Export Notes Script Issue for InCopy

Hello,
I have a script for InCopy that is suppose to look for every note in an InCopy document and export it to a text file. It doesn't find notes that are in inline text frames, grouped text frames, or notes that are in anchored objects. I have attached the script and a sample InCopy document. Could anyone help me modify it so it can find every note?
Thanks,
Rob

robert_underwood wrote:
I have a script for InCopy that is suppose to look for every note in an InCopy document and export it to a text file. It doesn't find notes that are in inline text frames, grouped text frames, or notes that are in anchored objects. I have attached the script and a sample InCopy document. Could anyone help me modify it so it can find every note?
Because InLined/Anchored TFs or Grouped TFs etc. aren't on page - the Parent for it is Character in another TextFrame or Group - not Page.
So you need to convert your code to go through all InLined/Anchored TextFrames in TextFrames and in Groups.
robin
www.adobescripts.com

Similar Messages

EXIT BUTTON - PAGE NOT FOUND issue for Address

After customization of home page, we are getting page not found error for the Exit button in Address and in some other applications, it is opening a new window and in some other applications, the screen is getting struck and the backend user id is getting locked.
Could some one suggest me ? I feel we make the exit button invisible so that end user will not click on that totally. Is this a good idea?

You can of course hide the exit buttin via personalisation
read the sap note 951257 for the issue you are having
The solution is to go and make the necessary entries.
       -   Go to V_T7XSSSERARBC view.
       -   Select the Area for which the exit button is not working.
       -   Enter 'Area Link Type' if not entered already.
       -   Enter 'Link Resource' if not entered already.
       -   Save the changes made.
With regard to the WorkProtect Mode, Ifollow the note #734861 -
"WorkProtect Mode - Global Settings".
also check the steps here
While creating an iView instance there are two option
-paste
-paste as delta link
You should choose paste as delta link option.
Please check the link for more information-
http://help.sap.com/saphelp_NW04s/helpdata/en/f5/eb515d0e6a11d7b84900047
582c9f7/frameset.htm
We checked the attachments, it seems that when you run the application
from preview mode you will not see 'exit' button. If you run the
application directly you will not see 'exit'button.
'Exit' button feature comes into picture when you consider that
application should use home page customizing feature.

Output could not be issued for billing doc no

Hi All,
I am getting printpreview correctly, but when i am taking print it is saying output couldnot be issued.
In Devlopment it is working fine. in qulaity i am getting this error.
I am getting below error message.
An error occurred while output was being issued. It is possible, for example, that the form to be issued has not been activated or has an error. An error may also have arisen while the data to be issued was being edited.
Thanks in advance.

Hi,
I guess, may be the problem is due to your Authorizations Problem in Quality system.
after giving print, just check transaction SU53 for Authorization, if it shows something in red it mean U dont have authorizations..
Hope it helps!!
Rgds,
Pavan

Script Issue for Windows 2012 R2 or 2012 Operating Systems

I have this login script that works on older operating systems but fails to run under Window 2012 R2 for users when the login; its setup as a active directory domain user logon policy: Im not much with scripts ..any help you could provide would be great
Option Explicit
Dim objFSO, objFolder, strDirectory, WshS, WSHSell, strDriveLetter, intRunError, objShell, strUser
Dim objNetwork, usrProfile, strProfilepath, usrName
Set WshS = WScript.CreateObject("WScript.Shell")
'Expand Environment
'Create const's to spare time and place
usrProfile = WshS.ExpandEnvironmentStrings("%UserProfile%")
usrName = WshS.ExpandEnvironmentStrings("%UserName%")
' Message to prove my string contains the path to my profile
strProfilepath = usrProfile
' CREATE FOLDERS ON USER SHARE IF IT DOES NOT EXIST AND ASSIGN RIGHTS
strDirectory = "\\hadfs1.pmhadley.com\users\" & usrName
' Create folder in share.
Set objFSO = CreateObject("Scripting.FileSystemObject")
If Not objFSO.FolderExists(strDirectory) Then
Set objFolder = objFSO.CreateFolder(strDirectory)
' Grant permissions to user in the folder.
Set objShell = CreateObject("Wscript.Shell")
intRunError = objShell.Run("%COMSPEC% /c Echo Y| cacls " & strDirectory & " /t /c /g " & usrName & ":C ""Domain Admins"":F", 2, True)
strDriveLetter = "U:"
Set objNetwork = CreateObject("WScript.Network")
objNetwork.MapNetworkDrive strDriveLetter, strDirectory
ELSE IF objFSO.FolderExists(strDirectory) Then
strDriveLetter = "U:"
Set objNetwork = CreateObject("WScript.Network")
objNetwork.MapNetworkDrive strDriveLetter, strDirectory
END IF
END IF
It works if I run the script on the server from command prompt; but Remote Desktop sessions dont show the mapping created

Hi,
Get rid of the script and set up your user's home folder like so:
https://support.microsoft.com/en-us/kb/320043/
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

Firefox crashes when sending e-mail from hotmail. This is not an issue for safari. Help!

Firefox keeps crashing when I try to create a new e-mail in hotmail or forward an e-mail. It is a browser issue, because when I try to do the same thing in safari, I don't have any trouble.

I did. When I type in about crashes in the address bar I get this:
Submitted Crash Reports
No crash reports have been submitted.
How can I search for a crash signature when I don't get one? Is there something I can do to make sure that I do get one.

Error : Output could not be issued

Dear Expert,
I am not able to take print out of one of my invoice. While looking for print preview i am getting error message as below :
Output could not be issued
Message no. VF 304
Diagnosis
An error occurred while output was being issued. It is possible, for example, that the form to be issued has not been activated or has an error. An error may also have arisen while the data to be issued was being edited.
I did some changes in smartform but all is activated and other invoices are showing proper output except one.
can you please tell me possible causes to trace this error.
Thanks.

Hello,
Please check the OSS : Note 451568 - Document printing:Message VF304 - Output could not be issued for more informtaion.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=451568
The OSS will be helpful.
BR,
Tushar

Delivery note smartform - Output could not be issued

Hi All,
output could not be issued for delivery note smartform.
Here is what I get when I try to print:
Output could not be issued
Message no. VL 086
There is only one Partner (ship to party) and it has record in NAST for the output type I use.
Delivery type is ZLCC (no sold to party)
If I try to make print preview - nothing happens at all, even no message...
It works fine in dev system, but not in quality system.
Any ideas?
Regards,
Mindaugas

Hi,
Check If the output type is assigned to the document in quality"
Use transaction NACE
Choose application V2 Shipping and press Output type button.
Check first in your development system, and then in the quality system
Regards
Åsa Thenstedt

Output could not be issued - VT03n

Hi,
There is an issue with a few shipping documents when trying to print : Transaction VT03n
When you choose 'Shipment --> Issue output to --> Screen, message number VW086 appears:
"Output could not be issued"
For output type ZDG1.
Can any one suggest what could be the reason for this message as it is not happening for all documents except a few.
Thanks & Regards,
MK
Edited by: MK18774 on Sep 3, 2009 6:06 PM

i mean, like Condition records, sequences etc. But, i guess, they are fine.
Some times the reason could be: If the text is over flowing than window size or word wrapping or window size is bigger than the specified page size, over lapping text contained windows, wrong alignment etc..........so, reduce the content of the text in each window, then try. Also pls. wait for replies from other experts, before re-sizing the windows
thanq
Edited by: SAP ABAPer on Sep 3, 2009 6:26 PM

SMS-Not iMessage- issues in iOS7

When I send a text message, non-iPhone users receive it multiple times. Not an issue for me, but my friends are complaining that they get the same message 6 times. I have an iPhone 5c and it's fully updated (7.0.3). Is anyone else experiencing this issue/ have any solutions? I've already reset my settings and restarted the phone to no avail.

SMS is a carrier feature. Contact your carrier.

HSDIO conditionally fetch hardware compare sample errors (script trigger to flag whether or not to wait for software trigger)

I am moderately new to Labview and definitely new to the HSDIO platform, so my apologies if this is either impossible or silly!
I am working on a system that consists of multiple PXI-6548 modules that are synchronized using T-CLK and I am using hardware compare. The issue I have is that I need to be able to capture ALL the failing sample error locations from the hardware compare fetch VI... By ALL I mean potentially many, many more fails than the 4094 sample error depth present on the modules.
My strategy has been to break up a large waveform into several subsets that are no larger than 4094 samples (to guarantee that I can't overflow the error FIFO) and then fetch the errors for each block. After the fetch is complete I send a software reference trigger that is subsequently exported to a scriptTrigger that tells the hardware it is OK to proceed (I do this because my fetch routine is in a while loop and Labview says that the "repeated capbility has not yet been defined" if I try to use a software script trigger in a loop).
This works fine, but it is also conceivable that I could have 0 errors in 4094 samples. In such a case what I would like to do is to skip the fetching of the hardware compare errors (since there aren't any) and immediately begin the generation of the next block of the waveform. That is, skip the time where I have to wait for a software trigger.
I tried to do this by exporting the sample error event to a PFI and looping that PFI back in to generate a script trigger. What I thought would happen was that the script trigger would get asserted (and stay asserted) if there was ever a sample error in a block, then I could clear the script trigger in my script. However, in debug I ended up exporting this script trigger back out again and saw that it was only lasting for a few hundred nanoseconds (in a case where there was only 1 injected sample error)... The sample error event shows up as a 1-sample wide pulse.
So, my question is this: is there a way to set a flag to indicate that at least one sample error occurred in a given block that will persist until I clear it in my script? What I want to do is below...
generate wfmA subset (0, 4094)
if scriptTrigger1
clear scriptTrigger1
wait until scriptTrigger0
end
clear scriptTrigger0
generate wfmA subset (4094, 4094)
I want scriptTrigger1 to be asserted only if there was a sample error in any block of 4094 and it needs to stay asserted until it is cleared in the script. scriptTrigger0 is the software trigger that will be sent only if a fetch is performed. Again, the goal being that if there were no sample errors in a block, the waiting for scriptTrigger0 will not occur.
I am probably going about it all wrong (obviously since it doesn't work), so any help would be much appreciated!

Please disregard most of my previous post... after some more debug work today I have been able to achieve the desired effect at slower frequencies. I did straighten out my script too:
generate wfmA
if scriptTrigger1
clear scriptTrigger0
wait until scriptTrigger0
end if
generate wfmA
scriptTrigger1 = sample error event flag
scriptTrigger0 = software trigger (finished fetching error backlog in SW)
However, I am still having a related issue.
I am exporting the Sample Error Event to a PFI line, looping that back in on another PFI line, and having the incoming version of the Sample Error Event generate a script trigger. My stimulus has a single injected sample error for debug. For additional debug I am exporting the script trigger to yet another PFI; I have the sample error event PFI and the script trigger PFI hooked up to a scope.
If I run the sample clock rate less than ~133MHz everything works... I can see the sample error event pulse high for one clock period and the script trigger stays around until it is consumed by my script's if statement.
Once I go faster than that I am seeing that the script trigger catches the sample error event occasionally. The faster I go, the less often it is caught. If I widen out the error to be 2 samples wide then it will work every time even at 200MHz.
I have tried PFI0-3 and the PXI lines as the output terminal for the sample error event and they all have the same result (this implies the load from the scope isn't the cause).
I don't know what else to try? I can't over sample my waveform because I need to run a true 200MHz. I don't see anything that would give me any other control over the sample error event in terms of its pulsewidth or how to export it directly to a script trigger instead of how I'm doing it.
Any other ideas?

SQLloder scripts not getting generated for CLOBs

I am trying to migrate MYSQL 3.23 database into Oracle 8.1.7 and after creating the Oracle model and after converting the MYSQL text datatype into CLOB of the Oracle model the SQLloader scripts is not getting generated for CLOB datatypes. I mean the scripts are getting created but there is no change in the script for CLOB datatype.
The script generates the following for the table containing CLOB datatypes:
mysqldump -h <HOST> -u <USERNAME> -p<PASSWORD> -T <DESTINATION_PATH> fields-terminated-by="<ec>" lines-terminated-by="<er>" test av_wbt_course
Please let me know how to load data when the datatype is of CLOB ?

I was able to resolve this issue by using OWM Oracle Migration instead of using offline method by sqlloader scripts.

Firefox is having "Script" issues (Not Responding) und possibly Flash issues?

Okay, downloaded Firefox for the first time in like a year yesterday. It was working beautifully, oh, how I've missed it. I hate using Google Chrome with a fiery burning passion.
However, though it was working perfectly yesterday, I have not downloaded anything or got any plug-ins/extensions, whatever.
Today, however, I can go to www.google.com (on firefox), but if I try to go to my banks website, or imvu.com, or something like that, all the sudden Firefox decides to hang. It freezes und I get that annoying "(Not Responding)" at the top. I have to close out of the browser entirely, open it up und forgo the session restore.
Some websites are okay, however, it seems many of them aren't.
I get a script error message, so far the one for imvu.com that popped up was "lookout.bluecava" or something like that. Asked if I wanted to wait for script to respond or if I wanted to stop it. Either way, it ends with me closing out und starting back at google.
Right now, to ask this question, I had to re-download google chrome, und log in from that browser since Firefox doesn't even want to support it's own support forum! Crazy stuff, right?
Anyway, since it's having a "script" issue, I went to java, made sure I had the updated java installed on my computer, then I made sure that I had the updated java plug-in. Und I even downloaded the 64bit java for it as well, both the 7u45 or whatever.
So, my java on my comp und firefox browser are seemingly up to date, und the Add-On thing for Firefox to check if plugins are up to date says they all of them are up to date.
Still having the issue. The moment I go to imvu or another site that has that issue, it freezes within 10 seconds und that's all she wrote.
So, I'm really not wanting to go back to Google Chrome for another year, I miss the hell out of Firefox.
To Add: The issue I am having right now with Firefox is the same issue I had a year ago, when I had to uninstall firefox und go with Chrome in the first place.
But, since it was acting normal yesterday when I installed it, I figured that it was fixed. Wrong in less than 24 hours.
Before I submitted this, I decided to hop back onto Firefox und try something.
I disabled the Shockwave Flash und the Shockwave Director plugins. Now, Firefox is working again.
Sooooooooooooooooooooooooooooooooo.
It asks me if I want to install the "flash" plugins needed to view some content on the page (I used imvu.com to try it out after disabling the shockwave), but still runs.
So, what do I need to do for flash? Or better yet, what's going on with it?
I downloaded the flash yesterday within half an hour of starting Firefox up after downloading it. Und it worked just fine for hours.
I shut the comp down, packed it up, went home, come back to work, hop on the net und BAM. All the sudden Shockwave is having issues with Firefox when nothing was done to instigate it? Doesn't make sense.
Other info:
Windows 7 Home Premium on HP laptop.

I will give Firefox 24.1 a try und see if shockwave flash actually works without making it hang und resulting in need of force close.

Urgent: Error in script output "output could not be issued"

Hi Experts,
I am using transaction VL02N and issuing output then it is giving error "output could not be issued" in development server.when I productionize it in production it is giving the proper output when no of line item is upto two if it exceeds it again give error message "output could not be issued"
Plz give help.
Thanks,
Tanisha

Hi,
s i agree that there are some data available in devpt server as well...
I'm listing u all the possibilities of error ... please make sure that ur doc satisfies these things
1.check whther the entries are there for the corresponding billing doc no...
2.Now suppose if you want to some data to be displayed in one
page and the rest of the data in another page i.e you want to force the data
to move to next page then use this sap script command
/: NEW-PAGE[page_name]
This will force the data to move to the next page.
3.assuming that u r using two pages(FIRST,NEXT) in the layout...
the statement that displays the line item should probably be inside the loop and corrosponding form and end form.. so that if it exceeds the page it'll automatically display it in the next page..
4.Try to expand the main window size so that continous line item
5.Make sure that u have alloted the corresponding output type for the billing document issued...
6.check the form name and the driver program name)in NACE transaction
Hope this helps you
<b><REMOVED BY MODERATOR></b>
Jgds
Message was edited by:
Alvaro Tejada Galindo

Not able to Export sap script with RSTXSCRP in different languages IT,ES

Hi all,
I am trying to export sap script to local file using this program RSTXSCRP, but it's working fine for English but not other languages like IT,ES and DA. Even if i specify parameter in selection screen Language vector as IT. It's not exporting code from sap script for IT language. By default it's exporting only EN.
Can you please tell me what I have to do to export sap script from different language.
Thank you.

Hi!
For Translating you can do it by
Going in transaction SE63 -> Translation -> Abap objects -> Other Long Texts -> FS Forms and Styles.
There you have to enter client and form name source lang. and target lang.
Then you export it with the program RSTXSCRP in the language u have translated....
As you have form created in English and you can download and upload it in only English .
Regards.

Exporting not following script commands

I am trying to export a project as a quicktime movie however
it apperas that the "wait for flash"
quote:
-- WAIT UNTIL ANIMATION DONE
on exitFrame
if the playing of sprite 1 = TRUE then
go to the frame
else
go to the frame + 1
end if
end
and "wait for sound"
quote:
-- LOOP the frame until snd channel 2 is finished
on exitFrame
if sound(2).isBusy() = TRUE then
go to the frame
else
go to the frame + 1
end if
end
commands in my script are complety ignored when the project
is exported both as a MOV and as frames. Is there a way around
this? I'm new to Director MX2004 and I am trying to recover some
content that was lost in a video - the only place the content
exists in in the Director files... Using it on a Mac - OS X

As you've noted, all scripts are ignored when using the
built-in export
options.
You can grab every frame to an image and process these into a
video file
when done, or if there are individual assets you want most of
these are
obtainable individually (though not scripts if the file is
"compiled")

Export Notes Script Issue for InCopy

Similar Messages

Maybe you are looking for