Exporter plug-in doesn't run when open by clicking .prproj file

Hi everyone!
I am creating an exporter plug-in. It works fine when I open Premiere, open a project and choose to export using my plug-in. But when i open a project directly by double clicking the project file (like untitled.prproj), my plug-in always show up a "Error compiling movie" message.
I use log4cxx to help track the plug-in, but no log was created, so my guess is that the plug-in has not even been loaded.
Could anyone tell be the differences between starting Premiere -> open a project and open a project directly by double clicking its .prproj file. In both case, which file is loaded and which file is not?
I'm very appreciated if anyone would have the same problem and tell me how to fix this. I'm really stuck here

The version is CS5.5.
And my steps are:
1. open the project by double clicking the .prproj file
2. select a file in the project
3. Choose File -> Export -> Media
4. Select my plug-in in the drop down list and choose Export
=> Error
But if take these step:
1. Open Premiere Pro
2. select a project
3. select a file in the project
4. Choose File -> Export -> Media
5. Select my plug-in in the drop down list and choose Export
the plug-in run just fine.
So I think that there are something different between opening a project directly and open Premiere and choose a project. Could you verify this for me? Thanks.

Similar Messages

  • Excel 2007 ribbon freezes when opening (double clicking) a file from a network share

    So unlike other post I have found when double clicking an excel file from a network share the ribbon is frozen. If I start excel from the start menu then open the file through recent documents browse to the file from within excel the ribbon is active.
    Also, the preview pane is not active so it is not that issue.

    Hello-  I am having the same issue with a client in my office.  Minimizing then bringing it back up fixes the problem but it is still a hassle.  Have you found out anything else?  Thanks - Erik

  • Is it possible to have a VI "run when opened" when accessed via Internet Explorer?

    I am trying to get a remote panel application to "run when opened" when is accessed via Internet explorer. I have multiple remote panel licenses on the server and the VI is Re-entrant. The application works well except for this issue. Having the VI "Run When Opened" via IE is very important to the user. As is, when IE opens, the user must click on the panel image once to get the VI's attention and then again on the start arrow to run the program. Is there any way around this or a way to simplify the process?
    Thanks.
    Solved!
    Go to Solution.

    This is actually the intended operation of remote front panels, however, we can simplify the operation to meet closer with what your customer wants.  Basically, if you were to always have your program run in somewhat of an idle state, you can use the Application Control>>Property node for 'RemotePanel.ConnToClients' property to determine when a user is connected and run the proccess of the program as soon as a connection is detected.  When no connection is detected you could have the program run in an idle state.  The attached screenshot shows a general way to do this.  Have a good evening!
    -Bob
    -Bob
    Attachments:
    idle state.JPG ‏45 KB

  • Why does compiled (EXE) VI run when you double-cli​ck the icon even though I un-checked "Run When Opened"?

    My VI code uses the VI's that came with the NI  USB-8451  USB-to-SPI converter.  Before compiling I needed to use one of those VI's to select the particular USB device that I'm trying to address, then I click the Run button.  But after I compile my code into an EXE file, and then double-click the executable file it immediately starts running without allowing me to select the USB device - even though I un-checked the "Run When Opened" box.  In fact I also un-checked the Show Menu Bar and Show Scroll Bars boxes as well, yet it shows both of them.  What am I doing wrong?

    It seems silly to start and stop a built LabVIEW application from the toolbar. A complete application should always run and have the LabVIEW toolbar hidden. A user of you code is not supposed to be familiar with LabVIEW mechanics.
    You should do all this in code. Really!
    Do a nice state machine with at least two states. (1) a state for where the device has not been entered and is simply waiting for your input, and (2) another state that verifies your device input and hands it to the rest of the code for afterwards.
    Still, what LabVIEW version do you have. Did you set the "run when openend" setting in the application builder for the desired VI or just in the VI itself?
    LabVIEW Champion . Do more with less code and in less time .

  • In application builder the top level vi is always set to "run when opened"; how do I turn this off so I don't have to change it each and every time I build a .exe??

    I build a lot of executables using Application Builder under LabVIEW and in every one I build, I don't want the top level vi to take off and run when I open the executable. Currently, I edit each .exe I build within Application Builder and change the option of "run when opened" from Yes to No for the top level vi. All the other subvi's are already set to No. It would seem as though there should be some way to "turn this off" if you will so the top level vi is not always set to "run when opened" by default within Application Builder. Is there such a solution that anyone knows of?? Any help would be apprec
    iated... thanks...

    Indeed the Application builder forces "run when opened" to true for top levels VIs. If you don't want your VI to make any real work when the application starts, you should simply put a do-nothing loop in the beginning of the VI that will loop until the user presses a boolean. It will be more intuitive for users to press a Run button on the FP than clicking on the white Run arrow in the bar.
    LabVIEW, C'est LabVIEW

  • Compiled vi always runs when opened, Labview 2013 bug?

    I'm presuming it's not a bug, but right now it looks like that:
    I compile a vi to an exe using the application builder, but no matter how I adjust the settings, the vi will always run when opened.
    I'm running LabVIEW 2013.
    Lars Melander
    Uppsala Database Laboratory, Uppsala University

    The start up vi will run.  This is expected behavior.
    If you want the running vi to wait for user input before executing a process you need to code a proper arcetecture to do that.  Look into the Producer Consumer (Events) design pattern.  It is a good way to start an application like you describe.
    Spoiler (Highlight to read)
    See, asking a question (or at least explaining what behavior you want) gets more specific answers.
    See, asking a question (or at least explaining what behavior you want) gets more specific answers.
    Jeff

  • Why does application run when opened

    If I run the executable it pops up and automatically runs.  I had thought this was by design, but I have one application I built that does not automatically execute when called. I can't see any difference in the way I set them up, nor do I see a control in the application builder interface.
    SOOOOooo, how do I keep the applications from automatically running when called?  
    -Regards
    eximo
    UofL Bioengineering M.S.
    Neuronetrix
    "I had rather be right than be president" -Henry Clay
    Solved!
    Go to Solution.

    This is done in the main VI's properties. See if you can find it in the attached screenshot.
    You can also override it in the build spec.
    Attachments:
    run when opened.png ‏45 KB
    customize properties.png ‏49 KB

  • Ai and eps will not open in Ai when you double click the file icon or drag onto to app icon

    I get the following error messages when I double click the files icon or drag the file to the Ai app icon in the dock. The only way to open the files is via File > Open with in the app.
    Photoshop and InDesign files open fine, it's just Illustrator.
    The document “xyz.ai” could not be opened. Illustrator cannot open files in the “Adobe Illustrator Document” format.
    The document “xyz.eps” could not be opened. Illustrator cannot open files in the “EPS File” format.
    Running CS5.5 on Mavericks then Yosemite.

    th1nk,
    I believe the right order/way is to update the OS, then reinstall the applications. Was that how you did it?

  • My Fonts change when opening an InDesign CS4 file with InDesign CS6

    I've been experiencing strange behaviour when opening a InDesign CS4 file file with InDesign CS6: the kerning and spacing is all off:
    Original file:
    opened in InDesign CS6:
    Is this a conversion error? Is there a setting/pref I've got wrong?

    It's more than a year ago since this issue was reported, but at this time I'd had the same problem when opening a CS4 document in CS6/CC.
    I was amazed that a header, placed in capitals, looked different in CS6/CC. But at last, after several tests, i've came to the conclusion that "forced" capitals behaving different than "real" capitals. In others words: when you forcing text to capitals the kerning would be different in CS6/CC. When you place text in real capitals (Shift + text) the kerning is the same as in both InDesign versions.
    Text in CS4:
    As you can see: in CS4 there's no difference between real capitals en forced capitals.
    Below the results when opening the CS4 file in CS6/CC:
    I'm not sure if there are still people struggling with this problem, but hopefully was is this helpful.    

  • I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

    I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

    Hi rmarchione,
    Can you try restoring preferences and let us know if it helps?
    Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
    Thanks,
    Preran

  • Hi everyone i tried to modify BCA so i can use a usb to load windows via BCA but now it doesn't load when i double click it!?

    i tried to modify BCA so i can use a usb to load windows via BCA but now it doesn't load when i double click it!? any ideas?

    iv solved it now

  • There was a problem sending the command to the program when opening Microsoft Project 2010 files

    When opening MS Project 2010 files from the file and print server, I receive "There was a problem sending the command to the program."  Copy the same file to my local drive and the file opens fine.  This can be repeated by several other
    users.  Created a simple project file and once the size hit 1 MB, the error appeared.  The error appears on all files over 1 MB.
    I am a domain admin, so it is not a rights issue.  This does not seem to be a network latency issue, the file copies extremely fast.
    Any ideas?

    This message appears to be caused by Windows Explorer trying to send old-fashioned DDE messages to the Application.
    Since MS Project has no "Ignore DDE messages" setting you might want to go change the compatibility settings for WinProj.EXE (and any shortcut to it) to Windows 7 or greater.  Hopefully then Windows Explorer will stop trying to send DDE messages.
    Another possible culprit is older versions of the WinZip explorer extensions - I would disable them as well.
    Good luck,
       James.
    James Boman - http://www.boman.biz Software Consultant for IPMO - http://www.ipmo.com.au

  • Hi, I have a problem with opening files on my desktop. When i double click a file I would lime to open nothing happens. Please help me with this problem :)

    Hi, I have a problem with opening files on my desktop. When i double click a file I would lime to open nothing happens. Please help me with this problem

    hello, this might be a preference in your google search settings. go to google.com/preferences and disable the option to ''Open search results in a new browser window''.

  • When opening a nikon raw file in cs5, ACR, the sky turns red, but is not red in thumbnail

    when opening a nikon raw file in cs5, ACR, the sky turns red, but is not red in thumbnail

    You most likely have the clipping indicator on that shows you blown out areas.  Click the little triangle in the upper right of the histogram to turn it on or off.

  • MacAfee stops Photoshop when open directly a PSD file.

    Is MacAfee and Photoshop compatibles ?
    As MacAfee stops Photoshop when open directly a PSD file, the message is "OverFlow problem,internet acces stopped"

    With the advent of real-tiime scanning anti-virus, anti-malware and anti-anything software, we are seeing all sorts of issues with video editing, and not just with McAfee products, though more reports do seem to come in, regarding one, or another of their programs.
    While video editing involves larger files, usually, than Image editing, the issues are very similar. Many of those real-time scanning programs will "lock" files on writes, and many of them on reads, as well, while doing a complete survey of the file(s). This can cause all sorts of issues, like program time-outs in Ps, or Premiere Pro (or PrElements).
    With some, the "white-listing" that Pierre refers to can be done on certain file types, such as .PSD, .AVI, and others, that are not common carriers for evil code. Also, some will allow the white-listing of programs, which can then allow those programs to read/write to files as necessary, regardless of the file's type. It just depends on the exact anti-whatever program.
    One option is to shut such software down, during editing sessions, BUT they should NOT multi-task with the Internet, e-mails, etc., while the protections are down.
    Good luck,
    Hunt

Maybe you are looking for