Exporting data from R/3 system as IDOCs

As I am working with MDM and not familar with R/3 very much, is there any manual or baisic guidlines how to export master data as IDOCs from R/3 ?
Thank you in advance

Hi Vytas,
to send the data from R3 system to MDM System, you need to follow procedure as mentioned below:
1. you can use the transaction "MDMGX" in R3 system to extract the refrence data to the mdm system via FTP Server.generally this transaction is used to extract the lookup tables data into the repository.
for using this, you can use the option there in transaction MDMGX as "Define repositories and FTP Server" and configure all the required details and you have to install the ftp server on MDM server.then to extract the data, there is a option as "Start Extraction" and your data will be extracted from R3 to MDM inbound port via FTP Server.
for further details about MDMGX, you can refer SAP Note No-964991.
2. to extract the main table data from R3 to MDM, you can use the transaction "MDM_CLNT_EXTR".
for detail info about this transaction, just refer the SAP Note No.-836985, 1035601, 844558.
both transaction will be used for extracting the data from R3 to MDM as per your business requirement.
I hope, this will help you.
any further info, just let me know.
Regards,
Saurabh...
Reward with points if found helpful.

Similar Messages

Not been able to export data from FDQM to target system

Hi,
Am not been able to export data from FDQM to my target system which is Hyperion Enterprise 6.4
I have imported, Validated the mapping but as soon as i click on export after creation of the export file the system throws an error as "*Error: Arguments are of the wrong type, are out of acceptable range, or are in conflict with one* *another*". Also am pasting the error log down below
** Begin Enterprise Adapter Runtime Error Log Entry [2009-08-20-16:10:27] **
ERROR:
Code.............. 10230
Description....... Data Load Errors.
Enterprise API Return Code: ALREADY_LOCKED_RO-.
Procedure......... clsHPDataManipulation.fDBLoad
Component......... upsHE6xG4A
Version........... 100
Thread............ 6028
IDENTIFICATION:
User.............. administrator
Computer Name..... HYPERION
ENTERPRISE CONNECTION:
App Name.......... GCIP_S
Connect Status.... Connection Open
GLOBALS:
Zero-For-No....... True
INI File Path..... C:\WINDOWS\HypEnt.ini
NameCat.txt Path.. C:\Hyperion\FDM\GCIP\Outbox\Logs\NameCat.txt
NameCat Entity....
NameCat Category..
NameCat Exists.... False
Any suggestions any one, what should i do

Hello,
Is it possible that the entity that you are loading to in Enterprise is locked? It appears that it may be per the below error. You can only load to unlocked intersections, so I would start by checking the catagory and entity combination for being locked.
Regards
JF

Export data from ABAP report to SAP BW system

Hi Everyone,
I have requirement to export data from the R/3 system from a ABAP report to BW system.
Currently we are planning to create a Ztable to put the data into that, but I would like to know , is there a better way to do instead of going for a Ztable.
Regards,
Shobana.K

Hi Shobana,
is possible define a data-source in RSO2 with Function module as source.
In this function module you define a table. During the loading data in BW from this datasource the system execute this function module and transfer the line of that table.
In the function module you can repeat the code of the abap program.
You can see the function module example (RSAX_BIW_GET_DATA_SIMPLE).
Regards.
Paolo Ardemagni

Export data from the R/3 system from a ABAP report to BW system

Hi Everyone,
I have requirement to export data from the R/3 system from a ABAP report to BW system.
Currently we are planning to create a Ztable to put the data into that, but I would like to know , is there a better way to do instead of going for a Ztable.
Regards,
Shobana.K

Hi Shobha,
In the second option as you mentioned sending the data to BI.
1. Check when u click on second option what is the target details that is showing?( Menas suppose if you send the data using Open Hub u will find the options like FF,Otherparty,etcc...).
2. As you mentioned if you have option to upload the data to Table.Then you can load and u can create the Generic DS.
Issues & Concern
            1. Need to think how the data will be poplated(Means how are going to maintain Delta info records table level before
               populating to it)
             2. whether Ztable should be refreshed before updating R/3 report data to Ztable.
Based on the concerns verify your scenario.If everything ok then u can proceed as per u r plan.
Regards
Ram.

Export data from database table before database migration

Hello,
We are planning to migrate our SAP ERP 6 Ehp4/NW7.01 from Oracle 11.2 to IBM DB2 v. 9.7 database. During test migrations I have established that we spend a lot of time for one particular table (COEP). Because we donu2019t have possibility to archive this table before migration I have an idea to export data from previous years from this table to the file system (using an ABAP report), delete those data from table before migration and then after migration, import back to the database from the file system.
Does anybody have any concerns or suggestions about this idea?
Thank you for your answers
Andrej

Hello Andrej,
I strongly do not recommend to do so.
I am not sure whether technically this could work at all..
Even it if would work .. In order to really save time, the export and the import would have to be a dirty one (meaning the system is operational and in production). With this there is a high risk to produce inconsistencies on this table. And you most likely will receive no support if something unforeseen happens and you end with problems.
Also your approach (if it should work at all) , would have to be tested thoroughly by you , also protecting the table from any changes.
I do not believe that this can save any effort compared to implementing advanced migration techniques like table splitting.
On top, you would go high risk to end with an unsupported system, with not using official migration procedures
Hans-Juergen

Loading of transaction data from SAP ECC system failed

Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
Holger

Hi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much!

Error while exporting data from HCM to VDS

Hi,
When i am trying to export data from the SAP HCM system using the RPLDAP_EXTRACT, the export fails and the log shows that the LDAP_CREATE failed. In the VDS log,
com.sap.idm.vds.oper.main_listener Message:
Exception on add: class java.lang.Integer:null incompatible with class
java.lang.String:null
I verified the database connectivity from VDS to IDS when seems fine since the LDAP_SEARCH is working fine.
Cheers !
Zaheer

It was a bug in SP2, it is fixed in SP2 Patch 4.
Cheers !!
Zaheer

Error while extracting data from a remote system

Hi,
I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
ORA-00604: error occurred at recursive SQL level 1
ORA-28000: the account is locked
ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
Thanks

Hi,
IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
Goto St22 see the short dump error msg..
post if there any inf..
Thanks,
Shreya

Export data from BW to oralce with open hub service.

Hi Dear all,
When I tried to export data from BW to oralce with open hub service. There is no available RFC destination for this oracle system. That means i need to create a RFC destination for the oracle server.
How can i achive this, in SM59? But U don't know much how to configure this. Is there any expert can help me there?
Kevin

Hi kevinhuang ,
RFC connection.......... You can check in SM59 tcode...Double click on the the desired Source system
or
RSA1-->Source systems and then right click on Source system and Check
To test RFC connection...RSA1 ....Source system....... Right click on desired source system >> Connection Parameter.....Test connection
Pls go thru this links,
http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
BI Open Hub Destination and data transfer process setup
http://www.ibm.com/developerworks/data/library/techarticle/dm-0802li/index.html
Hope this helps U.
Regards
Chandra Sekhar
Edited by: Chandra Sekhar T on Apr 21, 2009 3:36 PM

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

Export data from block to excel.

Hi
Does anybody know how I can export data from oracle forms to an excel worksheet. I need to provide a direct interface for a user where he fetches the data into the block and by just click a button the data from the block should go to an excel sheet.
Thanks in advance
-Samsam

Something along the following lines should help you in you are Client/Server. If you're on the Web then make sure you have WebUtil set up and add "CLIENT_" to all the OLE2 calls.
PROCEDURE P_EXCEL IS
     application ole2.Obj_Type;
     workbooks ole2.Obj_Type;
     workbook ole2.Obj_Type;
     worksheets ole2.Obj_Type;
     worksheet ole2.Obj_Type;
     args ole2.List_Type;
     cell ole2.Obj_Type;
     j INTEGER;
     k INTEGER;
     file_name_cl VARCHAR2(32767);
     item_prompt VARCHAR2(32767);
user_cancel EXCEPTION;
BEGIN
-- open the java save file dialogue box
file_name_cl := GET_FILE_NAME('H:\', 'file_name.xls', 'XLS Files (*.xls)|*.xls|', NULL, SAVE_FILE, TRUE);
file_name_cl := SUBSTR(file_name_cl,1,LENGTH(file_name_cl));
IF file_name_cl IS NULL THEN
RAISE user_cancel;
END IF;
application := ole2.create_obj('Excel.Application');
workbooks := ole2.Get_Obj_Property(application, 'Workbooks');
workbook := ole2.Invoke_Obj(workbooks, 'Add');
worksheets := ole2.Get_Obj_Property(workbook, 'Worksheets');
worksheet := ole2.Invoke_Obj(worksheets, 'Add');
go_block('EXPORT_BLOCK');
first_record;
j:=1; /* Represents row number */
k:=1; /* Represemts column number */
/* Add the column headings using item prompts */
     FOR k IN 1..10 /* Block has 10 visible columns */
LOOP
item_prompt := get_item_property(:SYSTEM.CURRENT_BLOCK||'.'||:SYSTEM.CURRENT_ITEM, prompt_text);
args:=ole2.create_arglist;
ole2.add_arg(args, j);
ole2.add_arg(args, k);
cell:=ole2.get_obj_property(worksheet, 'Cells', args);
ole2.destroy_arglist(args);
ole2.set_property(cell, 'Value', item_prompt);
ole2.release_obj(cell);
next_item;
END LOOP;
j:=j+1; /* Add to rowcount so that data won't overwrite column headings! */
LOOP
/* Add in all the data */
FOR k IN 1..10 /* Block has 10 visible columns */
LOOP
IF NOT name_in(:system.cursor_item) IS NULL THEN
args:=ole2.create_arglist;
ole2.add_arg(args, j);
ole2.add_arg(args, k);
cell:=ole2.get_obj_property(worksheet, 'Cells', args);
ole2.destroy_arglist(args);
ole2.set_property(cell, 'Value', name_in(:system.cursor_item));
ole2.release_obj(cell);
END IF;
next_item;
END LOOP;
j:=j+1;
IF :system.last_record = 'TRUE' THEN
     exit;
ELSE
     next_record;
END IF;
END LOOP;
     ole2.Release_Obj(worksheet);
     ole2.Release_Obj(worksheets);
     /* Save the Excel file created */
     args := ole2.Create_Arglist;
     ole2.Add_Arg(args, file_name_cl);
     ole2.Invoke(workbook, 'SaveAs', args);
     ole2.Destroy_Arglist(args);
     /* release workbook */
     ole2.Release_Obj(workbook);
     ole2.Release_Obj(workbooks);
     /* Release application */
     ole2.Invoke(application, 'Quit');
     ole2.Release_Obj(application);
EXCEPTION
WHEN user_cancel THEN
     RAISE;
END;

Looking for a solution or service to export data from a dynamic form into a database

As the title of this discussion states, I'm looking for a solution or service to export data from a dynamic form into a database to be used for reporting. Creating the dynamic form is not a problem, it's getting it into a database that's more of a nuisance. A dynamic form is needed in order to provide skip logic, hide/reveal, and other similar dynamic features.
The database hasn't been created, so just looking for the easiest, more effective and dependable solution. The key is being able to run reports off the data later.

So i set up 2 residential grade routers to test this out. Seems to be working okayish. I believe with directional antenae routers I should achieve what I need.
As for security I configured each device separately. I set them so only allow the MAC address of the other through wireless. This seems to be the best system for me. Once they are connected even if a MAC is spoofed of the other router it drops automatically because they are always connected. My wired devices get plugged in and recieve an IP from my main network.
There more testing to be done, but it seems to be working.
Thanks for your input and suggestions guys. I will be marking this topic as answered.

Exporting Data from one Server to Another server w/ Version Enabled Tables

Hi,
I'm currently having a problem with regards to Exporting data to another server. This is the Scenario:
Source Server is Production Server with all of its Tables in the Schema are Version-Enabled.
Destination Server is a Test Server.
I exported data from Production Server using EXP command. Then in my Test Server I imported my data using IMP command (I already created tablespace and user for the Schema).
Import is successful in my Test server but when I execute my queries, There are no rows returned.
I checked my _LT tables and it contains my data. but when I query from the View created when version was enabled, no result is returned.
Am I missing something when I exported and imported my Schema? Should I have included the WMSYS schema when I created the .dump file?
Thanks in advance.

Hi Stefan,
we tried using Export and Import using Data Pump.
expdp system/password@orcl full=y directory=dmpdir2 dumpfile=FULL_DB.dmp
impdp system/password@orcl full=y table_exists_action=truncate directory=dmpdir2 dumpfile=FULL_DB.dmp
Still the same result as using exp and imp. _LT tables have data but when you query using the View, no results are found.

Migrate PY and TM cluster data from One SAP System to another

Hi Experts,
Could you please suggest me some options to migrate PY and TM cluster data from One SAP System to another? My requirement is to move all the cluster data (Active and Inactive ees).
I see that PU12 is an option. Anybody used that to migrate between SAP systems. Please provide some details
Points guaranteed
I see that using PU12 you can export only PCL2 Clutsers. Are there any ways to move the other clusters like PCL4 ?

Hi,
As far as data transfer, If have all normal configuration settings in your targeted system you can use LSMW (Use T.code AS91 in LSMW for recording) to transfer your data in your both cases.
Hope it resolves your both the issues.
Regards,
Murali

Can not export data from form tracker

Hi there,
I have set up a lovely form for collecting data. It all comes into the Adobe Tracker and the Responses file fine.
What i wish to do is export data from the responses file into another format. I should be able to do it from the Export button on the left but it is 'blanked out' and does nothing if I push it. I can't find any details on here or the internet relating to this. And yes, there is data in the file to export .
Hoping you can help.
Many thanks in advance.

I have the same problem but... I created two forms for two separate purposes and have had responses to both.
One of them allows me to export the data and the other does not.
Does anyone out there have an answer for this seemingly random anomoly?
Regards
Sydman

Exporting data from R/3 system as IDOCs

Similar Messages

Maybe you are looking for