Export song list with Japanese, Chinese and some Korean characters

I had tried to export my list of songs (which consist mainly of Japanese songs, some Chinese songs and a few Korean) using .xml but it seems like everytime I try to open it using Firefox or IE, both browsers will freeze and hang. I tried exporting as .txt, but non-English character will appear as question marks.
May I know if there is any other better way for me to export my song lists?

May I know if there is any other better way for me to
export my song lists?
Do you not also have the choice Unicode Text in Format when you do Export?

Similar Messages

  • Troubles Exporting Song List

    Here's my situation, I want to export my song list and I have songs with Chinese words in them. I could do it before, it appeared as if iTunes saved the .txt files in Unicode, but now I can't get it to work. All that shows up are question marks where the chinese words are, which means iTunes has reverted to saving in ANSI. Does anyone know how to fix this or have a work around so I can see the song list with the chinese words? Thank you very much to anyone who helps out!

    I upgraded iTunes from 6.0.2.23 to 6.0.4.2 and the Unicode option disappeared. I am not sure if that is the cause though. I have successively tried going back to 6.0.2.23, 6.0.1.3, 6.0.0.18, and 5.0.1.x, in that order, without success. I can still view old Unicode exported song list in Notepad, so the XP OS seems ok, I just can't make new Unicode export list. Do Apple engineers read these forums? Can a kind engineer please help?
      Windows XP   MediaCenter

  • Library icon changed to an "Export songs list" list named "live" ?

    I was converting a playlist named "LIVE" to MP3 and afterwards I found my Library was replaced by a export song list with a new icon named "live". This new folder still contains all the songs that were in my original "Library".
    What happended to Library in the source list and can it be corrected?
    Dell 8200   Windows XP Pro  
    Dell 8200   Windows XP Pro  
    Dell 8200   Windows XP Pro  
    Dell 8200   Windows XP Pro  

    First off, you say you purchased a 5th gen. iPod. Since the latest version is the clip-on 6th gen., I wonder if that's what you mean, or did you get a used (or old, but never used) 5th gen.? You might also check the OS requirements for the iPod you have, and see if the version of iTunes is compatible with your OS. I had to upgrade my OS to go from my old Classic 160 to a new Nano 6th gen.
    As you have guessed, the exclamation mark means that even though you have a particular song in your iTunes library, the file that it points to is no longer where iTunes thinks it should be. This may be because iTunes is confused (in which case you would resolve the confusion), or it's gone (in which case you need to get a new copy, or remove the song from iTunes if you don't want to keep it). I'm not a Windows guy, and I'm not at my home computer where I can try this out, but if I remember correctly, you can have iTunes gather all the music files on your computer and move them (or copy them) to the place where iTunes expects them to be. On a Mac, that's HD>Users>My User Name>Music>iTunes>iTunes Music. If you don't want to let iTunes do that, you can move all the music files you find to that folder yourself.
    Once all the music is there, you can delete the songs from iTunes and import them again (directing iTunes to the folder you just gathered. Make sure you are signed into your iTunes account (in the Store pull-down window—not the Store tab on the left). Songs from the iTunes store can be downloaded again (if you don't have them anymore), provided you are signed in. If a store purchase is on one of your iPods, but not in iTunes, iTunes can detect and download those again, but the limit for devices is 5, so don't waste them if you don't need to.
    More detailed info can be found in the manuals (download here).

  • I purchased a song and it shows up in the song list with an exclamation point on the sie of it.  It says the song could not be found.  I have done a search and can't find it but iTunes won't let me download or buy it again.  Help!!

    I purchased a song on iTunes and it shows up in the song list with an exclamation point on the side of it.  It says the song could not be found.  I have done a search and can't find it but iTunes won't let me download or buy it again.  Help!!

    Hello levon10
    Just delete the song and then go through the process of downloading the purchase again.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Me and my dad share an iTunes account and all of his music he has purchased on ITunes shows up on my songs list with a cloud icon next to it. How do I get rid of these from my songs list? Cuz it's doing the same thing on my iPhone

    Me and my dad share an iTunes account and all of his music he has purchased on ITunes shows up on my songs list with a cloud icon next to it. How do I get rid of these from my songs list? Cuz it's doing the same thing on my iPhone.

    Go to Edit > Preferences > Store, and uncheck the box for "Show iTunes in the Cloud purchases."

  • Help export the graphic with transparent background and not braking the quality

    hi I'd like some help please if its possible.
    I've created a monitor graphic in Fireworks that looks like iMac and I would like to export it with transparent background.
    the jpeg format looks great with no damage to the graphic at all but I can't have transparent background, although I changed the canvas fill to none. the png-8 format can apply transparent background, but damages the graphic.
    Here are the previews
    1st - the png-8 format
    2nd - thejpeg format
    A ny ideas on how I can export the graphic with transparent background and not braking the quality??

    Fireworks questions are best answered at this link:
    <http://forums.adobe.com/community/fireworks/fireworks_general>
    Good luck.

  • TextItem.content with Japanese / Chinese letters

    Hi,
    I am coding a script which combines an image with text - now my problem is that it has to work in different languages (e. g. with Japanese / Chinese kanji) and Photoshop CS3 does only return squares. If I copy&paste the wished text manually to a text block in Photoshop (I mean doing the script's work completely by hand) it will work fine; but it seems Photoshop can't identify the text I put in via script. Does anyone know how to solve this problem? I use 'Arial Unicode MS' as font and the javascript file's format is UTF-8. I would be very thankful if someone can help me.
    Best regards, blubber

    [email protected] wrote:
    > The application object doesn't have to be used with javascript - I don't know what it is like in the other scripting languages, but it doesn't matter if you write e.g. app.documents(); or documents.add();.
    It's good practice to always include the app prefix when accessing app methods
    and properties. app properties like 'name' being effectively global have caused
    me more problems than I care to mention. When I look at my code and see a 'name'
    symbol, I know that it is a local variable and not the global app property.
    The only app methods that I actually use as globals are executeAction and
    executeActionGet.
    In PS7, there was no app object, but you could get around this by doing
    app = this;
    as the first line in your script. This would help make your script portable
    between PS7 and later revs.
    -X

  • How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF.  But if I do a copy and p

    How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF.  But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.

    Use the Pencil Tool
    alex
    adrian stock wrote:
    > How to copy and paste a single pixel
    >
    > I want to copy a single pixel and then paste it in the
    position of
    > another pixel in the same image.
    >
    > (This is in effect changing the colour of the target
    pixel, isn't it.
    > But in my case copying an existing pixel seems simpler
    than selecting a
    > colour from the swatch or using the colour picker.)
    >
    > What is the most efficient way of doing this?
    >
    > I tried to select one pixel with the marquee tool. Then
    copied it with
    > control-C, but then how do I select the target pixel and
    paste with
    > control-V?
    >
    > Thanks for your help.
    >
    > Adrian
    >

  • How do I create an unordered list with three items and link to id's

    How do I create an ordered list with three items and linl to id's on my page

    Thanks, I guess what I was really asking, Is there a n option in the insert menu or somewhere where Dreamweaver does it for you.
    I am not clear on what you are wanting DW to do for you?  Is it that you want it to insert a three item unordered list?  No - there's no such function.  You would need to click in Design view where you want the list to go, click on the bulleted list icon on the Property inspector, and then enter the three items separated by carriage returns.  Then you'd have to link each item specifically.
    To enter the named anchors to element ID values, CS5 has no way to do this.  You'd have to enter those links manually.

  • Attendee List with Personnel area and position

    Hi
    Is there any report which gives the attendee list with personnel area and position. Tried to get it through adhoc query with set operationss. But the booked date is missing. 
    Thanks
    Sreeja

    You can change what is displayed using the layout once you have run the report.  This is from the report documentation:
    "You select the data you want displayed under Change layout.
    When you choose this function, a dialog box appears with the columns that are displayed on the list screen in the left table, and the hidden columns in the right table.
    The arrows let you determine what columns are displayed. To transfer the changed layout, choose Transfer.
    To save the layout, choose Save layout. You can call this layout as required by choosing Choose layout."
    We don't actually maintain attendees in our system, so I can't run the report.  But hopefully if you change the layout you can get the additional fields that you want.
    - April

  • Regarding list with material no and material class per product

    Hi All,
    Could you please tell me ,Is it possible to create a list with material no. and which material class is linked to each product?
    E.g.  7510555 (plant DK10 - sales org. DK01) Class type Z01 - ESTORE and SATTSTORE + class type 001 - CHEMICAL PRODUCT and DK_FD_SALG.
    Can you inform me in which table I can find the information.
    thanks in advanse!
    With regards,
    Pritee.

    Try transaction CL30N, CL31, CT10, CT12.
    Best Regards, Dirk

  • Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

    Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
    Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

    Lindsay,
    Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
    Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
    It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
    I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
    Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

  • I want to export my photos with the title and info attached

    I want to export my photos with the title and info attached but cannot seem to do it with this new os.

    Are you confusing Titles and Filenames by any chance?
    When you email you're sending a file. The email client sees the Filename. The title is in the Exif metadata of the file and the email app doesn't see this - neither will the Finder or filebrowser.
    You can export (as above) and opt to use the Title as Filename - it's there at the Filename section.
    Regards
    TD

  • Create String with Both Chinese and Latin alphabet

    Good day everyone!
    when I use "new String(byte[],"GBK")", if byte[] contains only Chinese or Latin alphabat, it works good.
    But If Both Chinese and Latin alphabat are in the byte[], it does't work correctly, just returning a null String?
    How can I do? Thanks for your help.

    Are you positive you are using the correct encoding?
    i.e., is gbk correct or might it be gb2312?I am sure, gbk work right for pure Chinese, but fails with bytes with both Chinese and Latin alphabet.

  • My MacBook not responding with all browsers and some applications!!!

    Hi !!!
    First sorry my english...
    My apple not respond i i need force to quiet... (Safari, firefox, chrome, some applications like players)
    I a few days my mac don't works like before i try to use chrome safari fireworks and is always the same in youtube or any website with flash content, and some applications too the same problem not respond, i was unistall and reinstall a lot o softwares i use clean app to remove the app complete and reinstall but don't works ... What i do? whatis this? My mac is all updated i use all lastest versions ... I don't understand why... Somebody can help me...
    Thank you for all news...
    bye!

    Hi,
    Click once on the hard drive icon. Then hold down the  key and tap i (  + i ).
    Capacity XX
    Available XX
    Used XX
    Post back with your values of XX.
    Regards.
    Ian.

Maybe you are looking for