Export  it_drseg FROM it_t_drseg to MEMORY ID 'DRSEG_MAT'

Export  it_drseg FROM <it_t_drseg> to MEMORY ID 'DRSEG_MAT' is going for dump :
Logic in BADI :
Export  it_bseg     FROM ti_bseg      TO   MEMORY ID    'DRSEG_MAT'.
  Export  it_drseg    from <IT_T_DRSEG> To  MEMORY ID 'DRSEG_MAT'.
  export  it_bseg_mat FROM ti_bseg_mat  TO MEMORY ID 'DRSEG_MAT'.
Error analysis
    For the statement "EXPORT/IMPORT ...", object references,
    interface references, and data references
    are currently not supported."
How to correct the error
    Only export/import the referenced data and not the references.
How can I export the data from field sysmbol to Memory ID .
Thanks ,

Actually the issue is with the type of Internal table there is TYPE REF to Field in the new version of SAP EHP5.
So for this we cannot use Export, so do you have any idea how to export Type Ref To fields .
T YPES: BEGIN OF mmcr_drseg.
        INCLUDE STRUCTURE drseg.
TYPES: cr LIKE drseg_cr OCCURS 0,
       co TYPE mmcr_drseg_co OCCURS 0,
       sm LIKE drseg_sm OCCURS 0,
       charact TYPE rbcharact_instance OCCURS 3,
                                       "instances of characteristics
       uebgmat  TYPE matnr,
       uebrblgp TYPE rblgp,
       selkz_db TYPE selkz,
       rblgp_old TYPE rblgp,           "rblgp before aggregation
      * tmref    TYPE REF TO erptm_s_iv_data,                "TM EhP5e*
       END OF mmcr_drseg.
tmref    TYPE REF TO erptm_s_iv_data,                "TM EhP5e
this was added in EHP5 for ECC,  so we are unable to export the data.
so could you tell me how can we export Referanced data type.
Edited by: Varun on May 13, 2011 3:29 AM

Similar Messages

  • How to export photos from iPhoto to memory card SanDisk

    Hi;
    I am trying to move photos from iPhoto to a flash drive. In the flash drive I have a SanDisk memory card in a Kodak 50-IN-1 Card reader and I put it into the drive. I have tried to open iphoto click on the photo, go to file click on export and it. The photo shows up in the flash drive port, I can click on it and see it but when I take the disk and try to re-upload the disk the photo will not show up on iphoto nor will it show up in the camera.
    The second way I tried was to create a folder, copy to the folder and the drag folder to the device. I again ended up with the same results.
    Why will it show up in the device when I click on the device but the photo will no show up in iphoto or when I put the disk into the camera?
    Tom

    Most cameras expect photos to be in specific folder(s) on the card and to have file names in specific formats. My Canon G12, for example, uses a structure like this:
    CANON_DC
    ....DCIM
    ........100___01
    ............IMG_0001.CR2
    ............IMG_0001.JPG
    ............more photos
    ........100___02
    ............IMG_0007.CR2
    ............IMG_0007.JPG
    .............more photos
    (My camera is set to create a new folder every month, but there are other options. One of my previous cameras went to a new folder every hundred photos.)
    Examine a card formatted by your camera with some pictures taken by your camera to discover what sort of file structure and filenames your camera creates, then mimic that.
    On the re-import side, iPhoto and Image Capture know about the common file structures and filenames, so it recognizes them when it sees them. Dropping long, random names in the top level of the card as illustrated in the video is likely only to work when you view the card on another system with a general file structure with an application that makes full use of it (like Finder or Windows Explorer).

  • CR2008 Not enough memory while exporting reports from Crystal Reports 2008

    I have recently upgraded our Crystal Reports version from Crystal Reports Basic for Visual Studio 2008 to Crystal Reports 2008. After upgradation I am facing the problem "Memory full.OtherErrorFailed to export the report. Not enough memory for operation" when I am trying to export the report from Crystal Reports 2008 Report viewer, or directly from the code behind. The application is hosted application. The problem occurs in our production environment.
    Server details:
    OS: Windows 2003 Enterprise Edition R2 with SP2
    IIS: IIS 6
    .Net Framework: 3.5
    Application details:
    Hosted application using Crystal Reports 2008 SP 3
    Crystal Reports Viewer version: 12.0.2000.0
    The data binding of the report object is done through an ADODB dataset.
    Web.Config:
    <configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
      <configSections>
        <sectionGroup name="businessObjects">
          <sectionGroup name="crystalReports">
            <section name="printControl" type="System.Configuration.NameValueSectionHandler" />
            <section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler" />
          </sectionGroup>
        </sectionGroup>
      </configSections>
      <businessObjects>
        <crystalReports>
          <printControl>
            <add key="url" value="http://myserver/mysite/PrintControl.cab" />
          </printControl>
          <crystalReportViewer>
            <add key="documentView" value="weblayout" />
          </crystalReportViewer>
        </crystalReports>
      </businessObjects>
      <appSettings>
        <add key="CrystalImageCleaner-AutoStart" value="true" />
        <add key="CrystalImageCleaner-Sleep" value="60000" />
        <add key="CrystalImageCleaner-Age" value="120000" />
      </appSettings>
      <system.web>
        <httpHandlers>
          <add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        </httpHandlers>
        <compilation debug="false">
          <assemblies>
            <add assembly="CrystalDecisions.Data.AdoDotNetInterop, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
            <add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
            <add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
            <add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
            <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
            <add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
            <add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
            <add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
          </assemblies>
      </system.web>
      <system.webServer>
         <handlers>
             <add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode" />
         </handlers>
      </system.webServer>
    </configuration>
    Sample Code:
    Report = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
    Report.Load(Server.MapPath(strReportPath));
    Report.SetDataSource(dsReport);
    Creportviewer.ReportSource = Report;
    For exporting the report to PDF
    string Filename = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.InternetCache).ToString(), Guid.NewGuid().ToString() + ".pdf");
    Report.ExportToDisk(ExportFormatType.PortableDocFormat, Filename);
    Clean Up Code: (Page_UnLoad event)
    if (Report != null)
         Report.Close();
         Report.Dispose();
    Creportviewer.ReportSource = null;
    Creportviewer.Dispose();
    dsReport = null;
    GC.Collect();
    GC.WaitForPendingFinalizers();
    Can someone help me resolve the issue.

    The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save.  Presumably the 12MB file size is because of the 24bit PNG we have as our background.
    The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
    When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full".  If we export only page 1 of the 3 pages, it also returns a Memory full error.  However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
    The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything).  The process runs up to about 1GB before reporting the memory full error.
    We've also tried a variety of other suggestions posted in the other thread with no success.
    We're happy to provide the RPT file to the Report Team to diagnose the problem.  Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
    Our preferred scenario is fixing problem 2.  The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size.  However, the API reports memory full.
    The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing.  When executing, it uses up to about 1.1GB before reporting the error.
    Are there any other suggestions for fixing what we have?  Are there known problems with large images in reports?  Do we need to lodge a formal support request?
    Regards,  Grant.
    PS.  Grr and my message formatting is lost when I edited this message!!!
    There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
    Edited by: grantph on Sep 30, 2009 2:49 AM

  • How do I export photos from iphoto to a memory card?

    How do I export photos from iphoto to a memory card?

    Not using the correct structure. Camera's use a very exact structure and the only way the camera will see photos on the card is for them to be in that exact structure
    LN

  • How do you export messages from Ovi Suite?

    As the title says, how do you export messages from Ovi Suite?
    I know how to export messages from Nokia PC Suite, but it doesn't seem to be possible in the new Nokia Ovi Suite.
    Here is how I would do it in the Nokia PC Suite.
    1. I click the Messages icon to open Nokia Communication Center.
    2. I click on the Messages option on the left pane to view only messages.
    3. In the main window I mark the messages I want to export.
    4. Then I go to File menu and chose Export.
    5. Choose destination folder and I'm all set to export my messages from my Nokia.
    I can chose between the formats CSV and VMG (vMessage) for export. If more than one message is marked only the CSV format is available. But what you can do to export several messages in the VMG format is to mark them all in the main window and press CTRL+C or right click and chose Copy to copy them all to RAM memory. Then all you have to do is create an empty folder on the desktop and paste them in there by pressing CTRL+V or right clicking and chosing Paste.
    That's all there is to it, using Nokia PC Suite. So how do you do this in Nokia Ovi Suite? You don't, right?
    And this **bleep** Ovi Suite is supposed to replace PC Suite?
    Thank God I won't be needing neither of them much longer. I am switching to Android and HTC. Good luck with Ovi, the Ovi Player, the Ovi Suite, the PC Suite, the Symbian, the S60, the Symbian^1 (S60 5th edition), the Symbian^3, the Symbian^4 and what not.

    I believe OVI took a step in the right direction with this option. I also believe it was made available due to the fact that OVI Suite cannot take a huge number of messages altogether. This option was made available so that the messages could be backed up.
    However, I'd like to suggest the following, if possible.
    1. Make Nokia OVI Suite be able to handle a huge number of messages.
    2. Have the option to export only selected messages.
    Nokia 701 Dark Steel on Belle FP2

  • Unable to Export data from Forms in 11.5.10.2

    Hi All,
    When I am trying to export data from a Form, the output is not appearing on my desktop to save or view for further processing. When I click on File-->Export link, a screen appears for a fraction of second and then disappears automatically.
    And it is generating the below error file in my desktop.
    # A fatal error has been detected by the Java Runtime Environment:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x006e0065, pid=4988, tid=3864
    # JRE version: 6.0_29-b11
    # Java VM: Java HotSpot(TM) Client VM (20.4-b02 mixed mode, sharing windows-x86 )
    # Problematic frame:
    # C 0x006e0065
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    --------------- T H R E A D ---------------
    Current thread (0x033a1c00): JavaThread "AWT-Windows" daemon [_thread_in_native, id=3864, stack(0x00960000,0x00a60000)]
    siginfo: ExceptionCode=0xc0000005, reading address 0x006e0065
    Registers:
    EAX=0x070bf4d0, EBX=0x00000001, ECX=0x034a7a30, EDX=0x00000004
    ESP=0x00a5fae0, EBP=0x00a5fb0c, ESI=0x033a1d28, EDI=0x034a7a30
    EIP=0x006e0065, EFLAGS=0x00010293
    Top of Stack: (sp=0x00a5fae0)
    0x00a5fae0: 6d09ccc0 00a5fb74 6d09c780 00000000
    0x00a5faf0: 00000000 00000001 033a1d28 00a5fae4
    0x00a5fb00: 00a5fb90 6d0c0628 00000001 00a5fb38
    0x00a5fb10: 7e418734 001002d0 0000981a 034a7a30
    0x00a5fb20: 00000000 6d09c780 dcbaabcd 00000000
    0x00a5fb30: 00a5fb74 6d09c780 00a5fba0 7e418816
    0x00a5fb40: 6d09c780 001002d0 0000981a 034a7a30
    0x00a5fb50: 00000000 00a5fc34 00a5fc2c 005de248
    Instructions: (pc=0x006e0065)
    0x006e0045:
    [error occurred during error reporting (printing registers, top of stack, instructions near pc), id 0xc0000005]
    Register to memory mapping:
    EAX=0x070bf4d0 is an unknown value
    EBX=0x00000001 is an unknown value
    ECX=0x034a7a30 is an unknown value
    EDX=0x00000004 is an unknown value
    ESP=0x00a5fae0 is pointing into the stack for thread: 0x033a1c00
    EBP=0x00a5fb0c is pointing into the stack for thread: 0x033a1c00
    ESI=0x033a1d28 is an unknown value
    EDI=0x034a7a30 is an unknown value
    Stack: [0x00960000,0x00a60000], sp=0x00a5fae0, free space=1022k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    C 0x006e0065
    C [USER32.dll+0x8734] GetDC+0x6d
    C [USER32.dll+0x8816] GetDC+0x14f
    C [USER32.dll+0x89cd] GetWindowLongW+0x127
    C [USER32.dll+0x8a10] DispatchMessageW+0xf
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    j sun.awt.windows.WToolkit.eventLoop()V+0
    j sun.awt.windows.WToolkit.run()V+52
    v ~StubRoutines::call_stub
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x07294400 JavaThread "SysExecutionThead" daemon [_thread_blocked, id=328, stack(0x04830000,0x04880000)]
    0x0351e400 JavaThread "AWT-EventQueue-3" [_thread_blocked, id=4484, stack(0x046f0000,0x04740000)]
    0x06f3a400 JavaThread "Flush Queue" [_thread_blocked, id=5560, stack(0x0a530000,0x0a580000)]
    0x073b5400 JavaThread "Thread-20" [_thread_in_native, id=3872, stack(0x09f40000,0x09f90000)]
    0x06dc1400 JavaThread "CursorIdler" [_thread_blocked, id=2808, stack(0x09ef0000,0x09f40000)]
    0x07079c00 JavaThread "TaskScheduler timer" [_thread_blocked, id=2824, stack(0x09ea0000,0x09ef0000)]
    0x070bc400 JavaThread "Keep-Alive-Timer" daemon [_thread_blocked, id=5280, stack(0x045b0000,0x04600000)]
    0x07607400 JavaThread "Busy indicator" daemon [_thread_blocked, id=4924, stack(0x09e50000,0x09ea0000)]
    0x034f7c00 JavaThread "Forms-StreamMessageReader" [_thread_blocked, id=3856, stack(0x07960000,0x079b0000)]
    0x06d18400 JavaThread "thread applet-oracle.forms.engine.Main-3" [_thread_in_native, id=640, stack(0x07910000,0x07960000)]
    0x02ceb400 JavaThread "D3D Screen Updater" daemon [_thread_blocked, id=1568, stack(0x04880000,0x048d0000)]
    0x034e2c00 JavaThread "thread applet-oracle/apps/fnd/formsClient/FormsLauncher.class-2" [_thread_blocked, id=5788, stack(0x04790000,0x047e0000)]
    0x033dac00 JavaThread "Applet 4 LiveConnect Worker Thread" [_thread_blocked, id=4080, stack(0x047e0000,0x04830000)]
    0x034d8000 JavaThread "Thread-14" [_thread_in_native, id=5068, stack(0x04740000,0x04790000)]
    0x034da000 JavaThread "LPR" [_thread_blocked, id=2720, stack(0x046a0000,0x046f0000)]
    0x034dd400 JavaThread "Thread-12" [_thread_blocked, id=5720, stack(0x044e0000,0x04530000)]
    0x0345e400 JavaThread "AWT-EventQueue-1" [_thread_blocked, id=4848, stack(0x04650000,0x046a0000)]
    0x0345d400 JavaThread "TimerQueue" daemon [_thread_blocked, id=4800, stack(0x04600000,0x04650000)]
    0x03413800 JavaThread "thread applet-unitask.localPrint.clientAppletLauncher-1" [_thread_blocked, id=3184, stack(0x043f0000,0x04440000)]
    0x033ea000 JavaThread "JVM[id=0]-Heartbeat" daemon [_thread_blocked, id=5900, stack(0x04490000,0x044e0000)]
    0x033e6c00 JavaThread "AWT-EventQueue-2" [_thread_blocked, id=3036, stack(0x04440000,0x04490000)]
    0x033e4c00 JavaThread "Applet 3 LiveConnect Worker Thread" [_thread_blocked, id=5652, stack(0x03790000,0x037e0000)]
    0x033dd800 JavaThread "Browser Side Object Cleanup Thread" [_thread_blocked, id=1008, stack(0x043a0000,0x043f0000)]
    0x033d7000 JavaThread "Windows Tray Icon Thread" [_thread_in_native, id=4576, stack(0x03920000,0x03970000)]
    0x033d5000 JavaThread "CacheCleanUpThread" daemon [_thread_blocked, id=4136, stack(0x038d0000,0x03920000)]
    0x033ae400 JavaThread "CacheMemoryCleanUpThread" daemon [_thread_blocked, id=3632, stack(0x03880000,0x038d0000)]
    0x033a8400 JavaThread "SysExecutionTheadCreator" daemon [_thread_blocked, id=4468, stack(0x03330000,0x03380000)]
    0x033a5c00 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=4164, stack(0x037e0000,0x03830000)]
    =>0x033a1c00 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3864, stack(0x00960000,0x00a60000)]
    0x033a0400 JavaThread "AWT-Shutdown" [_thread_blocked, id=2668, stack(0x03640000,0x03690000)]
    0x0339f000 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=2840, stack(0x035f0000,0x03640000)]
    0x02d84800 JavaThread "Java Plug-In Pipe Worker Thread (Client-Side)" daemon [_thread_in_native, id=5160, stack(0x035a0000,0x035f0000)]
    0x02da6000 JavaThread "Timer-0" [_thread_blocked, id=3064, stack(0x032e0000,0x03330000)]
    0x02d4d400 JavaThread "traceMsgQueueThread" daemon [_thread_blocked, id=4168, stack(0x031e0000,0x03230000)]
    0x02d39000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=1560, stack(0x02fb0000,0x03000000)]
    0x02d34000 JavaThread "C1 CompilerThread0" daemon [_thread_blocked, id=6076, stack(0x02f60000,0x02fb0000)]
    0x02d31800 JavaThread "Attach Listener" daemon [_thread_blocked, id=5804, stack(0x02f10000,0x02f60000)]
    0x02d30400 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1996, stack(0x02ec0000,0x02f10000)]
    0x02d29800 JavaThread "Finalizer" daemon [_thread_blocked, id=3760, stack(0x02e70000,0x02ec0000)]
    0x02d28000 JavaThread "Reference Handler" daemon [_thread_blocked, id=2708, stack(0x02e20000,0x02e70000)]
    0x00888000 JavaThread "main" [_thread_blocked, id=4944, stack(0x00910000,0x00960000)]
    Other Threads:
    0x02cec000 VMThread [stack: 0x02dd0000,0x02e20000] [id=3156]
    0x02d44000 WatcherThread [stack: 0x03000000,0x03050000] [id=5780]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation total 10048K, used 3925K [0x22990000, 0x23470000, 0x27ee0000)
    eden space 8960K, 43% used [0x22990000, 0x22d654f8, 0x23250000)
    from space 1088K, 0% used [0x23250000, 0x23250000, 0x23360000)
    to space 1088K, 0% used [0x23360000, 0x23360000, 0x23470000)
    tenured generation total 21996K, used 13195K [0x27ee0000, 0x2945b000, 0x32990000)
    the space 21996K, 59% used [0x27ee0000, 0x28bc2d50, 0x28bc2e00, 0x2945b000)
    compacting perm gen total 12288K, used 9062K [0x32990000, 0x33590000, 0x36990000)
    the space 12288K, 73% used [0x32990000, 0x332699b0, 0x33269a00, 0x33590000)
    ro space 10240K, 51% used [0x36990000, 0x36ebd0b8, 0x36ebd200, 0x37390000)
    rw space 12288K, 54% used [0x37390000, 0x37a29570, 0x37a29600, 0x37f90000)
    Code Cache [0x00af0000, 0x00d50000, 0x02af0000)
    total_blobs=1512 nmethods=1280 adapters=167 free_code_cache=31064896 largest_free_block=320
    Dynamic libraries:
    0x00400000 - 0x00424000      C:\Program Files\Java\jre6\bin\java.exe
    0x7c900000 - 0x7c9b2000      C:\WINDOWS\system32\ntdll.dll
    0x7c800000 - 0x7c8f6000      C:\WINDOWS\system32\kernel32.dll
    0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
    0x77e70000 - 0x77f03000      C:\WINDOWS\system32\RPCRT4.dll
    0x77fe0000 - 0x77ff1000      C:\WINDOWS\system32\Secur32.dll
    0x5cb70000 - 0x5cb96000      C:\WINDOWS\system32\ShimEng.dll
    0x71590000 - 0x71609000      C:\WINDOWS\AppPatch\AcLayers.DLL
    0x7e410000 - 0x7e4a1000      C:\WINDOWS\system32\USER32.dll
    0x77f10000 - 0x77f59000      C:\WINDOWS\system32\GDI32.dll
    0x7c9c0000 - 0x7d1d7000      C:\WINDOWS\system32\SHELL32.dll
    0x77c10000 - 0x77c68000      C:\WINDOWS\system32\msvcrt.dll
    0x77f60000 - 0x77fd6000      C:\WINDOWS\system32\SHLWAPI.dll
    0x774e0000 - 0x7761e000      C:\WINDOWS\system32\ole32.dll
    0x769c0000 - 0x76a74000      C:\WINDOWS\system32\USERENV.dll
    0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
    0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.DLL
    0x773d0000 - 0x774d3000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.6028_x-ww_61e65202\comctl32.dll
    0x7c340000 - 0x7c396000      C:\Program Files\Java\jre6\bin\msvcr71.dll
    0x6d7f0000 - 0x6da9f000      C:\Program Files\Java\jre6\bin\client\jvm.dll
    0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
    0x6d7a0000 - 0x6d7ac000      C:\Program Files\Java\jre6\bin\verify.dll
    0x6d320000 - 0x6d33f000      C:\Program Files\Java\jre6\bin\java.dll
    0x6d000000 - 0x6d14c000      C:\Program Files\Java\jre6\bin\awt.dll
    0x5ad70000 - 0x5ada8000      C:\WINDOWS\system32\uxtheme.dll
    0x4fdd0000 - 0x4ff76000      C:\WINDOWS\system32\d3d9.dll
    0x00ae0000 - 0x00ae6000      C:\WINDOWS\system32\d3d8thk.dll
    0x77c00000 - 0x77c08000      C:\WINDOWS\system32\VERSION.dll
    0x6d7e0000 - 0x6d7ef000      C:\Program Files\Java\jre6\bin\zip.dll
    0x6d420000 - 0x6d426000      C:\Program Files\Java\jre6\bin\jp2native.dll
    0x6d1d0000 - 0x6d1e3000      C:\Program Files\Java\jre6\bin\deploy.dll
    0x77a80000 - 0x77b15000      C:\WINDOWS\system32\CRYPT32.dll
    0x77b20000 - 0x77b32000      C:\WINDOWS\system32\MSASN1.dll
    0x77120000 - 0x771ab000      C:\WINDOWS\system32\OLEAUT32.dll
    0x3d930000 - 0x3da16000      C:\WINDOWS\system32\WININET.dll
    0x03050000 - 0x03059000      C:\WINDOWS\system32\Normaliz.dll
    0x78130000 - 0x78263000      C:\WINDOWS\system32\urlmon.dll
    0x3dfd0000 - 0x3e1bb000      C:\WINDOWS\system32\iertutil.dll
    0x6d6a0000 - 0x6d6e6000      C:\Program Files\Java\jre6\bin\regutils.dll
    0x6d600000 - 0x6d613000      C:\Program Files\Java\jre6\bin\net.dll
    0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
    0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
    0x6d620000 - 0x6d629000      C:\Program Files\Java\jre6\bin\nio.dll
    0x74720000 - 0x7476c000      C:\WINDOWS\system32\MSCTF.dll
    0x77b40000 - 0x77b62000      C:\WINDOWS\system32\apphelp.dll
    0x755c0000 - 0x755ee000      C:\WINDOWS\system32\msctfime.ime
    0x6d230000 - 0x6d27f000      C:\Program Files\Java\jre6\bin\fontmanager.dll
    0x6d780000 - 0x6d788000      C:\Program Files\Java\jre6\bin\sunmscapi.dll
    0x68000000 - 0x68036000      C:\WINDOWS\system32\rsaenh.dll
    0x5b860000 - 0x5b8b5000      C:\WINDOWS\system32\netapi32.dll
    0x71a50000 - 0x71a8f000      C:\WINDOWS\System32\mswsock.dll
    0x76f20000 - 0x76f47000      C:\WINDOWS\system32\DNSAPI.dll
    0x76d60000 - 0x76d79000      C:\WINDOWS\system32\iphlpapi.dll
    0x76d40000 - 0x76d58000      C:\WINDOWS\system32\MPRAPI.dll
    0x77cc0000 - 0x77cf2000      C:\WINDOWS\system32\ACTIVEDS.dll
    0x76e10000 - 0x76e35000      C:\WINDOWS\system32\adsldpc.dll
    0x76f60000 - 0x76f8c000      C:\WINDOWS\system32\WLDAP32.dll
    0x76b20000 - 0x76b31000      C:\WINDOWS\system32\ATL.DLL
    0x76e80000 - 0x76e8e000      C:\WINDOWS\system32\rtutils.dll
    0x71bf0000 - 0x71c03000      C:\WINDOWS\system32\SAMLIB.dll
    0x77920000 - 0x77a13000      C:\WINDOWS\system32\SETUPAPI.dll
    0x76fb0000 - 0x76fb8000      C:\WINDOWS\System32\winrnr.dll
    0x76fc0000 - 0x76fc6000      C:\WINDOWS\system32\rasadhlp.dll
    0x662b0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
    0x71a90000 - 0x71a98000      C:\WINDOWS\System32\wshtcpip.dll
    0x6d1a0000 - 0x6d1c3000      C:\Program Files\Java\jre6\bin\dcpr.dll
    0x605d0000 - 0x605d9000      C:\WINDOWS\system32\mslbui.dll
    0x49460000 - 0x4986b000      C:\PROGRA~1\MICROS~2\Office14\GROOVEEX.DLL
    0x78520000 - 0x785c3000      C:\WINDOWS\WinSxS\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.30729.4148_x-ww_d495ac4e\MSVCR90.dll
    0x78480000 - 0x7850e000      C:\WINDOWS\WinSxS\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.30729.4148_x-ww_d495ac4e\MSVCP90.dll
    0x78e20000 - 0x78e4b000      C:\WINDOWS\WinSxS\x86_Microsoft.VC90.ATL_1fc8b3b9a1e18e3b_9.0.30729.4148_x-ww_353599c2\ATL90.DLL
    0x74980000 - 0x74aa3000      C:\WINDOWS\system32\msxml3.dll
    0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
    VM Arguments:
    jvm_args: -D__jvm_launched=6364512386 -Xbootclasspath/a:C:\PROGRA~1\Java\jre6\lib\deploy.jar;C:\PROGRA~1\Java\jre6\lib\javaws.jar;C:\PROGRA~1\Java\jre6\lib\plugin.jar -Dsun.awt.warmup=true
    java_command: sun.plugin2.main.client.PluginMain write_pipe_name=jpi2_pid2020_pipe7,read_pipe_name=jpi2_pid2020_pipe6
    Launcher Type: SUN_STANDARD
    Environment Variables:
    PATH=C:\Program Files\PC Connectivity Solution\;C:\Program Files\CA\SharedComponents\CAWIN\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\Core-Static;C:\PROGRA~1\CA\SHARED~1\CAM\bin;C:\Program Files\CA\Unicenter DSM\bin;C:\Program Files\Windows Imaging\;C:\Program Files\Intel\DMIX
    USERNAME=aggarwalam
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
    --------------- S Y S T E M ---------------
    OS: Windows XP Build 2600 Service Pack 3
    CPU:total 4 (4 cores per cpu, 1 threads per core) family 6 model 23 stepping 10, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1
    Memory: 4k page, physical 3665072k(2703832k free), swap 5592752k(4834108k free)
    vm_info: Java HotSpot(TM) Client VM (20.4-b02) for windows-x86 JRE (1.6.0_29-b11), built on Oct 3 2011 01:01:08 by "java_re" with MS VC++ 7.1 (VS2003)
    time: Mon Jul 02 09:18:26 2012
    elapsed time: 108 seconds
    Can anyone please help me on this.
    Thanks in advance.
    Regards,
    Charls K V

    When I am trying to export data from a Form, the output is not appearing on my desktop to save or view for further processing. When I click on File-->Export link, a screen appears for a fraction of second and then disappears automatically.Please add the application URL to the trusted sites list from the browser.
    Also, make sure all pop-up blockers are disabled.
    And it is generating the below error file in my desktop.Is this the same error you get in the Jinitiator/JRE console window? -- How to enable tracing and logging for Sun JRE (Native Plug-in) [ID 549423.1]
    Please make sure no errors are reported in the database file log.
    Also, please see these docs/links.
    Troubleshooting Export and Attachment issues in Oracle Applications 11i [ID 338651.1]
    How to Troubleshoot Forms Hanging Using Export Functionality [ID 423261.1]
    Attachments and Exports, a Troubleshooting Guide [ID 135444.1]
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Export+AND+Troubleshooting&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Export+AND+Disappear&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Exporting an internal table to memory

    Hi
      I want to call an program from another program and want the values stored in an internal table used in the called program.
    how can i export an internal table to memory id an then import it.
    Regards
    Arun

    So to be clear, for your requirement it would be:
    * Towards the end of the called program
      EXPORT it_itab TO MEMORY ID 'ZZ_MEM_ID'.
    * And then from calling program after the submit zzzz and return statement
      IMPORT it_itab FROM MEMORY ID 'ZZ_MEM_ID'.
    Hope that helps.
    Brad
    Message was edited by: Brad Williams (put back intro text)
    Message was edited by: Brad Williams

  • Export PDF from InDesign Book

    Hi, I have a customer that has huge problems to export PDFs from InDesign Books. He has books with many documents with a total amount of 500-700 pages, when he try to export a PDF InDesign quit unexpectedly. I wrote a script for him that export the PDF from the book without the progress bar, and sometimes it solves the problem but sometimes not, and I have a "out of memory" message. He must export multiple PDF from the same book and then merge those PDF with Acrobat but he has also interactivity sometimes and it's a nightmare to merge PDFs with interactive objects and bookmarks.  Someone of you have experienced the same problem (and maybe has a solution)?  Thank you

    It seems that InDesign saturate the available RAM during the operation of gathering information before start to export, if I restart InDesign each time and export a selection of documents it works. I'm exporting now two separate PDF and it seems to work, but again only if I close and restart InDesign before exporting, I'm working on an iMac with an Intel 2.93 GHz i7 and a total of 8 GB RAM.

  • Exporting slideshow from iphoto to idvd /message says" disc is full"

    when exporting slideshow from iphoto to idvd /message says" disc is full" It is a new mac with 2gb extra memory. I have cleared out all extraneous files, so there should be room on the disc. Help, this is a student''s work and would love to help them burn the dvd slideshow.

    Patricia
    IS this your Hard Disk is full?
    OS X needs about 10 gigs of HD space to function normally. It uses this space for things like Virtual Memory and temporary files and other OS operations.
    I have cleared out all extraneous files, so there should be room on the disc
    How did you do this? Did you empty the trash?
    Regards
    TD

  • Download jpeg photos to iPad from a flash memory card

    I exported JPG photos using Iphoto to a usb flash memory card in a DCIM folder. I want a friend to download these photos on his Ipad.
    I can use the Finder to display any of these photos from the flash memory card. So they exported right.
    But his Ipad 2 with the latest IOS version does not see any photos when the flash memory card is connected to it using the usb connector.
    The memory card has been formatted in MS-DOS
    When I connect the flah memory card back to my Imac, I see all photo files with the Finder.
    Iphoto sees the flash memory card but does not see any photos it exported.
    How can I solve this?

    Thank you for your suggestion.
    Sorry, I used the terms usb flash memory card, I should have used USB flash drive in my question.
    I tested your suggested solution. I changed the name of the photo to: I45.jpg and the result is the same. I always get the message "NO PHOTO CAN BE IMPORTED".
    Any other suggestion?

  • How do I export video from a Canon Optura 30 camcorder to my iMac/ iMovies? I've tried a Firewire cable but imovies doesn't seem to recognise the camcorder.

    I've been trying to export video from my Canon Optura 30 camcorder to imovies with a firewire lead, however nothing happens and imovies doesn't semm to reconise the camcorder. Can anyone help please?

    Here is a compatibility chart for iMovie:
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    I did not see yours; however, as long as it has firewire, it should work. Did you read the instructions in both your camcorder manual and in iMovie on the steps needed?
    If you can't get it to work after following the steps, what format does it record in? Is it on a memory card? If so, it'd be easy: just use a USB card reader, plug it in and import your footage that way.

  • Is there any way to delete saved messages from IPhone 4 memory?

    Is there any way to delete saved messages from IPhone 4 memory?

    Firstly you DO NOT have to do a factory reset / wipe device, it is simply not required to get the space back!!
    Mine had 3GB and I just got rid of it all, here is how:
    Make a backup in iTunes
    open iBackupBot (Google it)
    Go to the relevant backup
    Click on Multimedia File Manager and click on the other Multimedia files tab
    Sort by filename by clicking the Filename tab
    Find MediaDomain/Library/SMS/Attachments and highlight all of them, then press delete.  You can also click to export to a folder of your choice, if you want to save them that is. 
    Then go to System Files>MediaDomain>Library>SMS>Attachments
    They will be all listed here, highlight them all and press delete
    Then just restore that backup using iTunes! 
    Tadaa! Space recovered, your messages are still there but without the attachments! 
    P.S You may want to make two backups in case you get any of the above steps wrong, but it is simple to follow the above and not do anything wrong!

  • Export music from itunes to card reader for voyager mobile phone

    i just bought a voyager mobile phone from verizon. was told to export music from itunes onto a memory card. but the card reader doesnt show when i open itunes. how can i export music into my voyager phone from itunes? can i do it directly or do i need a card reader? if so,how do i it?

    Only the iPod range and the iTunes enabled phones from Motorola are compatible with iTunes for Windows and with songs from the iTunes Music Store. If you have any standard iTunes songs that are DRM (Digital Rights Management) copy protected you won't be able to use them on a Non Apple device. Is the Phone or the Memory card showing as a mounted device on your desktop? Access the phone/card through Finder then drag and from what you wanted onto it from your iTunes Music folder.

  • How can I export photos from my iPad or iPod to my main computer or hard drive. My old computer died and I want to get my photos onto my new computer. Thanks in advance.

    HOw can I export photos from my iPad or iPod to my main computer? My old computer died with my photos on it but I want to move my photo library from my iPad or iPod to the computer I just bought. Thanks for any help you can give.

    Sorry but your iPhoto library is not on an iPad or iPod - you may have photos there (most likely low resolution copies) but not an iPhoto library - dying computers (along with software and human errors) are why you always must have a backup - now is the time to load it
    LN

  • Can not export data from form tracker

    Hi there,
         I have set up a lovely form for collecting data. It all comes into the Adobe Tracker and the Responses file fine.
         What i wish to do is export data from the responses file into another format. I should be able to do it from the Export button on the left but it is 'blanked out' and does nothing if I push it. I can't find any details on here or the internet relating to this. And yes, there is data in the file to export .
    Hoping you can help.
    Many thanks in advance.

    I have the same problem but... I created two forms for two separate purposes and have had responses to both.
    One of them allows me to export the data and the other does not.
    Does anyone out there have an answer for this seemingly random anomoly?
    Regards
    Sydman

Maybe you are looking for

  • Excel download from ALV grid, for characters more than 1020

    Hi, When i am trying to download the report which is having character more than 1020, it is coming in two rows. I want all fields in one row. Please give solutions. I am using below field catalog. Car Eligibility   CLEAR lw_fieldcat.   lw_fieldcat-fi

  • Safari 5.1 Crash in Lion

    I am having issues with safari 5.1 crashing. Happens in a number of circumstances such as trying to clicking on mail to links in web pages. Also, when trying to open java program. Here is the last crash log.  Any help would be appreciated. Thanks in

  • Anyone seen this problem with Excel 2003?

    We're developing a Microsoft Excel-based app. The help system uses HTML Help (.chm) format, and works just fine with Excel 2007 and 2010. However, since a lot of potential users out there are still using older versions, we've been asked to adapt the

  • Drag and Drop error - icons are stuck to the cursor

    For the last few days when I try to use drag and drop, the items stick to the cursor and cannot be dislodged without a force quit or a reboot. That is they drag, but they do not drop. This is really sub-optimal. Has this happened to anyone else? How

  • Date F4- Calendar to start with Sunday to Saturday instead of Mon to Sunday

    Hi Client wants to see the dates from Sunday to Saturn day instead of SAP standard Monday to Sunday. Can you please help us ? Regds Tiag