Export Terminated Unsuccessfully

Dear Experts
When I rune export utility on my oracle 9i database it ends with the following errors.
EXP-00008: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
EXP-00008: ORACLE error 1041 encountered
ORA-01041: internal error. hostdef extension doesn't exist
EXP-00000: Export terminated unsuccessfully
Please help me out. thanks

You seem to be in hurry, If you need solution, you should try to provide information to the people who are trying to help you. I asked following which you did not reply
Is it windows? If yes then can you remove parameter SQLNET.AUTHENTICATION_SERVICES from your SQLNET.ORA
Are you connecting as SYSDBA for full database export? Can you do followin.
1) What is you export a schema using sysdba user
2) What is you try exporting full database using user SYSTEM.

Similar Messages

EXP-00002: error in writing to export file EXP-00002:   EXP-00000: Export terminated unsuccessfully

Dear All,
<code>
. . exporting table
CDM_HIST_INFO_SERV_RES_DEF
0 rows exported
. . exporting table
CDM_HIST_INFO_SLA
0 rows exported
. . exporting table
CDM_HIST_INFO_WORKGROUP
0 rows exported
. . exporting table
CDM_INCIDENT2SERVICES
1040 rows exported
. . exporting table
CDM_INCIDENTS </code>
EXP-00002: error in writing to export file
EXP-00002: error in writing to export fileerror closing export file /archive/weeklybkp/export/loc2/sd-04-Sep-08-55.dmp
EXP-00000: Export terminated unsuccessfully
I got the above error.It only backup 2Gb after that the above error came.Please help me.
Regards,
DB.

following link can help you out.
http://arjudba.blogspot.in/2009/12/export-fails-with-exp-00002-error-in.html
Check the solution section.

EXP-00000: Export terminated unsuccessfully

When Im perform export it terminated unsuccessfully with bellow message,please clarify why is this
EXP-00008: ORACLE error 1555 encountered
ORA-01555: snapshot too old: rollback segment number 3 with name "_SYSSMU3$" too small
EXP-00000: Export terminated unsuccessfully

I'm going to assume you are running an older version of Oracle? 9i? And/or that you use manual rollback segments?
I've had that error before when running an export because my export was running for longer than the database was keeping the undo blocks that I needed to read from. Our export was running for 6 hours, so you need to ensure that it can have a read consistent view of the data as of 6 hours ago. If using automatic undo management, which I would recommend, you can set the undo_retention to 6 hours.

Import terminated unsuccessfully with error message imp-00013

I am trying to import dump file of one table in another database.
import is terminating unsuccessfully with error message imp-00013.
(only a dba can import a file exported by another dba)
None of the user has sysdba role.

Wheather this is a valid solution?Immagine somebody who knows the account password finds a dump from an old release of your database. If he has IMP_FULL_DATABASE privilege, he can do whatever he wants, compromising data "safety".
Is this valid? Well... IMHO, I don't think so. At least, now the import is done, revoke the privilege.
Regards,
Yoann.

Import terminated unsuccessfully

OS : LINUX
oracle : 10.1.0.5.0
import
command issued : imp osdba/orasys07 file=toltmt.dmp ignore=y buffer=2000000 log= toltmt.log fromuser=(archive1, cognos1, general2, extranet1 ,inventory1, order1 ,pbe1, rtds1, sage1, security1, ses1, tp1, tp2, utility1, wc1)
IMP-00017: following statement failed with ORACLE error 2248:
"ALTER SESSION SET PLSQL_OPTIMIZE_LEVEL = 1 NLS_LENGTH_SEMANTICS = 'BYTE' PL"
"SQL_CODE_TYPE = 'INTERPRETED' PLSQL_DEBUG = FALSE PLSQL_WARNINGS = 'DISABLE"
":ALL'PLSQL_CCFLAGS = ''"
IMP-00003: ORACLE error 2248 encountered
ORA-02248: invalid option for ALTER SESSION
IMP-00000: Import terminated unsuccessfully
How to solve this.

It looks like you're possibly trying to import an Oracle 10.2 export file into 10.1. The only reason I think so is because I don't think PLSQL_CCFLAGS existed in 10.1. Try using statistics=none in the import and/or remove PLSQL_CCFLAGS from the export file by hand using a hex editor; NOTE: make sure you have a backup first.
Of course, this may be caused by something else... but that's all I can think of given the info at hand.

SQL2012: Internal Error: The operation terminated unsuccessfully. The connection timeout was exceeded. Server: The operation has been cancelled

When rendering a SSRS native mode report based on a query to SSAS the report with fail with the following error:
An error has occurred during report processing. (rsProcessingAborted) Cannot read the next data row for the dataset. (rsErrorReadingNextDataRow). The connection either timed out or was lost. Unable to read data from the transport connection:
An existing connection was forcibly closed by the remote host.
Putting a trace on the SSAS instance, I get an error:
Internal error: The operation terminated unsuccessfully. The connection timeout was exceeded. Server: The operation has been cancelled.
I've modified the IIS (6) application pool timeouts, the SSRS rsreportserver.config timeouts, and the SSAS timeouts. Restarted services, rebooted, and still I get this error.
The report will render if I select a shorter time period (less data, shorter query time).
Running SQL2012 (11.0.5058.0), SSAS and SSRS on separate servers, same subnet.
Any help or suggested troubleshooting greatly appreciated.

Please check the links below.
http://www.symantec.com/business/support/index?page=content&id=TECH186577
https://support.microsoft.com/kb/2200755?wa=wsignin1.0
http://msdn.microsoft.com/en-IN/library/ms155782.aspx
http://blogs.msdn.com/b/dynamicsaxbi/archive/2013/02/14/how-to-addressing-ssrs-session-timeouts.aspx

Export terminated with ORA-00600: internal error code, arguments: [kcfrbd_1

when i am taking an export of a particular table , i got following message. please help
ORA-00600: internal error code, arguments: [kcfrbd_1], [0], [400], [], [], [], [], []
Export terminated successfully with warnings.

with out a versioninfo it's not possible tomgive appropiate information. Anyway, an ORA-00600 is almost certainly a job for the oracle support.
And lastly, the right forum for this question would be a database forum, maybe the Database-General-forum.

Export terminated successfully with warnings.

Hi,
I have a 9i database (9.2.0.8.0) running on a HP Unix machine (B.11.11). The database size is 170GB.
When I run a full database export, I get couple of ORA-01403 error.
EXP-00008: ORACLE error 1403 encountered
ORA-01403: no data found
But the end of it, it shows Export terminated successfully with warnings.
Is my export backup valid or do I need to solve the ORA-01403 issue? And how do I solve that?
Request your quick help on this1
thanks!

I checked the Oracle Support notes, but it says that the cause is due to the FILESIZE parameter. But we have not used the FILESIZE parameter in our environment.
And there are enough space in the file system too. So I dont think the spacing is an issue here.
userid=dba_backup/xxxxxx
file=xxxxxx.dmp
compress=n
consistent=y
full=y
rows=y
direct=yThe solution mentioned in the note is:
Solution
-- To implement the solution, please execute the following steps::
Add more files to the file= list to make sure there is enough space available for the export.How do I do that? file=xxxxxx.dmp, yyyyyy.dmp is it?
Thanks!

Export terminated with MCH0601 in AS4EXTRA

Hi,
we have problem and getting dump while client export
export terminated with MCH0601 in AS4EXTRA
regards,
ajay

Hi.
look at SAP Note 548037 - iSeries: Exporting a system with many tables
might help you
regards,
kaushal

[SOLVED] Exporting terminal output to URL?

Hello!
I can't start graphicall user interface (gnome 3) and am stuck in linux terminal. Is there any way i could export my linux terminal commands or files to any URL where i could acess them later on another PC? I know this exists but i forgot how it is done.
TY
Last edited by 71GA (2012-11-19 11:57:10)

I have an alias in /etc/bash.bashrc:
alias web='curl -F "sprunge=<-" http://sprunge.us'
Usage:
$ web < /path/to/file
If it's in my user dir, I don't even have to specify its path:
$ web < .xinitrc
Obviously, if I'm not in my user dir, first I just run a simple:
$ cd

Export terminated with warnings.

Hi All,
Using Oracle 9.2.0.4.0 I did an export from an owner connected as system and the export produces a few errors related to the SYS.LT_EXPORT_PKG package.
EXP-00008: ORACLE error 4068 encountered
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SYS.LT_EXPORT_PKG" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.LT_EXPORT_PKG.schema_info_exp
The command that I´m using is:
exp system/pwd owner=xxx file=xxx_exp.dmp log=xxx_exp.log rows=y constraints=y grants=y statistics=none triggers=y indexes=y compress=y
I´ve visited metalink for help and found some tips:
Connect as sys and grant this privileges before running the export:
GRANT EXECUTE ON sys.lt_export_pkg TO exp_full_database; OR
GRANT EXECUTE ON sys.lt_export_pkg TO PUBLIC;
Run owminst.plb, then, reran catexp.sql , but nothing works. The error still there.
Can these warnings be safely ignored?
Thanks and Regards,
Marcello.

The object type"s status is invalid which may be caused by a dependant type"s modification without cascading the change. You must have the type recompiled using ALTER TYPE COMPILE prior to performing the export operation.
~ Madrid

Export terminated successfully with warnings, warning is ignoreable

Is this waring ignorable?
Connected to: Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
Note: table data (rows) will not be exported
About to export the entire database ...
. exporting tablespace definitions
. exporting profiles
. exporting user definitions
. exporting roles
. exporting resource costs
. exporting rollback segment definitions
. exporting database links
. exporting sequence numbers
. exporting directory aliases
. exporting context namespaces
. exporting foreign function library names
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions
EXP-00097: Object type "SYSTEM"."ValidateTravelBookingRS102_T" is not in a valid state, type will not be exported
"q17alsn.log" 622 lines, 32848 characters
EXP-00097: Object type "SYSTEM"."ErrorType100_T" is not in a valid state, type will not be exported
EXP-00097: Object type "SYSTEM"."TravelSegmentType99_T" is not in a valid state, type will not be exported
EXP-00097: Object type "SYSTEM"."Address98_T" is not in a valid state, type will not be exported
EXP-00097: Object type "SYSTEM"."ValidateTravelBookingRQ96_T" is not in a valid state, type will not be exported
EXP-00097: Object type "SYSTEM"."TravelSegmentType95_T" is not in a valid state, type will not be exported
EXP-00097: Object type "SYSTEM"."Address94_T" is not in a valid state, type will not be exported
EXP-00097: Object type "SYSTEM"."ValidateTravelPlanRS92_T" is not in a valid state, type will not be exported
EXP-00097: Object type "SYSTEM"."ErrorType90_T" is not in a valid state, type will not be exported
EXP-00097: Object type "SYSTEM"."TravelSegmentType89_T" is not in a valid state, type will not be exported
EXP-00097: Object type "SYSTEM"."TravelSegmentType87_T" is not in a valid state, type will not be exported
EXP-00097: Object type "SYSTEM"."MemberInfoRS85_T" is not in a valid state, type will not be exported
EXP-00097: Object type "SYSTEM"."ErrorType83_T" is not in a valid state, type will not be exported
EXP-00097: Object type "SYSTEM"."MemberInfoRQ81_T" is not in a valid state, type will not be exported
. exporting system procedural objects and actions
. exporting pre-schema procedural objects and actions
. exporting cluster definitions
. about to export SYSTEM's tables via Direct Path ...
. . exporting table AQ$_INTERNET_AGENTS

The object type"s status is invalid which may be caused by a dependant type"s modification without cascading the change. You must have the type recompiled using ALTER TYPE COMPILE prior to performing the export operation.
~ Madrid

User Master export terminated with error

Hi Experts,
When I am trying to take user master export; after some time is ends with error 'Communication error, CPIC return code 017, SAP return code 672'
When I check the transport log it has the error
                                                                                28 534.764245
    [dbtrtab     ,03914] ***LOG BY4=>sql error 3106   performing SEL on table USRACL     [dbtrtab#2 @ 3914]
                                                                                493 534.764738
    [dbtrtab     ,03914] ***LOG BY0=>ORA-03106: fatal two-task communication protocol error [dbtrtab#2 @ 3914]
                                                                                31 534.764769
   SQL error 3106 accessing USRACL: ORA-03106: fatal two-task communication protocol e
The system is an EHP4 ERP6 system and oracle version is 11.2.0.2
Could you please advise how can we correct this error
Thanks,
Varun

Do you have latest R3trans anp tp on your system ? Do you have latest Opatch installed for your database ?
Regards,
Subhash

Export terminated "core (Illegal instruction)" with error in AIX

Hi Friends,
I am trying to take an export of 16GB table. It is creating 0byte logfile for the export. And it is taking long time, still its is failing "core(Illegal instruction)".
At same location it is creating one file with the name "core". Database version is 8.1.7.4.0.
I am using below parameters for export.
userid=sys/XXXXX@sfrdw
log=/sfrexport/SFRDW_sfc/exp_SFRDW_sfc.log
statistics=none
direct=n
compress=n
buffer=50000
feedback=500000
indexes=n
tables=SFRDW.SFC
filesize=1073741824
file=(/sfrexport/SFRDW_sfc/SFRDW_sfc_01.dmp,
/sfrexport/SFRDW_sfc/SFRDW_sfc_02.dmp,
/sfrexport/SFRDW_sfc/SFRDW_sfc_15.dmp)
Please help me
Thanks in advance

'AIX' is very global, it should have a version number. Check whether 8.1.7.4 is supported in your environment. If yes make sure you fulfil all software requirements. 'Illegal instruction' is an internal error on OS level and 'core' the dumpfile produced because of this error.
Werner

Characterset mismatch error while export

Hi,
I am getting characterset mismatch error while exporting a schema.
select * from nls_database_parameters where parameter in('NLS_LANGUAGE','NLS_TERRITORY','NLS_CHARACTERSET')
PARAMETER
VALUE
NLS_LANGUAGE
AMERICAN
NLS_TERRITORY
AMERICA
NLS_CHARACTERSET
AL32UTF8
i have set nls_lang on OS level
NLS_LANG = AMERICAN_AMERICA.AL32UTF8
C:\oracle\ora92\bin>
C:\oracle\ora92\bin>
C:\oracle\ora92\bin>exp hrtemp_v6/hrtemp_v6@testdb file=c:\hrtemp_v6 statistics=
none
Export: Release 9.2.0.1.0 - Production on Mon May 14 11:55:58 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user HRTEMP_V6
. exporting PUBLIC type synonyms
EXP-00008: ORACLE error 6552 encountered
ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-553: character set name is not recognized
EXP-00000: Export terminated unsuccessfully
please suggest , whats wrong here
thanks & regards

i have set nls_lang on OS level
NLS_LANG = AMERICAN_AMERICA.AL32UTF8How and where?
C:\oracle\ora92\bin>At this command prompt, what do you get back from "set nls"
You can use
c:\> set nls_lang=.al32utf8
...right before you issue exp command.

Export Terminated Unsuccessfully

Similar Messages

Maybe you are looking for