing including color and grayscale photo’s?

Yes, the Photoshop & ID CMYK working spaces are the same
This can get difficult because the 3 programs handle soft proofing differently.
The working spaces don't matter, it's the document profile(s) that manage the preview. So here is the same grayscale image placed in ID on top and PS on the bottom. I've set my Photoshop info to show the doc profile in the lower left corner. I can see my InDesign's Document CMYK profile in my Proof Setup (the Working CMYK is different and isn't being used). Both profiles are effectively the same Coated FOGRA39 (Black Ink FOGRA in the case of PS).
But the previews don't match because I have Overprint turned off, so the InDesign preview is Gamma 2.2 or a "screen" media preview.
If I turn on Overprint preview I get a match because I'm soft proofing for print:

How can i build RPMs file for my own Java Application?

How can i build RPMs file for my own Java Application?....I have my own directory that contains all Java Source files and some files that my Application required....I want to build RPMs file like a install File to Linux System, Now my OS is Linux Fedora core 1.....How can i do this?

I think that in order to create a RPM, you'd need to
use some C.Nope - the RPM is all about packaging and the "magic" x.spec file. You can have anything you want in the RPM, but you have to use RPM tools to build the .rpm file. One of the features is that you can also indicate (via "install" scripts) modifications to other files or the filesystem to support the installation of whatever's in the RPM.

How can I export a file with transparent background?

Hi all,
I know InDesign doesn't allow to export a PNG file, but I need my file to be in image file format with transparent background.
I'm still learning so I am stuck here. How can I export a file with transparent background?

If you can't get the PNG file export to work, you can export a pdf and open it in Photoshop, from there you can save it as whatever you like.

Hey guys, my question is how can I export midi files from new garageband 10/ 2013? Thanks

Hey guys, my question is how can I export midi files from new garageband 10/ 2013? Thanks

77music wrote:
how can I export midi files from new garageband 10/ 2013?
unfortunately, like the previous 6 versions of GB, MIDI export is not supported. you would need to open the file in Logic in order to do that

How can I convert .mov files for use with other apps?

When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
Thanks - J
RS720G Windows XP

Kodak Digital Camera QuickTime MOV Problems
After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
From here, however, there are still a few snags to untangle.
The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

How can i write properties file for Hindi font

Hi All,
i'm using jdev 11.1.1.5.0
in my use case i have worked on internationalization where i want to use hindi font
like this link -
Majid Hussain: Internationalization of ADF 11.1.1.3 Applications
as in above post majid used german language and write properties file for german language(which is using english character).
but my problem is that i want to use hindi language
so how can i write propery file which support hindi font.
Manish

Hi Manish,
We also had same requirement where we need to show indian local language(Hindi ,Bengali and many more ).
We had implemented following approach and perhaps it will helpful for you.
1-First we changed the encoding value in jdeveloper.
go to jdeveloper --> tools --->preference-->encoding , select to UTF8
2-We used to get the properties and it's translated value from business and then we were manually put these pair into related resource bundle.
And using this we were able to implemented multilanguage support.
Thanks
Prateek

How can I export a file that may use in Final Cut Pro?

Hello friends,
May I know how to export a file that I can use it Final Cut Pro???

If you are talking about rendering then just use any production codec that FCP supports. You have access to them all. Use the Render Cue or create a custom preset in the Adobe Media Encoder.
If you want to do something like dynamic link with FCP, that does not exist. You can save a PPro project as a FCP XML but any PPro effects or PPro settings unique to PPro will not come across. If you turn an After Effects project into a FCP project by going through PPro as was suggested then you will NOT get any of the effects you applied to your composition or any of the animation or anything but the footage In and Out points, opacity, rotation and position because that is all that will be moved into PPro because After Effects plug-ins are not compatible with PPro. If there is a dynamic link to an AE project in your PPro project that will not move to FCP at all. You'll get nothing.
So the long and short of it is if you want the work that you have done in AE to show up in FCP you must render the project. I use ProRez 444 10 bit for any work I do on FCP. You can make a custom Output Module preset to help speed up the workflow.
If you are new to AE please read this on rendering: After Effects Help | Basics of rendering and exporting
If you are really new please go through these three tutorials: Basic Workflow

How can I make .jar files for applications?

My jar program creates jar files but won't open the program when I double click them. I use the command:
jar cvf *.jar filenames
The jar file is created but won't execute. Can anyone tell me what i am doing wrong?
Thanks
Jiby

Hello !
Well, I had the same problem a week or two ago !
First, in your *.java, don't use any package...I mean, don't do a package of your program (I guess there is a way to make it work with, but it would need a little bit more work...).
Then, with the jar tools, use the command
-jar cf jar_that_you_want_to_create.jar class-that_you_include_in_your_jar.class
With that, a jar will be created, and when you will try to "run" it, it will say that it can not find the main class...
You need a Manifest !
Create a text file MyManifest.text, and write that in your text file :
Main-Class: classname
follow the same as i wrote above. leave a blank after colon and a blank line after the first line like above.
then, well, use tha jar tool again:
-jar umf MyManifest.txt jar-file-you-created.jar
To "run" it, double click on it, or use the java tool:
java -jar jar_you_created.jar
Thanks to Phani, who helped me with that !!
Splitsch

How can i export the results for this loop

Hi all
i wrote a script to do nslookup for a list of web sites here is the code i wrote
$servers = get-content "C:\NSLOOKUP.txt"
foreach ($server in $servers) {
$addresses = [System.Net.Dns]::GetHostAddresses($server)
foreach($a in $addresses) {
"{0},{1}" -f $server, $a.IPAddressToString
} | Export-Csv 'C:\scripts\output.csv' -NoType
but it didn't export shall you support me on this

Hi,
Try it this way:
Get-Content .\wwwList.txt | ForEach {
$addr = [System.Net.Dns]::GetHostAddresses($_)
$props = @{
Name = $_
Addresses = $addr.IPAddressToString -join ','
New-Object PsObject -Property $props
} | Sort Name | Export-Csv .\wwwList.csv -NoTypeInformation
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

How can I get missing files for Classroom in a Book?

I bought Classroom in a Book for Premiere Pro CS 5 and some of the lessons are missing the audio/video that I need to complete these lessons. I know this isn't directly an Adobe problem, but I'd appreciate it if someone knew a place online I could go or someone at Adobe Press I could email to deal with this problem.
-- John Dorschner, Miami Shores FL

How is that some are missing and assumeably ..others are not?
Its a CD ROM isnt it?
http://www.adobepress.com/
(Contact Us bottom of the page)

How to Generate a Java file for a JSP Page

Hi ,
I am using weblogic11 .
I am working on a JSP page which nearly consists of 4000 lines of code.
I need to debug the file , but weblogic server is not generating the java file for the JSP pages .
Please let me know how can i genertae Java file for the jsp pages ??

JSPs are compiled into servlets automatically and those classes are stored in WEB-INF/classes folder. Servlet engine handles servlets.

How can we open any file using JAVA...

Hi all
i trying to make code in that code i choose a file using a filechooser then put that file name in FILE object like (File file = fileChooser.getSelectedFile();)
but the thing is how can i open that file for example if that file is HTML file then opens in IE or if that file is MS Word document that open in Word, like that
is there any suggestions
Thanx
Regards
Satinderjit

start is a windows command-line utility.
start foo.doc will start Word (or Star Office or Word Perfect or whatever is registered for the .doc extension),
start bar.htmnl will start your registered browser etc.

Can I Export midi files out of garageband 1.1

Can I Export midi files out of garageband 1.1. If so, How?

77music wrote:
how can I export midi files from new garageband 10/ 2013?
unfortunately, like the previous 6 versions of GB, MIDI export is not supported. you would need to open the file in Logic in order to do that

How can i export a 24bit avi file from photoshop for mac?

how can i export a 24bit avi file from photoshop for mac? i have a client that specificly needs the files to be avi and in 24bit what are the settings that i need to use to export the video using photoshop on a mac?

Hello,
To make a 24-bit AVI file in Photoshop, go to File>Export>Render Video. Then, under File Options, choose AVI from the Quicktime Export drop-down menu. Click the Settings button. Click the Settings button in the AVI Settings window. Change Compression to None, and then choose "Millions of Colors" from the Depth drop-down under Compression.
The Millions of Colors option is for 24-bit video (8-bit R+G+B channels, 8x3=24). Millions of Colors+ is for 32-bit video (24-bit video plus an 8-bit alpha channel).
-Brett

How Can I export Sound Files for Sound mixing?

Similar Messages

Maybe you are looking for