Export without Markup - JavaScript Error (ExtractTemplateXML.js)

Whenever I try the "Export without Markup" function, I get this error:
"While executing onClick in ExtractTemplateXML.htm, the following JavaScript error(s) occurred: At line 78 of file "C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC\Configuration\Commands\ExtractTemplateXML.js": Exception thrown in native function."
How do I resolve this?

I know this post is old, but as I was having this issue lately, and managed to fix it - I thought I'd post the solution that worked for me, since I haven't seen it elsewhere.
In short:
Make sure there are no .zip files in the site you are exporting. I noticed my error was showing up right around when the export hit the folder where I had a .zip file.
Go through and delete all of the /_notes/ garbage folders that DW puts in your source site.
After I did both of these things, my export worked fine.

Similar Messages

  • Export without Markup - How ?

    I can't figure out how to export without markup. I did it
    before but now can't
    What I want to do is export all the site pages and
    images/scripts/etc without markup
    I'm using DW 8
    Would someone mind explaining this to a total dummie
    Many thanks :-)

    > I think I just want to strip out DW markup, leave the
    html and code stuff
    >
    > I know it will disconnect the uploaded pages from the
    template but I'll make
    > the 'upload' dir contents kind of like a third leg of
    the editing. There will
    > be LOCAL, REMOTE, and UPLOAD
    Refer to my first reply-
    Dw menu-->Modify-->Templates-->Export without
    markup.
    export to a NEW folder, not within this site.
    Then go to menu->Site-->Manage Sites.
    Make a new site definition (or duplicate the present one)
    Define this new site's Local Site Folder to where you
    exported the files.
    You now have two sites- One for editing, with the template
    markup intact.
    One for uploading with the template markup stripped.
    Note- the template markup is a handful of html comments.
    There isn't any
    real advantage to stripping it out.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Fix for Dreamweaver CC 2014.1 JavaScript Error With All ASPX Files

    Entire morning wasted.
    Adobe's upgrade to Dreamweaver 2014 to 2014.1 on Windows 7 Professional has broken the product across the board and it no longer opens any .aspx pages correctly.  A large number of people use .NET and now we can no longer access/use these files/pages without multiple JavaScript errors.  Particularly those that have edited the MMDocumentTypes file to make the product work in the first place since they stopped supporting the users that develop in ASP.NET.
    Every time a .aspx file is now opened, the following JavaScript error is received: "While executing translateCustomControl in ExternalRenderers.html, a JavaScript error occurred.  Click 'close' and it appears again...over and over.  Our sites are all unable to open in DW because of this.  It worked fine in earlier versions of DW, including 2014.  It's only 2014.1 that broke everything.
    The fix for this:
    1. Follow instructions on this out-of-date help file: Change, add recognized file extensions | Dreamweaver
    2. (and the part that's new): The MMDocumentTypes file is located in  C:\Users\*your username*\AppData\Roaming\Adobe\Dreamweaver CC\Configuration\DocumentTypes directory. Open that file and add aspx back to the <documenttype id="HTML"> declaration at the top.
    I am posting this issue here in hopes that some of the users won't waste most of the day trying to figure this out.
    Chris Lee

    Hi Ivan,
    I'm having that exact same problem now...in addition to that JavaScript error message coming back.  I submitted a bug report last week about this and received the following reply:
    Hi Chris,
    We would like to let you know that we able to reproduce this issue at our end. Thanks for reporting this.
    We will try to prioritize it for fixing. This might take some time. We thank you for your patience with us in this regard.
    Please let us know if you need help regarding anything else. We will be more than happy to help you.
    Thanks,
    Arindam Ghosh
    Dreamweaver Team,
    Adobe Systems
    Hopefully they can get this fixed soon, as it's ground my work in the software to a halt.
    Chris

  • Still getting Javascript error with new version of UIX

    I'm facing some problem after changing my UIX framework version (2.2.3030829.1626).
    Currently I'm using UIX version (2.2.3030829.1626) . Paging with table is not working with new frame work .
    It is giving me javacript error "object doesn't support property or method" when clicking 'Next' .
    It's working fine with old version.
    We had used proper cabo directory. These files are in sync with the version of the runtime
    Here is our finding
    I found a error in _updateFormActions() function from MarlinCoreb2.js file.
    In this function it is giving error at
    if(a8!=a6)
    a7.action=a6 line (line # 1841,1842). If I comment out this two lines page is
    working properly without any javascript error.
    This problem is a bit tricky....
    Because it seems to be a problem with the UIX framework that only occurs on some versions of the Internet Explorer. On some version (IE 6.0.2600.0000) it works fine
    and it also works on the Mozilla Firefox browser.
    Can any one advice on the same?
    Thanks in advance
    Anindya

    I answered this question on a different thread.
    Do NOT post the same question multiple times. If you require more complete or prompt assistance than you receive on these forums, contact Oracle Support.
    -brian

  • Javascript error with new UIX framework

    Hi,
    I'm facing some problem after changing my UIX framework version (2.2.3030829.1626).
    Currently I'm using UIX version (2.2.3030829.1626) . Paging with table is not working with new frame work .
    It is giving me javacript error "object doesn't support property or method" when clicking 'Next' .
    It's working fine with old version.
    Any help is much appreciated.
    Thanks and Regards,
    Anindya

    Thanks Brian for your prompt reply
    We had used proper cabo directory. To confirm it we have done it once again.But we're still getting the same error.
    here is our finding
    I found a error in _updateFormActions() function from MarlinCoreb2.js file. 
    In this function it is giving error at
    if(a8!=a6)
    a7.action=a6 line (line # 1841,1842). If I comment out this two lines page is
    working properly without any javascript error.
    This problem is a bit tricky....
    Because it seems to be a problem with the UIX framework that only occurs on some versions of the Internet Explorer. On some version (IE 6.0.2600.0000) it works fine
    and it also works on the Mozilla Firefox browser.
    can you please advice is there any solution
    Thanks in advance
    Anindya

  • Export/Print Javascript error

    Just recently I've noticed I'm getting a Javascript error when i try to export or print a report from the toolbar in my crystal reports viewer.
    The export pop up comes up normally, but when i click 'OK' I get this error:
    opener.document.getElementById("crystal_handler_page") is null
    Any info would be greatly appreciated.

    Can you please tell us your product and application details ?
    Also please make sure that you have crystalviewers11/crystalviewers115 is located under c:\Program Files\Common Files\Business Objects\xx\ .
    Hope it helps.
    AG.

  • Need help with Muse PHP (JavaScript error...email)

    Hey all....
    I searched and did not see an answer for this:
    I am exporting my Muse file to HTML and keep getting this error for my Contact Us page (email issue):
    "JavaScript Error:Form PHP Script is missing from web server, or PHP is not configured correctly or your web host provider.  Check if the form PHP script as been uploaded correctly, then contact your hosting provider about PHP configuration."
    What PHP version does MUSE support....5.1?  I contacted HostGator and they just updated my PHP to 5.5 and asked me what PHP MUSE needs. HostGator says 5.1 is old and they do not support 5.1. Can anyone help me?
    Also, when I try to check PHP with: http://my-site.com/scripts/form_check.php I just get an "oops" screen, but does not verify my PHP.????
    Thanks

    Difficult to debug without the URL for the form page on your site...
    Are you using the built-in File > Upload to FTP Host in Muse? Or did you use File > Export as HTML and uploaded with some other tool?
    Does http://<insert your domain name here>/scripts/museutils.js load anything? Or does it also give an "oops" screen? If it gives an "oops" screen, that would imply not all the exported files were uploaded to your server, they weren't uploaded to the correct location, or the permissions aren't set correctly.
    For forms Muse only requires PHP 4.1 or later. PHP version is not the issue.

  • HTML Tags within Javascript Errors

    Hi,
    Is there a way to insert html tags (<b>Bold Text Here</b>), inside a javascript string in the <script> tag, without any Validation errors? I read to put a backslash at the beginning of each html tags to prevent the string from being parsed as markup (<\b>Bold Text Here<\/b>). Errors goes away, but bold texts too !
    Anyone can help me on this one ... I'm not a javascript Guru ...
    Thanks !

    All wrong... Correct string notation always requires single or double quotation marks:
    "\b this is a string"
    \b this is garbage
    Additionally, whan you escape characvters, each one must be escvaped separately:
    \b ... \/\b
    Mylenium

  • Report Viewer Javascript error

    I have a good report that works great if I export to pdf.
    objdoc.ExportToDisk (ExportFormatType.PortableDocFormat, "c: \ \ testreport.pdf");
    When I load the CrystalReportViewer
    CrystalReportViewer1.ReportSource = objdoc;
    returns a javascript error:
    TreeWidget_getHTML JScript
    file:
    allinOne.js
    this instruction:
    to for (var D in E) {B [C + +] = E [D]. getHTML (F.initialIndent, D == 0)
    because b[c++] is undefined for some values ...
    The only problem I have when I load the report in the ReportViewer.
    The old crystalreportviewer 10.0.53 works on VS2008 now i like import this aspx on VS2010 but i have this problem.

    Is there any resolution for the above issue?
    I have the similar problem.
    To reproduce the error just add a reference to a js script file in the page head:
    <script src="/Scripts/ClassExtentions.js" type="text/jscript"></script>
    where the Array prototype has an extension like: "Array.prototype.testing = true;"
    on loading the page an error occurs in treeview.js TreeWidget_getHTML() function:
    ..sub[i].getHTML < is undefined (Object doesn't support this property or method) = no getHTML function.
    Verifying function (prototype property) availability is missing from other code parts as the next error is in palette.js PaletteWidget_init function:
    ..item.init() < is undefined = no init function for the runtime object, item..
    tryed this fix (works fine):
    treeview.js line 711
         for (var i in sub)
           if (sub[i].getHTML) a[j++]=sub[i].getHTML(o.initialIndent,i==0)
    best regards, Zsolt

  • 10.1.3 Faces: Javascript error on PPR

    Hi all,
    I'm getting a Javascript error during PPR in IE 6.0. This error does not appear in FF 2.0. The error is "Invalid Argument" on line 2984 of adf/jsLibs/Common10_1_3_2_0.js:
    form.removeChild(tempParams[paramName]);
    Research suggests that this error should occur when "tempParams[paramName]" was created in a different document from "form", and sure enough, with a DOM inspector, I was able to determine that the documents have different unique IDs.
    Does anyone know why this might be happening? It doesn't happen in all my pages, but I can't figure out what might be special about this one.
    Thanks much,
    Avrom

    Hi Frank,
    The development environment is JDev 10.1.3.2; I can see if upgrading makes a difference--but the error is actually appearing in the deployed environment, which is Oracle AS 10.1.2.
    The error is getting reported by Microsoft's script debugger--without it, there's a brief flash of a warning symbol in the IE status bar, but it disappears quickly.
    The reason I care about this error (although it's transient and doesn't really seem to affect the outcome of that PPR) is that I suspect it as the culprit in more worrisome behavior--after this error appears once, the <af:messages> component on the page will no longer refresh until the page is left and returned to (although no error is reported at that time). I'm so suspicious because they always go together--I've never been able to get the component to refresh after getting this error, or to keep it from refreshing without getting it. This includes the fact that neither problem surfaces in FireFox.

  • OnClick JavaScript error

    I have made several changes to my nav bar through Fireworks
    and exported, which I have done a million times, but this time when
    I inser Fireworkd HTML image it gives me the following message:
    While executing onClick in Fireworks HTML.htm, the following
    JavaScript error occurred:
    At line 438 of File C:\Program Files\Macromedia\Dreamweaver
    MX 2004\Configuration\Shared\MM\Scripts\InsertFireworksHTML.js":
    TypeError: menuFn.match(searchPatt)has no properties.
    I should tell you we have two sites we are putting this in.
    One to test pages and one that is live.
    Any help would be great!
    BigD

    Don't use FW menus.
    You can try this simple fix -
    Quit DW.
    Find this folder -
    C:\Documents and Settings\<username>\Application
    Data\Macromedia\Dreamweaver
    8\Configuration\WinFileCache-*.dat
    (these folders are normally hidden - you may have to use
    Explorer > Tools >
    Folder Options to unhide them)
    or on Mac -
    Library/Application Support/Macromedia/Dreamweaver
    8/Configuration/MacFileCache-*.dat
    and delete it.
    Restart DW. Works better?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "BigD05" <[email protected]> wrote in
    message
    news:es6jpt$551$[email protected]..
    >I have made several changes to my nav bar through
    Fireworks and exported,
    >which
    > I have done a million times, but this time when I inser
    Fireworkd HTML
    > image it
    > gives me the following message:
    >
    > While executing onClick in Fireworks HTML.htm, the
    following JavaScript
    > error
    > occurred:
    > At line 438 of File C:\Program
    Files\Macromedia\Dreamweaver MX
    >
    2004\Configuration\Shared\MM\Scripts\InsertFireworksHTML.js":
    TypeError:
    > menuFn.match(searchPatt)has no properties.
    >
    > I should tell you we have two sites we are putting this
    in. One to test
    > pages
    > and one that is live.
    >
    > Any help would be great!
    >
    > BigD
    >
    >

  • JavaScript error message

    In the middle of using Dreamweaver 8 today, I received
    several error messages when trying to open and/or save a file:
    Message #1
    The following javascript error(s) occurred:
    At line 56 of File "C:\Program Files\Macromedia\Dreamweaver
    8\Configuration\Shared\Common\Scripts\dwscriptsExtData.js"
    ReferenceError: dwscripts is not defined.
    Message #2
    While executing onLoad in_onOpen.htm the following JavaScript
    error(s) occurred:
    In file ""_onOpen"":
    Reference Error: onOpen is not defined.
    Message #3
    The following translators were not loaded due to errors:
    ASP.htm: has configuration information that is invalid
    ColdFusion.htm: has configuration information that is invalid
    JSP.htm: has configuration information that is invalid
    PHP_MySQL.htm: has configuration information that is invalid
    XSLT.htm: has configuration information that is invalid
    XSLTransform.htm: has configuration information that is
    invalid
    Message #1 and #2 show up two times when trying to open a
    file. Message #3 and then Messages #1 and 2 show when trying to
    close a file after changes (it asks first "Save changes..." . . .
    if I click on yes, then the error messages occur, but when they are
    dismissed by clicking on OK, the file seems to be saved, because
    the corrected file is uploaded when using FTP. If I try to save the
    changed file by using File>Save As... nothing will happen.
    I used the Remove Program function in Control Panel, and then
    re-installed Dreamweaver 8 using my Studio 8 CD#1 and following the
    Wizard prompts. The files still show in the "local sites: list and
    I can open the files (albeit with the error messages above) and the
    changed/edited files are still saved and FTP'd to my server. So
    from the end-user view, all is OK. But... this is different this
    afternoon from how it was working this morning.
    Can anyone suggest how I should proceed to make it work
    without the error messages?
    TIA --
    Joyce

    Have a read of this article:
    http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_19105
    and if that doesn't help you can try this:
    Quit DW.
    Find this folder -
    C:\Documents and Settings\<username>\Application
    Data\Macromedia\Dreamweaver
    8\Configuration\WinFileCache-*.dat
    (these folders are normally hidden - you may have to use
    Explorer > Tools >
    Folder Options to unhide them)
    Delete it. Restart DW and hopefully you're fixed.
    Nadia
    Adobe� Community Expert : Dreamweaver
    http://www.csstemplates.com.au
    - CSS Templates | Free Templates
    http://www.perrelink.com.au
    - Web Dev
    http://www.DreamweaverResources.com
    - Dropdown Menu Templates|Tutorials
    http://www.adobe.com/devnet/dreamweaver/css.html

  • Javascript error while creating trees

    Hi
    I had to create a tree of the structure
    customerA
    ->siteA
    ->equip1
    ->equip2
    ->siteB
    ->
    ->
    customerB
    ->siteB
    ->equip4
    ->equip4
    now i have created a view from three tables and the structure of the view is as follows
    equipmentid, equipmentname, customerid, customername, siteid,sitename
    i did try giving two queries
    1.select equip_id AS id,
    customer_name AS pid,
    customer_name AS name,
    null AS link,null AS a1,null as a2
    from TREE_VIEW
    union
    select equip_id as id,
    null AS pid ,
    site_name AS name,
    null AS link,
    null AS a1,
    null AS a2
    from TREE_VIEW
    union
    select 0 AS id,null AS pid,'CUstomers' AS name, null as link,null as a1,null as a2 from dual
    2.select case when connect_by_isleaf = 1 then 0
    when level = 1 then 1
    else -1
    end as status,
    level,
    "#OWNER#"."TABLE_VIEW2"."CUSTOMER_NAME" as title,
    null as icon,
    "#OWNER#"."TABLE_VIEW2"."CUSTOMERID" as value,
    "#OWNER#"."TABLE_VIEW2"."CUSTOMERID" as tooltip,
    null as link
    from "#OWNER#"."TABLE_VIEW2" ,"CUSTOMER"
    start with "#OWNER#"."TABLE_VIEW2"."CUSTOMER_NAME" is null
    connect by prior "CUSTOMER"."CUSTOMERID"="#OWNER#"."TABLE_VIEW2"."CUSTOMERID"
    order siblings by "#OWNER#"."TABLE_VIEW2"."CUSTOMER_NAME"
    while giving both the queries iam getting the page to display without the tree and i views the source code
    and i found out that there was a javascript error
    <script type="text/javascript">
    *var l11216839203914159236Data = [*
    ORA-01403: no data found
    <div class="clear"></div></div></div></div>
    <div class="rc-bottom"><div class="rc-bottom-r"></div></div>
    </div> </td>
    <td class="tbl-sidebar"></td>
    </tr>
    </tbody>
    </table>
    </div><div id="footer"><div class="content">
    how to overcome this error and what might me the error for this error?

    Hi,
    Actually the data is not coming through query.Check the parent, value parameters properly.
    Thanks and Regards
    Maheswara

  • BI Publisher Javascript error when creating a report

    Hello,
    I am trying to create a report in BI Publisher and the following comes up:
    Message JavaScript Error: Failed to load: io/catalog/read-report
    Supplemental Detail fileName: http://<hostname>/xmlpserver/js/xdo_rel.js?cacheBuster=53
    lineNumber: 1
    I am stuck with this error and cannot find anything about it in the internet. I used to be able to create a Report in BI Publisher. On the other hand when I try to edit an existing report, I can do so without any issues.
    Please advise. Thank you.

    Ok, so...
    The funny thing is that it didn't work the first time I tried to change the name of my column, and now it works !
    So it's right that 2 columns can't have the same alias, I'm sorry, I'm new even with the SQL, it's a long story...
    I would like to change your message to "Correct" but I can't...
    Thanks Roel !

  • What are the reasons for following Javascript error in Report Viewer

    Post Author: dhuka
    CA Forum: Crystal Reports
    Hello Everybody!
    I am using Crystal Reports 10 in my web application. But unfortunately I am surrounded with strange problem related to it because of which I have been unable to deploy is on client-side. In my application the error given below is displayed as javascript error in Report Viewer and report is not displayed. But more frustrating part is that I am getting the same error due to different problem with reporting and I am stuck with it as I am unable to figure out what's causing the error now. Earlier this error appeared due to problem with parameter passing to stored procedure which I resolved it and error vanished but once again it has shown up. Moreover this error now appears less frequently and randomly therefore it is even difficult to trace the cause.
    Problem with this Web page might prevent it from being displayed properly or functioning properly. In the future, you can display this message by double-clicking the warning icon displayed in the status bar.
    Line: 40Char: 12Error: Expected ')'Code: 0URL: http://myServer/myApp/myForms/myReports/ReportViewer.aspx
    So can anybody tell me what factors might be causing this errors as the error text is very vague in nature and gives no idea about the actual error.
    Guys, I hope for your kind co-operation.
    Regards,

    Post Author: dhuka
    CA Forum: Crystal Reports
    Thanks for you reply Krishna.
    But this syntax error is the one that is creating problem for me as I cannot trace it. The form ReportViewer.aspx contains only a report viewer object which remains un-binded to any ReportDocument even at runtime.
    At code behind ReportViewer.aspx I have code below that associates SQL Stored Procedure Parameter and Report Filter along with report name. Once all above is associated with ReportDocument, I export ReportDocument to PDF file format and display the report. Here I dont' even bind ReportDocument with my ReportViewer. Moreover, as I mentioned previously this error is encountered randomly (with no reasonable explanation so far) on client PC (while browsing through application).
    I hope below code give you good idea of the way I am implementing my reporting.
    Looking forward to you solution. Please note that I am only passing the ReportFileName and Parameter and Filter Criteria to this form while dataTable by itself using the connection information.
    <<<<<<<<<<<<<<<<<CODE BEHIND of REPORTVIEWER.ASPX>>>>>>>>>>>
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
    Dim strKeys() As String
    Dim strReportFilter As String
    Dim strReportName As String
    Dim strError As structError
    Try
    ReDim strKeys(0)
    If strReportName = "" Then
    strReportName = Context.Session("ReportName").ToString()
    If Not Session("ReportParameters") = Nothing Then
    Dim char_Delimiter() As Char = ";".ToCharArray()
    strKeys = Session("ReportParameters").ToString().Split(char_Delimiter)
    End If
    If Not Session("ReportFilter") = Nothing Then
    strReportFilter = Session("ReportFilter").ToString()
    End If
    Else
    Session("DataTable") = Nothing
    End If
    If Not ViewParameterReport(strReportName, strKeys, strReportFilter, strError) Then
    ASPNET_DisplayErrorMessageBox(strError.strMsg, Me)
    Exit Sub
    End If
    Catch ex As Exception
    strError.strMsg = Err.Description
    ASPNET_DisplayErrorMessageBox(strError.strMsg, Me)
    Finally
    End Try
    End Sub
    Private Function ViewParameterReport(ByVal str_ReportName As String, ByVal str_ReportParameters() As String, ByVal strReportFilter As String, ByRef strError As structError) As Boolean
    Dim str_ReportPath As String = CStr(ConfigurationSettings.AppSettings.Get("ReportPath"))
    Dim crLogInfo As TableLogOnInfo
    Dim crConnectionInfo As ConnectionInfo
    Try
    str_ReportPath = CStr(ConfigurationSettings.AppSettings.Get("ReportPath"))
    o_Rpt = New CrystalDecisions.CrystalReports.Engine.ReportDocument
    o_Rpt.Load(str_ReportPath & "\rpts\" & str_ReportName)
    If Context.Session("DataTable") = "" Then
    crLogInfo = New TableLogOnInfo()
    crConnectionInfo = New ConnectionInfo()
    crLogInfo = o_Rpt.Database.Tables(0).LogOnInfo
    crConnectionInfo = o_Rpt.Database.Tables(0).LogOnInfo.ConnectionInfo
    clsDbCnn.SetDBProperties()
    crConnectionInfo.ServerName = clsDbCnn.Server
    crConnectionInfo.DatabaseName = clsDbCnn.Database
    crConnectionInfo.UserID = clsDbCnn.UserID
    crConnectionInfo.Password = clsDbCnn.Password
    crLogInfo.ConnectionInfo = crConnectionInfo
    o_Rpt.Database.Tables(0).ApplyLogOnInfo(crLogInfo)
    Else
    ds_MISReports = New DataSet()
    ds_MISReports = CType(Session("DataTable"), DataSet)
    o_Rpt.SetDataSource(ds_MISReports)
    End If
    If Not IsPostBack Then
    Dim param_Fields As CrystalDecisions.Shared.ParameterFields = New ParameterFields()
    Dim iCount As Integer
    If str_ReportParameters.GetUpperBound(0) <> 0 Then
    For iCount = 0 To str_ReportParameters.Length - 1 Step 2
    o_Rpt.SetParameterValue(CStr(str_ReportParameters(iCount).ToString()), CStr(str_ReportParameters(iCount + 1).ToString()))
    Next
    o_Rpt.RecordSelectionFormula = strReportFilter
    End If
    End If
    'crViewer.DisplayGroupTree = False
    'crViewer.ReportSource = o_Rpt
    SetDBLogonForReport(crConnectionInfo, o_Rpt)
    Dim TargetFileName As String
    Dim fs As System.IO.FileStream
    Dim FileSize As Long
    Dim GenDS As DataSet
    'Dim oRD As New ReportDocument()
    Dim crReportObject As CrystalDecisions.CrystalReports.Engine.ReportObject()
    Dim oExO As ExportOptions
    Dim oExDo As New DiskFileDestinationOptions()
    'Build Target Filename
    TargetFileName = str_ReportPath & "\Pdfs\" & Session.SessionID & ".pdf"
    'Export to PDF
    oExDo.DiskFileName = TargetFileName
    oExO = o_Rpt.ExportOptions
    oExO.ExportDestinationType = ExportDestinationType.DiskFile
    oExO.ExportFormatType = ExportFormatType.PortableDocFormat
    oExO.DestinationOptions = oExDo
    o_Rpt.Export()
    o_Rpt.Close()
    'Send the file to the user that made the request
    Response.Clear()
    Response.Buffer = True
    Response.AddHeader("Content-Type", "application/pdf")
    Response.AddHeader("Content-Disposition", "attachment;filename=MyReport.pdf;")
    fs = New System.IO.FileStream(TargetFileName, IO.FileMode.Open)
    FileSize = fs.Length
    Dim bBuffer(CInt(FileSize)) As Byte
    fs.Read(bBuffer, 0, CInt(FileSize))
    fs.Close()
    Response.BinaryWrite(bBuffer)
    Response.Flush()
    Response.Close()
    o_Rpt = Nothing
    Return True
    Catch ex As Exception
    strError.strMsg = Err.Description
    Return False
    Finally
    crConnectionInfo = Nothing
    crLogInfo = Nothing
    End Try
    End Function
    Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, _
    ByVal myReportDocument As ReportDocument)
    Dim myTables As Tables = myReportDocument.Database.Tables
    Dim count As Integer
    For count = 0 To myTables.Count - 1
    Dim myTableLogonInfo As TableLogOnInfo = myTables(count).LogOnInfo
    myTableLogonInfo.ConnectionInfo = myConnectionInfo
    myTables(count).ApplyLogOnInfo(myTableLogonInfo)
    myTables(count).Location = myConnectionInfo.DatabaseName & ".dbo." & myTables(count).Location.Substring(myTables(count).Location.LastIndexOf(".") + 1)
    myTables(count).LogOnInfo.ConnectionInfo.ServerName = myConnectionInfo.ServerName()
    Next
    End Sub

Maybe you are looking for