Export multicam as split screen

I have a bunch of musical performances already in multicam sequences in Premiere CC. I want to send a quad split video to another editor for reference. How can I easily export this? In other words, make a 1080p quicktime that looks exactly like the multicam monitor.
I know I could take each clip in a new timeline and apply scaling and position effects, but I'm really hoping there's an easier way because I have to do a lot of these.

Elliott B. wrote:
I know I could take each clip in a new timeline and apply scaling and position effects, but I'm really hoping there's an easier way because I have to do a lot of these.
You can always create presets to speed things up.

Similar Messages

My split screen sequence doesn't export

Can anyone tell me why when I have created a split screen, when I export it, only one half exports and the other is black?
Thanks

Have you somehow deselected one of the video tracks?

Split screen becoming unstable? (iMovie 11)

Hello. I am having a problem with a split screen movie that I don't understand. I have two film clips of me drumming that were recorded on two camcorders simultaneously. I have imported them into iMovie 11, and used the split screen function to create a movie with both camera angles showing. I have muted the audio files on the camcorder foootage, and imported an MP3 file of the drum track recorded using Logic Express. I managed to get all three of these synched together and it worked wonderfully well.
I then decided to add an additional film clip, and some titles, before the split screen movie. At first this seemed to work fine also. However, when I played the whole project back, I found that about 75% of the way through the split screen section, one of the split screen clips suddenly jumped and then seemed to repeat itself - so of course the split movie no longer was synched.
What is happening here? I noticed that as I gradually 'undid' things, I found a point where the split screen movie was 'fixed again'. It seems as if inserting a clip and audio before the split screen section is what caused the problem. Have I violated some fundemental law of making split screen movies ('Thou shalt not insert a clip in front of it?'). Visually, the inserted clip appeared to be entirely seperated from the split clip, and I could not see why it would be interfering with the split clip.
Many thanks.

I think it's a good thing you attempted to troubleshoot it, and got it working again. I'm thinking the problem is with iMovie being able to playback everything in the Preview window.
What I've seen from reading a lot of posts on this Discussion Group is iMovie can get overwhelmed with 'Effects' types of material add to the timeline. Not to say it can't handle them, but sometimes maybe certain combos really make it work harder than others. So this almost always shows up as an inability to do a live preview of the Project Timeline, but can sometimes be fixed by working backward to the point where the preview starts working again. There is no iMovie documentation or even third party books written that really lay out what is the upper limit of what you can do on the iMovie Timeline. So the only other thing to do is operate under the assumption that iMovie is working extra hard to play one of your bits of media while doing everything else on the timeline. So here's a file format, and frame dimensions best practice guideline to double-check.
1. For video, you can pre-convert clips to the Apple Intermedia Codec and the Large frame size (960x540) iMovie uses internally to playback and allow you to edit accurately down to the frame level (1/30th of a second). One conversion program often recommended for this is MPEG Streamclip which can convert to .mov formatted internally as Apple Intermediate Codec (AIC)
2. For audio, you can pre-convert sound to AIFF 16bit @ 48kHz, which is easier for iMovie to playback than a highly compress format, say like MP3 (which is adding to the workload of iMovie as it tries to do a live preview). You can convert in Logic or any other audio program you like. Side benefit to 16bit @ 48kHz is that's often the sound sample rate of the embedded audio in video shot on most consumer brand camcorders on the market. It will make it easier to match sync when sampe rates of sound clips = sample rate of video sound
3. Lastly one thing that might help workaround the limit of iMovie's Live Preview playback is to export that well synced up split screen/audio combo to a new video clip. Just go to Share Menu > Export Movie... (choose Large Size) and save it to the desktop. Re-import that finished clip, and drag it into a new Project, start adding all the clips you want in front of that clip and it won't go out of sync as it's a monolithic video clip now with the video/audio locked to one another.

SALV in Split Screen - not refreshing

I have a Report based program with Selection Screen
Upon entering valid Inputs program calls screen 100.
On Screen 100, I placed following elements
Docking Container
       Splitter Container with 2 rows with Docking container as Parent
              Placed a Toolbar object on the Top container of the split. Toolbar has 2 buttons BSID & BSAD
              If user clicks BSID, then I have to show a SALV report in Lower Split
              If user clicks BSAD, then I have to show a bit different data SALV report in same Lower Split
I tried several methods to refresh the data in SALV( I used 1 SALV)
Data is not refreshing in the second split...
I see that Lower Split container has children attribute set.. I tried to free() the lower container, but it deletes cmplete container itself, what can I do to refresh the data without completely redoing all the container stuff?
Also Children attribute in Split container is Read-only, how can I change this one ?
Valid answers would receive points...

PROGRAM yvtest3 LINE-SIZE 512.
                              CLASSES
CLASS: lcl_main DEFINITION DEFERRED,
       lcl_event DEFINITION DEFERRED.
                               TYPES
TYPES: BEGIN OF t_kna1,           " Customer Info
        kunnr TYPE kna1-kunnr,
        name1 TYPE kna1-name1,
       END OF t_kna1.
TYPES: BEGIN OF t_lfa1,           " Vendor Info
        lifnr TYPE lfa1-kunnr,
        name1 TYPE lfa1-name1,
       END OF t_lfa1.
                               OBJECTS
DATA: o_tlbar TYPE REF TO cl_gui_toolbar,
      o_split TYPE REF TO cl_gui_splitter_container,
      o_dock TYPE REF TO cl_gui_docking_container,
      o_main TYPE REF TO lcl_main,
      o_event TYPE REF TO lcl_event,
      o_top   TYPE REF TO cl_gui_container,
      o_down TYPE REF TO cl_gui_container.
                             INTERNAL TABLES
DATA: i_kna1 TYPE STANDARD TABLE OF t_kna1,
      i_lfa1 TYPE STANDARD TABLE OF t_lfa1.
                               PARAMETERS
PARAMETERS: p_dbcnt TYPE sy-dbcnt DEFAULT '500'.
      CLASS lcl_event DEFINITION
      Events Definition
CLASS lcl_event DEFINITION.
PUBLIC SECTION.
    METHODS: on_click FOR EVENT function_selected OF cl_gui_toolbar
                       IMPORTING fcode.
ENDCLASS.                    "lcl_event DEFINITION
      CLASS lcl_main DEFINITION
      Main Definition
CLASS lcl_main DEFINITION.
PUBLIC SECTION.
    METHODS: constructor.
ENDCLASS.                    "lcl_main DEFINITION
                                GET DATA
START-OF-SELECTION.
Get Customers
SELECT kunnr name1
      FROM kna1
      INTO TABLE i_kna1
      UP TO p_dbcnt ROWS.
IF sy-subrc = 0.
    SORT i_kna1 BY kunnr.
ENDIF.
Get Customers
SELECT kunnr name1
      FROM kna1
      INTO TABLE i_kna1
      UP TO p_dbcnt ROWS.
IF sy-subrc = 0.
    SORT i_lfa1 BY lifnr.
ENDIF.
IF i_kna1 IS NOT INITIAL OR i_lfa1 IS NOT INITIAL.
    CALL SCREEN '0100'.
ELSE.
    MESSAGE 'No data exists for entry criteria'(001) TYPE 'I'.
    LEAVE TO LIST-PROCESSING.
ENDIF.
      CLASS lcl_event IMPLEMENTATION
       Events Implementation
CLASS lcl_event IMPLEMENTATION.
METHOD on_click.
    CASE fcode.
      WHEN 'KNA1'.
        TRY.
            CALL METHOD cl_salv_table=>factory
              EXPORTING
                r_container = o_down
              CHANGING
                t_table     = i_kna1.
          CATCH cx_salv_msg.
            MESSAGE 'SALV - error'(007) TYPE 'I'.
            LEAVE TO LIST-PROCESSING.
        ENDTRY.
      WHEN 'LFA1'.
        TRY.
            CALL METHOD cl_salv_table=>factory
              EXPORTING
                r_container = o_down
              CHANGING
                t_table     = i_lfa1.
          CATCH cx_salv_msg.
            MESSAGE 'SALV - error'(007) TYPE 'I'.
            LEAVE TO LIST-PROCESSING.
        ENDTRY.
      WHEN 'EXIT'.
        LEAVE TO SCREEN 0.
    ENDCASE.
    cl_gui_cfw=>flush( ).
ENDMETHOD.                    "on_click
ENDCLASS.                    "lcl_event IMPLEMENTATION
      CLASS lcl_main IMPLEMENTATION
      Main Implementation
CLASS lcl_main IMPLEMENTATION.
METHOD constructor.
    DATA: lw_evnt TYPE cntl_simple_event.       " Events
    DATA: li_evnt TYPE cntl_simple_events.      " Events
Create Docking Container
    FREE o_dock.
    CREATE OBJECT o_dock
      EXPORTING
        repid                       = sy-cprog
        dynnr                       = '0100'
        side                        = 1            " dock_at_left
        extension                   = 400
        lifetime                    = 1            " Dynpro
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    IF sy-subrc <> 0.
      MESSAGE 'Error creating Docking Container'(002) TYPE 'I'.
      LEAVE LIST-PROCESSING.
    ENDIF.
Create Split Screen
    FREE: o_split,o_top,o_down.
    CREATE OBJECT o_split
      EXPORTING
        parent            = o_dock
        rows              = 2
        columns           = 1
      EXCEPTIONS
        cntl_error        = 1
        cntl_system_error = 2
        OTHERS            = 3.
    IF sy-subrc <> 0.
      MESSAGE 'Error creating Splitter Container'(003) TYPE 'I'.
      LEAVE LIST-PROCESSING.
    ENDIF.
Set Sash Invisible
    o_split->set_row_sash( id    = 1
                          type = o_split->type_sashvisible
                          value = o_split->false ).
Set Row Height of 1st Container to fit Buttons
    o_split->set_row_height( id = 1 height = 5 ).
    o_top = o_split->get_container( row = 1 column = 1 ).
    o_down = o_split->get_container( row = 2 column = 1 ).
Create Toolbar
    CREATE OBJECT o_tlbar
      EXPORTING
        parent             = o_top
        lifetime           = 1
      EXCEPTIONS
        cntl_install_error = 1
        cntl_error         = 2
        cntb_wrong_version = 3
        OTHERS             = 4.
    IF sy-subrc <> 0.
      MESSAGE 'Error creating Toolbar'(004) TYPE 'I'.
      LEAVE LIST-PROCESSING.
    ENDIF.
Add Buttons to the Toolbar
    CALL METHOD o_tlbar->add_button
      EXPORTING
        fcode            = 'KNA1'
        icon             = ' '
        butn_type        = 0
        text             = 'KNA1'
      EXCEPTIONS
        cntl_error       = 1
        cntb_btype_error = 2
        cntb_error_fcode = 3
        OTHERS           = 4.
    IF sy-subrc <> 0.
      MESSAGE 'Error creating Button on Toolbar'(005) TYPE 'I'.
      LEAVE LIST-PROCESSING.
    ENDIF.
    CALL METHOD o_tlbar->add_button
      EXPORTING
        fcode            = 'LFA1'
        icon             = ' '
        butn_type        = 0
        text             = 'LFA1'
      EXCEPTIONS
        cntl_error       = 1
        cntb_btype_error = 2
        cntb_error_fcode = 3
        OTHERS           = 4.
    IF sy-subrc <> 0.
      MESSAGE 'Error creating Button on Toolbar'(005) TYPE 'I'.
      LEAVE LIST-PROCESSING.
    ENDIF.
    CALL METHOD o_tlbar->add_button
      EXPORTING
        fcode            = 'EXIT'
        icon             = ' '
        butn_type        = 0
        text             = 'Exit'
      EXCEPTIONS
        cntl_error       = 1
        cntb_btype_error = 2
        cntb_error_fcode = 3
        OTHERS           = 4.
    IF sy-subrc <> 0.
      MESSAGE 'Error creating Button on Toolbar'(005) TYPE 'I'.
      LEAVE LIST-PROCESSING.
    ENDIF.
Add Events
register events for toolbar-control
    lw_evnt-eventid = o_tlbar->m_id_function_selected.
    APPEND lw_evnt TO li_evnt.
    o_tlbar->set_registered_events( li_evnt ).
Create Event Handler
    CREATE OBJECT o_event.
    SET HANDLER o_event->on_click FOR o_tlbar.
ENDMETHOD.                    "constructor
ENDCLASS.                    "lcl_main IMPLEMENTATION
*&      Module STATUS_0100 OUTPUT
      Screen 100 Init
MODULE status_0100 OUTPUT.
IF o_main IS NOT BOUND.
    CREATE OBJECT o_main.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT

How to show subscreen in split screen

Hi all,
Basically i want to show one tree control in left pane and all relevent subscreens in right pane.
But, I am not able to create subscreen area in right pane.
How i can create sub screen area and/or subscreens in split screen control.
Thanks,
Jogdand M B

Hi Machindra,
I also faced the same kind of problem previously. Actually there is no container which can contain normal dynpro screens / subscreens / ui elements.
However you can still implement the same kind of scenario.
As you said you want to have splitted area - left area should have tree control and right area should have subscreen.
What you can do is make use of docking container (class CL_GUI_DOCKING_CONTAINER) like -
1. Create your normal dynpro screen with a subscreen area as you wanted.
2. In a PBO module write code for creating tree control in docking container, like -
DATA: <docking container object> TYPE REF TO CL_GUI_DOCKING_CONTAINER,
      <ALV grid object>          TYPE REF TO CL_GUI_ALV_GRID.
CREATE OBJECT <docking container object>
              EXPORTING repid     = repid
                        dynnr     = dynnr
                        side      = docking->dock_at_left
                        extension = 180.
CREATE OBJECT <ALV grid object>
       EXPORTING I_PARENT = <docking container object>.
CALL METHOD <ALV grid object>->SET_TABLE_FOR_FIRST_DISPLAY
     EXPORTING I_STRUCTURE_NAME = 'SFLIGHT'
     CHANGING IT_OUTTAB        = <output table>.
Regards,
Manish Joshi
I hope you know how to award points

Quicktime Pro - Split Screen Question??

The help section says that you can edit a video to have a "split screen" - meaning that I can import a video into an existing video, and have them playing side by side (or one on top of the other). I have been able to do a picture in picture (however not playing at the same time) - but can't seem to find the correct instructions!
I am trying to show two athletes running the same 40-yard dash - comparing them either side by side, or with one video on top of the other - at the same time.
Any help will be GREATLY appreciated! (iMovie cannot do this!)
Thanks!
Kim

This is how I do it using iMovie 6:
Organize the video clips and/or stills that you want to superimpose on to your main video clip, by having these in separate, individual iMovie projects (no matter how small). It helps if these are in the exact length/time you want later.
Now start with the clip in your iMovie project on to which you want to superimpose one of more smaller video clips or stills. Lets call it Main Clip. Export this (share) to Quicktime Pro in DV (full quality). make sure it has the same aspect as before (Quicktime tends to default to 4:3. If you want 16:9, read on).
In Quicktime, with this project open, select File ~ Open File. Select the iMovie file (in your movies folder) of the first clip/still you want superimposed. This will open in its own QT window. Select Edit ~ copy. If it is a movie clip then select all ~ copy (or you will only get one frame!). Switch back to the Main Clip window, and click in the scroll bar where you want the extra clip/still to appear. Choose Edit ~ Add to Movie.
You can repeat this as many times as you like, if you want to build a 'Video Wall', i.e. have several superimposed clips/stills on the same Main Clip.
Do not worry that the new clip overlaps or covers up the Main Clip, at this stage.
Choose Window ~ Show Movie Properties. The Properties Dialogue appears.
You will see a list of video (and audio) tracks. Track one will be the Main Clip, track 2 your new added (superimposed) clip. Click track 2, then click visual settings. From the Scaled Size pop-op menu, choose percent. Then type 50 into the first box. If Preserve Aspect Ratio is turned on you won't need to type 50 into the second box. You have made the pasted footage appear at one quarter its original size. The inset is now hugging the top-left corner of the Main Clip. If you want, you can type numbers into the Offset Boxes to shove it away from that corner (there are 72 pixels to the inch).
If your original Main Clip was required in 16:9, unclick (de-select) Preserve Aspect Ratio, and type in the relevant numbers in the two boxes, in Video Track 1.
PAL (for Europe):
Standard DV (4:3) 788 x 576
DV Widescreen (16:9) 1050 x 576
NTSC (for the USA):
Standard DV (4:3) 720 x 528
DV Widescreen (16:9) 874 x 480
This will not affect video track 2, but if that is also wanted in 16:9 repeat for that track.
You can superimpose, 3, 4, or more such 'overlaps' on the same clip, and spend a happy afternoon tapping away for each track in the Offset Boxes until you have got them all in the right place! You can even overlap them, if you can remember (or note down - hire a secretary to take notes) which track you want on top etc.
Save the completed QT file. Import the completed file into a new iMovie project. Import this into the original iMovie project, substituting the old clip you copied to QT as Main Clip for the new fancy clip you have made.
Have fun!

How to do a locked split-screen between two different video tracks

I'm creating two time-lapse videos and then I'm planning to to play them side-by-side in one sequence.
The way I was planning to do this was to scoot one video track over using the "center" tool in the motion panel, and then crop it on its right-hand edge to reveal the other video track beneath.
The problem with doing this however is that, as the camera gets bumped or moved slightly as the months go on, and I then have to cut and reposition the "center" location for the clip, I have to then adjust the amount of crop on that video clip since I've moved its position. This means the center split-screen location keeps changing as I move the video around.
Is there a way where I can just lock the split screen smack in the middle of the frame as I tinker with each side of the frame (video track) independently? I tried adding a split-screen transition in the very beginning to the top track, but I can't make cuts on a transition to then adjust the motion attributes.
Any ideas on how to simplify this process would really be appreciated. Originally, I thought there was no easier way to do this, but I was so blown away by all the answers to my motion effects question today (and all the things I never knew about FCP) that I thought it wouldn't hurt to see if someone out there had one more ace up their sleeve. If not, I'll assume this is one of those things that can't be simplified anymore than what I'm doing.
Thanks again guys,
Chris

Though David's Motion Tracking suggestion would eliminate alot of later finagling, you could try something similar to Reink's, without using Photoshop.
Try this...
1. In a seperate timeline, drop a Matte/Color Solid into the new timeline (using dropdown at bottom right of Viewer window).
2. Dbl-click the color solid, click on Controls tab and set Parameters as H/0, S/0, B/100. Then click the Motion tab/Crop Right-50.
3. Click the Viewer's Video tab and go to Export/QTConversion/Still Image (png) and name it something like WhiteMatte_CropR50.
4. Import that into your project.
5. Now with your two timelapse clips on V1 and V2 with in/out points at head/tails and both tracks highlighted...'Nest' the sequence...Main Menu/Sequence/Nest Item(s).
6. Next, with the nested sequence active (single clip will look light purple)...option-double click on it and and drop an Image Mask Filter on it, then drag the WhiteMatte.png clip into the 'image well' (little box that has a question mark in it). Keep the channel on Luminance.
7. Now, if you dbl-click the nest, it will open it's host sequence, that you can do your 'Motion Tab/Centering' on, without affecting the 50% split down the middle.
May seem like alot of work, but it's not really.
K
p.s...there are probably other ways to do this as well.

Split screen causes artifacting in images - what is the solution?

After creating a four image split screen (two frames on top, two frames on the bottom), the images in each box suffer from extreme artifacting. By that I mean the images breaks down. For example, grass that in the original images is clearly and cleanly visible, suddenly becomes very "noisy" once I have added it to the split screen.
I have gone through several attempted solutions, but have all failed to solve the problem.
The degradation is most noticable when I export to a Mpeg2 and burn to a DVD, but I have eliminated the possibility that it is breaking down in the Mpeg2 conversion. Instead, it seems to be happening within Final Cut Pro.
Can anyone offer suggestions that might help?

Patrick. Thanks very much for jumping in.
For clarification, the images in the split screens are not photos. They are films. Four films in four boxes playing on the screen at the same time. Therefore, correct me if I'm wrong, your Photoshop advice doesn't work here. Also, I do not have Motion.
I took a look at the suggestion in your final paragraph. I have Final Cut Pro HD 4.5, but nevertheless went through your suggested workflow. Ctrl-clicked on the sequence - selected settings - clicked on the Video Processing tab. I don't have a sampling setting as you indicate per se, but I did try changing the only apparently appropriate setting in FCP 4.5, which was to change from Render in 8-bit YUV to Render all YUV material in High Precision YUV. This took twice as long to render the sequence, but unfortunately had no positive effect.
So, I am still in the position of having 4 great looking videos sequences, that I am trying to combine into one 4-squared split screen, but when I do so each of the four sequences deteriorates substantially.
Do you have any other suggestions? I would be grateful for your experience.
Powerbook G4, 867Mhz Mac OS X (10.4.3) 640 DRAM

Is split screen possible on iMovie HD?

I've just been fooling around with version 5.0.2 and I can't find any way to do a split screen effect. Is it possible to combine too clips together in any way other than a transition such as a wipe?

Yes, as Bengt describes. Here is how to do it in Quicktime Pro:
Organise the video clips and/or stills that you want to superimpose on to your main video clip, by having these in separate, individual iMovie projects (no matter how small). It helps if these are in the exact length/time you want later.
Now start with the clip in your iMovie project on to which you want to superimpose one of more smaller video clips or stills. Lets call it Main Clip. Export this (share) to Quicktime Pro in DV (full quality). make sure it has the same aspect as before (Quicktime tends to default to 4:3. If you want 16:9, read on).
In Quicktime, with this project open, select File ~ Open File. Select the iMovie file (in your movies folder) of the first clip/still you want superimposed. This will open in its own QT window. Select Edit ~ copy. If it is a movie clip then select all ~ copy (or you will only get one frame!). Switch back to the Main Clip window, and click in the scroll bar where you want the extra clip/still to appear. Choose Edit ~ Add to Movie.
You can repeat this as many times as you like, if you want to build a 'Video Wall', i.e. have several superimposed clips/stills on the same Main Clip.
Do not worry that the new clip overlaps or covers up the Main Clip, at this stage.
Choose Window ~ Show Movie Properties. The Properties Dialogue appears.
You will see a list of video (and audio) tracks. Track one will be the Main Clip, track 2 your new added (superimposed) clip. Click track 2, then click visual settings. From the Scaled Size pop-op menu, choose percent. Then type 50 into the first box. If Preserve Aspect Ratio is turned on you won't need to type 50 into the second box. You have made the pasted footage appear at one quarter its original size. The inset is now hugging the top-left corner of the Main Clip. If you want, you can type numbers into the Offset Boxes to shove it away from that corner (there are 72 pixels to the inch).
If your original Main Clip was required in 16:9, unclick (de-select) Preserve Aspect Ratio, and type in 1920 in the first box, and 1080 in the second, in Video Track 1. This will not affect video track 2, but if that is also wanred in 16:9 repeat for that track.
You can superimpose, 3, 4, or more such 'overlaps' on the same clip, and spend a happy afternoon tapping away for each track in the Offset Boxes until you have got them all in the right place! You can even overlap them, if you can remember (or note down - hire a secretary to take notes) which track you want on top etc.
Save the completed QT file. Import the completed file into a new iMovie project. Import this into the original iMovie project, substituting the old clip you copied to QT as Main Clip for the new fancy clip you have made.
You will probably need to experiment a bit with the above. I know, it took me two days to master it the first time. Result: in the Wedding Video I made, during the Best Man's speech, he is relating a story about his brother (the groom) breaking his surfboard in half and swearing at the Atlantic Ocean whilst hitting it with his broken surfboard. While he is saying all that a superimposed video appears of the groom doing exactly that - a video I took 14 years previously! Moreover, the wedding video is in 16:9, but the inset clip is in its original 4:3 aspect!
Cool or what!
Have fun!

Using local/testing server with cs5 inserting images look fine in the split screen but do not show

Hi
If I open example: header.php and insert any photo jpeg/.html ecs i can see the images in the split screen but not in the browser if i save then refresh. I am able to make any change to the code ecs. and they are reflected just fine. I have tried this with my fireworks images .html and when that did not work i tried a strait jpeg off the desktop. This all did not work. I have deleted the local server then step by step created a new one via devnet instruction. This did not work! everything looks fine i even tried in 3 sep browsers with 0 luck....There is no remote server connected at this time because i am making a child theme for my current site. After all changes are done we will the ftp the word press files to site and change.
Ps i even started over from scratch with 0 positive affects....

After a lot of pain!!!!!!! the issue is fixed lol After 3 weeks I have overlooked the obvious !!! so the simple fix was the path of the image. Yes i feel stupid 10 years in lol....
Apparently dreamweaver cs 5 will not use the full path when inserting images into the page example: If you drag the image out of your assets folder or however you do it, DW will give you a path like this <img src="images/glass.jpg" width="800" height="729"> This is not the full path and when your pist!!! you cant see things like that ;( so the image path should look like this:
<img src="wp-content/themes/adszoom/images/glass.jpg" width="800" height="729">
also in the html files example of bad then good!

<img name="navigation" src="navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
<map name="m_navigation">
<area shape="poly" coords="804,7,994,7,994,47,804,47,804,7" href="http://adszoom.com/699-2/" title="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" alt="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" >
<area shape="poly" coords="602,8,792,8,792,48,602,48,602,8" href="http://adszoom.com/wp-admin/edit.php/" title="VIEW OR EDIT YOUR CLASSIFIED ADS" alt="VIEW OR EDIT YOUR CLASSIFIED ADS" >
<area shape="poly" coords="405,8,595,8,595,48,405,48,405,8" href="http://adszoom.com/post-an-ad/" title="NEW CLASSIFIED AD POST" alt="NEW CLASSIFIED AD POST" >
<area shape="poly" coords="206,8,396,8,396,48,206,48,206,8" href="http://adszoom.com/help/" title="HELP WITH YOUR CLASSIFIED ADS" alt="HELP WITH YOUR CLASSIFIED ADS" >
<area shape="poly" coords="3,9,193,9,193,49,3,49,3,9" href="http://adszoom.com/" title="HOME VIEW CLASSIFIED ADS" alt="HOME VIEW CLASSIFIED ADS" >
</map>

</body>
NOW THE GOOD!

<img name="navigation" src="wp-content/themes/adszoom/images/navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
<map name="m_navigation">
<area shape="poly" coords="804,7,994,7,994,47,804,47,804,7" href="http://adszoom.com/699-2/" title="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" alt="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" >
<area shape="poly" coords="602,8,792,8,792,48,602,48,602,8" href="http://adszoom.com/wp-admin/edit.php/" title="VIEW OR EDIT YOUR CLASSIFIED ADS" alt="VIEW OR EDIT YOUR CLASSIFIED ADS" >
<area shape="poly" coords="405,8,595,8,595,48,405,48,405,8" href="http://adszoom.com/post-an-ad/" title="NEW CLASSIFIED AD POST" alt="NEW CLASSIFIED AD POST" >
<area shape="poly" coords="206,8,396,8,396,48,206,48,206,8" href="http://adszoom.com/help/" title="HELP WITH YOUR CLASSIFIED ADS" alt="HELP WITH YOUR CLASSIFIED ADS" >
<area shape="poly" coords="3,9,193,9,193,49,3,49,3,9" href="http://adszoom.com/" title="HOME VIEW CLASSIFIED ADS" alt="HOME VIEW CLASSIFIED ADS" >
</map>

</body>
THIS LINE IS YOUR ISSUE
<img name="navigation" src="wp-content/themes/adszoom/images/navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
Ok thanks and if there are any issues with dw please ask: [email protected]

When using firefox and each time I open a new tab I end up with a split screen and it is annoying. How so I fix it.

I open firefox. Go to website then where there is a + sign I open a new tab. A new tab comes up but then splits the screen into two with a new tab in the middle and I end up with 3 small split screens in the one instead of 3 separate tabs.because it is doing that i cannot then get a full screen and go about my usual business. Lately there seems to be numerous problems with fire fox loading also. it continues to come up with page not found and try again. I hit try again and then it may find the page. these are on sites that I access daily and have done so for several years now. Never before have I had so much trouble with fire fox. Not only I but we have four computers accessing the internet ...have done for some time and never had this problem but everyone is suddenly experiencing the same problem. The only thing new that has been put on the main computer is a K9 protection thing recently and I am wondering could that have anything to do with these issues and if not is fire fox having tech issues . How can these problems??

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How do I do a split screen to show the contents of my Library and a playlist at the same time?

I’m using iTunes 11.3.1 on a current generation Mac running OSX 10.9.4.
I like to manually create playlists. I want to be able to see the contents of a playlist and my library at the same time. Is there a way to do a split screen view in iTunes so the songs in my playlist show in one window and the library shows in another?

See this thread -> https://discussions.apple.com/thread/5666364

CS4-How do I remove a split screen in the Program monitor window?

I have Pro CS4 on a vista 64 OS. I am using the Mainstream encoders and my Program monitor window switches to a split screen every time I play the timeline. When I stop the playback, the screen returns to normal full screen with the last frame showing. When I start the playback again, the screen splits into two screens squishing the actual playback window to the left part of the monitor window. Any Ideas? Thanks.

I found the solution by changing my quality settings (in the top right hand corner of the program display window) from "Automatic Quality" to "Highest Quality".
I am not sure why it affects the display in this manner, but it just works this way and it is repeatable.
I am working with 50 Mb MXF files from a Sony PDW900 HD camera.I use the Mainstream codecs to inport the files. I am using a Nvidia Quadro CX as a video card with the latest drivers. I first thought that the Mainstream codecs were affecting the display somehow, but then again, I do not remember changing these display settings. Thanks for the suggestions, I appreciate the response just the same...

My Built-in Webcam has my image in a horizontal split screen!

My Built-in Webcam has my image in a horizontal split screen. How can I fix this???

Let me explain more - when I use skype for example, my image is displayed in a horizontal split screen. I have tried another chat product and the same thing happens - so it must be something to do with the built in camera or configuration of the camera. Would it be best to contact Apple about this? Will somebody have to get a spanner out to fix my quite new macbook pro? (3 months old). I teach languages online so I really depend on a decent image. Can anybody help me?

How can I return to a split screen set-up?

While I was away on business, a co-worker shared my computer and somehow changed the appearance of my inbox to a full screen. I want to return to the split screen which allows me to see my e-mails and read the highlighted one in the split screen format I had originally.

Please keep your discussion in this thread. Do not PM me. Other people might benefit from the discussion.
You say that pressing F8 does not turn on the Message Pane? You are in the main window with your Inbox showing right?
From the Menu Bar select View-Layout. is Message Pane checked?
No Menu Bar? Press the alt key.
If it is checked and still no message pane showing, maybe it got dragged off the bottom of the screen. Move your mouse down toward the bottom margin of the screen and watch for it to change to a double headed arrow. When it does click and drag up to see if you can pull up the message pane.

Export multicam as split screen

Similar Messages

Maybe you are looking for